= Rutgers University Stitching Confirmation Tests =
This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page.
== IG-ST-1 New Site to GPO IG topology ==
The Rutgers site advertises the following stitching details:
{{{
protogenichainANDTreefalsefalse2014-08-01T18:20:36Z2014-08-01T18:20:36Z1000000100000010001urn:publicid:IDN+ion.internet2.edu+interface+rtr.wash:xe-0/2/2:rutgers-ig101000000100000010001l2scethernet15003730-3739false
}}}
Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Rutgers/IG-ST-1-ion.rspec IG-ST-1-ion.rspec]:
{{{
$ stitcher createsliver IG-ST-1 IG-ST-1-ion.rspec
14:25:09 INFO : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
14:25:09 INFO : Reading slice IG-ST-1 credential...
14:25:09 INFO : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-1 expires on 2014-08-08 18:23:48 UTC
14:25:09 INFO : Calling SCS...
14:25:10 INFO : Multi-AM reservation will include resources from these aggregates:
14:25:10 INFO :
14:25:10 INFO :
14:25:10 INFO :
14:25:10 INFO : Stitcher doing createsliver at ...
14:25:26 INFO : ... Allocation at complete.
14:25:26 INFO : Stitcher doing createsliver at ...
14:25:41 INFO : ... Allocation at complete.
14:25:41 INFO : Stitcher doing createsliver at ...
14:26:26 INFO : DCN AM : must wait for status ready....
14:26:26 INFO : Pausing 30 seconds to let circuit become ready...
14:27:03 INFO : DCN circuit 111291 is ready at
14:27:10 INFO : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-1-for-lnevers-cred.xml
14:27:10 INFO : ... Allocation at complete.
14:27:10 INFO : All aggregates are complete.
14:27:10 INFO : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-02 18:25:45 UTC at . Second expiration is 2014-08-08T18:23:48 UTC.
14:27:10 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-1-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
}}}
Determined login information at each Rutgers and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-1 -a rutgers-ig
....
ig-rut's geni_status is: ready
User lnevers logs in to ig-rut using:
ssh -p 31802 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.rutgers.edu
$ readyToLogin.py IG-ST-1 -a gpo-ig
....
ig-gpo's geni_status is: changing
User lnevers logs in to ig-gpo using:
ssh -p 37946 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
}}}
=== Measurements ===
'''Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 23.5 KByte (default)'''
''Collected: 2014-08-XX''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 143 MBytes 19.9 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-60.2 sec 30.2 MBytes 4.21 Mbits/sec
[ 5] 0.0-60.5 sec 24.8 MBytes 3.43 Mbits/sec
[ 4] 0.0-60.6 sec 34.2 MBytes 4.74 Mbits/sec
[ 3] 0.0-61.2 sec 27.2 MBytes 3.73 Mbits/sec
[ 7] 0.0-61.3 sec 28.4 MBytes 3.88 Mbits/sec
[SUM] 0.0-61.3 sec 145 MBytes 19.8 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 8] 0.0-60.2 sec 18.4 MBytes 2.56 Mbits/sec
[ 3] 0.0-60.4 sec 12.0 MBytes 1.67 Mbits/sec
[ 5] 0.0-60.5 sec 9.62 MBytes 1.34 Mbits/sec
[ 12] 0.0-60.6 sec 9.50 MBytes 1.32 Mbits/sec
[ 6] 0.0-60.7 sec 17.9 MBytes 2.47 Mbits/sec
[ 4] 0.0-60.9 sec 22.9 MBytes 3.15 Mbits/sec
[ 10] 0.0-61.0 sec 15.9 MBytes 2.18 Mbits/sec
[ 11] 0.0-61.4 sec 16.5 MBytes 2.26 Mbits/sec
[ 7] 0.0-62.1 sec 15.9 MBytes 2.14 Mbits/sec
[ 9] 0.0-62.2 sec 8.62 MBytes 1.16 Mbits/sec
[SUM] 0.0-62.2 sec 147 MBytes 19.8 Mbits/sec
}}}
'''Iperf InstaGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 224 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512813 datagrams
[ 3] Server Report:
[ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 12.952 ms 413453/512811 (81%)
[ 3] 0.0-60.2 sec 1 datagrams received out-of-order
}}}
'''Ping from InstaGENI GPO VM to the InstaGENI Rutgers VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59108ms
rtt min/avg/max/mdev = 15.522/15.701/15.953/0.116 ms
}}}
'''Iperf InstaGENI Rutgers VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)'''
''Collected: 2014-08-01''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.1 sec 143 MBytes 19.9 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 27.9 MBytes 3.89 Mbits/sec
[ 7] 0.0-60.3 sec 36.6 MBytes 5.10 Mbits/sec
[ 6] 0.0-60.4 sec 21.6 MBytes 3.01 Mbits/sec
[ 4] 0.0-60.5 sec 30.4 MBytes 4.21 Mbits/sec
[ 5] 0.0-60.7 sec 28.4 MBytes 3.92 Mbits/sec
[SUM] 0.0-60.7 sec 145 MBytes 20.0 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-60.4 sec 19.2 MBytes 2.68 Mbits/sec
[ 10] 0.0-60.5 sec 15.4 MBytes 2.13 Mbits/sec
[ 9] 0.0-60.5 sec 18.1 MBytes 2.51 Mbits/sec
[ 11] 0.0-60.7 sec 13.5 MBytes 1.87 Mbits/sec
[ 8] 0.0-60.8 sec 8.00 MBytes 1.10 Mbits/sec
[ 12] 0.0-60.8 sec 11.0 MBytes 1.52 Mbits/sec
[ 7] 0.0-60.9 sec 12.2 MBytes 1.69 Mbits/sec
[ 3] 0.0-61.0 sec 20.4 MBytes 2.80 Mbits/sec
[ 5] 0.0-61.1 sec 11.8 MBytes 1.61 Mbits/sec
[ 4] 0.0-62.1 sec 16.9 MBytes 2.28 Mbits/sec
[SUM] 0.0-62.1 sec 146 MBytes 19.8 Mbits/sec
}}}
'''Iperf InstaGENI Rutgers VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512757 datagrams
[ 3] Server Report:
[ 3] 0.0-60.0 sec 139 MBytes 19.5 Mbits/sec 0.109 ms 413391/512752 (81%)
[ 3] 0.0-60.0 sec 1 datagrams received out-of-order
}}}
'''Ping from InstaGENI Rutgers VM to GPO InstaGENI VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59110ms
rtt min/avg/max/mdev = 15.399/15.701/15.905/0.121 ms
}}}
== IG-ST-2 New Site to GPO IG Loop topology ==
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Rutgers/IG-ST-2.rspec IG-ST-2.rspec]:
{{{
$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
15:42:04 INFO : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
15:42:04 INFO : Reading slice IG-ST-2 credential...
15:42:04 INFO : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-2 expires on 2014-08-08 19:10:48 UTC
15:42:04 INFO : Calling SCS...
15:42:06 INFO : Multi-AM reservation will include resources from these aggregates:
15:42:06 INFO :
15:42:06 INFO :
15:42:06 INFO :
15:42:06 INFO : Stitcher doing createsliver at ...
15:42:22 INFO : ... Allocation at complete.
15:42:22 INFO : Stitcher doing createsliver at ...
15:42:40 INFO : ... Allocation at complete.
15:42:40 INFO : Stitcher doing createsliver at ...
15:43:25 INFO : DCN AM : must wait for status ready....
15:43:25 INFO : Pausing 30 seconds to let circuit become ready...
15:44:02 INFO : Pausing 30 seconds to let circuit become ready...
15:44:39 INFO : DCN circuit 111341 is ready at
15:44:39 INFO : DCN circuit 111331 is ready at
15:44:46 INFO : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-2-for-lnevers-cred.xml
15:44:46 INFO : ... Allocation at complete.
15:44:46 INFO : All aggregates are complete.
15:44:46 INFO : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-02 19:42:44 UTC at . Second expiration is 2014-08-08T19:10:48 UTC.
15:44:46 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-2-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
}}}
Determined login information at each Rutgers and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-2 -a rutgers-ig
....
ig-rut's geni_status is: ready
User lnevers logs in to ig-rut using:
ssh -p 32058 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.rutgers.edu
$ readyToLogin.py IG-ST-2 -a gpo-ig
....
ig-gpo's geni_status is: ready
User lnevers logs in to ig-gpo using:
ssh -p 38458 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com
}}}
Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:
{{{
$ ping 10.10.4.2 -c 60 -q
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.
--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59062ms
rtt min/avg/max/mdev = 15.059/15.379/31.411/2.090 ms
$ ping 192.168.4.2 -c 60 -q
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.
--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59044ms
rtt min/avg/max/mdev = 15.050/15.373/31.460/2.095 ms
}}}
== IG-ST-3 IG-ST-3 New Site 3 node linear topology ==
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Rutgers/IG-ST-3.rspe IG-ST-3.rspec]:
{{{
$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
09:56:44 INFO : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
09:56:44 INFO : Reading slice IG-ST-3 credential...
09:56:45 INFO : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-3 expires on 2014-08-11 11:58:32 UTC
09:56:45 INFO : Calling SCS...
09:56:46 INFO : Multi-AM reservation will include resources from these aggregates:
09:56:46 INFO :
09:56:46 INFO :
09:56:46 INFO :
09:56:46 INFO :
09:56:46 INFO :
09:56:46 INFO : Stitcher doing createsliver at ...
09:57:03 INFO : ... Allocation at complete.
09:57:03 INFO : Stitcher doing createsliver at ...
09:57:19 INFO : ... Allocation at complete.
09:57:19 INFO : Stitcher doing createsliver at ...
09:57:56 INFO : ... Allocation at complete.
09:57:56 INFO : Stitcher doing createsliver at ...
09:58:40 INFO : DCN AM : must wait for status ready....
09:58:40 INFO : Pausing 30 seconds to let circuit become ready...
09:59:17 INFO : Pausing 30 seconds to let circuit become ready...
09:59:55 INFO : DCN circuit 111731 is ready at
09:59:55 INFO : DCN circuit 111741 is ready at
10:00:02 INFO : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-3-for-lnevers-cred.xml
10:00:02 INFO : ... Allocation at complete.
10:00:02 INFO : Stitcher doing createsliver at ...
10:00:22 INFO : ... Allocation at complete.
10:00:22 INFO : All aggregates are complete.
10:00:22 INFO : Your resources expire at 4 different times at different AMs. The first expiration is 2014-08-04 18:57:24 UTC at and . Second expiration is 2014-08-05T13:58:00 UTC.
10:00:22 INFO : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-3-manifest-rspec-stitching-combined.xml'
}}}
Determined login information the Rutgers host:
{{{
$ readyToLogin.py IG-ST-3 -a rutgers-ig
....
ig-rut's geni_status is: ready
User lnevers logs in to ig-rut using:
ssh -p 32570 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.rutgers.edu
}}}
Login to the Rutgers host and ping each remote:
{{{
#ping GPO IG
[lnevers@ig-rut ~]$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59070ms
rtt min/avg/max/mdev = 15.046/15.372/30.623/1.989 ms
# Utah IG
[lnevers@ig-rut ~]$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.
--- 192.168.4.1 ping statistics ---
60 packets transmitted, 0 received, +45 errors, 100% packet loss, time 59013ms
pipe 3
}}}
***FAILURE*****
== IG-ST-4 New Site to GPO EG interoperability ==
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Rutgers/IG-ST-4.rspec IG-ST-4.rspec]:
{{{
$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o
09:52:17 INFO : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
09:52:17 INFO : Reading slice IG-ST-4 credential...
09:52:17 INFO : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-4 expires on 2014-08-11 13:51:33 UTC
09:52:17 INFO : Calling SCS...
09:52:19 INFO : Multi-AM reservation will include resources from these aggregates:
09:52:19 INFO :
09:52:19 INFO :
09:52:19 INFO :
09:52:19 INFO : Stitcher doing createsliver at ...
09:52:36 INFO : ... Allocation at complete.
09:52:36 INFO : Stitcher doing createsliver at ...
09:52:47 INFO : ... Allocation at complete.
09:52:47 INFO : Stitcher doing createsliver at ...
09:53:31 INFO : DCN AM : must wait for status ready....
09:53:31 INFO : Pausing 30 seconds to let circuit become ready...
09:54:09 INFO : DCN circuit 111721 is ready at
09:54:16 INFO : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-4-for-lnevers-cred.xml
09:54:16 INFO : ... Allocation at complete.
09:54:16 INFO : All aggregates are complete.
09:54:16 WARNING : Did not find stitching hop 1's link in template manifest RSpec for path link-eggpo-igutah
09:54:16 INFO : Your resources expire at 2 different times at different AMs. The first expiration is 2014-08-05 13:52:51 UTC at . Second expiration is 2014-08-11T13:51:33 UTC.
09:54:16 INFO : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Rutgers/IG-ST-4-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
}}}
Determined login information at each Rutgers and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-4 -a rutgers-ig
....
ig-rut's geni_status is: ready
User lnevers logs in to ig-rut using:
ssh -p 32314 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.rutgers.edu
$ readyToLogin.py IG-ST-4 -a gpo-eg
....
eg-gpo's geni_status is: ready
User lnevers logs in to eg-gpo using:
ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.6
}}}
***FAILURE*****
=== Measurements ===
'''Iperf ExoGENI GPO VM to InstaGENI Rutgers VM (TCP) - TCP window size: 23.5 KByte (default)'''
''Collected: 2014-08-04''
__One Client_
{{{
}}}
__Five Clients__
{{{
}}}
__Ten Clients__
{{{
}}}
'''Iperf ExoGENI GPO VM to InstaGENI Rutgers VM (UDP) - UDP buffer size: 224 KByte (default) '''
{{{
}}}
'''Ping from ExoGENI GPO VM to the InstaGENI Rutgers VM '''
{{{
}}}
'''Iperf InstaGENI Rutgers VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)'''
''Collected: 2014-08-04''
__One Client_
{{{
XXXX
}}}
__Five Clients__
{{{
}}}
__Ten Clients__
{{{
}}}
'''Iperf InstaGENI Rutgers VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) '''
{{{
}}}
'''Ping from InstaGENI Rutgers VM to ExoGENI GPO VM '''
{{{
}}}