wiki:GeniNetworkStitchingConfirmationTestStatus/NYSERNet

Version 20 (modified by lnevers@bbn.com, 10 years ago) (diff)

--

NYSERNET Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The NYSERNet site advertises the following stitching details:

  <stitching lastUpdateTime="2013-11-19T15:44:19Z" xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/">
    <aggregate id="urn:publicid:IDN+instageni.nysernet.org+authority+cm" url="https://www.instageni.nysernet.org:12369/protogeni/xmlrpc/am">      
      <aggregatetype>        protogeni      </aggregatetype>
      <stitchingmode>        chainANDTree      </stitchingmode>
      <scheduledservices>        false      </scheduledservices>
      <negotiatedservices>        false      </negotiatedservices>
      <lifetime id="life">
            <start type="time">          2013-11-19T15:44:19Z        </start>
            <end type="time">          2013-11-19T15:44:19Z        </end>
      </lifetime>
      <node id="urn:publicid:IDN+instageni.nysernet.org+node+procurve2">
          <port id="urn:publicid:IDN+instageni.nysernet.org+stitchport+procurve2:1.19">
              <capacity>            1000000          </capacity>
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>
              <granularity>            1          </granularity>
              <link id="urn:publicid:IDN+instageni.nysernet.org+interface+procurve2:1.19">
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:xe-0/2/0:nysernet-ig            </remoteLinkId>
                  <trafficEngineeringMetric>              10            </trafficEngineeringMetric>
                  <capacity>              1000000            </capacity>
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>
                  <granularity>              1            </granularity>
                  <switchingCapabilityDescriptor>
                      <switchingcapType>                l2sc              </switchingcapType>
                      <encodingType>                ethernet              </encodingType>
                      <switchingCapabilitySpecificInfo>
                         <switchingCapabilitySpecificInfo_L2sc>
                            <interfaceMTU>                    9000                  </interfaceMTU>
                            <vlanRangeAvailability>                    1700-1719                  </vlanRangeAvailability>
                            <vlanTranslation>                    false                  </vlanTranslation>
                         </switchingCapabilitySpecificInfo_L2sc>
                      </switchingCapabilitySpecificInfo>
                  </switchingCapabilityDescriptor>
              </link>
          </port>
      </node>
    </aggregate>
  </stitching>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSPec IG-ST-1-ion.rspec:

$ omni.py createslice IG-ST-1
11:07:47 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
11:07:47 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
11:07:47 INFO     omni: Using control framework portal
11:07:48 INFO     omni: Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1, Expiration 2013-11-26 15:43:01
11:07:48 INFO     omni:  ------------------------------------------------------------
11:07:48 INFO     omni:  Completed createslice:
Args: createslice IG-ST-1

  Result Summary: Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1, Expiration 2013-11-26 15:43:01
 
11:07:48 INFO     omni:  ============================================================
lnevers@sendaria:~/gcf-2.4.1/stitch-test/NYSERNET$ stitcher.py createsliver IG-ST-1 IG-ST-1-ion.rspec -o
11:07:56 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
11:07:56 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
11:07:56 INFO     stitcher: Using control framework portal
11:07:56 INFO     stitcher: Checking that slice IG-ST-1 is valid...
11:07:57 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1 expires on 2013-11-26 15:43:01 UTC
11:07:58 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> speaks AM API v3, but sticking with v2
11:07:58 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
11:07:58 INFO     stitcher: Stitched reservation will include resources from these aggregates:
11:07:58 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm>
11:07:58 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
11:07:58 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
11:07:58 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-nysernet-org.xml'
11:07:58 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.nysernet.org:12369/protogeni/xmlrpc/am
11:08:14 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> complete.
11:08:14 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-gpolab-bbn-com.xml'
11:08:14 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
11:08:31 ERROR    omni:  {'output': "vlan tag 3729 for 'link' not available", 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+c5af8f2b44192f10c58801d205aeb88c', 'am_type': 'protogeni', 'geni_code': 1, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=c5af8f2b44192f10c58801d205aeb88c'}, 'value': 0}
11:08:31 INFO     stitch.Aggregate: Got AMAPIError doing createsliver IG-ST-1 at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag 3729 for 'link' not available.
11:08:31 INFO     stitch.launcher: Will put <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> back in the pool to allocate. Got Retry <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> 2th time with <Hop u'urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24' on path u'link'> new suggested 3732 (not 3729)
11:08:31 INFO     stitch.launcher: Pausing for 30 seconds for Aggregates to free up resources...


11:09:01 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-12-instageni-gpolab-bbn-com.xml'
11:09:01 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
11:09:20 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
11:09:20 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-ion-internet2-edu.xml'
11:09:20 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
11:10:03 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
11:10:03 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
11:10:40 INFO     stitch.Aggregate: DCN circuit 49711 is ready
11:10:47 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
11:10:47 INFO     stitch.launcher: All aggregates are complete.
11:10:47 INFO     stitcher: Writing to 'IG-ST-1-manifest-rspec-stitching-combined.xml'
11:10:47 INFO     stitcher: Saved combined reservation RSpec at 3 AMs to file IG-ST-1-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 link(s).

Determined login information at each NYSERNet and GPO aggregate:

$ readyToLogin.py IG-ST-1 -a nysernet-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.nysernet.org:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-nyse's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-nyse using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.nysernet.org

$ readyToLogin.py IG-ST-1 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-gpo using:
	ssh -p 38458  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI NYSERNet VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2013-11-19

One Client_

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec   532 MBytes  74.3 Mbits/sec

Five Clients

[  4]  0.0-60.1 sec   143 MBytes  20.0 Mbits/sec
[  8]  0.0-60.1 sec   142 MBytes  19.9 Mbits/sec
[  5]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec
[  6]  0.0-60.2 sec   142 MBytes  19.8 Mbits/sec
[  7]  0.0-60.2 sec   146 MBytes  20.3 Mbits/sec
[SUM]  0.0-60.2 sec   713 MBytes  99.4 Mbits/sec

Ten Clients

[ 14]  0.0-60.2 sec  72.0 MBytes  10.0 Mbits/sec
[ 13]  0.0-60.3 sec  70.4 MBytes  9.80 Mbits/sec
[ 12]  0.0-60.3 sec  73.8 MBytes  10.3 Mbits/sec
[ 11]  0.0-60.3 sec  70.5 MBytes  9.80 Mbits/sec
[  5]  0.0-60.3 sec  73.1 MBytes  10.2 Mbits/sec
[  9]  0.0-60.3 sec  74.4 MBytes  10.3 Mbits/sec
[ 10]  0.0-60.4 sec  72.8 MBytes  10.1 Mbits/sec
[ 15]  0.0-60.4 sec  65.4 MBytes  9.09 Mbits/sec
[  8]  0.0-60.4 sec  70.8 MBytes  9.83 Mbits/sec
[  4]  0.0-60.4 sec  72.8 MBytes  10.1 Mbits/sec
[SUM]  0.0-60.4 sec   716 MBytes  99.4 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI NYSERNet VM (UDP)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  1.03 GBytes   148 Mbits/sec
[  3] Sent 752689 datagrams
[  3] Server Report:
[  3]  0.0-61.6 sec   691 MBytes  94.1 Mbits/sec   0.076 ms 259714/752688 (35%)
[  3]  0.0-61.6 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI NYSERNet VM

60 packets transmitted, 60 received, 0% packet loss, time 59097ms
rtt min/avg/max/mdev = 11.429/11.691/18.220/0.916 ms

Iperf InstaGENI NYSERNet VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2013-11-19

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   510 MBytes  71.3 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec   251 MBytes  35.1 Mbits/sec
[  3]  0.0-60.1 sec   117 MBytes  16.4 Mbits/sec
[  6]  0.0-60.1 sec   111 MBytes  15.5 Mbits/sec
[  7]  0.0-60.1 sec   114 MBytes  15.9 Mbits/sec
[  4]  0.0-60.1 sec   114 MBytes  15.9 Mbits/sec
[SUM]  0.0-60.1 sec   708 MBytes  98.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.1 sec   110 MBytes  15.3 Mbits/sec
[  3]  0.0-60.1 sec   119 MBytes  16.6 Mbits/sec
[  7]  0.0-60.1 sec   114 MBytes  16.0 Mbits/sec
[  5]  0.0-60.1 sec  55.5 MBytes  7.74 Mbits/sec
[  9]  0.0-60.2 sec  47.0 MBytes  6.55 Mbits/sec
[  8]  0.0-60.2 sec  56.2 MBytes  7.84 Mbits/sec
[  4]  0.0-60.2 sec  49.9 MBytes  6.95 Mbits/sec
[ 10]  0.0-60.2 sec  49.2 MBytes  6.86 Mbits/sec
[ 11]  0.0-60.2 sec  49.1 MBytes  6.84 Mbits/sec
[ 12]  0.0-60.2 sec  58.2 MBytes  8.11 Mbits/sec
[SUM]  0.0-60.2 sec   708 MBytes  98.7 Mbits/sec

Iperf InstaGENI NYSERNet VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512756 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   691 MBytes  96.5 Mbits/sec   0.100 ms 19526/512755 (3.8%)
[  3]  0.0-60.1 sec  7 datagrams received out-of-order

Ping from InstaGENI NYSERNet VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59098ms
rtt min/avg/max/mdev = 11.439/11.550/11.894/0.102 ms

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSPec IG-ST-2.rspec:

$ omni.py createslice IG-ST-2
12:32:58 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
12:32:58 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
12:32:58 INFO     omni: Using control framework portal
12:33:00 INFO     omni: Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2, Expiration 2013-11-26 17:32:59
12:33:00 INFO     omni:  ------------------------------------------------------------
12:33:00 INFO     omni:  Completed createslice:
Args: createslice IG-ST-2

  Result Summary: Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2, Expiration 2013-11-26 17:32:59
 
12:33:00 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
12:33:05 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
12:33:05 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
12:33:05 INFO     stitcher: Using control framework portal
12:33:05 INFO     stitcher: Checking that slice IG-ST-2 is valid...
12:33:06 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2 expires on 2013-11-26 17:32:59 UTC
12:33:07 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> speaks AM API v3, but sticking with v2
12:33:07 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
12:33:07 INFO     stitcher: Stitched reservation will include resources from these aggregates:
12:33:07 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm>
12:33:07 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
12:33:07 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
12:33:07 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-nysernet-org.xml'
12:33:07 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.nysernet.org:12369/protogeni/xmlrpc/am
12:33:28 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> complete.
12:33:28 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-gpolab-bbn-com.xml'
12:33:28 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
12:33:46 ERROR    omni:  {'output': "vlan tag 3726 for 'link' not available", 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+81a5a1f64b6967381d9ead809ff3aa0d', 'am_type': 'protogeni', 'geni_code': 1, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=81a5a1f64b6967381d9ead809ff3aa0d'}, 'value': 0}
12:33:46 INFO     stitch.Aggregate: Got AMAPIError doing createsliver IG-ST-2 at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag 3726 for 'link' not available.
12:33:46 INFO     stitch.launcher: Will put <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> back in the pool to allocate. Got Retry <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> 2th time with <Hop u'urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24' on path u'link'> new suggested 3748 (not 3726)
12:33:46 INFO     stitch.launcher: Pausing for 30 seconds for Aggregates to free up resources...


12:34:16 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-12-instageni-gpolab-bbn-com.xml'
12:34:16 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
12:34:31 ERROR    omni:  {'output': "vlan tag 3748 for 'link' not available", 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+1ba8600b42cdd6d7b8d17fc00f19e262', 'am_type': 'protogeni', 'geni_code': 1, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=1ba8600b42cdd6d7b8d17fc00f19e262'}, 'value': 0}
12:34:31 INFO     stitch.Aggregate: Got AMAPIError doing createsliver IG-ST-2 at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag 3748 for 'link' not available.
12:34:31 INFO     stitch.launcher: Will put <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> back in the pool to allocate. Got Retry <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> 3th time with <Hop u'urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24' on path u'link'> new suggested 3749 (not 3748)
12:34:31 INFO     stitch.launcher: Pausing for 30 seconds for Aggregates to free up resources...


12:35:01 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-13-instageni-gpolab-bbn-com.xml'
12:35:01 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
12:35:19 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
12:35:19 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-ion-internet2-edu.xml'
12:35:19 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
12:36:03 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
12:36:03 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:36:40 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:37:17 INFO     stitch.Aggregate: DCN circuit 49741 is ready
12:37:17 INFO     stitch.Aggregate: DCN circuit 49731 is ready
12:37:24 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
12:37:24 INFO     stitch.launcher: All aggregates are complete.
12:37:24 INFO     stitcher: Writing to 'IG-ST-2-manifest-rspec-stitching-combined.xml'
12:37:24 INFO     stitcher: Saved combined reservation RSpec at 3 AMs to file IG-ST-2-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 link(s).

Determined login information at each NYSERNet and GPO aggregate:

$ readyToLogin.py IG-ST-2 -a nysernet-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.nysernet.org:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-nyse's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-nyse using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.nysernet.org

$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-gpo using:
	ssh -p 38458  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com

Login to each host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

[lnevers@ig-gpo ~]$ ping -c 60 -q 10.10.4.2
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59076ms
rtt min/avg/max/mdev = 11.193/11.495/23.349/1.547 ms

[lnevers@ig-gpo ~]$ ping -c 60 -q 192.168.4.2 
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59073ms
rtt min/avg/max/mdev = 11.179/11.502/23.663/1.587 ms

IG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSPec IG-ST-3.rspec:

$ omni.py createslice IG-ST-3
08:34:37 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
08:34:37 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
08:34:37 INFO     omni: Using control framework portal
08:34:38 INFO     omni: Created slice with Name IG-ST-3, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3, Expiration 2013-11-26 17:40:19
08:34:38 INFO     omni:  ------------------------------------------------------------
08:34:38 INFO     omni:  Completed createslice:
Args: createslice IG-ST-3

  Result Summary: Created slice with Name IG-ST-3, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3, Expiration 2013-11-26 17:40:19
 
08:34:38 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
08:34:58 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
08:34:58 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
08:34:58 INFO     stitcher: Using control framework portal
08:34:58 INFO     stitcher: Checking that slice IG-ST-3 is valid...
08:34:59 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3 expires on 2013-11-26 17:40:19 UTC
08:35:00 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> speaks AM API v3, but sticking with v2
08:35:00 INFO     stitcher: <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> speaks AM API v3, but sticking with v2
08:35:01 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
08:35:01 INFO     stitcher: <Aggregate urn:publicid:IDN+emulab.net+authority+cm> speaks AM API v3, but sticking with v2
08:35:01 INFO     stitcher: Stitched reservation will include resources from these aggregates:
08:35:01 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm>
08:35:01 INFO     stitcher: 	<Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm>
08:35:01 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
08:35:01 INFO     stitcher: 	<Aggregate urn:publicid:IDN+emulab.net+authority+cm>
08:35:01 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
08:35:01 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-instageni-nysernet-org.xml'
08:35:01 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.nysernet.org:12369/protogeni/xmlrpc/am
08:35:19 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> complete.
08:35:19 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-instageni-gpolab-bbn-com.xml'
08:35:19 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
08:35:37 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
08:35:37 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-emulab-net.xml'
08:35:37 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.emulab.net:12369/protogeni/xmlrpc/am
08:36:30 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+emulab.net+authority+cm> complete.
08:36:30 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-utah-geniracks-net.xml'
08:36:30 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
08:36:44 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> complete.
08:36:44 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-ion-internet2-edu.xml'
08:36:44 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
08:37:28 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
08:37:28 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
08:38:05 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
08:38:41 INFO     stitch.Aggregate: DCN circuit 50011 is ready
08:38:41 INFO     stitch.Aggregate: DCN circuit 50001 is ready
08:38:48 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
08:38:48 INFO     stitch.launcher: All aggregates are complete.
08:38:48 INFO     stitcher: Writing to 'IG-ST-3-manifest-rspec-stitching-combined.xml'
08:38:48 INFO     stitcher: Saved combined reservation RSpec at 5 AMs to file IG-ST-3-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 link(s).

Determined login information the NYSERNet host:

================================================================================
LOGIN INFO for AM: https://instageni.nysernet.org:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

nyse's geni_status is: ready (am_status:ready) 
User lnevers logs in to nyse using:
	ssh -p 33850  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.nysernet.org

Login to the NYSERNet host and ping each remote:

#ping GPO IG 
[lnevers@nyse ~]$  ping -c 60 -q 192.168.2.1
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 57 received, 5% packet loss, time 59082ms
rtt min/avg/max/mdev = 11.219/12.647/26.623/3.270 ms
# Utah IG
[lnevers@nyse ~]$ ping -c 60 -q 192.168.4.1
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59062ms
rtt min/avg/max/mdev = 82.621/84.281/166.063/10.655 ms

IG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSPec IG-ST-4.rspec:

$ omni.py createslice IG-ST-4
13:29:53 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
13:29:53 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
13:29:53 INFO     omni: Using control framework portal
13:29:55 INFO     omni: Created slice with Name IG-ST-4, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-4, Expiration 2013-11-26 18:29:54
13:29:55 INFO     omni:  ------------------------------------------------------------
13:29:55 INFO     omni:  Completed createslice:
Args: createslice IG-ST-4

  Result Summary: Created slice with Name IG-ST-4, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-4, Expiration 2013-11-26 18:29:54
 
13:29:55 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o
13:30:14 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
13:30:14 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
13:30:14 INFO     stitcher: Using control framework portal
13:30:15 INFO     stitcher: Checking that slice IG-ST-4 is valid...
13:30:16 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-4 expires on 2013-11-26 18:29:54 UTC
13:30:16 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> speaks AM API v3, but sticking with v2
13:30:17 INFO     stitcher: Stitched reservation will include resources from these aggregates:
13:30:17 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm>
13:30:17 INFO     stitcher: 	<Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>
13:30:17 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
13:30:17 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-instageni-nysernet-org.xml'
13:30:17 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.nysernet.org:12369/protogeni/xmlrpc/am
13:30:31 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> complete.
13:30:31 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-exogeni-net-bbnvmsite.xml'
13:30:31 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni.renci.org:11443/orca/xmlrpc
13:30:38 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnvmsite+interface+Bbn:ExoGeni:TenGigabitEthernet:1:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
13:30:38 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3739
13:30:38 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:GigabitEthernet:1:2:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
13:30:38 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3739
13:30:38 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:TenGigabitEthernet:1:1:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
13:30:38 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3739
13:30:38 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am> complete.
13:30:38 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-ion-internet2-edu.xml'
13:30:38 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
13:31:22 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
13:31:22 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:31:59 INFO     stitch.Aggregate: DCN circuit 49791 is ready
13:32:06 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
13:32:06 INFO     stitch.launcher: All aggregates are complete.
13:32:06 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnvmsite+interface+Bbn:ExoGeni:TenGigabitEthernet:1:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
13:32:06 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:GigabitEthernet:1:2:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
13:32:06 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:TenGigabitEthernet:1:1:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
13:32:06 ERROR    stitcher: Manifest RSpec file did not contain a Manifest RSpec (wrong type or schema)
13:32:06 INFO     stitcher: Writing to 'IG-ST-4-manifest-rspec-stitching-combined.xml'
13:32:06 INFO     stitcher: Saved combined reservation RSpec at 3 AMs to file IG-ST-4-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 link(s).

Determined login information at each NYSERNet and GPO aggregate:

$ readyToLogin.py IG-ST-4 -a nysernet-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.nysernet.org:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-nyse's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-nyse using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.nysernet.org
$ readyToLogin.py IG-ST-4 -a eg-sm
  ....
================================================================================
LOGIN INFO for AM: https://geni.renci.org:11443/orca/xmlrpc
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

eg-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.19

Measurements

Iperf ExoGENI GPO VM to InstaGENI NYSERNet VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2013-11-21

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-61.5 sec    728 KBytes  97.0 Kbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-61.2 sec    200 KBytes  26.8 Kbits/sec
[  7]  0.0-63.4 sec    232 KBytes  30.0 Kbits/sec
[  4]  0.0-66.9 sec    216 KBytes  26.4 Kbits/sec
[  5]  0.0-73.5 sec    248 KBytes  27.6 Kbits/sec
[  3]  0.0-76.4 sec    144 KBytes  15.5 Kbits/sec
[SUM]  0.0-76.4 sec  1.02 MBytes    112 Kbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  8]  0.0-60.2 sec  24.0 KBytes  3.27 Kbits/sec
[  9]  0.0-61.0 sec  24.0 KBytes  3.22 Kbits/sec
[  6]  0.0-63.5 sec    176 KBytes  22.7 Kbits/sec
[ 12]  0.0-64.8 sec    184 KBytes  23.2 Kbits/sec
[  7]  0.0-68.2 sec    136 KBytes  16.3 Kbits/sec
[  4]  0.0-70.5 sec    152 KBytes  17.7 Kbits/sec
[  3]  0.0-88.0 sec    208 KBytes  19.4 Kbits/sec
[  5]  0.0-91.9 sec    200 KBytes  17.8 Kbits/sec
[ 11]  0.0-107.0 sec  24.0 KBytes  1.84 Kbits/sec
[ 10]  0.0-107.2 sec  24.0 KBytes  1.83 Kbits/sec
[SUM]  0.0-107.2 sec  1.12 MBytes  88.0 Kbits/sec

Iperf ExoGENI GPO VM to InstaGENI NYSERNet VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec    719 MBytes    101 Mbits/sec
[  3] Sent 512820 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec    701 KBytes  95.3 Kbits/sec  18.606 ms 512291/512779 (1e+02%)

Ping from ExoGENI GPO VM to InstaGENI NYSERNet VM

60 packets transmitted, 60 received, 0% packet loss, time 59099ms
rtt min/avg/max/mdev = 11.447/11.689/12.302/0.211 ms

Iperf InstaGENI NYSERNet VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2013-11-21

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-61.8 sec  5.62 MBytes   763 Kbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-61.5 sec  4.50 MBytes   614 Kbits/sec
[  7]  0.0-79.0 sec   256 KBytes  26.5 Kbits/sec
[  4]  0.0-89.5 sec   256 KBytes  23.4 Kbits/sec
[  6]  0.0-93.7 sec   256 KBytes  22.4 Kbits/sec
[  5]  0.0-96.4 sec   256 KBytes  21.8 Kbits/sec
[SUM]  0.0-96.4 sec  5.50 MBytes   479 Kbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-64.1 sec  3.88 MBytes   507 Kbits/sec
[  6]  0.0-73.8 sec   384 KBytes  42.6 Kbits/sec
[  7]  0.0-78.2 sec   512 KBytes  53.6 Kbits/sec
[  4]  0.0-103.0 sec   384 KBytes  30.5 Kbits/sec
[ 10]  0.0-106.4 sec   384 KBytes  29.6 Kbits/sec
[  5]  0.0-117.0 sec   256 KBytes  17.9 Kbits/sec
[  9]  0.0-177.0 sec   256 KBytes  11.8 Kbits/sec
[  8]  0.0-220.2 sec   256 KBytes  9.52 Kbits/sec
[ 12]  0.0-225.1 sec   256 KBytes  9.32 Kbits/sec
[ 11]  0.0-233.9 sec   256 KBytes  8.97 Kbits/sec
[SUM]  0.0-233.9 sec  6.75 MBytes   242 Kbits/sec

Iperf InstaGENI NYSERNet VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   100 Mbits/sec
[  3] Sent 512596 datagrams
[  3] Server Report:
[  3]  0.0-59.5 sec   206 MBytes  29.0 Mbits/sec   0.146 ms 365742/512595 (71%)
[  3]  0.0-59.5 sec  1 datagrams received out-of-order

Ping from InstaGENI NYSERNet VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59103ms
rtt min/avg/max/mdev = 11.488/11.725/13.478/0.323 ms

IG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the NYSERNet Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. Added site to the list of GENI Network Stitching Sites.

Email help@geni.net for GENI support or email me with feedback on this page!