= NYSERNET Stitching Confirmation Tests =

This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page.

== IG-ST-1 New Site to GPO IG topology ==

The NYSERNet site advertises the following stitching details:
{{{
  <stitching lastUpdateTime="2013-11-19T15:44:19Z" xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/">
    <aggregate id="urn:publicid:IDN+instageni.nysernet.org+authority+cm" url="https://www.instageni.nysernet.org:12369/protogeni/xmlrpc/am">      
      <aggregatetype>        protogeni      </aggregatetype>
      <stitchingmode>        chainANDTree      </stitchingmode>
      <scheduledservices>        false      </scheduledservices>
      <negotiatedservices>        false      </negotiatedservices>
      <lifetime id="life">
            <start type="time">          2013-11-19T15:44:19Z        </start>
            <end type="time">          2013-11-19T15:44:19Z        </end>
      </lifetime>
      <node id="urn:publicid:IDN+instageni.nysernet.org+node+procurve2">
          <port id="urn:publicid:IDN+instageni.nysernet.org+stitchport+procurve2:1.19">
              <capacity>            1000000          </capacity>
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>
              <granularity>            1          </granularity>
              <link id="urn:publicid:IDN+instageni.nysernet.org+interface+procurve2:1.19">
                  <remoteLinkId>              urn:publicid:IDN+ion.internet2.edu+interface+rtr.newy:xe-0/2/0:nysernet-ig            </remoteLinkId>
                  <trafficEngineeringMetric>              10            </trafficEngineeringMetric>
                  <capacity>              1000000            </capacity>
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>
                  <granularity>              1            </granularity>
                  <switchingCapabilityDescriptor>
                      <switchingcapType>                l2sc              </switchingcapType>
                      <encodingType>                ethernet              </encodingType>
                      <switchingCapabilitySpecificInfo>
                         <switchingCapabilitySpecificInfo_L2sc>
                            <interfaceMTU>                    9000                  </interfaceMTU>
                            <vlanRangeAvailability>                    1700-1719                  </vlanRangeAvailability>
                            <vlanTranslation>                    false                  </vlanTranslation>
                         </switchingCapabilitySpecificInfo_L2sc>
                      </switchingCapabilitySpecificInfo>
                  </switchingCapabilityDescriptor>
              </link>
          </port>
      </node>
    </aggregate>
  </stitching>
}}}

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be  requested. 

Create a slice and then create the stitched slivers with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/NYSERNet/IG-ST-1-ion.rspec IG-ST-1-ion.rspec]:
{{{
$ omni.py createslice IG-ST-1
11:07:47 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
11:07:47 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
11:07:47 INFO     omni: Using control framework portal
11:07:48 INFO     omni: Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1, Expiration 2013-11-26 15:43:01
11:07:48 INFO     omni:  ------------------------------------------------------------
11:07:48 INFO     omni:  Completed createslice:
Args: createslice IG-ST-1

  Result Summary: Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1, Expiration 2013-11-26 15:43:01
 
11:07:48 INFO     omni:  ============================================================
lnevers@sendaria:~/gcf-2.4.1/stitch-test/NYSERNET$ stitcher.py createsliver IG-ST-1 IG-ST-1-ion.rspec -o
11:07:56 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
11:07:56 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
11:07:56 INFO     stitcher: Using control framework portal
11:07:56 INFO     stitcher: Checking that slice IG-ST-1 is valid...
11:07:57 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1 expires on 2013-11-26 15:43:01 UTC
11:07:58 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> speaks AM API v3, but sticking with v2
11:07:58 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
11:07:58 INFO     stitcher: Stitched reservation will include resources from these aggregates:
11:07:58 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm>
11:07:58 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
11:07:58 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
11:07:58 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-nysernet-org.xml'
11:07:58 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.nysernet.org:12369/protogeni/xmlrpc/am
11:08:14 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> complete.
11:08:14 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-gpolab-bbn-com.xml'
11:08:14 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
11:08:31 ERROR    omni:  {'output': "vlan tag 3729 for 'link' not available", 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+c5af8f2b44192f10c58801d205aeb88c', 'am_type': 'protogeni', 'geni_code': 1, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=c5af8f2b44192f10c58801d205aeb88c'}, 'value': 0}
11:08:31 INFO     stitch.Aggregate: Got AMAPIError doing createsliver IG-ST-1 at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag 3729 for 'link' not available.
11:08:31 INFO     stitch.launcher: Will put <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> back in the pool to allocate. Got Retry <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> 2th time with <Hop u'urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24' on path u'link'> new suggested 3732 (not 3729)
11:08:31 INFO     stitch.launcher: Pausing for 30 seconds for Aggregates to free up resources...


11:09:01 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-12-instageni-gpolab-bbn-com.xml'
11:09:01 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
11:09:20 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
11:09:20 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-ion-internet2-edu.xml'
11:09:20 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
11:10:03 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
11:10:03 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
11:10:40 INFO     stitch.Aggregate: DCN circuit 49711 is ready
11:10:47 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
11:10:47 INFO     stitch.launcher: All aggregates are complete.
11:10:47 INFO     stitcher: Writing to 'IG-ST-1-manifest-rspec-stitching-combined.xml'
11:10:47 INFO     stitcher: Saved combined reservation RSpec at 3 AMs to file IG-ST-1-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 link(s).
}}}

Determined login information at each NYSERNet and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-1 -a nysernet-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.nysernet.org:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-nyse's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-nyse using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.nysernet.org

$ readyToLogin.py IG-ST-1 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-gpo using:
	ssh -p 38458  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com
}}}

=== Measurements ===

'''Iperf InstaGENI GPO VM to NYSERNet VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2013-11-19''

__One Client_
{{{
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec   532 MBytes  74.3 Mbits/sec
}}}

__Five Clients__
{{{
[  4]  0.0-60.1 sec   143 MBytes  20.0 Mbits/sec
[  8]  0.0-60.1 sec   142 MBytes  19.9 Mbits/sec
[  5]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec
[  6]  0.0-60.2 sec   142 MBytes  19.8 Mbits/sec
[  7]  0.0-60.2 sec   146 MBytes  20.3 Mbits/sec
[SUM]  0.0-60.2 sec   713 MBytes  99.4 Mbits/sec
}}}

__Ten Clients__
{{{
[ 14]  0.0-60.2 sec  72.0 MBytes  10.0 Mbits/sec
[ 13]  0.0-60.3 sec  70.4 MBytes  9.80 Mbits/sec
[ 12]  0.0-60.3 sec  73.8 MBytes  10.3 Mbits/sec
[ 11]  0.0-60.3 sec  70.5 MBytes  9.80 Mbits/sec
[  5]  0.0-60.3 sec  73.1 MBytes  10.2 Mbits/sec
[  9]  0.0-60.3 sec  74.4 MBytes  10.3 Mbits/sec
[ 10]  0.0-60.4 sec  72.8 MBytes  10.1 Mbits/sec
[ 15]  0.0-60.4 sec  65.4 MBytes  9.09 Mbits/sec
[  8]  0.0-60.4 sec  70.8 MBytes  9.83 Mbits/sec
[  4]  0.0-60.4 sec  72.8 MBytes  10.1 Mbits/sec
[SUM]  0.0-60.4 sec   716 MBytes  99.4 Mbits/sec

}}}

'''Iperf InstaGENI GPO VM to GPO VM (UDP)
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  1.03 GBytes   148 Mbits/sec
[  3] Sent 752689 datagrams
[  3] Server Report:
[  3]  0.0-61.6 sec   691 MBytes  94.1 Mbits/sec   0.076 ms 259714/752688 (35%)
[  3]  0.0-61.6 sec  1 datagrams received out-of-order
}}}

'''Ping from InstaGENI GPO VM to the GPO VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59097ms
rtt min/avg/max/mdev = 11.429/11.691/18.220/0.916 ms
}}}


'''Iperf InstaGENI NYSERNet VM to GPO VM (TCP) - TCP window size: 23.5 KByte (default)

''Collected: 2013-11-19''

__One Client_
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   510 MBytes  71.3 Mbits/sec
}}}

__Five Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec   251 MBytes  35.1 Mbits/sec
[  3]  0.0-60.1 sec   117 MBytes  16.4 Mbits/sec
[  6]  0.0-60.1 sec   111 MBytes  15.5 Mbits/sec
[  7]  0.0-60.1 sec   114 MBytes  15.9 Mbits/sec
[  4]  0.0-60.1 sec   114 MBytes  15.9 Mbits/sec
[SUM]  0.0-60.1 sec   708 MBytes  98.8 Mbits/sec
}}}

__Ten Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.1 sec   110 MBytes  15.3 Mbits/sec
[  3]  0.0-60.1 sec   119 MBytes  16.6 Mbits/sec
[  7]  0.0-60.1 sec   114 MBytes  16.0 Mbits/sec
[  5]  0.0-60.1 sec  55.5 MBytes  7.74 Mbits/sec
[  9]  0.0-60.2 sec  47.0 MBytes  6.55 Mbits/sec
[  8]  0.0-60.2 sec  56.2 MBytes  7.84 Mbits/sec
[  4]  0.0-60.2 sec  49.9 MBytes  6.95 Mbits/sec
[ 10]  0.0-60.2 sec  49.2 MBytes  6.86 Mbits/sec
[ 11]  0.0-60.2 sec  49.1 MBytes  6.84 Mbits/sec
[ 12]  0.0-60.2 sec  58.2 MBytes  8.11 Mbits/sec
[SUM]  0.0-60.2 sec   708 MBytes  98.7 Mbits/sec

}}}

'''Iperf InstaGENI NYSERNet VM to GPO VM (UDP) - UDP buffer size:  224 KByte (default) '''
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512756 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   691 MBytes  96.5 Mbits/sec   0.100 ms 19526/512755 (3.8%)
[  3]  0.0-60.1 sec  7 datagrams received out-of-order
}}}

'''Ping from InstaGENI NYSERNet VM to GPO VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59098ms
rtt min/avg/max/mdev = 11.439/11.550/11.894/0.102 ms
}}}

== IG-ST-2 New Site to GPO IG Loop topology ==
Create a slice and then create the stitched slivers with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/NYSERNet/IG-ST-2.rspec IG-ST-2.rspec]:
{{{
$ omni.py createslice IG-ST-2
12:32:58 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
12:32:58 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
12:32:58 INFO     omni: Using control framework portal
12:33:00 INFO     omni: Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2, Expiration 2013-11-26 17:32:59
12:33:00 INFO     omni:  ------------------------------------------------------------
12:33:00 INFO     omni:  Completed createslice:
Args: createslice IG-ST-2

  Result Summary: Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2, Expiration 2013-11-26 17:32:59
 
12:33:00 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
12:33:05 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
12:33:05 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
12:33:05 INFO     stitcher: Using control framework portal
12:33:05 INFO     stitcher: Checking that slice IG-ST-2 is valid...
12:33:06 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2 expires on 2013-11-26 17:32:59 UTC
12:33:07 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> speaks AM API v3, but sticking with v2
12:33:07 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
12:33:07 INFO     stitcher: Stitched reservation will include resources from these aggregates:
12:33:07 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm>
12:33:07 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
12:33:07 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
12:33:07 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-nysernet-org.xml'
12:33:07 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.nysernet.org:12369/protogeni/xmlrpc/am
12:33:28 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> complete.
12:33:28 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-gpolab-bbn-com.xml'
12:33:28 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
12:33:46 ERROR    omni:  {'output': "vlan tag 3726 for 'link' not available", 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+81a5a1f64b6967381d9ead809ff3aa0d', 'am_type': 'protogeni', 'geni_code': 1, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=81a5a1f64b6967381d9ead809ff3aa0d'}, 'value': 0}
12:33:46 INFO     stitch.Aggregate: Got AMAPIError doing createsliver IG-ST-2 at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag 3726 for 'link' not available.
12:33:46 INFO     stitch.launcher: Will put <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> back in the pool to allocate. Got Retry <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> 2th time with <Hop u'urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24' on path u'link'> new suggested 3748 (not 3726)
12:33:46 INFO     stitch.launcher: Pausing for 30 seconds for Aggregates to free up resources...


12:34:16 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-12-instageni-gpolab-bbn-com.xml'
12:34:16 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
12:34:31 ERROR    omni:  {'output': "vlan tag 3748 for 'link' not available", 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+1ba8600b42cdd6d7b8d17fc00f19e262', 'am_type': 'protogeni', 'geni_code': 1, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=1ba8600b42cdd6d7b8d17fc00f19e262'}, 'value': 0}
12:34:31 INFO     stitch.Aggregate: Got AMAPIError doing createsliver IG-ST-2 at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag 3748 for 'link' not available.
12:34:31 INFO     stitch.launcher: Will put <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> back in the pool to allocate. Got Retry <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> 3th time with <Hop u'urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24' on path u'link'> new suggested 3749 (not 3748)
12:34:31 INFO     stitch.launcher: Pausing for 30 seconds for Aggregates to free up resources...


12:35:01 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-13-instageni-gpolab-bbn-com.xml'
12:35:01 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
12:35:19 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
12:35:19 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-ion-internet2-edu.xml'
12:35:19 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
12:36:03 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
12:36:03 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:36:40 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:37:17 INFO     stitch.Aggregate: DCN circuit 49741 is ready
12:37:17 INFO     stitch.Aggregate: DCN circuit 49731 is ready
12:37:24 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
12:37:24 INFO     stitch.launcher: All aggregates are complete.
12:37:24 INFO     stitcher: Writing to 'IG-ST-2-manifest-rspec-stitching-combined.xml'
12:37:24 INFO     stitcher: Saved combined reservation RSpec at 3 AMs to file IG-ST-2-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 link(s).
}}}

Determined login information at each NYSERNet and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-2 -a nysernet-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.nysernet.org:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-nyse's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-nyse using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.nysernet.org

$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-gpo using:
	ssh -p 38458  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com
}}}

Login to each host and ping the remote on each of the two interfaces.  Below is the ping output for the GPO site:
{{{
[lnevers@ig-gpo ~]$ ping 10.10.4.2 -c 5
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.
64 bytes from 10.10.4.2: icmp_req=1 ttl=64 time=23.4 ms
64 bytes from 10.10.4.2: icmp_req=2 ttl=64 time=11.2 ms
64 bytes from 10.10.4.2: icmp_req=3 ttl=64 time=11.2 ms
64 bytes from 10.10.4.2: icmp_req=4 ttl=64 time=11.2 ms
64 bytes from 10.10.4.2: icmp_req=5 ttl=64 time=11.3 ms

--- 10.10.4.2 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 11.226/13.710/23.404/4.847 ms
[lnevers@ig-gpo ~]$ ping 192.168.4.2 -c 5
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.
64 bytes from 192.168.4.2: icmp_req=1 ttl=64 time=23.5 ms
64 bytes from 192.168.4.2: icmp_req=2 ttl=64 time=11.2 ms
64 bytes from 192.168.4.2: icmp_req=3 ttl=64 time=11.2 ms
64 bytes from 192.168.4.2: icmp_req=4 ttl=64 time=11.2 ms
64 bytes from 192.168.4.2: icmp_req=5 ttl=64 time=11.2 ms

--- 192.168.4.2 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 11.210/13.718/23.522/4.902 ms
[lnevers@ig-gpo ~]$ 

}}}

== IG-ST-3 New Site 3 node linear topology ==

Create a slice and then create the stitched slivers with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/NYSERNet/IG-ST-3.rspec IG-ST-3.rspec]:
{{{
$ omni.py createslice IG-ST-3
08:34:37 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
08:34:37 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
08:34:37 INFO     omni: Using control framework portal
08:34:38 INFO     omni: Created slice with Name IG-ST-3, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3, Expiration 2013-11-26 17:40:19
08:34:38 INFO     omni:  ------------------------------------------------------------
08:34:38 INFO     omni:  Completed createslice:
Args: createslice IG-ST-3

  Result Summary: Created slice with Name IG-ST-3, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3, Expiration 2013-11-26 17:40:19
 
08:34:38 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
08:34:58 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
08:34:58 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
08:34:58 INFO     stitcher: Using control framework portal
08:34:58 INFO     stitcher: Checking that slice IG-ST-3 is valid...
08:34:59 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3 expires on 2013-11-26 17:40:19 UTC
08:35:00 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> speaks AM API v3, but sticking with v2
08:35:00 INFO     stitcher: <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> speaks AM API v3, but sticking with v2
08:35:01 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
08:35:01 INFO     stitcher: <Aggregate urn:publicid:IDN+emulab.net+authority+cm> speaks AM API v3, but sticking with v2
08:35:01 INFO     stitcher: Stitched reservation will include resources from these aggregates:
08:35:01 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm>
08:35:01 INFO     stitcher: 	<Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm>
08:35:01 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
08:35:01 INFO     stitcher: 	<Aggregate urn:publicid:IDN+emulab.net+authority+cm>
08:35:01 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
08:35:01 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-instageni-nysernet-org.xml'
08:35:01 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.nysernet.org:12369/protogeni/xmlrpc/am
08:35:19 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> complete.
08:35:19 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-instageni-gpolab-bbn-com.xml'
08:35:19 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
08:35:37 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
08:35:37 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-emulab-net.xml'
08:35:37 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.emulab.net:12369/protogeni/xmlrpc/am
08:36:30 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+emulab.net+authority+cm> complete.
08:36:30 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-utah-geniracks-net.xml'
08:36:30 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
08:36:44 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> complete.
08:36:44 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-ion-internet2-edu.xml'
08:36:44 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
08:37:28 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
08:37:28 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
08:38:05 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
08:38:41 INFO     stitch.Aggregate: DCN circuit 50011 is ready
08:38:41 INFO     stitch.Aggregate: DCN circuit 50001 is ready
08:38:48 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
08:38:48 INFO     stitch.launcher: All aggregates are complete.
08:38:48 INFO     stitcher: Writing to 'IG-ST-3-manifest-rspec-stitching-combined.xml'
08:38:48 INFO     stitcher: Saved combined reservation RSpec at 5 AMs to file IG-ST-3-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 link(s).
}}}

Determined login information the NYSERNet host:
{{{
================================================================================
LOGIN INFO for AM: https://instageni.nysernet.org:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

nyse's geni_status is: ready (am_status:ready) 
User lnevers logs in to nyse using:
	ssh -p 33850  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.nysernet.org

}}}
Login to the NYSERNet host and ping each remote: 
{{{
#ping GPO IG 
[lnevers@nyse ~]$  ping 192.168.2.1 -c 5
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=22.7 ms
64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=11.2 ms
64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=11.2 ms
64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=11.2 ms
64 bytes from 192.168.2.1: icmp_req=5 ttl=64 time=11.2 ms

--- 192.168.2.1 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4006ms
rtt min/avg/max/mdev = 11.226/13.543/22.728/4.593 ms

# Utah IG
[lnevers@nyse ~]$ ping 192.168.4.1 -c 5
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.
64 bytes from 192.168.4.1: icmp_req=1 ttl=64 time=82.6 ms
64 bytes from 192.168.4.1: icmp_req=2 ttl=64 time=82.8 ms
64 bytes from 192.168.4.1: icmp_req=3 ttl=64 time=82.6 ms
64 bytes from 192.168.4.1: icmp_req=4 ttl=64 time=82.7 ms
64 bytes from 192.168.4.1: icmp_req=5 ttl=64 time=82.7 ms

--- 192.168.4.1 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4007ms
rtt min/avg/max/mdev = 82.627/82.725/82.812/0.324 ms
}}}


== IG-ST-4 New Site to GPO EG interoperability ==
Create a slice and then create the stitched slivers with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/NYSERNet/IG-ST-4.rspec IG-ST-4.rspec]:
{{{
$ omni.py createslice IG-ST-4
13:29:53 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
13:29:53 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
13:29:53 INFO     omni: Using control framework portal
13:29:55 INFO     omni: Created slice with Name IG-ST-4, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-4, Expiration 2013-11-26 18:29:54
13:29:55 INFO     omni:  ------------------------------------------------------------
13:29:55 INFO     omni:  Completed createslice:
Args: createslice IG-ST-4

  Result Summary: Created slice with Name IG-ST-4, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-4, Expiration 2013-11-26 18:29:54
 
13:29:55 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o
13:30:14 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
13:30:14 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
13:30:14 INFO     stitcher: Using control framework portal
13:30:15 INFO     stitcher: Checking that slice IG-ST-4 is valid...
13:30:16 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-4 expires on 2013-11-26 18:29:54 UTC
13:30:16 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> speaks AM API v3, but sticking with v2
13:30:17 INFO     stitcher: Stitched reservation will include resources from these aggregates:
13:30:17 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm>
13:30:17 INFO     stitcher: 	<Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>
13:30:17 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
13:30:17 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-instageni-nysernet-org.xml'
13:30:17 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.nysernet.org:12369/protogeni/xmlrpc/am
13:30:31 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.nysernet.org+authority+cm> complete.
13:30:31 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-exogeni-net-bbnvmsite.xml'
13:30:31 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni.renci.org:11443/orca/xmlrpc
13:30:38 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnvmsite+interface+Bbn:ExoGeni:TenGigabitEthernet:1:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
13:30:38 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3739
13:30:38 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:GigabitEthernet:1:2:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
13:30:38 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3739
13:30:38 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:TenGigabitEthernet:1:1:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
13:30:38 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3739
13:30:38 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am> complete.
13:30:38 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-ion-internet2-edu.xml'
13:30:38 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
13:31:22 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
13:31:22 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:31:59 INFO     stitch.Aggregate: DCN circuit 49791 is ready
13:32:06 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
13:32:06 INFO     stitch.launcher: All aggregates are complete.
13:32:06 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnvmsite+interface+Bbn:ExoGeni:TenGigabitEthernet:1:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
13:32:06 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:GigabitEthernet:1:2:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
13:32:06 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:TenGigabitEthernet:1:1:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
13:32:06 ERROR    stitcher: Manifest RSpec file did not contain a Manifest RSpec (wrong type or schema)
13:32:06 INFO     stitcher: Writing to 'IG-ST-4-manifest-rspec-stitching-combined.xml'
13:32:06 INFO     stitcher: Saved combined reservation RSpec at 3 AMs to file IG-ST-4-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 link(s).
}}}

Determined login information at each NYSERNet and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-4 -a nysernet-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.nysernet.org:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-nyse's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-nyse using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.nysernet.org
$ readyToLogin.py IG-ST-4 -a eg-sm
  ....
================================================================================
LOGIN INFO for AM: https://geni.renci.org:11443/orca/xmlrpc
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

eg-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.19
}}}

Login to each node and ping the remote on each of the two interfaces.  Below is the ping output for the GPO EG site:
{{{
lnevers@eg-gpo:~$ ping 192.168.1.2 -c 5
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
64 bytes from 192.168.1.2: icmp_req=1 ttl=64 time=34.2 ms
64 bytes from 192.168.1.2: icmp_req=2 ttl=64 time=11.4 ms
64 bytes from 192.168.1.2: icmp_req=3 ttl=64 time=11.4 ms
64 bytes from 192.168.1.2: icmp_req=4 ttl=64 time=11.4 ms
64 bytes from 192.168.1.2: icmp_req=5 ttl=64 time=11.4 ms

--- 192.168.1.2 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4006ms
rtt min/avg/max/mdev = 11.420/16.015/34.245/9.116 ms
lnevers@eg-gpo:~$ 

}}}
== IG-ST-5 Site Information ==


----
{{{
#!html
Email <a href="mailto:help@geni.net"> help@geni.net </a> for GENI support or email <a href="mailto:luisa.nevers@bbn.com">me</a> with feedback on this page!
}}}