= Rutgers University Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == IG-ST-1 New Site to GPO IG topology == The Rutgers site advertises the following stitching details: {{{ protogeni chainANDTree false false 2014-08-01T18:20:36Z 2014-08-01T18:20:36Z 1000000 1000000 1000 1 urn:publicid:IDN+ion.internet2.edu+interface+rtr.wash:xe-0/2/2:rutgers-ig 10 1000000 1000000 1000 1 l2sc ethernet 1500 3730-3739 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Rutgers/IG-ST-1-ion.rspec IG-ST-1-ion.rspec]: {{{ $ stitcher createsliver IG-ST-1 IG-ST-1-ion.rspec 14:25:09 INFO : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf 14:25:09 INFO : Reading slice IG-ST-1 credential... 14:25:09 INFO : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-1 expires on 2014-08-08 18:23:48 UTC 14:25:09 INFO : Calling SCS... 14:25:10 INFO : Multi-AM reservation will include resources from these aggregates: 14:25:10 INFO : 14:25:10 INFO : 14:25:10 INFO : 14:25:10 INFO : Stitcher doing createsliver at ... 14:25:26 INFO : ... Allocation at complete. 14:25:26 INFO : Stitcher doing createsliver at ... 14:25:41 INFO : ... Allocation at complete. 14:25:41 INFO : Stitcher doing createsliver at ... 14:26:26 INFO : DCN AM : must wait for status ready.... 14:26:26 INFO : Pausing 30 seconds to let circuit become ready... 14:27:03 INFO : DCN circuit 111291 is ready at 14:27:10 INFO : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-1-for-lnevers-cred.xml 14:27:10 INFO : ... Allocation at complete. 14:27:10 INFO : All aggregates are complete. 14:27:10 INFO : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-02 18:25:45 UTC at . Second expiration is 2014-08-08T18:23:48 UTC. 14:27:10 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-1-manifest-rspec-stitching-combined.xml' Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each Rutgers and GPO aggregate: {{{ $ readyToLogin.py IG-ST-1 -a rutgers-ig .... ig-rut's geni_status is: ready User lnevers logs in to ig-rut using: ssh -p 31802 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.rutgers.edu $ readyToLogin.py IG-ST-1 -a gpo-ig .... ig-gpo's geni_status is: changing User lnevers logs in to ig-gpo using: ssh -p 37946 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-08-XX'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 143 MBytes 19.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.2 sec 30.2 MBytes 4.21 Mbits/sec [ 5] 0.0-60.5 sec 24.8 MBytes 3.43 Mbits/sec [ 4] 0.0-60.6 sec 34.2 MBytes 4.74 Mbits/sec [ 3] 0.0-61.2 sec 27.2 MBytes 3.73 Mbits/sec [ 7] 0.0-61.3 sec 28.4 MBytes 3.88 Mbits/sec [SUM] 0.0-61.3 sec 145 MBytes 19.8 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 8] 0.0-60.2 sec 18.4 MBytes 2.56 Mbits/sec [ 3] 0.0-60.4 sec 12.0 MBytes 1.67 Mbits/sec [ 5] 0.0-60.5 sec 9.62 MBytes 1.34 Mbits/sec [ 12] 0.0-60.6 sec 9.50 MBytes 1.32 Mbits/sec [ 6] 0.0-60.7 sec 17.9 MBytes 2.47 Mbits/sec [ 4] 0.0-60.9 sec 22.9 MBytes 3.15 Mbits/sec [ 10] 0.0-61.0 sec 15.9 MBytes 2.18 Mbits/sec [ 11] 0.0-61.4 sec 16.5 MBytes 2.26 Mbits/sec [ 7] 0.0-62.1 sec 15.9 MBytes 2.14 Mbits/sec [ 9] 0.0-62.2 sec 8.62 MBytes 1.16 Mbits/sec [SUM] 0.0-62.2 sec 147 MBytes 19.8 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512813 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 12.952 ms 413453/512811 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the InstaGENI Rutgers VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59108ms rtt min/avg/max/mdev = 15.522/15.701/15.953/0.116 ms }}} '''Iperf InstaGENI Rutgers VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-08-01'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 143 MBytes 19.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 27.9 MBytes 3.89 Mbits/sec [ 7] 0.0-60.3 sec 36.6 MBytes 5.10 Mbits/sec [ 6] 0.0-60.4 sec 21.6 MBytes 3.01 Mbits/sec [ 4] 0.0-60.5 sec 30.4 MBytes 4.21 Mbits/sec [ 5] 0.0-60.7 sec 28.4 MBytes 3.92 Mbits/sec [SUM] 0.0-60.7 sec 145 MBytes 20.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.4 sec 19.2 MBytes 2.68 Mbits/sec [ 10] 0.0-60.5 sec 15.4 MBytes 2.13 Mbits/sec [ 9] 0.0-60.5 sec 18.1 MBytes 2.51 Mbits/sec [ 11] 0.0-60.7 sec 13.5 MBytes 1.87 Mbits/sec [ 8] 0.0-60.8 sec 8.00 MBytes 1.10 Mbits/sec [ 12] 0.0-60.8 sec 11.0 MBytes 1.52 Mbits/sec [ 7] 0.0-60.9 sec 12.2 MBytes 1.69 Mbits/sec [ 3] 0.0-61.0 sec 20.4 MBytes 2.80 Mbits/sec [ 5] 0.0-61.1 sec 11.8 MBytes 1.61 Mbits/sec [ 4] 0.0-62.1 sec 16.9 MBytes 2.28 Mbits/sec [SUM] 0.0-62.1 sec 146 MBytes 19.8 Mbits/sec }}} '''Iperf InstaGENI Rutgers VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512757 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 139 MBytes 19.5 Mbits/sec 0.109 ms 413391/512752 (81%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI Rutgers VM to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59110ms rtt min/avg/max/mdev = 15.399/15.701/15.905/0.121 ms }}} == IG-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Rutgers/IG-ST-2.rspec IG-ST-2.rspec]: {{{ $ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o 15:42:04 INFO : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf 15:42:04 INFO : Reading slice IG-ST-2 credential... 15:42:04 INFO : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-2 expires on 2014-08-08 19:10:48 UTC 15:42:04 INFO : Calling SCS... 15:42:06 INFO : Multi-AM reservation will include resources from these aggregates: 15:42:06 INFO : 15:42:06 INFO : 15:42:06 INFO : 15:42:06 INFO : Stitcher doing createsliver at ... 15:42:22 INFO : ... Allocation at complete. 15:42:22 INFO : Stitcher doing createsliver at ... 15:42:40 INFO : ... Allocation at complete. 15:42:40 INFO : Stitcher doing createsliver at ... 15:43:25 INFO : DCN AM : must wait for status ready.... 15:43:25 INFO : Pausing 30 seconds to let circuit become ready... 15:44:02 INFO : Pausing 30 seconds to let circuit become ready... 15:44:39 INFO : DCN circuit 111341 is ready at 15:44:39 INFO : DCN circuit 111331 is ready at 15:44:46 INFO : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-2-for-lnevers-cred.xml 15:44:46 INFO : ... Allocation at complete. 15:44:46 INFO : All aggregates are complete. 15:44:46 INFO : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-02 19:42:44 UTC at . Second expiration is 2014-08-08T19:10:48 UTC. 15:44:46 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-2-manifest-rspec-stitching-combined.xml' Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each Rutgers and GPO aggregate: {{{ $ readyToLogin.py IG-ST-2 -a rutgers-ig .... ig-rut's geni_status is: ready User lnevers logs in to ig-rut using: ssh -p 32058 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.rutgers.edu $ readyToLogin.py IG-ST-2 -a gpo-ig .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 38458 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ $ ping 10.10.4.2 -c 60 -q PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59062ms rtt min/avg/max/mdev = 15.059/15.379/31.411/2.090 ms $ ping 192.168.4.2 -c 60 -q PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59044ms rtt min/avg/max/mdev = 15.050/15.373/31.460/2.095 ms }}} == IG-ST-3 IG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Rutgers/IG-ST-3.rspe IG-ST-3.rspec]: {{{ $ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o 10:59:36 INFO : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf 10:59:37 INFO : Reading slice IG-ST-3 credential... 10:59:37 INFO : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-3 expires on 2014-08-11 11:58:32 UTC 10:59:37 INFO : Calling SCS... 10:59:39 INFO : Multi-AM reservation will include resources from these aggregates: 10:59:39 INFO : 10:59:39 INFO : 10:59:39 INFO : 10:59:39 INFO : 10:59:39 INFO : 10:59:39 INFO : Stitcher doing createsliver at ... 10:59:55 INFO : ... Allocation at complete. 10:59:55 INFO : Stitcher doing createsliver at ... 11:00:09 INFO : ... Allocation at complete. 11:00:09 INFO : Stitcher doing createsliver at ... 11:00:59 INFO : ... Allocation at complete. 11:00:59 INFO : Stitcher doing createsliver at ... 11:01:44 INFO : DCN AM : must wait for status ready.... 11:01:44 INFO : Pausing 30 seconds to let circuit become ready... 11:02:21 INFO : Pausing 30 seconds to let circuit become ready... 11:02:59 INFO : DCN circuit 111821 is ready at 11:02:59 INFO : DCN circuit 111811 is ready at 11:03:06 INFO : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-3-for-lnevers-cred.xml 11:03:06 INFO : ... Allocation at complete. 11:03:06 INFO : Stitcher doing createsliver at ... 11:03:21 INFO : ... Allocation at complete. 11:03:21 INFO : All aggregates are complete. 11:03:21 INFO : Your resources expire at 4 different times at different AMs. The first expiration is 2014-08-04 20:00:18 UTC at and . Second expiration is 2014-08-05T15:01:03 UTC. 11:03:21 INFO : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-3-manifest-rspec-stitching-combined.xml' Success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the Rutgers host: {{{ $ readyToLogin.py IG-ST-3 -a rutgers-ig .... ig-rut's geni_status is: ready User lnevers logs in to ig-rut using: ssh -p 32314 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.rutgers.edu }}} Login to the Rutgers host and ping each remote: {{{ #ping GPO IG [lnevers@ig-rut ~]$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59070ms rtt min/avg/max/mdev = 15.046/15.372/30.623/1.989 ms # Utah IG [lnevers@ig-rut ~]$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59085ms rtt min/avg/max/mdev = 87.086/87.416/87.945/0.219 ms }}} == IG-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Rutgers/IG-ST-4.rspec IG-ST-4.rspec]: {{{ $ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o --useExoSM 11:21:16 INFO : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf 11:21:17 INFO : Reading slice IG-ST-4 credential... 11:21:17 INFO : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-4 expires on 2014-08-11 13:51:33 UTC 11:21:17 INFO : Calling SCS... 11:21:18 INFO : is an EG AM and user asked for ExoSM. Changing to https://geni.renci.org:11443/orca/xmlrpc 11:21:18 INFO : Multi-AM reservation will include resources from these aggregates: 11:21:18 INFO : 11:21:18 INFO : 11:21:18 INFO : 11:21:18 INFO : Stitcher doing createsliver at ... 11:21:33 INFO : ... Allocation at complete. 11:21:33 INFO : Stitcher doing createsliver at ... 11:21:42 INFO : ... Allocation at complete. 11:21:42 INFO : Stitcher doing createsliver at ... 11:22:27 INFO : DCN AM : must wait for status ready.... 11:22:27 INFO : Pausing 30 seconds to let circuit become ready... 11:23:04 INFO : DCN circuit 111861 is ready at 11:23:11 INFO : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-4-for-lnevers-cred.xml 11:23:11 INFO : ... Allocation at complete. 11:23:11 INFO : All aggregates are complete. 11:23:11 WARNING : Did not find stitching hop 1's link in template manifest RSpec for path link-eggpo-ig 11:23:11 INFO : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-05 15:21:47 UTC at . Second expiration is 2014-08-11T13:51:33 UTC. 11:23:11 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-4-manifest-rspec-stitching-combined.xml' Success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each Rutgers and GPO aggregate: {{{ $ readyToLogin.py IG-ST-4 -a rutgers-ig .... ig-rut's geni_status is: ready User lnevers logs in to ig-rut using: ssh -p 32570 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.rutgers.edu $ readyToLogin.py IG-ST-4 -a eg-sm .... eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.7 }}} === Measurements === '''Iperf ExoGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-08-04'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 192 KBytes 26.1 Kbits/sec }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf ExoGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from ExoGENI GPO VM to the InstaGENI Rutgers VM ''' {{{ }}} '''Iperf InstaGENI Rutgers VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-08-04'' __One Client_ {{{ XXXX }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf InstaGENI Rutgers VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from InstaGENI Rutgers VM to ExoGENI GPO VM ''' {{{ }}}