[[PageOutline]] = Texas A & M University Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == EG-ST-1 New Site to GPO IG topology == The TAMU site advertises the following stitching details for its connection to the AL2S network: {{{ 1000000kbps 1000000kbps urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.houh.net.internet2.edu:e7/1:tamu-eg 10 1000000kbps 1000000kbps l2sc ethernet consumer 940-949 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/TAMU/EG-ST-1-al2s.rspec EG-ST-1-al2s.rspec]: {{{ $ stitcher.py createsliver EG-ST-1 EG-ST-1-al2s.rspec -o 14:37:16 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 14:37:16 INFO : Reading slice EG-ST-1 credential... 14:37:16 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-1 expires on 2014-11-17 19:36:40 UTC 14:37:16 INFO : Using SCS at http://geni.maxgigapop.net:8081/geni/xmlrpc 14:37:16 INFO : Calling SCS... 14:37:21 INFO : Multi-AM reservation will include resources from these aggregates: 14:37:21 INFO : 14:37:21 INFO : 14:37:21 INFO : 14:37:21 INFO : 14:37:21 INFO : Stitcher doing createsliver at ... 14:37:44 INFO : ... Allocation at complete. 14:37:44 INFO : Stitcher doing createsliver at ... 14:38:05 INFO : ... Allocation at complete. 14:38:05 INFO : Stitcher doing createsliver at ... 14:38:19 INFO : ... Allocation at complete. 14:38:19 INFO : Stitcher doing createsliver at ... 14:39:05 INFO : DCN AM : must wait for status ready.... 14:39:05 INFO : Pausing 30 seconds to let circuit become ready... 14:39:43 INFO : DCN circuit 136861 is ready at 14:39:50 INFO : ... Allocation at complete. 14:39:50 INFO : All aggregates are complete. 14:39:50 INFO : Your resources expire at 2014-11-16T19:27:21 (UTC). 14:39:50 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/TAMU/EG-ST-1-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice EG-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each TAMU EG and GPO IG aggregate: {{{ $ readyToLogin.py EG-ST-1 -a tamu-eg .... ================================================================================ LOGIN INFO for AM: https://tamu-hn.exogeni.net:11443/orca/xmlrpc ================================================================================ For more login info, see the section entitled: 'Providing a private key to ssh' in 'readyToLogin.py -h' eg-tamu's geni_status is: ready User lnevers logs in to eg-tamu using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@128.194.6.161 $ readyToLogin.py EG-ST-1 -a gpo-ig .... ig-gpo's geni_status is: changing User lnevers logs in to ig-gpo using: ssh -p 34874 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to ExoGENI TAMU VM (TCP) - TCP window size: 85.3 KByte (default)''' ''Collected: 2014-11-10'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 143 MBytes 20.0 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.5 sec 22.5 MBytes 3.12 Mbits/sec [ 6] 0.0-60.6 sec 30.8 MBytes 4.26 Mbits/sec [ 7] 0.0-60.7 sec 21.8 MBytes 3.01 Mbits/sec [ 4] 0.0-61.0 sec 29.5 MBytes 4.06 Mbits/sec [ 3] 0.0-61.1 sec 40.0 MBytes 5.49 Mbits/sec [SUM] 0.0-61.1 sec 144 MBytes 19.8 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.3 sec 15.5 MBytes 2.16 Mbits/sec [ 6] 0.0-60.6 sec 13.4 MBytes 1.85 Mbits/sec [ 8] 0.0-60.7 sec 15.4 MBytes 2.13 Mbits/sec [ 12] 0.0-60.8 sec 17.9 MBytes 2.47 Mbits/sec [ 11] 0.0-60.8 sec 12.5 MBytes 1.72 Mbits/sec [ 10] 0.0-61.0 sec 13.4 MBytes 1.84 Mbits/sec [ 3] 0.0-61.0 sec 16.8 MBytes 2.30 Mbits/sec [ 7] 0.0-61.0 sec 11.9 MBytes 1.63 Mbits/sec [ 4] 0.0-61.8 sec 18.4 MBytes 2.50 Mbits/sec [ 9] 0.0-63.1 sec 11.9 MBytes 1.58 Mbits/sec [SUM] 0.0-63.1 sec 147 MBytes 19.5 Mbits/sec }}} '''Iperf InstaGENI GPO VM to ExoGENI TAMU VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512807 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 14.530 ms 413436/512802 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the ExoGENI TAMU VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59059ms rtt min/avg/max/mdev = 49.749/49.957/50.156/0.126 ms }}} '''Iperf ExoGENI TAMU VM to GPO InstaGENI VM (TCP) - TCP window size: 85.3 KByte (default)''' ''Collected: 2014-11-10'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 140 MBytes 19.6 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 30.1 MBytes 4.21 Mbits/sec [ 5] 0.0-60.1 sec 26.4 MBytes 3.68 Mbits/sec [ 7] 0.0-60.4 sec 32.6 MBytes 4.53 Mbits/sec [ 6] 0.0-60.4 sec 28.1 MBytes 3.90 Mbits/sec [ 4] 0.0-60.7 sec 25.0 MBytes 3.46 Mbits/sec [SUM] 0.0-60.7 sec 142 MBytes 19.7 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-59.1 sec 12.9 MBytes 1.83 Mbits/sec [ 10] 0.0-59.3 sec 14.1 MBytes 2.00 Mbits/sec [ 8] 0.0-59.4 sec 13.5 MBytes 1.91 Mbits/sec [ 6] 0.0-59.5 sec 15.0 MBytes 2.12 Mbits/sec [ 4] 0.0-59.6 sec 14.6 MBytes 2.06 Mbits/sec [ 3] 0.0-59.9 sec 14.5 MBytes 2.03 Mbits/sec [ 7] 0.0-60.2 sec 13.6 MBytes 1.90 Mbits/sec [ 9] 0.0-60.4 sec 16.1 MBytes 2.24 Mbits/sec [ 11] 0.0-60.6 sec 15.4 MBytes 2.13 Mbits/sec [ 5] 0.0-60.9 sec 12.5 MBytes 1.72 Mbits/sec [SUM] 0.0-60.9 sec 142 MBytes 19.6 Mbits/sec }}} '''Iperf ExoGENI TAMU VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.4 sec 140 MBytes 19.5 Mbits/sec 0.173 ms 412783/512820 (80%) [ 3] 0.0-60.4 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI TAMU VM to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59027ms rtt min/avg/max/mdev = 49.702/49.977/50.414/0.218 ms }}} == EG-ST-2 New Site to GPO IG Loop topology == ''' Note: this test is currently blocked by ExoGENI restriction which only allows one GENI stitched link per site [http://groups.geni.net/geni/ticket/1156 exoticket:1156]. ''' Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/TAMU/EG-ST-2.rspec EG-ST-2.rspec]: {{{ $ stitcher.py createsliver EG-ST-2 EG-ST-2.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc $ stitcher.py createsliver EG-ST-2 EG-ST-2.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:37:55 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 13:37:55 INFO : Reading slice EG-ST-2 credential... 13:37:56 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-2 expires on 2017-05-29 14:19:51 UTC 13:37:56 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:37:56 INFO : Calling SCS... 13:37:57 INFO : Multi-AM reservation will include resources from these aggregates: 13:37:57 INFO : 13:37:57 INFO : 13:37:57 INFO : 13:37:57 INFO : Stitcher doing createsliver at ... 13:38:14 INFO : ... Allocation at complete. 13:38:14 INFO : Stitcher doing createsliver at ... 13:38:26 INFO : ... Allocation at complete. 13:38:26 INFO : Stitcher doing createsliver at ... 13:38:41 INFO : ... Allocation at complete. 13:38:41 INFO : All aggregates are complete. 13:38:41 INFO : Your resources expire at 2017-05-28T17:27:57 (UTC). 13:38:41 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/TAMU/EG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice EG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each TAMU and GPO aggregate: {{{ $ readyToLogin.py EG-ST-2 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 25106 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com eg-tamu's geni_status is: ready User lnevers logs in to eg-tamu using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@128.194.6.159 }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ lnevers@ig-gpo:~$ ping 10.10.4.2 -c 60 -q; ping 192.168.4.2 -c 60 -q PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59075ms rtt min/avg/max/mdev = 58.933/60.231/119.548/7.735 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59068ms rtt min/avg/max/mdev = 58.961/60.095/119.216/7.700 ms }}} == EG-ST-3 EG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/TAMU/EG-ST-3.rspec EG-ST-3.rspec]: {{{ $ stitcher.py createsliver EG-ST-3 EG-ST-3.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:41:42 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 13:41:43 INFO : Reading slice EG-ST-3 credential... 13:41:43 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-3 expires on 2017-05-29 14:38:34 UTC 13:41:43 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 13:41:43 INFO : Calling SCS... 13:41:44 INFO : Multi-AM reservation will include resources from these aggregates: 13:41:44 INFO : 13:41:44 INFO : 13:41:44 INFO : 13:41:44 INFO : 13:41:44 INFO : Stitcher doing createsliver at ... 13:42:01 INFO : ... Allocation at complete. 13:42:01 INFO : Stitcher doing createsliver at ... 13:42:18 INFO : ... Allocation at complete. 13:42:18 INFO : Stitcher doing createsliver at ... 13:42:29 INFO : ... Allocation at complete. 13:42:29 INFO : Stitcher doing createsliver at ... 13:42:31 ERROR : {'output': 'Exception: requested VLAN unavailable: rtsw.atla.net.internet2.edu,et-4/3/0.0 VLAN=3541', 'code': {'geni_code': 24}} 13:42:31 INFO : Deleting some reservations to retry, avoiding failed VLAN... 13:42:31 INFO : Doing deletesliver at ... 13:44:07 INFO : Will put back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at .... 13:44:07 INFO : Pausing for 30 seconds for Aggregates to free up resources... 13:44:37 INFO : Checking that prior reservation at has been cleared up.... 13:44:49 ERROR : {'output': 'No slice or aggregate here', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.sox.net+log+fcdffcdf1ff1d729e2257e9a68605fd8', 'am_type': 'protogeni', 'geni_code': 12, 'am_code': 12, 'protogeni_error_url': 'https://www.instageni.sox.net/spewlogfile.php3?logfile=fcdffcdf1ff1d729e2257e9a68605fd8'}, 'value': 0} 13:44:49 INFO : ... it is, so can try a new reservation. 13:44:49 INFO : Stitcher doing createsliver at ... 13:45:20 INFO : ... Allocation at complete. 13:45:20 INFO : Stitcher doing createsliver at ... 13:45:33 INFO : ... Allocation at complete. 13:45:33 INFO : All aggregates are complete. 13:45:33 INFO : Your resources expire at 2017-05-28T17:31:44 (UTC). 13:45:33 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/TAMU/EG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice EG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the TAMU host: {{{ $ readyToLogin.py EG-ST-3 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 25138 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com eg-tamu's geni_status is: ready User lnevers logs in to eg-tamu using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@128.194.6.160 ig-sox's geni_status is: ready User lnevers logs in to ig-sox using: ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.sox.net }}} Login to the TAMU host and ping each remote: {{{ lnevers@eg-tamu:~$ #ping GPO IG lnevers@eg-tamu:~$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59068ms rtt min/avg/max/mdev = 58.996/60.154/119.166/7.687 ms lnevers@eg-tamu:~$ # Utah IG lnevers@eg-tamu:~$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59065ms rtt min/avg/max/mdev = 35.954/36.663/73.208/4.760 ms lnevers@eg-tamu:~$ }}} == EG-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/TAMU/EG-ST-4.rspec EG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG. {{{ $ stitcher.py createsliver EG-ST-4 EG-ST-4.rspec -o 11:07:28 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 11:07:29 INFO : Reading slice EG-ST-4 credential... 11:07:29 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4 expires on 2014-11-19 16:07:19 UTC 11:07:29 INFO : Using SCS at http://geni.maxgigapop.net:8081/geni/xmlrpc 11:07:29 INFO : Calling SCS... 11:07:31 INFO : Multi-AM reservation will include resources from these aggregates: 11:07:31 INFO : 11:07:31 INFO : 11:07:31 INFO : 11:07:31 INFO : 11:07:31 INFO : Stitcher doing createsliver at ... 11:07:49 INFO : ... Allocation at complete. 11:07:49 INFO : Stitcher doing createsliver at ... 11:09:08 INFO : ... Allocation at complete. 11:09:08 INFO : Stitcher doing createsliver at ... 11:09:14 INFO : ... Allocation at complete. 11:09:14 INFO : Stitcher doing createsliver at ... 11:10:00 INFO : DCN AM : must wait for status ready.... 11:10:00 INFO : Pausing 30 seconds to let circuit become ready... 11:10:37 INFO : DCN circuit 137491 is ready at 11:10:45 INFO : ... Allocation at complete. 11:10:45 INFO : All aggregates are complete. 11:10:45 INFO : Your resources expire at 2014-11-18T15:57:31 (UTC). 11:10:45 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/TAMU/EG-ST-4-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice EG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each TAMU and GPO aggregate: {{{ $ readyToLogin.py EG-ST-4 -a eg-sm .... eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.31 eg-tamu's geni_status is: ready User lnevers logs in to eg-tamu using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@128.194.6.139 }}} === Measurements === '''Iperf ExoGENI GPO VM to ExoGENI TAMU VM (TCP) - TCP window size: 85.3 KByte (default)''' ''Collected: 2014-11-11'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 138 MBytes 19.3 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.1 sec 28.8 MBytes 4.01 Mbits/sec [ 4] 0.0-60.3 sec 30.1 MBytes 4.19 Mbits/sec [ 5] 0.0-60.4 sec 23.2 MBytes 3.23 Mbits/sec [ 6] 0.0-60.5 sec 24.9 MBytes 3.45 Mbits/sec [ 3] 0.0-60.8 sec 31.1 MBytes 4.29 Mbits/sec [SUM] 0.0-60.8 sec 138 MBytes 19.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.5 sec 16.2 MBytes 2.25 Mbits/sec [ 5] 0.0-60.5 sec 14.4 MBytes 1.99 Mbits/sec [ 9] 0.0-60.5 sec 15.2 MBytes 2.11 Mbits/sec [ 10] 0.0-60.6 sec 16.9 MBytes 2.34 Mbits/sec [ 7] 0.0-60.8 sec 11.0 MBytes 1.52 Mbits/sec [ 4] 0.0-61.0 sec 12.2 MBytes 1.68 Mbits/sec [ 8] 0.0-61.2 sec 14.9 MBytes 2.04 Mbits/sec [ 6] 0.0-61.3 sec 12.8 MBytes 1.74 Mbits/sec [ 11] 0.0-61.4 sec 11.9 MBytes 1.62 Mbits/sec [ 3] 0.0-61.5 sec 15.8 MBytes 2.15 Mbits/sec [SUM] 0.0-61.5 sec 141 MBytes 19.3 Mbits/sec }}} '''Iperf ExoGENI GPO VM to ExoGENI TAMU VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512770 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 141 MBytes 19.6 Mbits/sec 15.813 ms 412216/512768 (80%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI GPO VM to the ExoGENI TAMU VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59090ms rtt min/avg/max/mdev = 48.493/48.966/49.277/0.248 ms }}} '''Iperf ExoGENI TAMU VM to ExoGENI GPO VM (TCP) - TCP window size: 85.3 KByte (default)''' ''Collected: 2014-11-11'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 135 MBytes 18.8 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.2 sec 26.2 MBytes 3.66 Mbits/sec [ 4] 0.0-60.2 sec 29.8 MBytes 4.14 Mbits/sec [ 5] 0.0-60.4 sec 29.4 MBytes 4.08 Mbits/sec [ 3] 0.0-60.7 sec 27.8 MBytes 3.83 Mbits/sec [ 6] 0.0-60.8 sec 25.8 MBytes 3.55 Mbits/sec [SUM] 0.0-60.8 sec 139 MBytes 19.1 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.3 sec 13.0 MBytes 1.81 Mbits/sec [ 5] 0.0-60.6 sec 15.1 MBytes 2.09 Mbits/sec [ 4] 0.0-60.6 sec 14.6 MBytes 2.02 Mbits/sec [ 6] 0.0-60.7 sec 14.9 MBytes 2.06 Mbits/sec [ 3] 0.0-60.7 sec 14.5 MBytes 2.00 Mbits/sec [ 9] 0.0-60.7 sec 15.0 MBytes 2.07 Mbits/sec [ 7] 0.0-60.8 sec 12.5 MBytes 1.72 Mbits/sec [ 10] 0.0-61.0 sec 12.8 MBytes 1.75 Mbits/sec [ 11] 0.0-61.5 sec 12.9 MBytes 1.76 Mbits/sec [ 8] 0.0-61.6 sec 15.9 MBytes 2.16 Mbits/sec [SUM] 0.0-61.6 sec 141 MBytes 19.2 Mbits/sec }}} '''Iperf ExoGENI TAMU VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.3 sec 141 MBytes 19.6 Mbits/sec 15.772 ms 412157/512817 (80%) [ 3] 0.0-60.3 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI TAMU VM to ExoGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59086ms rtt min/avg/max/mdev = 48.654/49.071/49.386/0.202 ms }}} == EG-ST-5 Site Information == Various pages include stitching information for a site. Each of the following were verified for this site: 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/TexasAMUniversityExoGENI#GENINetworkStitching TAMU Aggregate] page. 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs]. 3. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found. 4. To be added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. == EG-ST-6 New Site !OpenFlow topology == ''' Note: Test case on hold, waiting for reply from Ilya about support for this feature. Also waiting on syntax definition. ''' Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/TAMU/EG-ST-6.rspec EG-ST-6.rspec]: {{{ omni.py createslice EG-ST-6 stitcher.py createsliver EG-ST-6 EG-ST-6.rspec -o }}} Determined login information at each TAMU and GPO aggregate: {{{ $ readyToLogin.py EG-ST-6 -a tamu-ig .... $ readyToLogin.py EG-ST-6 -a gpo-ig .... }}} === Measurements === '''Iperf InstaGENI GPO VM to ExoGENI TAMU VM (TCP) - TCP window size: 85.3 KByte (default)''' ''Collected: 2014-xx-xx'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf InstaGENI GPO VM to ExoGENI TAMU VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from InstaGENI GPO VM to ExoGENI TAMU VM ''' {{{ }}} '''Iperf ExoGENI TAMU VM to InstaGENI GPO VM (TCP) - TCP window size: 85.3 KByte (default)''' ''Collected: 2014-xx-xx'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf ExoGENI TAMU VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from ExoGENI TAMU VM to InstaGENI GPO VM ''' {{{ }}} ----- {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}