[[PageOutline]]
= University of California at San Diego Stitching Confirmation Tests =
This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page.
== IG-ST-1 New Site to GPO IG topology ==
The UCSD site advertises the following stitching details:
{{{
protogeni
chainANDTree
false
false
2017-06-01T18:04:30Z
2017-06-01T18:04:30Z
1000000
1000000
1000
1
urn:publicid:IDN+al2s.internet2.edu+interface+rtsw.losa.net.internet2.edu:et-2/3/0.0:ucsd-ig
10
1000000
1000000
1000
1
l2sc
ethernet
1500
1720-1739
false
}}}
Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UCSD/IG-ST-1.rspec IG-ST-1.rspec]:
{{{
$ stitcher.py createsliver IG-ST-1 IG-ST-1.rspec -o
14:03:26 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
14:03:26 INFO : Reading slice IG-ST-1 credential...
14:03:26 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2017-06-08 18:03:18 UTC
14:03:26 INFO : Calling SCS...
14:03:29 INFO : Multi-AM reservation will include resources from these aggregates:
14:03:29 INFO :
14:03:29 INFO :
14:03:29 INFO :
14:03:29 INFO : Stitcher doing createsliver at ...
14:03:48 INFO : ... Allocation at complete.
14:03:48 INFO : Stitcher doing createsliver at ...
14:04:09 INFO : ... Allocation at complete.
14:04:09 INFO : Stitcher doing createsliver at ...
14:04:11 ERROR : {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3731', 'code': {'geni_code': 24}}
14:04:11 INFO : Deleting some reservations to retry, avoiding failed VLAN...
14:04:11 INFO : Doing deletesliver at ...
14:05:39 ERROR : {'output': 'start/restart in progress; try again later', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+7c03fd8bdf3c39c6a5763d349dc3a9f2', 'am_type': 'protogeni', 'geni_code': 14, 'am_code': 14, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=7c03fd8bdf3c39c6a5763d349dc3a9f2'}, 'value': 0}
14:05:49 INFO : ... aggregate was busy, will retry ...
14:06:34 INFO : ... done.
14:06:34 INFO : Will put back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at ....
14:06:34 INFO : Pausing for 30 seconds for Aggregates to free up resources...
14:07:04 INFO : Checking that prior reservation at has been cleared up....
14:07:06 ERROR : {'output': 'No slice or aggregate here', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+b1dc946d87839657a155b00d22e07f6d', 'am_type': 'protogeni', 'geni_code': 12, 'am_code': 12, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=b1dc946d87839657a155b00d22e07f6d'}, 'value': 0}
14:07:06 INFO : ... it is, so can try a new reservation.
14:07:06 INFO : Stitcher doing createsliver at ...
14:07:44 INFO : ... Allocation at complete.
14:07:44 INFO : Stitcher doing createsliver at ...
14:07:46 ERROR : {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3748', 'code': {'geni_code': 24}}
14:07:46 INFO : Deleting some reservations to retry, avoiding failed VLAN...
14:07:46 INFO : Doing deletesliver at ...
14:09:13 ERROR : {'output': 'start/restart in progress; try again later', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+466facd3cbbf93ca0e86ac5304ea0f15', 'am_type': 'protogeni', 'geni_code': 14, 'am_code': 14, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=466facd3cbbf93ca0e86ac5304ea0f15'}, 'value': 0}
14:09:23 INFO : ... aggregate was busy, will retry ...
14:10:30 INFO : ... done.
14:10:30 INFO : Will put back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at ....
14:10:30 INFO : Pausing for 30 seconds for Aggregates to free up resources...
14:11:00 INFO : Checking that prior reservation at has been cleared up....
14:11:02 ERROR : {'output': 'No slice or aggregate here', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+e459c340d29965db34fb7c7e473be4b4', 'am_type': 'protogeni', 'geni_code': 12, 'am_code': 12, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=e459c340d29965db34fb7c7e473be4b4'}, 'value': 0}
14:11:02 INFO : ... it is, so can try a new reservation.
14:11:02 INFO : Stitcher doing createsliver at ...
14:11:43 INFO : ... Allocation at complete.
14:11:43 INFO : Stitcher doing createsliver at ...
14:11:51 INFO : ... Allocation at complete.
14:11:51 INFO : All aggregates are complete.
14:11:51 INFO : Your resources expire at 2017-06-07T17:53:29 (UTC).
14:11:51 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UCSD/IG-ST-1-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
}}}
Determined login information at each UCSD and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-1 --useSliceAggregates
....
ig-ucsd's geni_status is: ready
User lnevers logs in to ig-ucsd using:
ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.ucsd.edu
ig-gpo's geni_status is: ready
User lnevers logs in to ig-gpo using:
ssh -p 25170 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
}}}
=== Measurements ===
'''Iperf InstaGENI GPO VM to InstaGENI UCSD VM (TCP) - TCP window size: 85.0 KByte (default)'''
''Collected: 2017-06-01''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 557 MBytes 77.9 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 67.2 MBytes 9.40 Mbits/sec
[ 5] 0.0-60.1 sec 97.6 MBytes 13.6 Mbits/sec
[ 4] 0.0-60.1 sec 328 MBytes 45.8 Mbits/sec
[ 7] 0.0-60.1 sec 83.2 MBytes 11.6 Mbits/sec
[ 6] 0.0-60.2 sec 74.4 MBytes 10.4 Mbits/sec
[SUM] 0.0-60.2 sec 650 MBytes 90.7 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 9] 0.0-60.0 sec 57.2 MBytes 8.00 Mbits/sec
[ 8] 0.0-60.1 sec 66.9 MBytes 9.34 Mbits/sec
[ 3] 0.0-60.1 sec 68.0 MBytes 9.49 Mbits/sec
[ 7] 0.0-60.1 sec 66.5 MBytes 9.28 Mbits/sec
[ 11] 0.0-60.1 sec 62.2 MBytes 8.68 Mbits/sec
[ 5] 0.0-60.2 sec 64.9 MBytes 9.04 Mbits/sec
[ 4] 0.0-60.2 sec 54.1 MBytes 7.54 Mbits/sec
[ 6] 0.0-60.2 sec 62.9 MBytes 8.75 Mbits/sec
[ 10] 0.0-60.3 sec 63.8 MBytes 8.86 Mbits/sec
[ 12] 0.0-60.4 sec 49.8 MBytes 6.91 Mbits/sec
[SUM] 0.0-60.4 sec 616 MBytes 85.5 Mbits/sec
}}}
'''Iperf InstaGENI GPO VM to InstaGENI UCSD VM (UDP) - UDP buffer size: 208 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512819 datagrams
[ 3] Server Report:
[ 3] 0.0-60.0 sec 690 MBytes 96.5 Mbits/sec 0.017 ms 20380/512818 (4%)
[ 3] 0.0-60.0 sec 1 datagrams received out-of-order
}}}
'''Ping from InstaGENI GPO VM to the InstaGENI UCSD VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59079ms
rtt min/avg/max/mdev = 74.042/74.324/78.903/0.773 ms
}}}
'''Iperf InstaGENI UCSD VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)'''
''Collected: 2017-06-01''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 588 MBytes 82.2 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-60.1 sec 75.8 MBytes 10.6 Mbits/sec
[ 4] 0.0-60.1 sec 317 MBytes 44.2 Mbits/sec
[ 3] 0.0-60.1 sec 71.1 MBytes 9.92 Mbits/sec
[ 5] 0.0-60.2 sec 98.0 MBytes 13.6 Mbits/sec
[ 7] 0.0-60.4 sec 68.9 MBytes 9.57 Mbits/sec
[SUM] 0.0-60.4 sec 630 MBytes 87.6 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 12] 0.0-60.1 sec 55.8 MBytes 7.79 Mbits/sec
[ 3] 0.0-60.1 sec 59.1 MBytes 8.26 Mbits/sec
[ 8] 0.0-60.1 sec 66.8 MBytes 9.32 Mbits/sec
[ 7] 0.0-60.1 sec 74.0 MBytes 10.3 Mbits/sec
[ 9] 0.0-60.1 sec 55.2 MBytes 7.71 Mbits/sec
[ 11] 0.0-60.1 sec 63.6 MBytes 8.88 Mbits/sec
[ 10] 0.0-60.2 sec 51.2 MBytes 7.14 Mbits/sec
[ 6] 0.0-60.3 sec 68.9 MBytes 9.58 Mbits/sec
[ 4] 0.0-60.3 sec 84.9 MBytes 11.8 Mbits/sec
[ 5] 0.0-60.4 sec 83.2 MBytes 11.6 Mbits/sec
[SUM] 0.0-60.4 sec 663 MBytes 92.1 Mbits/sec
}}}
'''Iperf InstaGENI UCSD VM to GPO InstaGENI VM (UDP) - UDP buffer size: 208 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512806 datagrams
[ 3] Server Report:
[ 3] 0.0-60.7 sec 690 MBytes 95.3 Mbits/sec 0.043 ms 20682/512805 (4%)
[ 3] 0.0-60.7 sec 1 datagrams received out-of-order
}}}
'''Ping from InstaGENI UCSD VM to GPO InstaGENI VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59070ms
rtt min/avg/max/mdev = 73.998/74.157/74.609/0.382 ms
}}}
== IG-ST-2 New Site to GPO IG Loop topology ==
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UCSD/IG-ST-2.rspec IG-ST-2.rspec]:
{{{
$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
14:33:36 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
14:33:36 INFO : Reading slice IG-ST-2 credential...
14:33:36 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2017-06-08 18:33:31 UTC
14:33:36 INFO : Calling SCS...
14:33:37 INFO : Multi-AM reservation will include resources from these aggregates:
14:33:37 INFO :
14:33:37 INFO :
14:33:37 INFO :
14:33:37 INFO : Stitcher doing createsliver at ...
14:33:57 INFO : ... Allocation at complete.
14:33:57 INFO : Stitcher doing createsliver at ...
14:34:16 INFO : ... Allocation at complete.
14:34:16 INFO : Stitcher doing createsliver at ...
14:34:30 INFO : ... Allocation at complete.
14:34:30 INFO : All aggregates are complete.
14:34:30 INFO : Your resources expire at 2017-06-07T18:23:37 (UTC).
14:34:30 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UCSD/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
}}}
Determined login information at each UCSD and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-2 --useSliceAggregates
...
ig-ucsd's geni_status is: ready
User lnevers logs in to ig-ucsd using:
ssh -p 25042 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.ucsd.edu
ig-gpo's geni_status is: ready
User lnevers logs in to ig-gpo using:
ssh -p 25234 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
}}}
Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:
{{{
$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q"
1. Find login Info for hosts in slice IG-ST-2
Key file [/home/lnevers/.ssh/arendia-id_rsa] does NOT exist.
Key file [/home/lnevers/.ssh/sendaria-id_rsa] does NOT exist.
Key file [/home/lnevers/.ssh/lnevers-id_rsa] does NOT exist.
2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.
--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59073ms
rtt min/avg/max/mdev = 73.951/75.454/149.176/9.607 ms
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.
--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59078ms
rtt min/avg/max/mdev = 73.974/75.800/149.210/9.652 ms
... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo
$
}}}
== IG-ST-3 IG-ST-3 New Site 3 node linear topology ==
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UCSD/IG-ST-3.rspec IG-ST-3.rspec]:
{{{
$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
14:48:00 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
14:48:00 INFO : Reading slice IG-ST-3 credential...
14:48:00 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2017-06-08 18:47:53 UTC
14:48:00 INFO : Calling SCS...
14:48:01 INFO : Multi-AM reservation will include resources from these aggregates:
14:48:01 INFO :
14:48:01 INFO :
14:48:01 INFO :
14:48:01 INFO :
14:48:01 INFO : Stitcher doing createsliver at ...
14:48:25 INFO : ... Allocation at complete.
14:48:25 INFO : Stitcher doing createsliver at ...
14:48:42 INFO : ... Allocation at complete.
14:48:42 INFO : Stitcher doing createsliver at ...
14:49:03 INFO : ... Allocation at complete.
14:49:03 INFO : Stitcher doing createsliver at ...
14:49:17 INFO : ... Allocation at complete.
14:49:17 INFO : All aggregates are complete.
14:49:17 INFO : Your resources expire at 2017-06-07T18:38:01 (UTC).
14:49:17 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UCSD/IG-ST-3-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
}}}
Determined login information the UCSD host:
{{{
$ readyToLogin.py IG-ST-3 --useSliceAggregates
...
ig-gpo's geni_status is: ready
User lnevers logs in to ig-gpo using:
ssh -p 25266 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
ig-wash's geni_status is: ready
User lnevers logs in to ig-wash using:
ssh -p 25234 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.washington.edu
ig-ucsd's geni_status is: ready
User lnevers logs in to ig-ucsd using:
ssh -p 25074 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.ucsd.edu
}}}
Login to the UCSD host and ping each remote:
{{{
lnevers@ig-ucsd:~$ #ping GPO IG
lnevers@ig-ucsd:~$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59012ms
rtt min/avg/max/mdev = 73.993/75.392/149.519/9.650 ms
lnevers@ig-ucsd:~$ # UWashington IG
lnevers@ig-ucsd:~$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.
--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59089ms
rtt min/avg/max/mdev = 27.281/27.906/55.988/3.656 ms
lnevers@ig-ucsd:~$
}}}
== IG-ST-4 New Site to GPO EG interoperability ==
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UCSD/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.
{{{
$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o
14:56:49 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
14:56:49 INFO : Reading slice IG-ST-4 credential...
14:56:50 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2017-06-08 18:56:43 UTC
14:56:50 INFO : Calling SCS...
14:56:51 INFO : Multi-AM reservation will include resources from these aggregates:
14:56:51 INFO :
14:56:51 INFO :
14:56:51 INFO :
14:56:51 INFO : Stitcher doing createsliver at ...
14:57:14 INFO : ... Allocation at complete.
14:57:14 INFO : Stitcher doing createsliver at ...
14:57:28 INFO : ... Allocation at complete.
14:57:28 INFO : Stitcher doing createsliver at ...
14:57:37 INFO : ... Allocation at complete.
14:57:37 INFO : All aggregates are complete.
14:57:37 INFO : Your resources expire at 2017-06-07T18:46:51 (UTC).
14:57:37 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UCSD/IG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
}}}
Determined login information at each UCSD and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-4 --useSliceAggregates
....
eg-gpo's geni_status is: ready
User lnevers logs in to eg-gpo using:
ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.5
ig-ucsd's geni_status is: ready
User lnevers logs in to ig-ucsd using:
ssh -p 25138 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.ucsd.edu
}}}
=== Measurements ===
'''Iperf ExoGENI GPO VM to InstaGENI UCSD VM (TCP) - TCP window size: 85.0 KByte (default)'''
''Collected: 2017-06-01''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 137 MBytes 19.1 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 28.2 MBytes 3.95 Mbits/sec
[ 7] 0.0-60.0 sec 29.2 MBytes 4.09 Mbits/sec
[ 5] 0.0-60.1 sec 28.6 MBytes 4.00 Mbits/sec
[ 6] 0.0-60.3 sec 25.1 MBytes 3.50 Mbits/sec
[ 4] 0.0-60.3 sec 28.0 MBytes 3.89 Mbits/sec
[SUM] 0.0-60.3 sec 139 MBytes 19.4 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 12] 0.0-60.2 sec 17.5 MBytes 2.44 Mbits/sec
[ 6] 0.0-60.4 sec 11.1 MBytes 1.55 Mbits/sec
[ 3] 0.0-61.0 sec 12.1 MBytes 1.67 Mbits/sec
[ 4] 0.0-61.0 sec 18.5 MBytes 2.54 Mbits/sec
[ 5] 0.0-61.0 sec 14.1 MBytes 1.94 Mbits/sec
[ 7] 0.0-61.1 sec 15.9 MBytes 2.18 Mbits/sec
[ 10] 0.0-61.3 sec 13.6 MBytes 1.86 Mbits/sec
[ 8] 0.0-61.5 sec 13.5 MBytes 1.84 Mbits/sec
[ 9] 0.0-61.7 sec 13.4 MBytes 1.82 Mbits/sec
[ 11] 0.0-61.8 sec 12.9 MBytes 1.75 Mbits/sec
[SUM] 0.0-61.8 sec 143 MBytes 19.4 Mbits/sec
}}}
'''Iperf ExoGENI GPO VM to InstaGENI UCSD VM (UDP) - UDP buffer size: 208 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512821 datagrams
[ 3] Server Report:
[ 3] 0.0-60.2 sec 140 MBytes 19.4 Mbits/sec 0.030 ms 413254/512816 (81%)
[ 3] 0.0-60.2 sec 1 datagrams received out-of-order
}}}
'''Ping from ExoGENI GPO VM to the InstaGENI UCSD VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59077ms
rtt min/avg/max/mdev = 73.987/74.762/111.763/4.822 ms
}}}
'''Iperf InstaGENI UCSD VM to ExoGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)'''
''Collected: 2017-06-XX''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 128 MBytes 17.8 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-59.4 sec 21.2 MBytes 3.00 Mbits/sec
[ 7] 0.0-59.8 sec 28.9 MBytes 4.05 Mbits/sec
[ 3] 0.0-60.1 sec 33.8 MBytes 4.71 Mbits/sec
[ 6] 0.0-60.1 sec 31.2 MBytes 4.36 Mbits/sec
[ 4] 0.0-60.2 sec 24.2 MBytes 3.38 Mbits/sec
[SUM] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-59.4 sec 16.8 MBytes 2.36 Mbits/sec
[ 11] 0.0-59.5 sec 10.9 MBytes 1.53 Mbits/sec
[ 7] 0.0-59.8 sec 12.9 MBytes 1.81 Mbits/sec
[ 3] 0.0-59.8 sec 15.2 MBytes 2.14 Mbits/sec
[ 6] 0.0-60.1 sec 11.8 MBytes 1.64 Mbits/sec
[ 5] 0.0-60.2 sec 16.9 MBytes 2.35 Mbits/sec
[ 8] 0.0-60.5 sec 15.4 MBytes 2.13 Mbits/sec
[ 9] 0.0-60.6 sec 13.4 MBytes 1.85 Mbits/sec
[ 12] 0.0-60.7 sec 13.0 MBytes 1.80 Mbits/sec
[ 10] 0.0-61.0 sec 13.9 MBytes 1.91 Mbits/sec
[SUM] 0.0-61.0 sec 140 MBytes 19.3 Mbits/sec
}}}
'''Iperf InstaGENI UCSD VM to ExoGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512784 datagrams
[ 3] Server Report:
[ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 14.523 ms 413605/512779 (81%)
[ 3] 0.0-60.2 sec 1 datagrams received out-of-order
}}}
'''Ping from InstaGENI UCSD VM to ExoGENI GPO VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59068ms
rtt min/avg/max/mdev = 73.968/74.157/74.432/0.146 ms
}}}
== IG-ST-5 Site Information ==
Various pages include stitching information for a site. Each of the following were verified for this site:
1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/UCSDInstaGENI#GENINetworkStitching UCSD Aggregate] page.
2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs].
3. ~~Stitching Computation Service logs were reviewed while testing stitching to this site,~~ No longer possible.
4. Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites].
== IG-ST-6 New Site !OpenFlow topology ==
Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UCSD/IG-ST-6.rspec IG-ST-6.rspec]:
{{{
$ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o
14:52:00 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
14:52:00 INFO : Reading slice IG-ST-6 credential...
14:52:00 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2017-06-08 18:50:41 UTC
14:52:00 INFO : Calling SCS...
14:52:01 INFO : Multi-AM reservation will include resources from these aggregates:
14:52:01 INFO :
14:52:01 INFO :
14:52:01 INFO :
14:52:01 INFO : Stitcher doing createsliver at ...
14:52:20 INFO : ... Allocation at complete.
14:52:20 INFO : Stitcher doing createsliver at ...
14:52:42 INFO : ... Allocation at complete.
14:52:42 INFO : Stitcher doing createsliver at ...
14:52:50 INFO : ... Allocation at complete.
14:52:50 INFO : All aggregates are complete.
14:52:50 INFO : Your resources expire at 2017-06-07T18:42:01 (UTC).
14:52:50 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UCSD/IG-ST-6-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-6 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
}}}
Determined login information at each UCSD and NYSERNet aggregate:
{{{
$ readyToLogin.py IG-ST-6 --useSliceAggregates
...
ig-ucsd's geni_status is: ready
User lnevers logs in to ig-ucsd using:
ssh -p 25106 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.ucsd.edu
ig-nyse's geni_status is: ready
User lnevers logs in to ig-nyse using:
ssh -p 25170 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.nysernet.org
}}}
=== Measurements ===
'''Iperf InstaGENI NYSERNet VM to InstaGENI UCSD VM (TCP) - TCP window size: 85.0 KByte (default)'''
''Collected: 2017-06-01''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.1 sec 589 MBytes 82.2 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-60.0 sec 331 MBytes 46.2 Mbits/sec
[ 5] 0.0-60.1 sec 90.8 MBytes 12.7 Mbits/sec
[ 7] 0.0-60.1 sec 72.2 MBytes 10.1 Mbits/sec
[ 4] 0.0-60.2 sec 60.6 MBytes 8.45 Mbits/sec
[ 3] 0.0-60.2 sec 70.5 MBytes 9.82 Mbits/sec
[SUM] 0.0-60.2 sec 625 MBytes 87.0 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 8] 0.0-57.2 sec 78.2 MBytes 11.5 Mbits/sec
[ 9] 0.0-57.3 sec 48.6 MBytes 7.12 Mbits/sec
[ 10] 0.0-57.3 sec 74.1 MBytes 10.9 Mbits/sec
[ 5] 0.0-57.3 sec 62.5 MBytes 9.14 Mbits/sec
[ 7] 0.0-57.4 sec 49.6 MBytes 7.26 Mbits/sec
[ 6] 0.0-57.4 sec 46.9 MBytes 6.85 Mbits/sec
[ 11] 0.0-57.4 sec 62.4 MBytes 9.11 Mbits/sec
[ 3] 0.0-57.8 sec 55.2 MBytes 8.02 Mbits/sec
[ 4] 0.0-57.8 sec 53.1 MBytes 7.71 Mbits/sec
[ 12] 0.0-60.6 sec 116 MBytes 16.1 Mbits/sec
[SUM] 0.0-60.6 sec 647 MBytes 89.6 Mbits/sec
}}}
'''Iperf InstaGENI NYSERNet VM to InstaGENI UCSD VM (UDP) - UDP buffer size: 208 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512797 datagrams
[ 3] Server Report:
[ 3] 0.0-59.9 sec 691 MBytes 96.9 Mbits/sec 0.052 ms 19547/512796 (3.8%)
[ 3] 0.0-59.9 sec 22 datagrams received out-of-order
}}}
'''Ping from InstaGENI NYSERNet VM to InstaGENI UCSD VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59082ms
rtt min/avg/max/mdev = 75.090/77.965/234.390/20.368 ms
}}}
'''Iperf InstaGENI UCSD VM to InstaGENI NYSERNet VM (TCP) - TCP window size: 85.0 KByte (default)'''
''Collected: 2017-06-01''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.1 sec 520 MBytes 72.7 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-59.0 sec 89.6 MBytes 12.8 Mbits/sec
[ 4] 0.0-59.1 sec 374 MBytes 53.2 Mbits/sec
[ 5] 0.0-59.8 sec 96.8 MBytes 13.6 Mbits/sec
[ 6] 0.0-59.9 sec 60.8 MBytes 8.50 Mbits/sec
[ 7] 0.0-60.2 sec 45.8 MBytes 6.37 Mbits/sec
[SUM] 0.0-60.2 sec 667 MBytes 92.9 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-59.7 sec 74.2 MBytes 10.4 Mbits/sec
[ 4] 0.0-59.8 sec 72.1 MBytes 10.1 Mbits/sec
[ 5] 0.0-59.9 sec 62.1 MBytes 8.70 Mbits/sec
[ 7] 0.0-60.0 sec 78.5 MBytes 11.0 Mbits/sec
[ 9] 0.0-60.1 sec 50.2 MBytes 7.02 Mbits/sec
[ 10] 0.0-60.1 sec 71.4 MBytes 9.97 Mbits/sec
[ 6] 0.0-60.2 sec 80.6 MBytes 11.2 Mbits/sec
[ 12] 0.0-60.3 sec 54.5 MBytes 7.59 Mbits/sec
[ 8] 0.0-60.3 sec 59.2 MBytes 8.24 Mbits/sec
[ 11] 0.0-60.4 sec 55.1 MBytes 7.66 Mbits/sec
[SUM] 0.0-60.4 sec 658 MBytes 91.4 Mbits/sec
}}}
'''Iperf InstaGENI UCSD VM to InstaGENI NYSERNet VM (UDP) - UDP buffer size: 208 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512789 datagrams
[ 3] Server Report:
[ 3] 0.0-59.0 sec 680 MBytes 96.7 Mbits/sec 0.032 ms 27951/512788 (5.5%)
[ 3] 0.0-59.0 sec 119 datagrams received out-of-order
}}}
'''Ping from InstaGENI UCSD VM to InstaGENI NYSERNet VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59075ms
rtt min/avg/max/mdev = 75.078/77.510/211.084/17.393 ms
}}}
------
{{{
#!html
Email help@geni.net for GENI support or email me with feedback on this page!
}}}