wiki:GeniNetworkStitchingConfirmationTestStatus/UKYMCV

University of Kentucky MCV Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The UKYMCV site advertises the following stitching details:

<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2016-01-25T18:05:11Z" >
<aggregate id="urn:publicid:IDN+mcv.sdn.uky.edu+authority+cm" url="https://www.mcv.sdn.uky.edu:12369/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
    <start type="time">2016-01-25T18:05:11Z</start>
    <end type="time">2016-01-25T18:05:11Z</end>
</lifetime>
<node id="urn:publicid:IDN+mcv.sdn.uky.edu+node+procurve2">
  <port id="urn:publicid:IDN+mcv.sdn.uky.edu+stitchport+procurve2:1.18.al2s">
    <capacity>1000000</capacity>
    <maximumReservableCapacity>1000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+mcv.sdn.uky.edu+interface+procurve2:1.18.al2s">
      <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.loui.net.internet2.edu:et-4/3/0.0:ukymcv-ig</remoteLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>1000000</capacity>
      <maximumReservableCapacity>1000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>1850-1869</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
</node>
</aggregate>
</stitching>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec IG-ST-1-al2s.rspec:

$ stitcher.py createsliver IG-ST-1 IG-ST-1-al2s.rspec -o
13:09:36 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
13:09:37 INFO    : Reading slice IG-ST-1 credential...
13:09:37 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2016-02-01 18:06:44 UTC
13:09:37 INFO    : Calling SCS...
13:09:37 INFO    : Multi-AM reservation will include resources from these aggregates:
13:09:37 INFO    : 	<Aggregate ukymcv-ig>
13:09:37 INFO    : 	<Aggregate gpo-ig>
13:09:37 INFO    : 	<Aggregate al2s>
13:09:37 INFO    : Stitcher doing createsliver at <Aggregate ukymcv-ig>...
13:09:53 INFO    : ... Allocation at <Aggregate ukymcv-ig> complete.
13:09:53 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:10:11 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:10:11 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:10:16 INFO    : ... Allocation at <Aggregate al2s> complete.
13:10:16 INFO    : All aggregates are complete.
13:10:16 INFO    : Your resources expire at 2016-01-31T17:59:37 (UTC). 
13:10:16 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UKYMCV/IG-ST-1-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UKYMCV and GPO aggregate:

$ readyToLogin.py IG-ST-1 --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 35386  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

ig-ukymcv's geni_status is: ready 
User lnevers logs in to ig-ukymcv using:
	ssh -p 30010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.mcv.sdn.uky.edu

Measurements

Iperf InstaGENI GPO VM to InstaGENI UKYMCV VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2016-01-25

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   453 MBytes  63.4 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec   141 MBytes  19.7 Mbits/sec
[  5]  0.0-60.1 sec   113 MBytes  15.8 Mbits/sec
[  7]  0.0-60.1 sec   148 MBytes  20.6 Mbits/sec
[  6]  0.0-60.3 sec   138 MBytes  19.2 Mbits/sec
[  3]  0.0-60.6 sec   144 MBytes  20.0 Mbits/sec
[SUM]  0.0-60.6 sec   684 MBytes  94.6 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 12]  0.0-60.0 sec  74.2 MBytes  10.4 Mbits/sec
[  9]  0.0-60.0 sec  65.4 MBytes  9.14 Mbits/sec
[ 11]  0.0-60.0 sec  49.6 MBytes  6.93 Mbits/sec
[  5]  0.0-60.0 sec  85.5 MBytes  11.9 Mbits/sec
[  8]  0.0-60.1 sec  74.8 MBytes  10.4 Mbits/sec
[  3]  0.0-60.1 sec  64.1 MBytes  8.96 Mbits/sec
[  7]  0.0-60.1 sec  65.9 MBytes  9.19 Mbits/sec
[  4]  0.0-60.2 sec  65.1 MBytes  9.08 Mbits/sec
[  6]  0.0-60.2 sec  83.5 MBytes  11.6 Mbits/sec
[ 10]  0.0-60.3 sec  65.6 MBytes  9.13 Mbits/sec
[SUM]  0.0-60.3 sec   694 MBytes  96.5 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI UKYMCV VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   100 Mbits/sec
[  3] Sent 512742 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   684 MBytes  95.7 Mbits/sec   0.089 ms 24823/512741 (4.8%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI UKYMCV VM

60 packets transmitted, 60 received, 0% packet loss, time 59093ms
rtt min/avg/max/mdev = 36.490/36.925/37.374/0.204 ms

Iperf InstaGENI UKYMCV VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2016-01-25

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   503 MBytes  70.2 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.1 sec   146 MBytes  20.4 Mbits/sec
[  3]  0.0-60.2 sec  77.4 MBytes  10.8 Mbits/sec
[  5]  0.0-60.3 sec  67.2 MBytes  9.36 Mbits/sec
[  4]  0.0-60.4 sec   250 MBytes  34.8 Mbits/sec
[  6]  0.0-60.6 sec   131 MBytes  18.1 Mbits/sec
[SUM]  0.0-60.6 sec   672 MBytes  92.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  86.4 MBytes  12.1 Mbits/sec
[ 10]  0.0-60.0 sec  54.5 MBytes  7.61 Mbits/sec
[ 11]  0.0-60.0 sec  80.6 MBytes  11.3 Mbits/sec
[  7]  0.0-60.1 sec  68.8 MBytes  9.60 Mbits/sec
[  6]  0.0-60.2 sec  51.5 MBytes  7.18 Mbits/sec
[ 12]  0.0-60.2 sec  72.6 MBytes  10.1 Mbits/sec
[  8]  0.0-60.4 sec  50.8 MBytes  7.05 Mbits/sec
[  9]  0.0-60.4 sec  67.2 MBytes  9.34 Mbits/sec
[  3]  0.0-60.4 sec  58.0 MBytes  8.05 Mbits/sec
[  5]  0.0-60.5 sec   106 MBytes  14.7 Mbits/sec
[SUM]  0.0-60.5 sec   696 MBytes  96.6 Mbits/sec

Iperf InstaGENI UKYMCV VM to GPO InstaGENI VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512797 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   670 MBytes  93.7 Mbits/sec   0.081 ms 34874/512796 (6.8%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI UKYMCV VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59085ms
rtt min/avg/max/mdev = 36.608/37.167/39.080/0.488 ms

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
13:27:37 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
13:27:37 INFO    : Reading slice IG-ST-2 credential...
13:27:37 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2016-02-01 18:25:56 UTC
13:27:37 INFO    : Calling SCS...
13:27:38 INFO    : Multi-AM reservation will include resources from these aggregates:
13:27:38 INFO    : 	<Aggregate ukymcv-ig>
13:27:38 INFO    : 	<Aggregate gpo-ig>
13:27:38 INFO    : 	<Aggregate al2s>
13:27:38 INFO    : Stitcher doing createsliver at <Aggregate ukymcv-ig>...
13:27:55 INFO    : ... Allocation at <Aggregate ukymcv-ig> complete.
13:27:55 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:28:11 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:28:11 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:28:19 INFO    : ... Allocation at <Aggregate al2s> complete.
13:28:19 INFO    : All aggregates are complete.
13:28:19 INFO    : Your resources expire at 2016-01-31T18:17:38 (UTC). 
13:28:19 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UKYMCV/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each UKYMCV and GPO aggregate:

$ readyToLogin.py IG-ST-2 --useSliceAggregates ukymcv-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 36154  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

ig-ukymcv's geni_status is: ready 
User lnevers logs in to ig-ukymcv using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.mcv.sdn.uky.edu

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

lnevers@ig-gpo:~$ ping 10.10.4.2 -c 60 -q
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.
--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59089ms
rtt min/avg/max/mdev = 36.741/37.939/76.776/5.208 ms

lnevers@ig-gpo:~$ ping 192.168.4.2 -c 60 -q
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.
--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59071ms
rtt min/avg/max/mdev = 36.698/37.846/76.869/5.113 ms
lnevers@ig-gpo:~$ 

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
13:51:07 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
13:51:07 INFO    : Reading slice IG-ST-3 credential...
13:51:08 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2016-02-01 18:41:42 UTC
13:51:08 INFO    : Calling SCS...
13:51:08 INFO    : Multi-AM reservation will include resources from these aggregates:
13:51:08 INFO    : 	<Aggregate cwru-ig>
13:51:08 INFO    : 	<Aggregate gpo-ig>
13:51:08 INFO    : 	<Aggregate al2s>
13:51:08 INFO    : 	<Aggregate ukymcv-ig>
13:51:08 INFO    : Stitcher doing createsliver at <Aggregate cwru-ig>...
13:51:25 INFO    : ... Allocation at <Aggregate cwru-ig> complete.
13:51:25 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:51:39 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:51:40 INFO    : Stitcher doing createsliver at <Aggregate ukymcv-ig>...
13:51:56 INFO    : ... Allocation at <Aggregate ukymcv-ig> complete.
13:51:56 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:52:05 INFO    : ... Allocation at <Aggregate al2s> complete.
13:52:05 INFO    : All aggregates are complete.
13:52:05 INFO    : Your resources expire at 2016-01-31T18:41:08 (UTC). 
13:52:05 INFO    : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UKYMCV/IG-ST-3-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the UKYMCV host:

$ readyToLogin.py IG-ST-3 --useSliceAggregates ukymcv-ig
  ....
ig-cw's geni_status is: ready 
User lnevers logs in to ig-cw using:
	ssh -p 32826  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.geni.case.edu

ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 36410  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

ig-ukymcv's geni_status is: ready 
User lnevers logs in to ig-ukymcv using:
	ssh -p 30522  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.mcv.sdn.uky.edu

Login to the UKYMCV host and ping each remote:

#ping GPO IG 
lnevers@ig-ukymcv:~$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59035ms
rtt min/avg/max/mdev = 36.653/37.874/77.120/5.145 ms

# Utah IG
lnevers@ig-ukymcv:~$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.
--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59081ms
rtt min/avg/max/mdev = 20.790/21.424/45.404/3.124 ms

IG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec. A link capacity of 100 Mbps is used between IG and EG.

$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o 
13:47:46 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
13:47:47 INFO    : Reading slice IG-ST-4 credential...
13:47:47 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2016-02-01 18:47:45 UTC
13:47:47 INFO    : Calling SCS...
13:47:48 INFO    : Multi-AM reservation will include resources from these aggregates:
13:47:48 INFO    : 	<Aggregate ukymcv-ig>
13:47:48 INFO    : 	<Aggregate al2s>
13:47:48 INFO    : 	<Aggregate gpo-eg>
13:47:48 INFO    : Stitcher doing createsliver at <Aggregate ukymcv-ig>...
13:48:03 INFO    : ... Allocation at <Aggregate ukymcv-ig> complete.
13:48:03 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
13:48:14 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
13:48:14 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:48:18 INFO    : ... Allocation at <Aggregate al2s> complete.
13:48:18 INFO    : All aggregates are complete.
13:48:18 INFO    : Your resources expire at 2016-01-31T18:37:48 (UTC). 
13:48:18 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UKYMCV/IG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UKYMCV and GPO aggregate:

$ readyToLogin.py IG-ST-4 --useSliceAggregates 
  ....
eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.13

ig-ukymcv's geni_status is: ready 
User lnevers logs in to ig-ukymcv using:
	ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.mcv.sdn.uky.edu

Measurements

Iperf ExoGENI GPO VM to InstaGENI UKYMCV VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2016-01-25

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.2 sec   141 MBytes  19.6 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.3 sec  21.8 MBytes  3.03 Mbits/sec
[  5]  0.0-60.5 sec  34.0 MBytes  4.71 Mbits/sec
[  3]  0.0-60.7 sec  24.0 MBytes  3.32 Mbits/sec
[  7]  0.0-60.8 sec  35.4 MBytes  4.88 Mbits/sec
[  6]  0.0-60.9 sec  26.6 MBytes  3.67 Mbits/sec
[SUM]  0.0-60.9 sec   142 MBytes  19.5 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.4 sec  12.0 MBytes  1.67 Mbits/sec
[  8]  0.0-60.5 sec  13.8 MBytes  1.91 Mbits/sec
[  9]  0.0-60.5 sec  17.9 MBytes  2.48 Mbits/sec
[ 10]  0.0-60.6 sec  10.8 MBytes  1.49 Mbits/sec
[  4]  0.0-60.7 sec  18.0 MBytes  2.49 Mbits/sec
[  6]  0.0-60.8 sec  12.1 MBytes  1.67 Mbits/sec
[ 11]  0.0-61.0 sec  12.1 MBytes  1.67 Mbits/sec
[ 12]  0.0-61.0 sec  17.2 MBytes  2.37 Mbits/sec
[  3]  0.0-61.2 sec  14.2 MBytes  1.95 Mbits/sec
[  7]  0.0-61.4 sec  11.4 MBytes  1.55 Mbits/sec
[SUM]  0.0-61.4 sec   140 MBytes  19.1 Mbits/sec

Iperf ExoGENI GPO VM to InstaGENI UKYMCV VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512820 datagrams
[  3] Server Report:
[  3]  0.0-60.6 sec   140 MBytes  19.4 Mbits/sec   0.136 ms 412630/512816 (80%)
[  3]  0.0-60.6 sec  1 datagrams received out-of-order

Ping from ExoGENI GPO VM to the InstaGENI UKYMCV VM

60 packets transmitted, 60 received, 0% packet loss, time 59077ms
rtt min/avg/max/mdev = 36.847/37.296/41.476/0.718 ms

Iperf InstaGENI UKYMCV VM to ExoGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2016-01-25

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   140 MBytes  19.6 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.3 sec  29.9 MBytes  4.16 Mbits/sec
[  6]  0.0-60.3 sec  23.8 MBytes  3.30 Mbits/sec
[  3]  0.0-60.4 sec  24.8 MBytes  3.44 Mbits/sec
[  7]  0.0-60.5 sec  26.4 MBytes  3.66 Mbits/sec
[  5]  0.0-60.5 sec  36.5 MBytes  5.06 Mbits/sec
[SUM]  0.0-60.5 sec   141 MBytes  19.6 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.6 sec  13.9 MBytes  1.92 Mbits/sec
[ 11]  0.0-60.6 sec  11.5 MBytes  1.59 Mbits/sec
[  3]  0.0-60.7 sec  16.6 MBytes  2.30 Mbits/sec
[  4]  0.0-60.7 sec  18.0 MBytes  2.49 Mbits/sec
[  5]  0.0-60.8 sec  14.0 MBytes  1.93 Mbits/sec
[  9]  0.0-60.9 sec  12.9 MBytes  1.77 Mbits/sec
[ 12]  0.0-60.9 sec  15.2 MBytes  2.10 Mbits/sec
[ 10]  0.0-61.0 sec  13.9 MBytes  1.91 Mbits/sec
[  8]  0.0-61.0 sec  15.0 MBytes  2.06 Mbits/sec
[  6]  0.0-61.3 sec  11.4 MBytes  1.56 Mbits/sec
[SUM]  0.0-61.3 sec   142 MBytes  19.5 Mbits/sec

Iperf InstaGENI UKYMCV VM to ExoGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512788 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  14.727 ms 413559/512785 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI UKYMCV VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59083ms
rtt min/avg/max/mdev = 36.715/37.218/38.290/0.356 ms

IG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the UKYMCV Aggregate page.
  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANspage . http://groups.geni.net/geni/ticket/1497
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. Added site to the list of GENI Network Stitching Sites. (ON HOLD till Site Confirmation Tests are completed)

IG-ST-6 New Site OpenFlow topology

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

09:09:02 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
09:09:03 INFO    : Reading slice IG-ST-6 credential...
09:09:03 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2016-02-01 19:29:43 UTC
09:09:03 INFO    : Calling SCS...
09:09:04 INFO    : Multi-AM reservation will include resources from these aggregates:
09:09:04 INFO    : 	<Aggregate ukymcv-ig>
09:09:04 INFO    : 	<Aggregate gpo-ig>
09:09:04 INFO    : 	<Aggregate al2s>
09:09:04 INFO    : Stitcher doing createsliver at <Aggregate ukymcv-ig>...
09:09:19 INFO    : ... Allocation at <Aggregate ukymcv-ig> complete.
09:09:19 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
09:09:36 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
09:09:36 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
09:09:40 INFO    : ... Allocation at <Aggregate al2s> complete.
09:09:40 INFO    : All aggregates are complete.
09:09:40 INFO    : Your resources expire at 2016-02-01T13:59:04 (UTC). 
09:09:40 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UKYMCV/IG-ST-6-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-6 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UKYMCV and GPO aggregate:

$ readyToLogin.py IG-ST-6 --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 37178  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

ig-ukymcv's geni_status is: ready 
User lnevers logs in to ig-ukymcv using:
	ssh -p 31290  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.mcv.sdn.uky.edu

Measurements

Iperf InstaGENI GPO VM to InstaGENI UKYMCV VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2016-01-26

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.4 sec   531 MBytes  73.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec   106 MBytes  14.8 Mbits/sec
[  5]  0.0-60.1 sec  90.8 MBytes  12.7 Mbits/sec
[  4]  0.0-60.5 sec   243 MBytes  33.7 Mbits/sec
[  3]  0.0-60.7 sec   129 MBytes  17.9 Mbits/sec
[  7]  0.0-61.2 sec  89.4 MBytes  12.2 Mbits/sec
[SUM]  0.0-61.2 sec   658 MBytes  90.2 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.8 sec  61.2 MBytes  8.59 Mbits/sec
[  7]  0.0-60.3 sec  83.9 MBytes  11.7 Mbits/sec
[  8]  0.0-60.4 sec  92.6 MBytes  12.9 Mbits/sec
[ 11]  0.0-60.4 sec  49.8 MBytes  6.91 Mbits/sec
[ 12]  0.0-60.6 sec  45.6 MBytes  6.31 Mbits/sec
[ 10]  0.0-60.7 sec  52.0 MBytes  7.18 Mbits/sec
[  9]  0.0-60.8 sec  78.8 MBytes  10.9 Mbits/sec
[  6]  0.0-60.9 sec  70.0 MBytes  9.64 Mbits/sec
[  3]  0.0-61.0 sec  84.0 MBytes  11.5 Mbits/sec
[  5]  0.0-62.3 sec  62.8 MBytes  8.45 Mbits/sec
[SUM]  0.0-62.3 sec   681 MBytes  91.7 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI UKYMCV VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512791 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   668 MBytes  93.3 Mbits/sec   0.116 ms 36360/512790 (7.1%)
[  3]  0.0-60.0 sec  66 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI UKYMCV VM

60 packets transmitted, 60 received, 0% packet loss, time 59089ms
rtt min/avg/max/mdev = 36.756/48.544/549.150/67.665 ms

Iperf InstaGENI UKYMCV VM to InstaGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2016-01-26

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-61.0 sec   526 MBytes  72.4 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.8 sec   146 MBytes  20.5 Mbits/sec
[  3]  0.0-59.8 sec  94.9 MBytes  13.3 Mbits/sec
[  5]  0.0-60.0 sec   124 MBytes  17.3 Mbits/sec
[  7]  0.0-60.0 sec   110 MBytes  15.3 Mbits/sec
[  6]  0.0-60.6 sec   204 MBytes  28.2 Mbits/sec
[SUM]  0.0-60.6 sec   678 MBytes  93.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-59.0 sec  55.4 MBytes  7.88 Mbits/sec
[  4]  0.0-59.1 sec  76.1 MBytes  10.8 Mbits/sec
[  7]  0.0-59.2 sec  63.4 MBytes  8.98 Mbits/sec
[  5]  0.0-59.4 sec  72.4 MBytes  10.2 Mbits/sec
[  8]  0.0-59.6 sec  58.2 MBytes  8.20 Mbits/sec
[ 11]  0.0-59.8 sec  63.8 MBytes  8.94 Mbits/sec
[ 10]  0.0-60.2 sec  69.6 MBytes  9.71 Mbits/sec
[  6]  0.0-60.2 sec  67.8 MBytes  9.45 Mbits/sec
[ 12]  0.0-60.3 sec  54.6 MBytes  7.60 Mbits/sec
[  9]  0.0-60.8 sec  97.1 MBytes  13.4 Mbits/sec
[SUM]  0.0-60.8 sec   678 MBytes  93.6 Mbits/sec

Iperf InstaGENI UKYMCV VM to InstaGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512784 datagrams
[  3] Server Report:
[  3]  0.0-59.9 sec   684 MBytes  95.8 Mbits/sec   0.074 ms 24921/512783 (4.9%)
[  3]  0.0-59.9 sec  79 datagrams received out-of-order

Ping from InstaGENI UKYMCV VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59089ms
rtt min/avg/max/mdev = 36.503/47.716/469.217/58.061 ms

Email help@geni.net for GENI support or email me with feedback on this page!
Last modified 4 years ago Last modified on 02/22/16 10:39:43