= Nortwestern University Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == IG-ST-1 New Site to GPO IG topology == The Northwestern site advertises the following stitching details: {{{ protogeni chainANDTree false false 2016-09-12T20:41:49Z 2016-09-12T20:41:49Z 1000000 1000000 1000 1 urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.star.net.internet2.edu:et-7/0/0.0:northwestern-ig 10 1000000 1000000 1000 1 l2sc ethernet 1500 2201-2215 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Northwestern/IG-ST-1-al2s.rspec IG-ST-1-al2s.rspec]: {{{ $ stitcher.py createsliver IG-ST-1 IG-ST-1-al2s.rspec -o 16:43:01 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 16:43:01 INFO : Reading slice IG-ST-1 credential... 16:43:01 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2016-09-19 20:42:53 UTC 16:43:01 INFO : Calling SCS... 16:43:06 INFO : Multi-AM reservation will include resources from these aggregates: 16:43:06 INFO : 16:43:06 INFO : 16:43:06 INFO : 16:43:06 INFO : Stitcher doing createsliver at ... 16:43:24 INFO : ... Allocation at complete. 16:43:24 INFO : Stitcher doing createsliver at ... 16:43:41 INFO : ... Allocation at complete. 16:43:41 INFO : Stitcher doing createsliver at ... 16:43:48 INFO : ... Allocation at complete. 16:43:48 INFO : All aggregates are complete. 16:43:48 INFO : Your resources expire at 2016-09-18T20:33:06 (UTC). 16:43:48 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Nortwestern/IG-ST-1-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each Northwestern and GPO aggregate: {{{ $ readyToLogin.py IG-ST-1 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 35386 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI Northwestern VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2016-09-12'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 616 MBytes 85.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 123 MBytes 17.2 Mbits/sec [ 6] 0.0-60.1 sec 103 MBytes 14.4 Mbits/sec [ 7] 0.0-60.1 sec 117 MBytes 16.4 Mbits/sec [ 4] 0.0-60.2 sec 132 MBytes 18.3 Mbits/sec [ 5] 0.0-60.3 sec 212 MBytes 29.5 Mbits/sec [SUM] 0.0-60.3 sec 687 MBytes 95.7 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.1 sec 66.9 MBytes 9.34 Mbits/sec [ 6] 0.0-60.1 sec 81.2 MBytes 11.3 Mbits/sec [ 4] 0.0-60.1 sec 73.4 MBytes 10.2 Mbits/sec [ 3] 0.0-60.1 sec 53.9 MBytes 7.52 Mbits/sec [ 10] 0.0-60.1 sec 87.4 MBytes 12.2 Mbits/sec [ 12] 0.0-60.2 sec 50.6 MBytes 7.06 Mbits/sec [ 8] 0.0-60.2 sec 78.0 MBytes 10.9 Mbits/sec [ 5] 0.0-60.2 sec 56.9 MBytes 7.92 Mbits/sec [ 9] 0.0-60.3 sec 90.5 MBytes 12.6 Mbits/sec [ 11] 0.0-60.5 sec 54.1 MBytes 7.51 Mbits/sec [SUM] 0.0-60.5 sec 693 MBytes 96.1 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI Northwestern VM (UDP) - UDP buffer size: 208 kByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512786 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 685 MBytes 95.6 Mbits/sec 0.092 ms 24347/512785 (4.7%) [ 3] 0.0-60.1 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the InstaGENI Northwestern VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59111ms rtt min/avg/max/mdev = 28.508/28.787/28.976/0.250 ms }}} '''Iperf InstaGENI Northwestern VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2016-09-12'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 635 MBytes 88.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.0 sec 156 MBytes 21.8 Mbits/sec [ 7] 0.0-60.0 sec 149 MBytes 20.8 Mbits/sec [ 3] 0.0-60.1 sec 115 MBytes 16.0 Mbits/sec [ 4] 0.0-60.1 sec 132 MBytes 18.4 Mbits/sec [ 5] 0.0-60.2 sec 136 MBytes 18.9 Mbits/sec [SUM] 0.0-60.2 sec 688 MBytes 95.9 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 60.6 MBytes 8.48 Mbits/sec [ 10] 0.0-60.0 sec 67.9 MBytes 9.49 Mbits/sec [ 11] 0.0-60.0 sec 59.4 MBytes 8.30 Mbits/sec [ 6] 0.0-60.0 sec 56.2 MBytes 7.86 Mbits/sec [ 3] 0.0-60.1 sec 80.1 MBytes 11.2 Mbits/sec [ 5] 0.0-60.1 sec 54.6 MBytes 7.63 Mbits/sec [ 9] 0.0-60.1 sec 68.8 MBytes 9.60 Mbits/sec [ 4] 0.0-60.1 sec 63.1 MBytes 8.81 Mbits/sec [ 8] 0.0-60.2 sec 85.4 MBytes 11.9 Mbits/sec [ 12] 0.0-60.5 sec 95.5 MBytes 13.2 Mbits/sec [SUM] 0.0-60.5 sec 692 MBytes 95.9 Mbits/sec }}} '''Iperf InstaGENI Northwestern VM to GPO InstaGENI VM (UDP) - UDP buffer size: 208 kByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512786 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 685 MBytes 95.5 Mbits/sec 0.115 ms 24440/512785 (4.8%) [ 3] 0.0-60.1 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI Northwestern VM to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59112ms rtt min/avg/max/mdev = 28.450/28.822/29.074/0.247 ms }}} == IG-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Northwestern/IG-ST-2.rspec IG-ST-2.rspec]: {{{ $ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o 16:49:21 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 16:49:21 INFO : Reading slice IG-ST-2 credential... 16:49:21 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2016-09-19 20:49:14 UTC 16:49:21 INFO : Calling SCS... 16:49:21 INFO : Multi-AM reservation will include resources from these aggregates: 16:49:21 INFO : 16:49:21 INFO : 16:49:21 INFO : 16:49:21 INFO : Stitcher doing createsliver at ... 16:49:42 INFO : ... Allocation at complete. 16:49:43 INFO : Stitcher doing createsliver at ... 16:50:00 INFO : ... Allocation at complete. 16:50:00 INFO : Stitcher doing createsliver at ... 16:50:10 INFO : ... Allocation at complete. 16:50:10 INFO : All aggregates are complete. 16:50:10 INFO : Your resources expire at 2016-09-18T20:39:21 (UTC). 16:50:10 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Nortwestern/IG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each Northwestern and GPO aggregate: {{{ $ readyToLogin.py IG-ST-2 --useSliceAggregates .... ig-gpo's geni_status is: changing User lnevers logs in to ig-gpo using: ssh -p 35898 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com ig-nw's geni_status is: changing User lnevers logs in to ig-nw using: ssh -p 32826 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.northwestern.edu }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ lnevers@ig-gpo:~$ ping 10.10.4.2 -c 60 -q PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59105ms rtt min/avg/max/mdev = 28.449/29.189/57.373/3.674 ms lnevers@ig-gpo:~$ ping 192.168.4.2 -c 60 -q PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59110ms rtt min/avg/max/mdev = 28.472/29.266/57.152/3.655 ms }}} == IG-ST-3 IG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Northwestern/IG-ST-3.rspec IG-ST-3.rspec]: {{{ $ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o 17:00:27 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 17:00:27 INFO : Reading slice IG-ST-3 credential... 17:00:27 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2016-09-19 21:00:19 UTC 17:00:27 INFO : Calling SCS... 17:00:29 INFO : Multi-AM reservation will include resources from these aggregates: 17:00:29 INFO : 17:00:29 INFO : 17:00:29 INFO : 17:00:29 INFO : 17:00:29 INFO : Stitcher doing createsliver at ... 17:00:49 INFO : ... Allocation at complete. 17:00:49 INFO : Stitcher doing createsliver at ... 17:01:16 INFO : ... Allocation at complete. 17:01:16 INFO : Stitcher doing createsliver at ... 17:01:34 INFO : ... Allocation at complete. 17:01:34 INFO : Stitcher doing createsliver at ... 17:01:45 INFO : ... Allocation at complete. 17:01:45 INFO : All aggregates are complete. 17:01:45 INFO : Your resources expire at 2016-09-18T20:50:29 (UTC). 17:01:45 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Nortwestern/IG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the Northwestern host: {{{ $ readyToLogin.py IG-ST-3 --useSliceAggregates .... ig-cw's geni_status is: ready User lnevers logs in to ig-cw using: ssh -p 38714 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.geni.case.edu ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 36154 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com ig-nw's geni_status is: ready User lnevers logs in to ig-nw using: ssh -p 33082 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.northwestern.edu }}} Login to the Northwestern host and ping each remote: {{{ #ping GPO IG lnevers@ig-nw:~$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59106ms rtt min/avg/max/mdev = 28.538/29.345/57.523/3.677 ms # Case IG lnevers@ig-gpo:~$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59091ms rtt min/avg/max/mdev = 10.321/10.807/20.807/1.322 ms }}} == IG-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Northwestern/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG. {{{ $ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o 08:49:33 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 08:49:33 INFO : Reading slice IG-ST-4 credential... 08:49:33 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2016-09-20 12:49:27 UTC 08:49:33 INFO : Calling SCS... 08:49:34 INFO : Multi-AM reservation will include resources from these aggregates: 08:49:34 INFO : 08:49:34 INFO : 08:49:34 INFO : 08:49:34 INFO : Stitcher doing createsliver at ... 08:49:43 INFO : ... Allocation at complete. 08:49:43 INFO : Stitcher doing createsliver at ... 08:50:00 INFO : ... Allocation at complete. 08:50:00 INFO : Stitcher doing createsliver at ... 08:50:06 INFO : ... Allocation at complete. 08:50:06 INFO : All aggregates are complete. 08:50:06 INFO : Your resources expire at 2016-09-19T12:39:34 (UTC). 08:50:06 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Nortwestern/IG-ST-4-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each Northwestern and GPO aggregate: {{{ $ readyToLogin.py IG-ST-4 --useSliceAggregates .... eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.55 ig-nw's geni_status is: ready User lnevers logs in to ig-nw using: ssh -p 33850 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.northwestern.edu }}} === Measurements === '''Iperf ExoGENI GPO VM to InstaGENI Northwestern VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2016-09-13'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 141 MBytes 19.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.2 sec 28.2 MBytes 3.94 Mbits/sec [ 7] 0.0-60.4 sec 27.1 MBytes 3.77 Mbits/sec [ 5] 0.0-60.4 sec 29.0 MBytes 4.02 Mbits/sec [ 6] 0.0-60.5 sec 27.6 MBytes 3.83 Mbits/sec [ 3] 0.0-60.5 sec 27.1 MBytes 3.76 Mbits/sec [SUM] 0.0-60.5 sec 139 MBytes 19.3 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 8] 0.0-60.5 sec 13.2 MBytes 1.84 Mbits/sec [ 10] 0.0-60.5 sec 13.9 MBytes 1.92 Mbits/sec [ 11] 0.0-60.7 sec 13.4 MBytes 1.85 Mbits/sec [ 4] 0.0-60.7 sec 13.4 MBytes 1.85 Mbits/sec [ 9] 0.0-60.7 sec 16.1 MBytes 2.23 Mbits/sec [ 3] 0.0-60.8 sec 13.8 MBytes 1.90 Mbits/sec [ 6] 0.0-60.8 sec 14.1 MBytes 1.95 Mbits/sec [ 5] 0.0-60.9 sec 14.2 MBytes 1.96 Mbits/sec [ 12] 0.0-61.0 sec 14.6 MBytes 2.01 Mbits/sec [ 7] 0.0-61.1 sec 13.8 MBytes 1.89 Mbits/sec [SUM] 0.0-61.1 sec 140 MBytes 19.3 Mbits/sec }}} '''Iperf ExoGENI GPO VM to InstaGENI Northwestern VM (UDP) - UDP buffer size: 208 kByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.6 sec 140 MBytes 19.4 Mbits/sec 0.036 ms 412700/512816 (80%) [ 3] 0.0-60.6 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI GPO VM to the InstaGENI Northwestern VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59092ms rtt min/avg/max/mdev = 28.150/28.567/30.051/0.249 ms }}} '''Iperf InstaGENI Northwestern VM to ExoGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2016-09-13'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 140 MBytes 19.6 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.0 sec 31.4 MBytes 4.38 Mbits/sec [ 4] 0.0-60.2 sec 23.6 MBytes 3.29 Mbits/sec [ 3] 0.0-60.3 sec 21.8 MBytes 3.03 Mbits/sec [ 5] 0.0-60.4 sec 21.0 MBytes 2.92 Mbits/sec [ 7] 0.0-60.8 sec 23.8 MBytes 3.27 Mbits/sec [SUM] 0.0-60.8 sec 122 MBytes 16.7 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.5 sec 12.4 MBytes 1.72 Mbits/sec [ 12] 0.0-60.5 sec 12.4 MBytes 1.72 Mbits/sec [ 4] 0.0-60.6 sec 15.1 MBytes 2.09 Mbits/sec [ 8] 0.0-60.8 sec 14.6 MBytes 2.02 Mbits/sec [ 9] 0.0-60.8 sec 13.2 MBytes 1.83 Mbits/sec [ 5] 0.0-60.8 sec 14.4 MBytes 1.98 Mbits/sec [ 10] 0.0-60.9 sec 15.5 MBytes 2.14 Mbits/sec [ 3] 0.0-61.0 sec 14.6 MBytes 2.01 Mbits/sec [ 11] 0.0-61.2 sec 15.2 MBytes 2.09 Mbits/sec [ 7] 0.0-61.3 sec 15.0 MBytes 2.05 Mbits/sec [SUM] 0.0-61.3 sec 142 MBytes 19.5 Mbits/sec }}} '''Iperf InstaGENI Northwestern VM to ExoGENI GPO VM (UDP) - UDP buffer size: 208 kByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512802 datagrams [ 3] Server Report: [ 3] 0.0-60.3 sec 139 MBytes 19.4 Mbits/sec 14.562 ms 413559/512799 (81%) [ 3] 0.0-60.3 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI Northwestern VM to ExoGENI GPO VM ''' {{{ 60 packets transmitted, 59 received, 1% packet loss, time 59101ms rtt min/avg/max/mdev = 28.343/29.165/39.888/2.326 ms }}} == IG-ST-5 Site Information == Various pages include stitching information for a site. Each of the following were verified for this site: 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/NorthwesternInstaGENI#GENINetworkStitching Northwestern Aggregate] page. 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs]. 3. ~~Stitching Computation Service logs were reviewed while testing stitching to this site.~~ No longer possible 4. Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. == IG-ST-6 New Site !OpenFlow topology == Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Northwestern/IG-ST-6.rspec IG-ST-6.rspec]: {{{ $ stitcher.py createsliver IG-ST-6a IG-ST-6.rspec -o 09:17:24 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 09:17:24 INFO : Reading slice IG-ST-6a credential... 09:17:24 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6a expires on 2016-09-20 13:17:15 UTC 09:17:24 INFO : Calling SCS... 09:17:25 INFO : Multi-AM reservation will include resources from these aggregates: 09:17:25 INFO : 09:17:25 INFO : 09:17:25 INFO : 09:17:25 INFO : Stitcher doing createsliver at ... 09:17:45 INFO : ... Allocation at complete. 09:17:45 INFO : Stitcher doing createsliver at ... 09:18:02 INFO : ... Allocation at complete. 09:18:02 INFO : Stitcher doing createsliver at ... 09:18:08 INFO : ... Allocation at complete. 09:18:08 INFO : All aggregates are complete. 09:18:08 INFO : Your resources expire at 2016-09-19T13:07:25 (UTC). 09:18:08 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Nortwestern/IG-ST-6a-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-6a at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each Northwestern and GPO aggregate: {{{ $ readyToLogin.py IG-ST-6a --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 37178 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com ig-nw's geni_status is: ready User lnevers logs in to ig-nw using: ssh -p 34106 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.northwestern.edu }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI Northwestern VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2016-09-13'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 612 MBytes 85.6 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-59.8 sec 136 MBytes 19.1 Mbits/sec [ 7] 0.0-60.0 sec 121 MBytes 16.9 Mbits/sec [ 5] 0.0-60.0 sec 159 MBytes 22.2 Mbits/sec [ 6] 0.0-60.1 sec 155 MBytes 21.6 Mbits/sec [ 3] 0.0-60.6 sec 111 MBytes 15.3 Mbits/sec [SUM] 0.0-60.6 sec 681 MBytes 94.2 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-59.4 sec 52.9 MBytes 7.47 Mbits/sec [ 11] 0.0-60.1 sec 56.1 MBytes 7.84 Mbits/sec [ 10] 0.0-60.1 sec 68.5 MBytes 9.56 Mbits/sec [ 5] 0.0-60.3 sec 72.1 MBytes 10.0 Mbits/sec [ 7] 0.0-60.4 sec 57.1 MBytes 7.93 Mbits/sec [ 4] 0.0-60.6 sec 58.6 MBytes 8.12 Mbits/sec [ 8] 0.0-60.6 sec 62.6 MBytes 8.67 Mbits/sec [ 6] 0.0-60.7 sec 69.1 MBytes 9.55 Mbits/sec [ 12] 0.0-60.7 sec 68.6 MBytes 9.48 Mbits/sec [ 9] 0.0-60.9 sec 122 MBytes 16.8 Mbits/sec [SUM] 0.0-60.9 sec 688 MBytes 94.7 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI Northwestern VM (UDP) - UDP buffer size: 208 kByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512782 datagrams [ 3] Server Report: [ 3] 0.0-59.9 sec 684 MBytes 95.8 Mbits/sec 0.122 ms 24803/512782 (4.8%) [ 3] 0.0-59.9 sec 61 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to InstaGENI Northwestern VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59108ms rtt min/avg/max/mdev = 28.266/37.043/384.556/47.194 ms }}} '''Iperf InstaGENI Northwestern VM to InstaGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2016-09-13'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 651 MBytes 90.8 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-59.9 sec 164 MBytes 23.0 Mbits/sec [ 3] 0.0-59.9 sec 154 MBytes 21.6 Mbits/sec [ 7] 0.0-60.1 sec 118 MBytes 16.5 Mbits/sec [ 5] 0.0-60.8 sec 132 MBytes 18.2 Mbits/sec [ 6] 0.0-61.4 sec 114 MBytes 15.6 Mbits/sec [SUM] 0.0-61.4 sec 683 MBytes 93.3 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-58.8 sec 71.6 MBytes 10.2 Mbits/sec [ 4] 0.0-59.1 sec 89.5 MBytes 12.7 Mbits/sec [ 5] 0.0-59.4 sec 77.8 MBytes 11.0 Mbits/sec [ 6] 0.0-59.4 sec 58.2 MBytes 8.23 Mbits/sec [ 12] 0.0-60.3 sec 60.9 MBytes 8.48 Mbits/sec [ 11] 0.0-60.3 sec 60.8 MBytes 8.46 Mbits/sec [ 8] 0.0-60.3 sec 62.6 MBytes 8.71 Mbits/sec [ 7] 0.0-60.4 sec 69.9 MBytes 9.70 Mbits/sec [ 10] 0.0-60.8 sec 65.4 MBytes 9.02 Mbits/sec [ 9] 0.0-61.1 sec 70.1 MBytes 9.63 Mbits/sec [SUM] 0.0-61.1 sec 687 MBytes 94.3 Mbits/sec }}} '''Iperf InstaGENI Northwestern VM to InstaGENI GPO VM (UDP) - UDP buffer size: 208 kByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512780 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 685 MBytes 95.7 Mbits/sec 0.089 ms 23874/512779 (4.7%) [ 3] 0.0-60.1 sec 57 datagrams received out-of-order }}} '''Ping from InstaGENI Northwestern VM to InstaGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59106ms rtt min/avg/max/mdev = 28.536/38.020/411.118/50.879 ms }}} ----- {{{ #!html Email help@geni.net for GENI support }}}