wiki:GeniNetworkStitchingConfirmationTestStatus/MAX

Version 6 (modified by lnevers@bbn.com, 6 years ago) (diff)

--

MAX Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The NYSERNet site advertises the following stitching details:

  <stitching lastUpdateTime="2013-12-03T17:43:35Z" xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/">    
    <aggregate id="urn:publicid:IDN+instageni.maxgigapop.net+authority+cm" url="https://www.instageni.maxgigapop.net:12369/protogeni/xmlrpc/am">      
      <aggregatetype>        protogeni      </aggregatetype>      
      <stitchingmode>        chainANDTree      </stitchingmode>      
      <scheduledservices>        false      </scheduledservices>      
      <negotiatedservices>        false      </negotiatedservices>      
      <lifetime id="life">        
            <start type="time">          2013-12-03T17:43:35Z        </start>        
            <end type="time">          2013-12-03T17:43:35Z        </end>        
      </lifetime>      
      <node id="urn:publicid:IDN+instageni.maxgigapop.net+node+procurve2">        
          <port id="urn:publicid:IDN+instageni.maxgigapop.net+stitchport+procurve2:1.22">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <granularity>            1          </granularity>          
              <link id="urn:publicid:IDN+instageni.maxgigapop.net+interface+procurve2:1.22">            
                  <remoteLinkId> urn:publicid:IDN+dragon.maxgigapop.net+interface+clpk:1-1-2:*   </remoteLinkId>            
                  <trafficEngineeringMetric>              10            </trafficEngineeringMetric>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                  <granularity>              1            </granularity>            
                  <switchingCapabilityDescriptor>              
                      <switchingcapType>                l2sc              </switchingcapType>              
                      <encodingType>                ethernet              </encodingType>              
                      <switchingCapabilitySpecificInfo>                
                         <switchingCapabilitySpecificInfo_L2sc>                  
                            <interfaceMTU>                    9000                  </interfaceMTU>                  
                            <vlanRangeAvailability> 550-569,3020-3030,3100-3109,3200-3219  </vlanRangeAvailability>                  
                            <vlanTranslation>                    false                  </vlanTranslation>                 
                         </switchingCapabilitySpecificInfo_L2sc>                
                      </switchingCapabilitySpecificInfo>              
                  </switchingCapabilityDescriptor>            
              </link>          
          </port>        
      </node>      
    </aggregate>    
  </stitching>  

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSPec IG-ST-1-ion.rspec:

$ omni.py createslice IG-ST-1
12:46:48 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
12:46:48 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
12:46:48 INFO     omni: Using control framework portal
12:46:50 INFO     omni: Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1, Expiration 2013-12-10 17:46:49
12:46:50 INFO     omni:  ------------------------------------------------------------
12:46:50 INFO     omni:  Completed createslice:
Args: createslice IG-ST-1
  Result Summary: Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1, Expiration 2013-12-10 17:46:49
12:46:50 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-1 IG-ST-1-ion.rspec -o
12:47:19 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
12:47:19 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
12:47:19 INFO     stitcher: Using control framework portal
12:47:20 INFO     stitcher: Checking that slice IG-ST-1 is valid...
12:47:21 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1 expires on 2013-12-10 17:46:49 UTC
12:47:22 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
12:47:22 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> speaks AM API v3, but sticking with v2
12:47:22 INFO     stitcher: Stitched reservation will include resources from these aggregates:
12:47:22 INFO     stitcher: 	<Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>
12:47:22 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
12:47:22 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm>
12:47:22 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
12:47:22 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-dragon-maxgigapop-net.xml'
12:47:22 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://max-myplc.dragon.maxgigapop.net:12346
12:48:08 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>: must wait for status ready....
12:48:08 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:48:45 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:49:22 INFO     stitch.Aggregate: DCN circuit 2831 is ready
12:49:30 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am> complete.
12:49:30 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-gpolab-bbn-com.xml'
12:49:30 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
12:49:45 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
12:49:45 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-maxgigapop-net.xml'
12:49:45 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.maxgigapop.net:12369/protogeni/xmlrpc/am
12:50:00 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> complete.
12:50:00 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-ion-internet2-edu.xml'
12:50:00 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
12:50:43 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
12:50:43 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:51:20 INFO     stitch.Aggregate: DCN circuit 52451 is ready
12:51:27 WARNING  stitch.Aggregate: Changing Path link global ID from dragon.maxgigapop.net-2831 to ion.internet2.edu-52451
12:51:27 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
12:51:27 INFO     stitch.launcher: All aggregates are complete.
12:51:27 INFO     stitcher: Writing to 'IG-ST-1-manifest-rspec-stitching-combined.xml'
12:51:27 INFO     stitcher: Saved combined reservation RSpec at 4 AMs to file IG-ST-1-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 link(s).

Note: Ticket 1157 was written for the AM URL max-myplc.

Determined login information at each NYSERNet and GPO aggregate:

$ readyToLogin.py IG-ST-1 -a max-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.maxgigapop.net:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-max's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-max using:
	ssh -p 35642  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.maxgigapop.net
$ readyToLogin.py IG-ST-1 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-gpo using:
	ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI MAX VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2013-12-03

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   507 MBytes  70.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   143 MBytes  20.0 Mbits/sec
[  6]  0.0-60.1 sec   141 MBytes  19.7 Mbits/sec
[  5]  0.0-60.1 sec   140 MBytes  19.5 Mbits/sec
[  7]  0.0-60.1 sec   148 MBytes  20.6 Mbits/sec
[  4]  0.0-60.1 sec   140 MBytes  19.5 Mbits/sec
[SUM]  0.0-60.1 sec   711 MBytes  99.2 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 11]  0.0-60.1 sec  73.0 MBytes  10.2 Mbits/sec
[  6]  0.0-60.1 sec  69.0 MBytes  9.63 Mbits/sec
[  9]  0.0-60.1 sec  70.8 MBytes  9.87 Mbits/sec
[ 10]  0.0-60.1 sec  69.6 MBytes  9.71 Mbits/sec
[  5]  0.0-60.1 sec  70.9 MBytes  9.89 Mbits/sec
[  3]  0.0-60.1 sec  72.1 MBytes  10.1 Mbits/sec
[ 12]  0.0-60.2 sec  72.6 MBytes  10.1 Mbits/sec
[  4]  0.0-60.2 sec  72.5 MBytes  10.1 Mbits/sec
[  8]  0.0-60.2 sec  73.6 MBytes  10.3 Mbits/sec
[  7]  0.0-60.3 sec  71.0 MBytes  9.88 Mbits/sec
[SUM]  0.0-60.3 sec   715 MBytes  99.5 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI MAX VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512818 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   676 MBytes  94.3 Mbits/sec   0.128 ms 30967/512817 (6%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI MAX VM

60 packets transmitted, 60 received, 0% packet loss, time 59098ms
rtt min/avg/max/mdev = 11.731/12.034/13.842/0.347 ms

Iperf InstaGENI MAX VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2013-12-03

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   485 MBytes  67.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.1 sec   142 MBytes  19.9 Mbits/sec
[  3]  0.0-60.1 sec   126 MBytes  17.6 Mbits/sec
[  4]  0.0-60.1 sec   150 MBytes  20.9 Mbits/sec
[  7]  0.0-60.1 sec   142 MBytes  19.9 Mbits/sec
[  5]  0.0-60.1 sec   139 MBytes  19.5 Mbits/sec
[SUM]  0.0-60.1 sec   700 MBytes  97.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 11]  0.0-60.1 sec  63.9 MBytes  8.92 Mbits/sec
[  8]  0.0-60.1 sec  64.5 MBytes  9.01 Mbits/sec
[  4]  0.0-60.1 sec  64.2 MBytes  8.97 Mbits/sec
[ 12]  0.0-60.1 sec  65.4 MBytes  9.12 Mbits/sec
[  6]  0.0-60.1 sec  62.4 MBytes  8.70 Mbits/sec
[ 10]  0.0-60.2 sec  66.1 MBytes  9.22 Mbits/sec
[  5]  0.0-60.2 sec  60.0 MBytes  8.36 Mbits/sec
[  3]  0.0-60.2 sec  61.1 MBytes  8.52 Mbits/sec
[  7]  0.0-60.2 sec  52.6 MBytes  7.33 Mbits/sec
[  9]  0.0-60.2 sec  65.0 MBytes  9.05 Mbits/sec
[SUM]  0.0-60.2 sec   625 MBytes  87.1 Mbits/sec

Iperf InstaGENI MAX VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   100 Mbits/sec
[  3] Sent 512622 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   683 MBytes  95.4 Mbits/sec   0.102 ms 25145/512621 (4.9%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from InstaGENI MAX VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59097ms
rtt min/avg/max/mdev = 11.767/12.090/16.168/0.596 ms

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSPec IG-ST-2.rspec:

$ omni.py createslice IG-ST-2
13:19:49 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
13:19:49 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
13:19:49 INFO     omni: Using control framework portal
13:19:51 INFO     omni: Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2, Expiration 2013-12-10 18:19:50
13:19:51 INFO     omni:  ------------------------------------------------------------
13:19:51 INFO     omni:  Completed createslice:
Args: createslice IG-ST-2

  Result Summary: Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2, Expiration 2013-12-10 18:19:50
 
13:19:51 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
13:20:03 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
13:20:03 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
13:20:03 INFO     stitcher: Using control framework portal
13:20:04 INFO     stitcher: Checking that slice IG-ST-2 is valid...
13:20:05 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2 expires on 2013-12-10 18:19:50 UTC
13:20:06 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
13:20:06 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> speaks AM API v3, but sticking with v2
13:20:17 ERROR    omni.pgch: Call for Test PG AM for GENI API compatibilitity at https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0 failed.: Unknown SSL error The read operation timed out
13:20:17 ERROR    omni.pgch:     ..... Run with --debug for more information
13:20:39 ERROR    stitcher: RSpec requires AM urn:publicid:IDN+instageni.max.edu+authority+cm which is not in workflow and URL is unknown!
13:20:39 INFO     stitcher: Stitched reservation will include resources from these aggregates:
13:20:39 INFO     stitcher: 	<Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>
13:20:39 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
13:20:39 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm>
13:20:39 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
13:20:39 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-dragon-maxgigapop-net.xml'
13:20:39 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://max-myplc.dragon.maxgigapop.net:12346
13:21:25 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>: must wait for status ready....
13:21:25 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:22:02 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:22:40 INFO     stitch.Aggregate: DCN circuit 2833 is ready
13:22:40 INFO     stitch.Aggregate: DCN circuit 2832 is ready
13:22:47 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am> complete.
13:22:47 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-gpolab-bbn-com.xml'
13:22:47 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
13:23:03 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
13:23:03 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-maxgigapop-net.xml'
13:23:03 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.maxgigapop.net:12369/protogeni/xmlrpc/am
13:23:18 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> complete.
13:23:18 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-ion-internet2-edu.xml'
13:23:18 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
13:24:01 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
13:24:01 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:24:38 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:25:15 INFO     stitch.Aggregate: DCN circuit 52461 is ready
13:25:15 INFO     stitch.Aggregate: DCN circuit 52471 is ready
13:25:22 WARNING  stitch.Aggregate: Changing Path link1 global ID from dragon.maxgigapop.net-2833 to ion.internet2.edu-52471
13:25:22 WARNING  stitch.Aggregate: Changing Path link global ID from dragon.maxgigapop.net-2832 to ion.internet2.edu-52461
13:25:22 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
13:25:22 INFO     stitch.launcher: All aggregates are complete.
13:25:22 INFO     stitcher: Writing to 'IG-ST-2-manifest-rspec-stitching-combined.xml'
13:25:22 INFO     stitcher: Saved combined reservation RSpec at 4 AMs to file IG-ST-2-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 link(s).

Determined login information at each MAX and GPO aggregate:

$ readyToLogin.py IG-ST-2 -a max-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.maxgigapop.net:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-max's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-max using:
	ssh -p 35642  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.maxgigapop.net

$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-gpo using:
	ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com

Login to each host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

60 packets transmitted, 60 received, 0% packet loss, time 59104ms
rtt min/avg/max/mdev = 11.545/11.896/24.277/1.620 ms

IG-ST-3 IG-ST-3 New Site 3 node linear topology

IG-ST-4 New Site to GPO EG interoperability

IG-ST-5 Site Information