[[PageOutline]] = University of Kentucky InstaGENI Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == IG-ST-1 New Site to GPO IG topology == The UKY site advertises the following stitching details: {{{ protogeni chainANDTree false false 2015-04-06T20:12:29Z 2015-04-06T20:12:29Z 1000000 1000000 1000 1 urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.atla.net.internet2.edu:eth15/1:uky-ig 10 1000000 1000000 1000 1 l2sc ethernet 1500 1810-1829 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UKY/IG-ST-1-al2s.rspec IG-ST-1-al2s.rspec]: {{{ stitcher createsliver IG-ST-1 IG-ST-1-al2s.rspec 16:00:05 INFO : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf 16:00:05 INFO : Reading slice IG-ST-1 credential... 16:00:05 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2015-04-09 16:57:03 UTC 16:00:05 INFO : Calling SCS... 16:00:06 INFO : Multi-AM reservation will include resources from these aggregates: 16:00:06 INFO : 16:00:06 INFO : 16:00:06 INFO : 16:00:06 INFO : Stitcher doing createsliver at ... 16:00:21 INFO : ... Allocation at complete. 16:00:21 INFO : Stitcher doing createsliver at ... 16:00:36 INFO : ... Allocation at complete. 16:00:36 INFO : Stitcher doing createsliver at ... 16:00:41 INFO : ... Allocation at complete. 16:00:41 INFO : All aggregates are complete. 16:00:41 INFO : Your resources expire at 2015-04-08T19:50:06 (UTC). 16:00:41 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/UKY/IG-ST-1-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each UKY and GPO aggregate: {{{ $ readyToLogin.py IG-ST-1 --useSliceAggregates .... ig-gpo's geni_status is: changing User lnevers logs in to ig-gpo using: ssh -p 34362 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com ... ig-uky's geni_status is: ready User lnevers logs in to ig-uky using: ssh -p 31290 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.lan.sdn.uky.edu }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI UKY VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-04-06'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 147 MBytes 20.5 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.2 sec 30.5 MBytes 4.25 Mbits/sec [ 4] 0.0-60.2 sec 29.8 MBytes 4.15 Mbits/sec [ 3] 0.0-60.3 sec 36.0 MBytes 5.00 Mbits/sec [ 7] 0.0-60.4 sec 26.2 MBytes 3.65 Mbits/sec [ 6] 0.0-60.4 sec 23.0 MBytes 3.19 Mbits/sec [SUM] 0.0-60.4 sec 146 MBytes 20.2 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.1 sec 14.8 MBytes 2.06 Mbits/sec [ 3] 0.0-60.3 sec 16.1 MBytes 2.24 Mbits/sec [ 12] 0.0-60.4 sec 17.2 MBytes 2.39 Mbits/sec [ 10] 0.0-60.5 sec 7.12 MBytes 988 Kbits/sec [ 6] 0.0-60.6 sec 8.88 MBytes 1.23 Mbits/sec [ 7] 0.0-60.7 sec 15.1 MBytes 2.09 Mbits/sec [ 5] 0.0-60.8 sec 17.2 MBytes 2.38 Mbits/sec [ 11] 0.0-60.9 sec 16.8 MBytes 2.31 Mbits/sec [ 9] 0.0-61.0 sec 13.4 MBytes 1.84 Mbits/sec [ 8] 0.0-61.6 sec 20.5 MBytes 2.79 Mbits/sec [SUM] 0.0-61.6 sec 147 MBytes 20.0 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI UKY VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512809 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec 5.882 ms 413600/512805 (81%) [ 3] 0.0-60.1 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the InstaGENI UKY VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59068ms rtt min/avg/max/mdev = 40.156/40.642/42.254/0.283 ms }}} '''Iperf InstaGENI UKY VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-04-06'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 142 MBytes 19.8 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.2 sec 36.0 MBytes 5.02 Mbits/sec [ 4] 0.0-60.3 sec 35.5 MBytes 4.94 Mbits/sec [ 3] 0.0-60.4 sec 21.8 MBytes 3.02 Mbits/sec [ 6] 0.0-60.8 sec 30.4 MBytes 4.19 Mbits/sec [ 7] 0.0-60.9 sec 22.0 MBytes 3.03 Mbits/sec [SUM] 0.0-60.9 sec 146 MBytes 20.1 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-59.4 sec 14.9 MBytes 2.10 Mbits/sec [ 3] 0.0-59.5 sec 13.8 MBytes 1.94 Mbits/sec [ 5] 0.0-59.8 sec 17.8 MBytes 2.49 Mbits/sec [ 10] 0.0-60.1 sec 7.38 MBytes 1.03 Mbits/sec [ 11] 0.0-60.4 sec 23.0 MBytes 3.19 Mbits/sec [ 4] 0.0-60.8 sec 17.6 MBytes 2.43 Mbits/sec [ 7] 0.0-61.0 sec 17.0 MBytes 2.34 Mbits/sec [ 12] 0.0-61.1 sec 14.8 MBytes 2.02 Mbits/sec [ 8] 0.0-61.4 sec 9.88 MBytes 1.35 Mbits/sec [ 9] 0.0-61.4 sec 11.9 MBytes 1.62 Mbits/sec [SUM] 0.0-61.4 sec 148 MBytes 20.2 Mbits/sec }}} '''Iperf InstaGENI UKY VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512809 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 139 MBytes 19.5 Mbits/sec 0.125 ms 413541/512806 (81%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI UKY VM to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59056ms rtt min/avg/max/mdev = 40.295/40.704/43.605/0.563 ms }}} == IG-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UKY/IG-ST-2.rspec IG-ST-2.rspec]: {{{ $ stitcher createsliver IG-ST-2 IG-ST-2.rspec 16:12:03 INFO : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf 16:12:03 INFO : Reading slice IG-ST-2 credential... 16:12:03 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2015-04-13 20:11:51 UTC 16:12:03 INFO : Calling SCS... 16:12:06 INFO : Multi-AM reservation will include resources from these aggregates: 16:12:06 INFO : 16:12:06 INFO : 16:12:06 INFO : 16:12:06 INFO : Stitcher doing createsliver at ... 16:12:22 INFO : ... Allocation at complete. 16:12:22 INFO : Stitcher doing createsliver at ... 16:12:40 INFO : ... Allocation at complete. 16:12:40 INFO : Stitcher doing createsliver at ... 16:12:47 INFO : ... Allocation at complete. 16:12:47 INFO : All aggregates are complete. 16:12:47 INFO : Your resources expire at 2015-04-12T20:02:06 (UTC). 16:12:47 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/UKY/IG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each UKY and GPO aggregate: {{{ $ readyToLogin.py IG-ST-2 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 34618 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com .... ig-uky's geni_status is: ready User lnevers logs in to ig-uky using: ssh -p 34874 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.lan.sdn.uky.edu }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ $ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" 1. Find login Info for hosts in slice IG-ST-2 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59101ms rtt min/avg/max/mdev = 40.332/41.343/83.993/5.562 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59101ms rtt min/avg/max/mdev = 40.216/41.361/84.075/5.573 ms ... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo }}} == IG-ST-3 IG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UKY/IG-ST-3.rspec IG-ST-3.rspec]: {{{ $ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o 16:16:06 INFO : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf 16:16:06 INFO : Reading slice IG-ST-3 credential... 16:16:06 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2015-04-13 20:16:00 UTC 16:16:06 INFO : Calling SCS... 16:16:09 INFO : Multi-AM reservation will include resources from these aggregates: 16:16:09 INFO : 16:16:09 INFO : 16:16:09 INFO : 16:16:09 INFO : 16:16:09 INFO : Stitcher doing createsliver at ... 16:16:25 INFO : ... Allocation at complete. 16:16:25 INFO : Stitcher doing createsliver at ... 16:16:41 INFO : ... Allocation at complete. 16:16:41 INFO : Stitcher doing createsliver at ... 16:17:00 INFO : ... Allocation at complete. 16:17:00 INFO : Stitcher doing createsliver at ... 16:17:07 INFO : ... Allocation at complete. 16:17:07 INFO : All aggregates are complete. 16:17:07 INFO : Your resources expire at 2015-04-12T20:06:09 (UTC). 16:17:07 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UKY/IG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the UKY host: {{{ $ readyToLogin.py IG-ST-3 -a uky-ig .... ig-uky's geni_status is: ready User lnevers logs in to ig-uky using: ssh -p 35130 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.lan.sdn.uky.edu }}} Login to the UKY host and ping each remote: {{{ #ping GPO IG lnevers@ig-uky:~$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59102ms rtt min/avg/max/mdev = 40.358/40.790/45.628/0.742 ms # UKYPKS2 IG lnevers@ig-uky:~$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59088ms rtt min/avg/max/mdev = 39.029/39.436/43.377/0.536 ms lnevers@ig-uky:~$ }}} == IG-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UKY/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG. {{{ $ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o 16:19:09 INFO : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf 16:19:09 INFO : Reading slice IG-ST-4 credential... 16:19:09 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2015-04-13 20:19:04 UTC 16:19:09 INFO : Calling SCS... 16:19:11 INFO : Multi-AM reservation will include resources from these aggregates: 16:19:11 INFO : 16:19:11 INFO : 16:19:11 INFO : 16:19:11 INFO : Stitcher doing createsliver at ... 16:19:28 INFO : ... Allocation at complete. 16:19:28 INFO : Stitcher doing createsliver at ... 16:19:45 INFO : ... Allocation at complete. 16:19:45 INFO : Stitcher doing createsliver at ... 16:19:50 INFO : ... Allocation at complete. 16:19:50 INFO : All aggregates are complete. 16:19:50 INFO : Your resources expire at 2015-04-12T20:09:11 (UTC). 16:19:50 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/UKY/IG-ST-4-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each UKY and GPO aggregate: {{{ $ readyToLogin.py IG-ST-4 --useSliceAggregates .... eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.5 .... ig-uky's geni_status is: ready User lnevers logs in to ig-uky using: ssh -p 35642 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.lan.sdn.uky.edu }}} === Measurements === '''Iperf ExoGENI GPO VM to InstaGENI UKY VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2015-04-06'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 140 MBytes 19.6 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.2 sec 27.5 MBytes 3.83 Mbits/sec [ 5] 0.0-60.3 sec 30.8 MBytes 4.27 Mbits/sec [ 7] 0.0-60.5 sec 27.0 MBytes 3.75 Mbits/sec [ 3] 0.0-60.6 sec 28.8 MBytes 3.98 Mbits/sec [ 6] 0.0-60.7 sec 26.5 MBytes 3.66 Mbits/sec [SUM] 0.0-60.7 sec 140 MBytes 19.4 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.4 sec 13.6 MBytes 1.89 Mbits/sec [ 9] 0.0-60.7 sec 14.2 MBytes 1.97 Mbits/sec [ 8] 0.0-60.7 sec 13.6 MBytes 1.88 Mbits/sec [ 4] 0.0-60.8 sec 13.5 MBytes 1.86 Mbits/sec [ 5] 0.0-60.8 sec 15.2 MBytes 2.10 Mbits/sec [ 10] 0.0-60.8 sec 15.0 MBytes 2.07 Mbits/sec [ 3] 0.0-60.8 sec 13.5 MBytes 1.86 Mbits/sec [ 7] 0.0-60.9 sec 13.4 MBytes 1.84 Mbits/sec [ 6] 0.0-61.0 sec 13.9 MBytes 1.91 Mbits/sec [ 11] 0.0-61.2 sec 14.4 MBytes 1.97 Mbits/sec [SUM] 0.0-61.2 sec 140 MBytes 19.2 Mbits/sec }}} '''Iperf ExoGENI GPO VM to InstaGENI UKY VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512818 datagrams [ 3] Server Report: [ 3] 0.0-60.5 sec 140 MBytes 19.5 Mbits/sec 0.126 ms 412684/512814 (80%) }}} '''Ping from ExoGENI GPO VM to the InstaGENI UKY VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59101ms rtt min/avg/max/mdev = 40.454/40.657/41.012/0.158 ms }}} '''Iperf InstaGENI UKY VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-04-06'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 143 MBytes 20.0 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.2 sec 31.2 MBytes 4.36 Mbits/sec [ 3] 0.0-60.2 sec 25.1 MBytes 3.50 Mbits/sec [ 5] 0.0-60.7 sec 26.2 MBytes 3.63 Mbits/sec [ 6] 0.0-61.0 sec 34.6 MBytes 4.76 Mbits/sec [ 4] 0.0-61.3 sec 29.0 MBytes 3.97 Mbits/sec [SUM] 0.0-61.3 sec 146 MBytes 20.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 9] 0.0-59.2 sec 17.6 MBytes 2.50 Mbits/sec [ 5] 0.0-59.3 sec 12.8 MBytes 1.80 Mbits/sec [ 8] 0.0-59.5 sec 21.0 MBytes 2.96 Mbits/sec [ 4] 0.0-59.8 sec 15.2 MBytes 2.14 Mbits/sec [ 11] 0.0-60.0 sec 13.5 MBytes 1.89 Mbits/sec [ 7] 0.0-60.3 sec 12.9 MBytes 1.79 Mbits/sec [ 10] 0.0-60.3 sec 15.0 MBytes 2.09 Mbits/sec [ 6] 0.0-60.4 sec 10.9 MBytes 1.51 Mbits/sec [ 3] 0.0-60.5 sec 12.9 MBytes 1.78 Mbits/sec [ 12] 0.0-61.5 sec 13.8 MBytes 1.88 Mbits/sec [SUM] 0.0-61.5 sec 146 MBytes 19.9 Mbits/sec }}} '''Iperf InstaGENI UKY VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512804 datagrams [ 3] Server Report: [ 3] 0.0-60.3 sec 139 MBytes 19.4 Mbits/sec 14.585 ms 413435/512801 (81%) [ 3] 0.0-60.3 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI UKY VM to ExoGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59103ms rtt min/avg/max/mdev = 40.395/40.664/41.111/0.153 ms }}} == IG-ST-5 Site Information == Various pages include stitching information for a site. Each of the following were verified for this site: 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/KentuckyInstaGENI#GENINetworkStitching UKY Aggregate] page. 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs]. 3. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found. 4. Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. == IG-ST-6 New Site !OpenFlow topology == Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UKY/IG-ST-6.rspec IG-ST-6.rspec]: {{{ $ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o 16:32:50 INFO : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf 16:32:50 INFO : Reading slice IG-ST-6 credential... 16:32:50 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2015-04-13 20:32:46 UTC 16:32:50 INFO : Calling SCS... 16:32:51 INFO : Multi-AM reservation will include resources from these aggregates: 16:32:51 INFO : 16:32:51 INFO : 16:32:51 INFO : 16:32:51 INFO : Stitcher doing createsliver at ... 16:33:09 INFO : ... Allocation at complete. 16:33:09 INFO : Stitcher doing createsliver at ... 16:33:27 INFO : ... Allocation at complete. 16:33:27 INFO : Stitcher doing createsliver at ... 16:33:36 INFO : ... Allocation at complete. 16:33:36 INFO : All aggregates are complete. 16:33:36 INFO : Your resources expire at 2015-04-12T20:22:51 (UTC). 16:33:36 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/UKY/IG-ST-6-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-6 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each UKY and GPO aggregate: {{{ $ readyToLogin.py IG-ST-6 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 31034 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com ... ig-uky's geni_status is: changing User lnevers logs in to ig-uky using: ssh -p 31290 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.lan.sdn.uky.edu }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI UKY VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-04-06'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-70.1 sec 108 MBytes 12.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-59.8 sec 21.0 MBytes 2.94 Mbits/sec [ 7] 0.0-60.8 sec 43.1 MBytes 5.95 Mbits/sec [ 5] 0.0-61.2 sec 20.1 MBytes 2.76 Mbits/sec [ 6] 0.0-61.6 sec 29.6 MBytes 4.04 Mbits/sec [ 3] 0.0-61.7 sec 30.2 MBytes 4.12 Mbits/sec [SUM] 0.0-61.7 sec 144 MBytes 19.6 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.5 sec 10.9 MBytes 1.51 Mbits/sec [ 8] 0.0-60.5 sec 15.0 MBytes 2.08 Mbits/sec [ 11] 0.0-60.8 sec 10.1 MBytes 1.40 Mbits/sec [ 5] 0.0-60.9 sec 17.0 MBytes 2.34 Mbits/sec [ 4] 0.0-61.0 sec 11.8 MBytes 1.62 Mbits/sec [ 12] 0.0-61.5 sec 13.9 MBytes 1.89 Mbits/sec [ 10] 0.0-61.6 sec 14.9 MBytes 2.02 Mbits/sec [ 3] 0.0-61.7 sec 15.6 MBytes 2.12 Mbits/sec [ 6] 0.0-62.1 sec 16.4 MBytes 2.21 Mbits/sec [ 9] 0.0-62.2 sec 21.0 MBytes 2.83 Mbits/sec [SUM] 0.0-62.2 sec 146 MBytes 19.8 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI UKY VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512811 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 17.145 ms 413736/512806 (81%) [ 3] 0.0-60.2 sec 64 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to InstaGENI UKY VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59102ms rtt min/avg/max/mdev = 40.232/47.651/254.382/32.700 ms }}} '''Iperf InstaGENI UKY VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-04-06'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.8 sec 140 MBytes 19.3 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.3 sec 26.9 MBytes 3.74 Mbits/sec [ 7] 0.0-60.7 sec 34.4 MBytes 4.75 Mbits/sec [ 4] 0.0-60.8 sec 30.5 MBytes 4.21 Mbits/sec [ 5] 0.0-61.4 sec 25.2 MBytes 3.45 Mbits/sec [ 3] 0.0-61.9 sec 27.4 MBytes 3.71 Mbits/sec [SUM] 0.0-61.9 sec 144 MBytes 19.6 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 8] 0.0-59.6 sec 12.4 MBytes 1.74 Mbits/sec [ 12] 0.0-60.3 sec 14.5 MBytes 2.02 Mbits/sec [ 4] 0.0-60.3 sec 7.00 MBytes 973 Kbits/sec [ 6] 0.0-60.9 sec 11.9 MBytes 1.63 Mbits/sec [ 3] 0.0-61.0 sec 21.0 MBytes 2.89 Mbits/sec [ 5] 0.0-61.5 sec 21.1 MBytes 2.88 Mbits/sec [ 10] 0.0-61.6 sec 8.62 MBytes 1.17 Mbits/sec [ 9] 0.0-62.0 sec 20.5 MBytes 2.77 Mbits/sec [ 11] 0.0-62.1 sec 19.8 MBytes 2.67 Mbits/sec [ 7] 0.0-62.2 sec 10.6 MBytes 1.43 Mbits/sec [SUM] 0.0-62.2 sec 147 MBytes 19.9 Mbits/sec }}} '''Iperf InstaGENI UKY VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512805 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.3 Mbits/sec 11.454 ms 413760/512804 (81%) [ 3] 0.0-60.2 sec 67 datagrams received out-of-order }}} '''Ping from InstaGENI UKY VM to InstaGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59101ms rtt min/avg/max/mdev = 40.250/46.489/210.411/26.652 ms }}} ------ {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}