wiki:GeniNetworkStitchingConfirmationTestStatus/TAMU

Version 12 (modified by lnevers@bbn.com, 7 years ago) (diff)

--

Texas A & M University Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

EG-ST-1 New Site to GPO IG topology

The TAMU site advertises the following stitching details for its connection to the AL2S network:

<ns2:port id="urn:publicid:IDN+exogeni.net:tamuNet+stitchport+tamuNet:IBM:G8264:TenGigabitEthernet:1:1:ethernet">
<ns2:capacity>1000000kbps</ns2:capacity>
<ns2:maximumReservableCapacity>1000000kbps</ns2:maximumReservableCapacity>
<ns2:link id="urn:publicid:IDN+exogeni.net:tamuNet+interface+tamuNet:IBM:G8264:TenGigabitEthernet:1:1:ethernet">
<ns2:remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.houh.net.internet2.edu:e7/1:tamu-eg</ns2:remoteLinkId>
<ns2:trafficEngineeringMetric>10</ns2:trafficEngineeringMetric>
<ns2:capacity>1000000kbps</ns2:capacity>
<ns2:maximumReservableCapacity>1000000kbps</ns2:maximumReservableCapacity>
<ns2:switchingCapabilityDescriptor>
<ns2:switchingcapType>l2sc</ns2:switchingcapType>
<ns2:encodingType>ethernet</ns2:encodingType>
<ns2:switchingCapabilitySpecificInfo>
<ns2:switchingCapabilitySpecificInfo_L2sc>
<ns2:capability>consumer</ns2:capability>
<ns2:vlanRangeAvailability>940-949</ns2:vlanRangeAvailability>
<ns2:vlanTranslation>false</ns2:vlanTranslation>
</ns2:switchingCapabilitySpecificInfo_L2sc></ns2:switchingCapabilitySpecificInfo></ns2:switchingCapabilityDescriptor></ns2:link></ns2:port>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec EG-ST-1-al2s.rspec:

$ stitcher.py createsliver EG-ST-1 EG-ST-1-al2s.rspec -o
14:37:16 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
14:37:16 INFO    : Reading slice EG-ST-1 credential...
14:37:16 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-1 expires on 2014-11-17 19:36:40 UTC
14:37:16 INFO    : Using SCS at http://geni.maxgigapop.net:8081/geni/xmlrpc
14:37:16 INFO    : Calling SCS...
14:37:21 INFO    : Multi-AM reservation will include resources from these aggregates:
14:37:21 INFO    : 	<Aggregate gpo-ig>
14:37:21 INFO    : 	<Aggregate tamu-eg>
14:37:21 INFO    : 	<Aggregate oess>
14:37:21 INFO    : 	<Aggregate ion>
14:37:21 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
14:37:44 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
14:37:44 INFO    : Stitcher doing createsliver at <Aggregate tamu-eg>...
14:38:05 INFO    : ... Allocation at <Aggregate tamu-eg> complete.
14:38:05 INFO    : Stitcher doing createsliver at <Aggregate oess>...
14:38:19 INFO    : ... Allocation at <Aggregate oess> complete.
14:38:19 INFO    : Stitcher doing createsliver at <Aggregate ion>...
14:39:05 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
14:39:05 INFO    : Pausing 30 seconds to let circuit become ready...
14:39:43 INFO    : DCN circuit 136861 is ready at <Aggregate ion>
14:39:50 INFO    : ... Allocation at <Aggregate ion> complete.
14:39:50 INFO    : All aggregates are complete.
14:39:50 INFO    : Your resources expire at 2014-11-16T19:27:21 (UTC). 
14:39:50 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/TAMU/EG-ST-1-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice EG-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each TAMU EG and GPO IG aggregate:

$ readyToLogin.py EG-ST-1 -a tamu-eg
  ....
================================================================================
LOGIN INFO for AM: https://tamu-hn.exogeni.net:11443/orca/xmlrpc
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

eg-tamu's geni_status is: ready 
User lnevers logs in to eg-tamu using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@128.194.6.161

$ readyToLogin.py EG-ST-1 -a gpo-ig
  ....
ig-gpo's geni_status is: changing 
User lnevers logs in to ig-gpo using:
	ssh -p 34874  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to ExoGENI TAMU VM (TCP) - TCP window size: 85.3 KByte (default)

Collected: 2014-11-10

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   143 MBytes  20.0 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.5 sec  22.5 MBytes  3.12 Mbits/sec
[  6]  0.0-60.6 sec  30.8 MBytes  4.26 Mbits/sec
[  7]  0.0-60.7 sec  21.8 MBytes  3.01 Mbits/sec
[  4]  0.0-61.0 sec  29.5 MBytes  4.06 Mbits/sec
[  3]  0.0-61.1 sec  40.0 MBytes  5.49 Mbits/sec
[SUM]  0.0-61.1 sec   144 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.3 sec  15.5 MBytes  2.16 Mbits/sec
[  6]  0.0-60.6 sec  13.4 MBytes  1.85 Mbits/sec
[  8]  0.0-60.7 sec  15.4 MBytes  2.13 Mbits/sec
[ 12]  0.0-60.8 sec  17.9 MBytes  2.47 Mbits/sec
[ 11]  0.0-60.8 sec  12.5 MBytes  1.72 Mbits/sec
[ 10]  0.0-61.0 sec  13.4 MBytes  1.84 Mbits/sec
[  3]  0.0-61.0 sec  16.8 MBytes  2.30 Mbits/sec
[  7]  0.0-61.0 sec  11.9 MBytes  1.63 Mbits/sec
[  4]  0.0-61.8 sec  18.4 MBytes  2.50 Mbits/sec
[  9]  0.0-63.1 sec  11.9 MBytes  1.58 Mbits/sec
[SUM]  0.0-63.1 sec   147 MBytes  19.5 Mbits/sec

Iperf InstaGENI GPO VM to ExoGENI TAMU VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512807 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  14.530 ms 413436/512802 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the ExoGENI TAMU VM

60 packets transmitted, 60 received, 0% packet loss, time 59059ms
rtt min/avg/max/mdev = 49.749/49.957/50.156/0.126 ms

Iperf ExoGENI TAMU VM to GPO InstaGENI VM (TCP) - TCP window size: 85.3 KByte (default)

Collected: 2014-11-10

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   140 MBytes  19.6 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  30.1 MBytes  4.21 Mbits/sec
[  5]  0.0-60.1 sec  26.4 MBytes  3.68 Mbits/sec
[  7]  0.0-60.4 sec  32.6 MBytes  4.53 Mbits/sec
[  6]  0.0-60.4 sec  28.1 MBytes  3.90 Mbits/sec
[  4]  0.0-60.7 sec  25.0 MBytes  3.46 Mbits/sec
[SUM]  0.0-60.7 sec   142 MBytes  19.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 12]  0.0-59.1 sec  12.9 MBytes  1.83 Mbits/sec
[ 10]  0.0-59.3 sec  14.1 MBytes  2.00 Mbits/sec
[  8]  0.0-59.4 sec  13.5 MBytes  1.91 Mbits/sec
[  6]  0.0-59.5 sec  15.0 MBytes  2.12 Mbits/sec
[  4]  0.0-59.6 sec  14.6 MBytes  2.06 Mbits/sec
[  3]  0.0-59.9 sec  14.5 MBytes  2.03 Mbits/sec
[  7]  0.0-60.2 sec  13.6 MBytes  1.90 Mbits/sec
[  9]  0.0-60.4 sec  16.1 MBytes  2.24 Mbits/sec
[ 11]  0.0-60.6 sec  15.4 MBytes  2.13 Mbits/sec
[  5]  0.0-60.9 sec  12.5 MBytes  1.72 Mbits/sec
[SUM]  0.0-60.9 sec   142 MBytes  19.6 Mbits/sec

Iperf ExoGENI TAMU VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.4 sec   140 MBytes  19.5 Mbits/sec   0.173 ms 412783/512820 (80%)
[  3]  0.0-60.4 sec  1 datagrams received out-of-order

Ping from ExoGENI TAMU VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59027ms
rtt min/avg/max/mdev = 49.702/49.977/50.414/0.218 ms

EG-ST-2 New Site to GPO IG Loop topology

Note: this test is currently blocked by ExoGENI restriction which only allows one GENI stitched link per site exoticket:1156.

Create a slice and then create the stitched slivers with the RSpec EG-ST-2.rspec:

$ stitcher.py createsliver EG-ST-2 EG-ST-2.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc
$ stitcher.py createsliver EG-ST-2 EG-ST-2.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc
13:37:55 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
13:37:55 INFO    : Reading slice EG-ST-2 credential...
13:37:56 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-2 expires on 2017-05-29 14:19:51 UTC
13:37:56 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
13:37:56 INFO    : Calling SCS...
13:37:57 INFO    : Multi-AM reservation will include resources from these aggregates:
13:37:57 INFO    : 	<Aggregate gpo-ig>
13:37:57 INFO    : 	<Aggregate tamu-eg>
13:37:57 INFO    : 	<Aggregate al2s>
13:37:57 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:38:14 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:38:14 INFO    : Stitcher doing createsliver at <Aggregate tamu-eg>...
13:38:26 INFO    : ... Allocation at <Aggregate tamu-eg> complete.
13:38:26 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:38:41 INFO    : ... Allocation at <Aggregate al2s> complete.
13:38:41 INFO    : All aggregates are complete.
13:38:41 INFO    : Your resources expire at 2017-05-28T17:27:57 (UTC). 
13:38:41 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/TAMU/EG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice EG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each TAMU and GPO aggregate:

$ readyToLogin.py EG-ST-2 --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 25106  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com

eg-tamu's geni_status is: ready 
User lnevers logs in to eg-tamu using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@128.194.6.159

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

lnevers@ig-gpo:~$ ping 10.10.4.2 -c 60 -q; ping 192.168.4.2 -c 60 -q
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59075ms
rtt min/avg/max/mdev = 58.933/60.231/119.548/7.735 ms
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59068ms
rtt min/avg/max/mdev = 58.961/60.095/119.216/7.700 ms

EG-ST-3 EG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSpec EG-ST-3.rspec:

$ stitcher.py createsliver EG-ST-3 EG-ST-3.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc
13:41:42 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
13:41:43 INFO    : Reading slice EG-ST-3 credential...
13:41:43 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-3 expires on 2017-05-29 14:38:34 UTC
13:41:43 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
13:41:43 INFO    : Calling SCS...
13:41:44 INFO    : Multi-AM reservation will include resources from these aggregates:
13:41:44 INFO    : 	<Aggregate sox-ig>
13:41:44 INFO    : 	<Aggregate gpo-ig>
13:41:44 INFO    : 	<Aggregate tamu-eg>
13:41:44 INFO    : 	<Aggregate al2s>
13:41:44 INFO    : Stitcher doing createsliver at <Aggregate sox-ig>...
13:42:01 INFO    : ... Allocation at <Aggregate sox-ig> complete.
13:42:01 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:42:18 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:42:18 INFO    : Stitcher doing createsliver at <Aggregate tamu-eg>...
13:42:29 INFO    : ... Allocation at <Aggregate tamu-eg> complete.
13:42:29 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:42:31 ERROR   :  {'output': 'Exception: requested VLAN unavailable: rtsw.atla.net.internet2.edu,et-4/3/0.0 VLAN=3541', 'code': {'geni_code': 24}}
13:42:31 INFO    : Deleting some reservations to retry, avoiding failed VLAN...
13:42:31 INFO    : Doing deletesliver at <Aggregate sox-ig>...
13:44:07 INFO    : Will put <Aggregate al2s> back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at <Aggregate al2s>....
13:44:07 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


13:44:37 INFO    : Checking that prior reservation at <Aggregate sox-ig> has been cleared up....
13:44:49 ERROR   :  {'output': 'No slice or aggregate here', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.sox.net+log+fcdffcdf1ff1d729e2257e9a68605fd8', 'am_type': 'protogeni', 'geni_code': 12, 'am_code': 12, 'protogeni_error_url': 'https://www.instageni.sox.net/spewlogfile.php3?logfile=fcdffcdf1ff1d729e2257e9a68605fd8'}, 'value': 0}
13:44:49 INFO    : ... it is, so can try a new reservation.
13:44:49 INFO    : Stitcher doing createsliver at <Aggregate sox-ig>...
13:45:20 INFO    : ... Allocation at <Aggregate sox-ig> complete.
13:45:20 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:45:33 INFO    : ... Allocation at <Aggregate al2s> complete.
13:45:33 INFO    : All aggregates are complete.
13:45:33 INFO    : Your resources expire at 2017-05-28T17:31:44 (UTC). 
13:45:33 INFO    : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/TAMU/EG-ST-3-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice EG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the TAMU host:

$ readyToLogin.py EG-ST-3 --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 25138  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com

eg-tamu's geni_status is: ready 
User lnevers logs in to eg-tamu using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@128.194.6.160


ig-sox's geni_status is: ready 
User lnevers logs in to ig-sox using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.sox.net

Login to the TAMU host and ping each remote:

lnevers@eg-tamu:~$ #ping GPO IG 
lnevers@eg-tamu:~$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59068ms
rtt min/avg/max/mdev = 58.996/60.154/119.166/7.687 ms
lnevers@eg-tamu:~$ # Utah IG
lnevers@eg-tamu:~$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59065ms
rtt min/avg/max/mdev = 35.954/36.663/73.208/4.760 ms
lnevers@eg-tamu:~$ 

EG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSpec EG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

$ stitcher.py createsliver EG-ST-4 EG-ST-4.rspec -o 
11:07:28 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
11:07:29 INFO    : Reading slice EG-ST-4 credential...
11:07:29 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4 expires on 2014-11-19 16:07:19 UTC
11:07:29 INFO    : Using SCS at http://geni.maxgigapop.net:8081/geni/xmlrpc
11:07:29 INFO    : Calling SCS...
11:07:31 INFO    : Multi-AM reservation will include resources from these aggregates:
11:07:31 INFO    : 	<Aggregate gpo-ig>
11:07:31 INFO    : 	<Aggregate oess>
11:07:31 INFO    : 	<Aggregate ion>
11:07:31 INFO    : 	<Aggregate eg-sm>
11:07:31 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:07:49 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:07:49 INFO    : Stitcher doing createsliver at <Aggregate eg-sm>...
11:09:08 INFO    : ... Allocation at <Aggregate eg-sm> complete.
11:09:08 INFO    : Stitcher doing createsliver at <Aggregate oess>...
11:09:14 INFO    : ... Allocation at <Aggregate oess> complete.
11:09:14 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:10:00 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:10:00 INFO    : Pausing 30 seconds to let circuit become ready...
11:10:37 INFO    : DCN circuit 137491 is ready at <Aggregate ion>
11:10:45 INFO    : ... Allocation at <Aggregate ion> complete.
11:10:45 INFO    : All aggregates are complete.
11:10:45 INFO    : Your resources expire at 2014-11-18T15:57:31 (UTC). 
11:10:45 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/TAMU/EG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice EG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each TAMU and GPO aggregate:

$ readyToLogin.py EG-ST-4 -a eg-sm
  ....
eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.31

eg-tamu's geni_status is: ready 
User lnevers logs in to eg-tamu using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@128.194.6.139

Measurements

Iperf ExoGENI GPO VM to ExoGENI TAMU VM (TCP) - TCP window size: 85.3 KByte (default)

Collected: 2014-11-11

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.2 sec   138 MBytes  19.3 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.1 sec  28.8 MBytes  4.01 Mbits/sec
[  4]  0.0-60.3 sec  30.1 MBytes  4.19 Mbits/sec
[  5]  0.0-60.4 sec  23.2 MBytes  3.23 Mbits/sec
[  6]  0.0-60.5 sec  24.9 MBytes  3.45 Mbits/sec
[  3]  0.0-60.8 sec  31.1 MBytes  4.29 Mbits/sec
[SUM]  0.0-60.8 sec   138 MBytes  19.0 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 12]  0.0-60.5 sec  16.2 MBytes  2.25 Mbits/sec
[  5]  0.0-60.5 sec  14.4 MBytes  1.99 Mbits/sec
[  9]  0.0-60.5 sec  15.2 MBytes  2.11 Mbits/sec
[ 10]  0.0-60.6 sec  16.9 MBytes  2.34 Mbits/sec
[  7]  0.0-60.8 sec  11.0 MBytes  1.52 Mbits/sec
[  4]  0.0-61.0 sec  12.2 MBytes  1.68 Mbits/sec
[  8]  0.0-61.2 sec  14.9 MBytes  2.04 Mbits/sec
[  6]  0.0-61.3 sec  12.8 MBytes  1.74 Mbits/sec
[ 11]  0.0-61.4 sec  11.9 MBytes  1.62 Mbits/sec
[  3]  0.0-61.5 sec  15.8 MBytes  2.15 Mbits/sec
[SUM]  0.0-61.5 sec   141 MBytes  19.3 Mbits/sec

Iperf ExoGENI GPO VM to ExoGENI TAMU VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512770 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   141 MBytes  19.6 Mbits/sec  15.813 ms 412216/512768 (80%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from ExoGENI GPO VM to the ExoGENI TAMU VM

60 packets transmitted, 60 received, 0% packet loss, time 59090ms
rtt min/avg/max/mdev = 48.493/48.966/49.277/0.248 ms

Iperf ExoGENI TAMU VM to ExoGENI GPO VM (TCP) - TCP window size: 85.3 KByte (default)

Collected: 2014-11-11

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.2 sec   135 MBytes  18.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.2 sec  26.2 MBytes  3.66 Mbits/sec
[  4]  0.0-60.2 sec  29.8 MBytes  4.14 Mbits/sec
[  5]  0.0-60.4 sec  29.4 MBytes  4.08 Mbits/sec
[  3]  0.0-60.7 sec  27.8 MBytes  3.83 Mbits/sec
[  6]  0.0-60.8 sec  25.8 MBytes  3.55 Mbits/sec
[SUM]  0.0-60.8 sec   139 MBytes  19.1 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 12]  0.0-60.3 sec  13.0 MBytes  1.81 Mbits/sec
[  5]  0.0-60.6 sec  15.1 MBytes  2.09 Mbits/sec
[  4]  0.0-60.6 sec  14.6 MBytes  2.02 Mbits/sec
[  6]  0.0-60.7 sec  14.9 MBytes  2.06 Mbits/sec
[  3]  0.0-60.7 sec  14.5 MBytes  2.00 Mbits/sec
[  9]  0.0-60.7 sec  15.0 MBytes  2.07 Mbits/sec
[  7]  0.0-60.8 sec  12.5 MBytes  1.72 Mbits/sec
[ 10]  0.0-61.0 sec  12.8 MBytes  1.75 Mbits/sec
[ 11]  0.0-61.5 sec  12.9 MBytes  1.76 Mbits/sec
[  8]  0.0-61.6 sec  15.9 MBytes  2.16 Mbits/sec
[SUM]  0.0-61.6 sec   141 MBytes  19.2 Mbits/sec

Iperf ExoGENI TAMU VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.3 sec   141 MBytes  19.6 Mbits/sec  15.772 ms 412157/512817 (80%)
[  3]  0.0-60.3 sec  1 datagrams received out-of-order

Ping from ExoGENI TAMU VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59086ms
rtt min/avg/max/mdev = 48.654/49.071/49.386/0.202 ms

EG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the TAMU Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. To be added site to the list of GENI Network Stitching Sites.

EG-ST-6 New Site OpenFlow topology

Note: Test case on hold, waiting for reply from Ilya about support for this feature. Also waiting on syntax definition.

Create a slice and then create the stitched slivers using OpenFlow with the RSPec EG-ST-6.rspec:

omni.py createslice EG-ST-6
stitcher.py createsliver EG-ST-6 EG-ST-6.rspec -o

Determined login information at each TAMU and GPO aggregate:

$ readyToLogin.py EG-ST-6 -a tamu-ig
  ....

$ readyToLogin.py EG-ST-6 -a gpo-ig
  ....

Measurements

Iperf InstaGENI GPO VM to ExoGENI TAMU VM (TCP) - TCP window size: 85.3 KByte (default)

Collected: 2014-xx-xx

One Client_

Five Clients

Ten Clients

Iperf InstaGENI GPO VM to ExoGENI TAMU VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI GPO VM to ExoGENI TAMU VM

Iperf ExoGENI TAMU VM to InstaGENI GPO VM (TCP) - TCP window size: 85.3 KByte (default)

Collected: 2014-xx-xx

One Client_

Five Clients

Ten Clients

Iperf ExoGENI TAMU VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from ExoGENI TAMU VM to InstaGENI GPO VM


Email help@geni.net for GENI support or email me with feedback on this page!