wiki:GeniNetworkStitchingConfirmationTestStatus/SOX

SoX Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The SOX site advertises the following stitching details:

<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2015-03-11T15:29:46Z" >
<aggregate id="urn:publicid:IDN+instageni.sox.net+authority+cm" url="https://www.instageni.sox.net:12369/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
    <start type="time">2015-03-11T15:29:46Z</start>
    <end type="time">2015-03-11T15:29:46Z</end>
</lifetime>
<node id="urn:publicid:IDN+instageni.sox.net+node+procurve2">
  <port id="urn:publicid:IDN+instageni.sox.net+stitchport+procurve2:1.24.al2s">
    <capacity>1000000</capacity>
    <maximumReservableCapacity>1000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+instageni.sox.net+interface+procurve2:1.24.al2s">
      <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.atla.net.internet2.edu:eth5/2:sox-ig</remoteLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>1000000</capacity>
      <maximumReservableCapacity>1000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>3540-3554</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
</node>
</aggregate>
</stitching>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec IG-ST-1-al2s.rspec:

$ stitcher.py createsliver IG-ST-1b IG-ST-1-al2s.rspec -o
11:30:16 INFO    : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf
11:30:16 INFO    : Reading slice IG-ST-1b credential...
11:30:16 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1b expires on 2015-03-18 15:30:15 UTC
11:30:16 INFO    : Calling SCS...
11:30:18 INFO    : Multi-AM reservation will include resources from these aggregates:
11:30:18 INFO    : 	<Aggregate sox-ig>
11:30:18 INFO    : 	<Aggregate gpo-ig>
11:30:18 INFO    : 	<Aggregate al2s>
11:30:18 INFO    : 	<Aggregate ion>
11:30:18 INFO    : Stitcher doing createsliver at <Aggregate sox-ig>...
11:30:35 INFO    : ... Allocation at <Aggregate sox-ig> complete.
11:30:35 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:30:55 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:30:55 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
11:30:59 INFO    : ... Allocation at <Aggregate al2s> complete.
11:30:59 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:31:45 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:31:45 INFO    : Pausing 30 seconds to let circuit become ready...
11:32:23 INFO    : DCN circuit 156061 is ready at <Aggregate ion>
11:32:30 INFO    : ... Allocation at <Aggregate ion> complete.
11:32:30 INFO    : All aggregates are complete.
11:32:30 INFO    : Your resources expire at 2015-03-17T15:20:18 (UTC). 
11:32:30 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/SOX/IG-ST-1b-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1b at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each SOX and GPO aggregate:

$ readyToLogin.py IG-ST-1b --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 43834  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
  ....
ig-sox's geni_status is: ready 
User lnevers logs in to ig-sox using:
	ssh -p 32314  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.sox.net

Measurements

Iperf InstaGENI GPO VM to InstaGENI SOX VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-03-11

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   142 MBytes  19.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.2 sec  34.1 MBytes  4.76 Mbits/sec
[  7]  0.0-60.3 sec  28.0 MBytes  3.90 Mbits/sec
[  3]  0.0-60.8 sec  29.0 MBytes  4.00 Mbits/sec
[  6]  0.0-60.8 sec  26.8 MBytes  3.69 Mbits/sec
[  4]  0.0-61.0 sec  27.0 MBytes  3.71 Mbits/sec
[SUM]  0.0-61.0 sec   145 MBytes  19.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.4 sec  16.6 MBytes  2.31 Mbits/sec
[ 10]  0.0-60.5 sec  12.0 MBytes  1.66 Mbits/sec
[  9]  0.0-60.7 sec  12.9 MBytes  1.78 Mbits/sec
[ 11]  0.0-61.1 sec  10.6 MBytes  1.46 Mbits/sec
[  3]  0.0-61.3 sec  12.1 MBytes  1.66 Mbits/sec
[  8]  0.0-61.5 sec  13.9 MBytes  1.89 Mbits/sec
[  6]  0.0-61.6 sec  11.4 MBytes  1.55 Mbits/sec
[ 12]  0.0-61.7 sec  18.2 MBytes  2.48 Mbits/sec
[  7]  0.0-61.7 sec  21.9 MBytes  2.97 Mbits/sec
[  4]  0.0-61.8 sec  17.8 MBytes  2.41 Mbits/sec
[SUM]  0.0-61.8 sec   147 MBytes  20.0 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI SOX VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512812 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec   0.081 ms 413515/512806 (81%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI SOX VM

60 packets transmitted, 60 received, 0% packet loss, time 59099ms
rtt min/avg/max/mdev = 23.510/24.161/33.322/1.234 ms

Iperf InstaGENI SOX VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-03-11

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   142 MBytes  19.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.2 sec  23.6 MBytes  3.29 Mbits/sec
[  5]  0.0-60.4 sec  33.2 MBytes  4.62 Mbits/sec
[  7]  0.0-60.4 sec  26.0 MBytes  3.61 Mbits/sec
[  3]  0.0-60.4 sec  29.4 MBytes  4.08 Mbits/sec
[  4]  0.0-60.8 sec  32.1 MBytes  4.43 Mbits/sec
[SUM]  0.0-60.8 sec   144 MBytes  19.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec  14.9 MBytes  2.08 Mbits/sec
[ 12]  0.0-60.3 sec  9.50 MBytes  1.32 Mbits/sec
[  5]  0.0-60.4 sec  16.5 MBytes  2.29 Mbits/sec
[  7]  0.0-60.5 sec  21.2 MBytes  2.94 Mbits/sec
[  8]  0.0-60.6 sec  15.1 MBytes  2.09 Mbits/sec
[ 11]  0.0-61.2 sec  13.9 MBytes  1.90 Mbits/sec
[  3]  0.0-61.2 sec  15.6 MBytes  2.14 Mbits/sec
[  4]  0.0-61.7 sec  15.4 MBytes  2.09 Mbits/sec
[  9]  0.0-61.8 sec  7.38 MBytes  1.00 Mbits/sec
[ 10]  0.0-62.2 sec  17.9 MBytes  2.41 Mbits/sec
[SUM]  0.0-62.2 sec   147 MBytes  19.9 Mbits/sec

Iperf InstaGENI SOX VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512761 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec  13.598 ms 413562/512758 (81%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from InstaGENI SOX VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59054ms
rtt min/avg/max/mdev = 23.694/24.034/25.691/0.366 ms

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2a IG-ST-2.rspec -o
12:50:16 INFO    : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf
12:50:16 INFO    : Reading slice IG-ST-2a credential...
12:50:16 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2a expires on 2015-03-18 15:55:15 UTC
12:50:16 INFO    : Calling SCS...
12:50:20 INFO    : Multi-AM reservation will include resources from these aggregates:
12:50:20 INFO    : 	<Aggregate sox-ig>
12:50:20 INFO    : 	<Aggregate gpo-ig>
12:50:20 INFO    : 	<Aggregate al2s>
12:50:20 INFO    : 	<Aggregate ion>
12:50:20 INFO    : Stitcher doing createsliver at <Aggregate sox-ig>...
12:50:39 INFO    : ... Allocation at <Aggregate sox-ig> complete.
12:50:39 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
12:50:55 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
12:50:55 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
12:51:00 INFO    : ... Allocation at <Aggregate al2s> complete.
12:51:01 INFO    : Stitcher doing createsliver at <Aggregate ion>...
12:51:50 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
12:51:50 INFO    : Pausing 30 seconds to let circuit become ready...
12:52:28 INFO    : Pausing 30 seconds to let circuit become ready...
12:53:06 INFO    : DCN circuit 156161 is ready at <Aggregate ion>
12:53:06 INFO    : DCN circuit 156151 is ready at <Aggregate ion>
12:53:14 INFO    : ... Allocation at <Aggregate ion> complete.
12:53:14 INFO    : All aggregates are complete.
12:53:14 INFO    : Your resources expire at 2015-03-17T16:40:20 (UTC). 
12:53:14 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/SOX/IG-ST-2a-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each SOX and GPO aggregate:

$ readyToLogin.py IG-ST-2a --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 36410  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
  ....
ig-sox's geni_status is: ready 
User lnevers logs in to ig-sox using:
	ssh -p 32314  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.sox.net

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

$ remote-execute.py IG-ST-2a -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q"
1. Find login Info for hosts in slice IG-ST-2a
2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo

PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59087ms
rtt min/avg/max/mdev = 23.746/24.483/47.789/3.058 ms
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 60000ms
rtt min/avg/max/mdev = 23.771/24.550/47.979/3.110 ms
... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo

IG-ST-3 IG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
09:48:32 INFO    : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf
09:48:32 INFO    : Reading slice IG-ST-3 credential...
09:48:33 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2015-03-18 16:25:32 UTC
09:48:33 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
09:48:33 INFO    : Calling SCS...
09:48:35 INFO    : Multi-AM reservation will include resources from these aggregates:
09:48:35 INFO    : 	<Aggregate cwru-ig>
09:48:35 INFO    : 	<Aggregate sox-ig>
09:48:35 INFO    : 	<Aggregate gpo-ig>
09:48:35 INFO    : 	<Aggregate al2s>
09:48:35 INFO    : 	<Aggregate ion>
09:48:35 INFO    : Stitcher doing createsliver at <Aggregate cwru-ig>...
09:48:52 INFO    : ... Allocation at <Aggregate cwru-ig> complete.
09:48:52 INFO    : Stitcher doing createsliver at <Aggregate sox-ig>...
09:49:11 INFO    : ... Allocation at <Aggregate sox-ig> complete.
09:49:11 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
09:49:27 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
09:49:27 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
09:49:35 INFO    : ... Allocation at <Aggregate al2s> complete.
09:49:35 INFO    : Stitcher doing createsliver at <Aggregate ion>...
09:50:20 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
09:50:20 INFO    : Pausing 30 seconds to let circuit become ready...
09:50:58 INFO    : Pausing 30 seconds to let circuit become ready...
09:51:45 INFO    : DCN circuit 156311 is ready at <Aggregate ion>
09:51:53 INFO    : ... Allocation at <Aggregate ion> complete.
09:51:53 INFO    : All aggregates are complete.
09:51:53 INFO    : Your resources expire at 2015-03-18T13:38:35 (UTC). 
09:51:53 INFO    : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/SOX/IG-ST-3-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the SOX host:

$ readyToLogin.py IG-ST-3 -a sox-ig
  ....
ig-sox's geni_status is: ready 
User lnevers logs in to ig-sox using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.sox.net

Login to the SOX host and ping each remote:

#ping GPO IG 
lnevers@ig-sox:~$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59076ms
rtt min/avg/max/mdev = 24.479/25.395/49.485/3.146 ms

# CWRU IG
lnevers@ig-sox:~$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59082ms
rtt min/avg/max/mdev = 23.011/23.591/46.151/2.939 ms

IG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o 
10:04:38 INFO    : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf
10:04:39 INFO    : Reading slice IG-ST-4 credential...
10:04:39 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2015-03-18 17:29:53 UTC
10:04:39 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
10:04:39 INFO    : Calling SCS...
10:04:41 INFO    : Multi-AM reservation will include resources from these aggregates:
10:04:41 INFO    : 	<Aggregate sox-ig>
10:04:41 INFO    : 	<Aggregate al2s>
10:04:41 INFO    : 	<Aggregate gpo-eg>
10:04:41 INFO    : 	<Aggregate ion>
10:04:41 INFO    : Stitcher doing createsliver at <Aggregate sox-ig>...
10:04:58 INFO    : ... Allocation at <Aggregate sox-ig> complete.
10:04:58 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
10:05:15 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
10:05:15 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
10:05:20 INFO    : ... Allocation at <Aggregate al2s> complete.
10:05:20 INFO    : Stitcher doing createsliver at <Aggregate ion>...
10:06:05 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
10:06:05 INFO    : Pausing 30 seconds to let circuit become ready...
10:06:43 INFO    : DCN circuit 156321 is ready at <Aggregate ion>
10:06:50 INFO    : ... Allocation at <Aggregate ion> complete.
10:06:50 INFO    : All aggregates are complete.
10:06:50 INFO    : Your resources expire at 2015-03-18T13:54:41 (UTC). 
10:06:50 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/SOX/IG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each SOX and GPO aggregate:

$ readyToLogin.py IG-ST-4 --useSliceAggregates
  ....
eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.11
  ....
ig-sox's geni_status is: ready 
User lnevers logs in to ig-sox using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.sox.net

Measurements

Iperf ExoGENI GPO VM to InstaGENI SOX VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2015-03-12

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   138 MBytes  19.2 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  28.0 MBytes  3.91 Mbits/sec
[  5]  0.0-60.2 sec  28.1 MBytes  3.92 Mbits/sec
[  6]  0.0-60.3 sec  27.8 MBytes  3.86 Mbits/sec
[  3]  0.0-60.4 sec  28.1 MBytes  3.91 Mbits/sec
[  7]  0.0-60.5 sec  28.6 MBytes  3.97 Mbits/sec
[SUM]  0.0-60.5 sec   141 MBytes  19.5 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec  14.6 MBytes  2.04 Mbits/sec
[  4]  0.0-60.1 sec  15.2 MBytes  2.13 Mbits/sec
[  7]  0.0-60.1 sec  13.4 MBytes  1.87 Mbits/sec
[  6]  0.0-60.2 sec  14.4 MBytes  2.00 Mbits/sec
[  8]  0.0-60.2 sec  14.1 MBytes  1.97 Mbits/sec
[ 10]  0.0-60.3 sec  15.6 MBytes  2.17 Mbits/sec
[  9]  0.0-60.4 sec  14.9 MBytes  2.06 Mbits/sec
[  3]  0.0-60.9 sec  15.1 MBytes  2.08 Mbits/sec
[ 12]  0.0-61.1 sec  13.6 MBytes  1.87 Mbits/sec
[ 11]  0.0-61.6 sec  13.5 MBytes  1.84 Mbits/sec
[SUM]  0.0-61.6 sec   144 MBytes  19.7 Mbits/sec

Iperf ExoGENI GPO VM to InstaGENI SOX VM (UDP) - UDP buffer size: 208 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512819 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   139 MBytes  19.5 Mbits/sec   0.211 ms 413482/512815 (81%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from ExoGENI GPO VM to the InstaGENI SOX VM

60 packets transmitted, 60 received, 0% packet loss, time 59091ms
rtt min/avg/max/mdev = 24.608/25.043/28.505/0.534 ms

Iperf InstaGENI SOX VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-03-12

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   139 MBytes  19.3 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  34.4 MBytes  4.80 Mbits/sec
[  6]  0.0-60.2 sec  29.5 MBytes  4.11 Mbits/sec
[  7]  0.0-60.5 sec  20.4 MBytes  2.83 Mbits/sec
[  3]  0.0-60.7 sec  32.9 MBytes  4.54 Mbits/sec
[  5]  0.0-61.0 sec  27.6 MBytes  3.80 Mbits/sec
[SUM]  0.0-61.0 sec   145 MBytes  19.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.2 sec  24.1 MBytes  3.36 Mbits/sec
[ 10]  0.0-60.3 sec  14.4 MBytes  2.00 Mbits/sec
[  8]  0.0-60.6 sec  13.5 MBytes  1.87 Mbits/sec
[ 12]  0.0-60.7 sec  10.9 MBytes  1.50 Mbits/sec
[  3]  0.0-60.8 sec  12.9 MBytes  1.78 Mbits/sec
[  4]  0.0-60.9 sec  18.4 MBytes  2.53 Mbits/sec
[  9]  0.0-61.1 sec  11.6 MBytes  1.60 Mbits/sec
[ 11]  0.0-61.2 sec  9.75 MBytes  1.34 Mbits/sec
[  5]  0.0-61.5 sec  10.0 MBytes  1.36 Mbits/sec
[  7]  0.0-61.7 sec  20.1 MBytes  2.74 Mbits/sec
[SUM]  0.0-61.7 sec   146 MBytes  19.8 Mbits/sec

Iperf InstaGENI SOX VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512763 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  14.672 ms 413442/512759 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order

Ping from InstaGENI SOX VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59092ms
rtt min/avg/max/mdev = 24.570/25.148/30.329/0.814 ms

IG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the SOX Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. Added site to the list of GENI Network Stitching Sites.

IG-ST-6 New Site OpenFlow topology

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

$ stitcher.py createsliver IG-ST-6a IG-ST-6.rspec -o
16:05:08 INFO    : Configured logging from file /home/lnevers/gcf-2.9-pre1/src/gcf/stitcher_logging.conf
16:05:09 INFO    : Reading slice IG-ST-6a credential...
16:05:09 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6a expires on 2015-03-18 20:05:06 UTC
16:05:09 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
16:05:09 INFO    : Calling SCS...
16:05:12 INFO    : Multi-AM reservation will include resources from these aggregates:
16:05:12 INFO    : 	<Aggregate sox-ig>
16:05:12 INFO    : 	<Aggregate gpo-ig>
16:05:12 INFO    : 	<Aggregate al2s>
16:05:12 INFO    : 	<Aggregate ion>
16:05:12 INFO    : Stitcher doing createsliver at <Aggregate sox-ig>...
16:05:28 INFO    : ... Allocation at <Aggregate sox-ig> complete.
16:05:28 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
16:05:45 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
16:05:45 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
16:05:50 INFO    : ... Allocation at <Aggregate al2s> complete.
16:05:50 INFO    : Stitcher doing createsliver at <Aggregate ion>...
16:06:35 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
16:06:35 INFO    : Pausing 30 seconds to let circuit become ready...
16:07:12 INFO    : Pausing 30 seconds to let circuit become ready...
16:07:50 INFO    : DCN circuit 156291 is ready at <Aggregate ion>
16:07:58 INFO    : ... Allocation at <Aggregate ion> complete.
16:07:58 INFO    : All aggregates are complete.
16:07:58 INFO    : Your resources expire at 2015-03-17T19:55:12 (UTC). 
16:07:58 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/SOX/IG-ST-6a-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-6a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each SOX and GPO aggregate:

$ readyToLogin.py IG-ST-6a --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 36666  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
 ...
ig-sox's geni_status is: ready 
User lnevers logs in to ig-sox using:
	ssh -p 32314  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.sox.net
XXX

Measurements

Iperf InstaGENI GPO VM to InstaGENI SOX VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-03-11

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   141 MBytes  19.6 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-59.6 sec  26.9 MBytes  3.78 Mbits/sec
[  4]  0.0-59.8 sec  27.6 MBytes  3.88 Mbits/sec
[  3]  0.0-60.3 sec  31.4 MBytes  4.37 Mbits/sec
[  7]  0.0-60.6 sec  24.9 MBytes  3.45 Mbits/sec
[  5]  0.0-61.0 sec  32.4 MBytes  4.45 Mbits/sec
[SUM]  0.0-61.0 sec   143 MBytes  19.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 10]  0.0-60.2 sec  17.1 MBytes  2.39 Mbits/sec
[  6]  0.0-60.5 sec  13.5 MBytes  1.87 Mbits/sec
[  4]  0.0-60.5 sec  12.1 MBytes  1.68 Mbits/sec
[ 11]  0.0-60.8 sec  13.4 MBytes  1.85 Mbits/sec
[  8]  0.0-61.0 sec  12.6 MBytes  1.74 Mbits/sec
[ 12]  0.0-61.0 sec  19.8 MBytes  2.72 Mbits/sec
[  7]  0.0-61.4 sec  19.0 MBytes  2.60 Mbits/sec
[  3]  0.0-61.5 sec  14.4 MBytes  1.96 Mbits/sec
[  5]  0.0-61.8 sec  13.2 MBytes  1.80 Mbits/sec
[  9]  0.0-61.9 sec  11.0 MBytes  1.49 Mbits/sec
[SUM]  0.0-61.9 sec   146 MBytes  19.8 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI SOX VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512807 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  13.994 ms 413638/512806 (81%)
[  3]  0.0-60.2 sec  71 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI SOX VM

60 packets transmitted, 60 received, 0% packet loss, time 59104ms
rtt min/avg/max/mdev = 24.338/28.880/120.603/17.794 ms

Iperf InstaGENI SOX VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-03-11

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.3 sec   140 MBytes  19.4 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.5 sec  22.6 MBytes  3.13 Mbits/sec
[  7]  0.0-60.9 sec  23.9 MBytes  3.29 Mbits/sec
[  4]  0.0-61.1 sec  23.0 MBytes  3.16 Mbits/sec
[  5]  0.0-61.1 sec  40.6 MBytes  5.58 Mbits/sec
[  6]  0.0-61.1 sec  32.5 MBytes  4.46 Mbits/sec
[SUM]  0.0-61.1 sec   143 MBytes  19.6 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-59.0 sec  17.0 MBytes  2.42 Mbits/sec
[  4]  0.0-59.5 sec  18.0 MBytes  2.54 Mbits/sec
[  7]  0.0-59.7 sec  19.4 MBytes  2.72 Mbits/sec
[  9]  0.0-59.8 sec  10.0 MBytes  1.40 Mbits/sec
[ 11]  0.0-60.0 sec  13.5 MBytes  1.89 Mbits/sec
[  5]  0.0-60.7 sec  9.62 MBytes  1.33 Mbits/sec
[  6]  0.0-60.7 sec  13.8 MBytes  1.90 Mbits/sec
[  8]  0.0-60.9 sec  16.1 MBytes  2.22 Mbits/sec
[ 12]  0.0-60.9 sec  9.88 MBytes  1.36 Mbits/sec
[ 10]  0.0-61.7 sec  16.0 MBytes  2.18 Mbits/sec
[SUM]  0.0-61.7 sec   143 MBytes  19.5 Mbits/sec

Iperf InstaGENI SOX VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512779 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   139 MBytes  19.3 Mbits/sec   7.597 ms 413918/512778 (81%)
[  3]  0.0-60.1 sec  73 datagrams received out-of-order

Ping from InstaGENI SOX VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59068ms
rtt min/avg/max/mdev = 24.486/28.234/136.246/16.021 ms

Email help@geni.net for GENI support or email me with feedback on this page!
Last modified 4 years ago Last modified on 03/12/15 10:43:56