wiki:GeniNetworkStitchingConfirmationTestStatus/MAX

MAX Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The NYSERNet site advertises the following stitching details:

<stitching lastUpdateTime="2013-12-03T17:43:35Z" xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/">    
  <aggregate id="urn:publicid:IDN+instageni.maxgigapop.net+authority+cm" url="https://www.instageni.maxgigapop.net:12369/protogenixmlrpc/am">      
     <aggregatetype>        protogeni      </aggregatetype>      
     <stitchingmode>        chainANDTree      </stitchingmode>      
     <scheduledservices>        false      </scheduledservices>      
     <negotiatedservices>        false      </negotiatedservices>      
     <lifetime id="life">        
           <start type="time">          2013-12-03T17:43:35Z        </start>        
           <end type="time">          2013-12-03T17:43:35Z        </end>        
     </lifetime>      
     <node id="urn:publicid:IDN+instageni.maxgigapop.net+node+procurve2">        
       <port id="urn:publicid:IDN+instageni.maxgigapop.net+stitchport+procurve2:1.22">          
           <capacity>            1000000          </capacity>          
           <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
           <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
           <granularity>            1          </granularity>          
           <link id="urn:publicid:IDN+instageni.maxgigapop.net+interface+procurve2:1.22">            
               <remoteLinkId> urn:publicid:IDN+dragon.maxgigapop.net+interface+clpk:1-1-2:*   </remoteLinkId>            
               <trafficEngineeringMetric>              10            </trafficEngineeringMetric>            
               <capacity>              1000000            </capacity>            
               <maximumReservableCapacity>              1000000            </maximumReservableCapacity>            
               <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
               <granularity>              1            </granularity>            
               <switchingCapabilityDescriptor>              
                   <switchingcapType>                l2sc              </switchingcapType>              
                   <encodingType>                ethernet              </encodingType>              
                   <switchingCapabilitySpecificInfo>                
                      <switchingCapabilitySpecificInfo_L2sc>                  
                         <interfaceMTU>                    9000                  </interfaceMTU>                  
                         <vlanRangeAvailability> 550-569,3020-3030,3100-3109,3200-3219  </vlanRangeAvailability>                  
                         <vlanTranslation>                    false                  </vlanTranslation>                 
                      </switchingCapabilitySpecificInfo_L2sc>                
                   </switchingCapabilitySpecificInfo>              
               </switchingCapabilityDescriptor>            
           </link>          
       </port>        
    </node>      
  </aggregate>    
</stitching>  

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSPec IG-ST-1-ion.rspec:

$ omni.py createslice IG-ST-1
12:46:48 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
12:46:48 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
12:46:48 INFO     omni: Using control framework portal
12:46:50 INFO     omni: Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1, Expiration 2013-12-10 17:46:49
12:46:50 INFO     omni:  ------------------------------------------------------------
12:46:50 INFO     omni:  Completed createslice:
Args: createslice IG-ST-1
  Result Summary: Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1, Expiration 2013-12-10 17:46:49
12:46:50 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-1 IG-ST-1-ion.rspec -o
12:47:19 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
12:47:19 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
12:47:19 INFO     stitcher: Using control framework portal
12:47:20 INFO     stitcher: Checking that slice IG-ST-1 is valid...
12:47:21 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1 expires on 2013-12-10 17:46:49 UTC
12:47:22 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
12:47:22 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> speaks AM API v3, but sticking with v2
12:47:22 INFO     stitcher: Stitched reservation will include resources from these aggregates:
12:47:22 INFO     stitcher: 	<Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>
12:47:22 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
12:47:22 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm>
12:47:22 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
12:47:22 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-dragon-maxgigapop-net.xml'
12:47:22 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://max-myplc.dragon.maxgigapop.net:12346
12:48:08 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>: must wait for status ready....
12:48:08 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:48:45 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:49:22 INFO     stitch.Aggregate: DCN circuit 2831 is ready
12:49:30 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am> complete.
12:49:30 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-gpolab-bbn-com.xml'
12:49:30 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
12:49:45 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
12:49:45 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-maxgigapop-net.xml'
12:49:45 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.maxgigapop.net:12369/protogeni/xmlrpc/am
12:50:00 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> complete.
12:50:00 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-ion-internet2-edu.xml'
12:50:00 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
12:50:43 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
12:50:43 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:51:20 INFO     stitch.Aggregate: DCN circuit 52451 is ready
12:51:27 WARNING  stitch.Aggregate: Changing Path link global ID from dragon.maxgigapop.net-2831 to ion.internet2.edu-52451
12:51:27 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
12:51:27 INFO     stitch.launcher: All aggregates are complete.
12:51:27 INFO     stitcher: Writing to 'IG-ST-1-manifest-rspec-stitching-combined.xml'
12:51:27 INFO     stitcher: Saved combined reservation RSpec at 4 AMs to file IG-ST-1-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 link(s).

Note: Ticket 1157 was written for the AM URL max-myplc.

Determined login information at each NYSERNet and GPO aggregate:

$ readyToLogin.py IG-ST-1 -a max-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.maxgigapop.net:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-max's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-max using:
	ssh -p 35642  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.maxgigapop.net
$ readyToLogin.py IG-ST-1 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-gpo using:
	ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

Measurements XEN VM

Iperf InstaGENI GPO XEN VM to InstaGENI MAX XEN VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2013-12-03

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   507 MBytes  70.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   143 MBytes  20.0 Mbits/sec
[  6]  0.0-60.1 sec   141 MBytes  19.7 Mbits/sec
[  5]  0.0-60.1 sec   140 MBytes  19.5 Mbits/sec
[  7]  0.0-60.1 sec   148 MBytes  20.6 Mbits/sec
[  4]  0.0-60.1 sec   140 MBytes  19.5 Mbits/sec
[SUM]  0.0-60.1 sec   711 MBytes  99.2 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 11]  0.0-60.1 sec  73.0 MBytes  10.2 Mbits/sec
[  6]  0.0-60.1 sec  69.0 MBytes  9.63 Mbits/sec
[  9]  0.0-60.1 sec  70.8 MBytes  9.87 Mbits/sec
[ 10]  0.0-60.1 sec  69.6 MBytes  9.71 Mbits/sec
[  5]  0.0-60.1 sec  70.9 MBytes  9.89 Mbits/sec
[  3]  0.0-60.1 sec  72.1 MBytes  10.1 Mbits/sec
[ 12]  0.0-60.2 sec  72.6 MBytes  10.1 Mbits/sec
[  4]  0.0-60.2 sec  72.5 MBytes  10.1 Mbits/sec
[  8]  0.0-60.2 sec  73.6 MBytes  10.3 Mbits/sec
[  7]  0.0-60.3 sec  71.0 MBytes  9.88 Mbits/sec
[SUM]  0.0-60.3 sec   715 MBytes  99.5 Mbits/sec

Iperf InstaGENI GPO XEN VM to InstaGENI MAX XEN VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512818 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   676 MBytes  94.3 Mbits/sec   0.128 ms 30967/512817 (6%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO XEN VM to InstaGENI MAX XEN VM

60 packets transmitted, 60 received, 0% packet loss, time 59098ms
rtt min/avg/max/mdev = 11.731/12.034/13.842/0.347 ms

Iperf InstaGENI MAX XEN VM to InstaGENI GPO XEN VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2013-12-03

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   485 MBytes  67.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.1 sec   142 MBytes  19.9 Mbits/sec
[  3]  0.0-60.1 sec   126 MBytes  17.6 Mbits/sec
[  4]  0.0-60.1 sec   150 MBytes  20.9 Mbits/sec
[  7]  0.0-60.1 sec   142 MBytes  19.9 Mbits/sec
[  5]  0.0-60.1 sec   139 MBytes  19.5 Mbits/sec
[SUM]  0.0-60.1 sec   700 MBytes  97.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 11]  0.0-60.1 sec  63.9 MBytes  8.92 Mbits/sec
[  8]  0.0-60.1 sec  64.5 MBytes  9.01 Mbits/sec
[  4]  0.0-60.1 sec  64.2 MBytes  8.97 Mbits/sec
[ 12]  0.0-60.1 sec  65.4 MBytes  9.12 Mbits/sec
[  6]  0.0-60.1 sec  62.4 MBytes  8.70 Mbits/sec
[ 10]  0.0-60.2 sec  66.1 MBytes  9.22 Mbits/sec
[  5]  0.0-60.2 sec  60.0 MBytes  8.36 Mbits/sec
[  3]  0.0-60.2 sec  61.1 MBytes  8.52 Mbits/sec
[  7]  0.0-60.2 sec  52.6 MBytes  7.33 Mbits/sec
[  9]  0.0-60.2 sec  65.0 MBytes  9.05 Mbits/sec
[SUM]  0.0-60.2 sec   625 MBytes  87.1 Mbits/sec

Iperf InstaGENI MAX XEN VM to InstaGENI GPO XEN VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   100 Mbits/sec
[  3] Sent 512622 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   683 MBytes  95.4 Mbits/sec   0.102 ms 25145/512621 (4.9%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from InstaGENI MAX XEN VM to InstaGENI GPO XEN VM

60 packets transmitted, 60 received, 0% packet loss, time 59097ms
rtt min/avg/max/mdev = 11.767/12.090/16.168/0.596 ms

Measurements Raw-PC

Iperf InstaGENI GPO Raw-PC to InstaGENI MAX Raw-PC (TCP) - TCP window size: 16.0 KByte (default)

Collected: 2013-12-05

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   716 MBytes   100 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec   142 MBytes  19.8 Mbits/sec
[  3]  0.0-60.1 sec   154 MBytes  21.5 Mbits/sec
[  5]  0.0-60.1 sec   153 MBytes  21.3 Mbits/sec
[  6]  0.0-60.1 sec   152 MBytes  21.3 Mbits/sec
[  7]  0.0-60.4 sec   121 MBytes  16.8 Mbits/sec
[SUM]  0.0-60.4 sec   722 MBytes   100 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  85.8 MBytes  12.0 Mbits/sec
[  6]  0.0-60.0 sec  57.9 MBytes  8.09 Mbits/sec
[ 10]  0.0-60.0 sec  83.9 MBytes  11.7 Mbits/sec
[ 11]  0.0-60.1 sec  87.6 MBytes  12.2 Mbits/sec
[ 12]  0.0-60.1 sec  83.8 MBytes  11.7 Mbits/sec
[  3]  0.0-60.2 sec  52.6 MBytes  7.33 Mbits/sec
[  7]  0.0-60.3 sec  57.2 MBytes  7.97 Mbits/sec
[  8]  0.0-60.3 sec  78.4 MBytes  10.9 Mbits/sec
[  5]  0.0-60.4 sec  57.8 MBytes  8.02 Mbits/sec
[  9]  0.0-60.7 sec  80.8 MBytes  11.2 Mbits/sec
[SUM]  0.0-60.7 sec   726 MBytes   100 Mbits/sec

Iperf InstaGENI GPO Raw-PC to InstaGENI MAX Raw-PC (UDP) - UDP buffer size: 114 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   701 MBytes  97.9 Mbits/sec   0.091 ms 12478/512820 (2.4%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO Raw-PC to InstaGENI MAX Raw-PC

60 packets transmitted, 60 received, 0% packet loss, time 59111ms
rtt min/avg/max/mdev = 11.558/11.609/11.863/0.056 ms

Iperf InstaGENI MAX Raw-PC to InstaGENI GPO Raw-PC (TCP) - TCP window size: 16.0 KByte (default)

Collected: 2013-12-05

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   717 MBytes   100 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec   158 MBytes  22.1 Mbits/sec
[  5]  0.0-60.0 sec   164 MBytes  22.9 Mbits/sec
[  7]  0.0-60.0 sec   160 MBytes  22.4 Mbits/sec
[  4]  0.0-60.1 sec  77.8 MBytes  10.9 Mbits/sec
[  3]  0.0-60.1 sec   161 MBytes  22.5 Mbits/sec
[SUM]  0.0-60.1 sec   722 MBytes   101 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec   112 MBytes  15.6 Mbits/sec
[  6]  0.0-60.1 sec  48.6 MBytes  6.79 Mbits/sec
[ 10]  0.0-60.1 sec  59.5 MBytes  8.31 Mbits/sec
[  8]  0.0-60.1 sec   116 MBytes  16.1 Mbits/sec
[  9]  0.0-60.2 sec  51.9 MBytes  7.23 Mbits/sec
[  4]  0.0-60.2 sec   113 MBytes  15.8 Mbits/sec
[  3]  0.0-60.2 sec  40.5 MBytes  5.64 Mbits/sec
[  7]  0.0-60.2 sec   110 MBytes  15.3 Mbits/sec
[ 11]  0.0-60.3 sec  29.4 MBytes  4.09 Mbits/sec
[ 12]  0.0-60.6 sec  46.4 MBytes  6.42 Mbits/sec
[SUM]  0.0-60.6 sec   726 MBytes   101 Mbits/sec

Iperf InstaGENI MAX Raw-PC to InstaGENI GPO Raw-PC (UDP) - UDP buffer size: 114 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   700 MBytes  97.7 Mbits/sec   0.023 ms 13840/512820 (2.7%)
[  3]  0.0-60.1 sec  3 datagrams received out-of-order

Ping from InstaGENI MAX Raw-PC to InstaGENI GPO Raw-PC

60 packets transmitted, 60 received, 0% packet loss, time 59112ms
rtt min/avg/max/mdev = 11.526/11.606/11.946/0.159 ms

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSPec IG-ST-2.rspec:

$ omni.py createslice IG-ST-2
13:19:49 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
13:19:49 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
13:19:49 INFO     omni: Using control framework portal
13:19:51 INFO     omni: Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2, Expiration 2013-12-10 18:19:50
13:19:51 INFO     omni:  ------------------------------------------------------------
13:19:51 INFO     omni:  Completed createslice:
Args: createslice IG-ST-2

  Result Summary: Created slice with Name IG-ST-2, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2, Expiration 2013-12-10 18:19:50
 
13:19:51 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
13:20:03 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
13:20:03 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
13:20:03 INFO     stitcher: Using control framework portal
13:20:04 INFO     stitcher: Checking that slice IG-ST-2 is valid...
13:20:05 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2 expires on 2013-12-10 18:19:50 UTC
13:20:06 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
13:20:06 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> speaks AM API v3, but sticking with v2
13:20:17 ERROR    omni.pgch: Call for Test PG AM for GENI API compatibilitity at https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0 failed.: Unknown SSL error The read operation timed out
13:20:17 ERROR    omni.pgch:     ..... Run with --debug for more information
13:20:39 ERROR    stitcher: RSpec requires AM urn:publicid:IDN+instageni.max.edu+authority+cm which is not in workflow and URL is unknown!
13:20:39 INFO     stitcher: Stitched reservation will include resources from these aggregates:
13:20:39 INFO     stitcher: 	<Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>
13:20:39 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
13:20:39 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm>
13:20:39 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
13:20:39 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-dragon-maxgigapop-net.xml'
13:20:39 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://max-myplc.dragon.maxgigapop.net:12346
13:21:25 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>: must wait for status ready....
13:21:25 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:22:02 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:22:40 INFO     stitch.Aggregate: DCN circuit 2833 is ready
13:22:40 INFO     stitch.Aggregate: DCN circuit 2832 is ready
13:22:47 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am> complete.
13:22:47 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-gpolab-bbn-com.xml'
13:22:47 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
13:23:03 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
13:23:03 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-maxgigapop-net.xml'
13:23:03 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.maxgigapop.net:12369/protogeni/xmlrpc/am
13:23:18 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> complete.
13:23:18 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-ion-internet2-edu.xml'
13:23:18 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
13:24:01 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
13:24:01 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:24:38 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:25:15 INFO     stitch.Aggregate: DCN circuit 52461 is ready
13:25:15 INFO     stitch.Aggregate: DCN circuit 52471 is ready
13:25:22 WARNING  stitch.Aggregate: Changing Path link1 global ID from dragon.maxgigapop.net-2833 to ion.internet2.edu-52471
13:25:22 WARNING  stitch.Aggregate: Changing Path link global ID from dragon.maxgigapop.net-2832 to ion.internet2.edu-52461
13:25:22 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
13:25:22 INFO     stitch.launcher: All aggregates are complete.
13:25:22 INFO     stitcher: Writing to 'IG-ST-2-manifest-rspec-stitching-combined.xml'
13:25:22 INFO     stitcher: Saved combined reservation RSpec at 4 AMs to file IG-ST-2-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 link(s).

Determined login information at each MAX and GPO aggregate:

$ readyToLogin.py IG-ST-2 -a max-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.maxgigapop.net:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-max's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-max using:
	ssh -p 35642  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.maxgigapop.net

$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-gpo using:
	ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com

Login to each host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

[lnevers@ig-gpo ~]$ ping 10.10.4.2 -c 60 -q
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59104ms
rtt min/avg/max/mdev = 11.545/11.896/24.277/1.620 ms

IG-ST-3 IG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSPec IG-ST-t32.rspec:

$ omni.py createslice IG-ST-3
13:30:32 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
13:30:32 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
13:30:32 INFO     omni: Using control framework portal
13:30:35 INFO     omni: Created slice with Name IG-ST-3, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3, Expiration 2013-12-10 18:30:34
13:30:35 INFO     omni:  ------------------------------------------------------------
13:30:35 INFO     omni:  Completed createslice:
Args: createslice IG-ST-3
  Result Summary: Created slice with Name IG-ST-3, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3, Expiration 2013-12-10 18:30:34
13:30:35 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
13:31:37 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
13:31:37 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
13:31:37 INFO     stitcher: Using control framework portal
13:31:38 INFO     stitcher: Checking that slice IG-ST-3 is valid...
13:31:39 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3 expires on 2013-12-10 18:30:34 UTC
13:31:40 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> speaks AM API v3, but sticking with v2
13:31:40 INFO     stitcher: <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> speaks AM API v3, but sticking with v2
13:31:40 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
13:31:41 INFO     stitcher: <Aggregate urn:publicid:IDN+emulab.net+authority+cm> speaks AM API v3, but sticking with v2
13:31:41 INFO     stitcher: Stitched reservation will include resources from these aggregates:
13:31:41 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm>
13:31:41 INFO     stitcher: 	<Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm>
13:31:41 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
13:31:41 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
13:31:41 INFO     stitcher: 	<Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>
13:31:41 INFO     stitcher: 	<Aggregate urn:publicid:IDN+emulab.net+authority+cm>
13:31:41 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-instageni-gpolab-bbn-com.xml'
13:31:41 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
13:32:00 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
13:32:00 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-dragon-maxgigapop-net.xml'
13:32:00 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://max-myplc.dragon.maxgigapop.net:12346
13:32:45 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>: must wait for status ready....
13:32:45 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:33:22 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:34:00 INFO     stitch.Aggregate: DCN circuit 2834 is ready
13:34:00 INFO     stitch.Aggregate: DCN circuit 2835 is ready
13:34:07 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am> complete.
13:34:07 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-emulab-net.xml'
13:34:07 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.emulab.net:12369/protogeni/xmlrpc/am
13:35:32 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+emulab.net+authority+cm> complete.
13:35:32 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-instageni-maxgigapop-net.xml'
13:35:32 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.maxgigapop.net:12369/protogeni/xmlrpc/am
13:35:49 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> complete.
13:35:49 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-utah-geniracks-net.xml'
13:35:49 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
13:36:03 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> complete.
13:36:03 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-ion-internet2-edu.xml'
13:36:03 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
13:36:46 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
13:36:46 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:37:23 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
13:38:00 INFO     stitch.Aggregate: DCN circuit 52481 is ready
13:38:00 INFO     stitch.Aggregate: DCN circuit 52491 is ready
13:38:07 WARNING  stitch.Aggregate: Changing Path link global ID from dragon.maxgigapop.net-2834 to ion.internet2.edu-52481
13:38:07 WARNING  stitch.Aggregate: Changing Path link1 global ID from dragon.maxgigapop.net-2835 to ion.internet2.edu-52491
13:38:07 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
13:38:07 INFO     stitch.launcher: All aggregates are complete.
13:38:07 INFO     stitcher: Writing to 'IG-ST-3-manifest-rspec-stitching-combined.xml'
13:38:07 INFO     stitcher: Saved combined reservation RSpec at 6 AMs to file IG-ST-3-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-3 at 6 Aggregates (including 3 intermediate aggregate(s) not in the original request), creating 2 link(s).

Determined login information the MAX host:

$ readyToLogin.py IG-ST-3 -a max-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.maxgigapop.net:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

max's geni_status is: ready (am_status:ready) 
User lnevers logs in to max using:
	ssh -p 35642  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.maxgigapop.net

Login to the MAX host and ping each remote:

#ping GPO IG 
[lnevers@max ~]$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59106ms
rtt min/avg/max/mdev = 11.564/11.871/23.817/1.564 ms

# Utah IG
[lnevers@max ~]$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.
--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59089ms
rtt min/avg/max/mdev = 93.337/95.017/187.259/12.013 ms

IG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSPec IG-ST-4.rspec:

$ omni.py createslice IG-ST-4
13:46:27 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
13:46:27 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
13:46:27 INFO     omni: Using control framework portal
13:46:29 INFO     omni: Created slice with Name IG-ST-4, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-4, Expiration 2013-12-10 13:49:22
13:46:29 INFO     omni:  ------------------------------------------------------------
13:46:29 INFO     omni:  Completed createslice:
Args: createslice IG-ST-4
  Result Summary: Created slice with Name IG-ST-4, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-4, Expiration 2013-12-10 13:49:22
13:46:29 INFO     omni:  ============================================================

$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o --noExoSM
14:05:05 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
14:05:05 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
14:05:05 INFO     stitcher: Using control framework portal
14:05:06 INFO     stitcher: Checking that slice IG-ST-4 is valid...
14:05:07 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-4 expires on 2013-12-10 13:49:22 UTC
14:05:08 WARNING  stitcher: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am> used ExoSM URL. Changing to https://bbn-hn.exogeni.net:11443/orca/xmlrpc
14:05:08 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> speaks AM API v3, but sticking with v2
14:05:18 ERROR    omni.pgch: Call for Test PG AM for GENI API compatibilitity at https://www.emulab.net:12369/protogeni/xmlrpc/am/2.0 failed.: Unknown SSL error The read operation timed out
14:05:18 ERROR    omni.pgch:     ..... Run with --debug for more information
14:05:43 ERROR    stitcher: RSpec requires AM urn:publicid:IDN+instageni.max.edu+authority+cm which is not in workflow and URL is unknown!
14:05:43 INFO     stitcher: Stitched reservation will include resources from these aggregates:
14:05:43 INFO     stitcher: 	<Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>
14:05:43 INFO     stitcher: 	<Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>
14:05:43 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm>
14:05:43 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
14:05:43 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-dragon-maxgigapop-net.xml'
14:05:43 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://max-myplc.dragon.maxgigapop.net:12346
14:06:29 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am>: must wait for status ready....
14:06:29 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
14:07:06 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
14:07:43 INFO     stitch.Aggregate: DCN circuit 2837 is ready
14:07:51 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+dragon.maxgigapop.net+authority+am> complete.
14:07:51 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-exogeni-net-bbnvmsite.xml'
14:07:51 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://bbn-hn.exogeni.net:11443/orca/xmlrpc
14:07:55 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnvmsite+interface+Bbn:ExoGeni:TenGigabitEthernet:1:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
14:07:55 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3738
14:07:55 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:GigabitEthernet:1:2:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
14:07:55 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3738
14:07:55 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:TenGigabitEthernet:1:1:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
14:07:55 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3738
14:07:55 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am> complete.
14:07:55 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-instageni-maxgigapop-net.xml'
14:07:55 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.maxgigapop.net:12369/protogeni/xmlrpc/am
14:08:10 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.maxgigapop.net+authority+cm> complete.
14:08:10 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-ion-internet2-edu.xml'
14:08:10 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
14:08:54 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
14:08:54 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
14:09:30 INFO     stitch.Aggregate: DCN circuit 52501 is ready
14:09:37 WARNING  stitch.Aggregate: Changing Path link-eggpo-igutah global ID from dragon.maxgigapop.net-2837 to ion.internet2.edu-52501
14:09:37 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
14:09:37 INFO     stitch.launcher: All aggregates are complete.
14:09:37 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnvmsite+interface+Bbn:ExoGeni:TenGigabitEthernet:1:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
14:09:37 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:GigabitEthernet:1:2:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
14:09:37 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:TenGigabitEthernet:1:1:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
14:09:37 ERROR    stitcher: Manifest RSpec file did not contain a Manifest RSpec (wrong type or schema)
14:09:37 INFO     stitcher: Writing to 'IG-ST-4-manifest-rspec-stitching-combined.xml'
14:09:37 INFO     stitcher: Saved combined reservation RSpec at 4 AMs to file IG-ST-4-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 link(s).

Determined login information at each MAX and GPO aggregate:

$ readyToLogin.py IG-ST-4 -a max-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.maxgigapop.net:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-max's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-max using:
	ssh -p 35642  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.maxgigapop.net

$ readyToLogin.py IG-ST-4 -a gpo-eg
  ....
================================================================================
LOGIN INFO for AM: https://bbn-hn.exogeni.net:11443/orca/xmlrpc
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

eg-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.22

Measurements XEN VM

Iperf ExoGENI GPO VM to InstaGENI MAX XEN VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2013-12-03

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-61.8 sec    728 KBytes  96.5 Kbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-67.7 sec    224 KBytes  27.1 Kbits/sec
[  7]  0.0-70.4 sec    248 KBytes  28.9 Kbits/sec
[  5]  0.0-72.5 sec    176 KBytes  19.9 Kbits/sec
[  3]  0.0-81.3 sec    240 KBytes  24.2 Kbits/sec
[  6]  0.0-82.3 sec    240 KBytes  23.9 Kbits/sec
[SUM]  0.0-82.3 sec  1.10 MBytes    112 Kbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-63.8 sec    136 KBytes  17.5 Kbits/sec
[ 12]  0.0-65.1 sec    144 KBytes  18.1 Kbits/sec
[  6]  0.0-71.6 sec    152 KBytes  17.4 Kbits/sec
[  4]  0.0-74.4 sec    144 KBytes  15.9 Kbits/sec
[  9]  0.0-75.5 sec   32.0 KBytes  3.47 Kbits/sec
[  8]  0.0-76.3 sec    168 KBytes  18.0 Kbits/sec
[ 10]  0.0-77.4 sec    176 KBytes  18.6 Kbits/sec
[ 11]  0.0-91.0 sec    144 KBytes  13.0 Kbits/sec
[  3]  0.0-101.8 sec   168 KBytes  13.5 Kbits/sec
[  7]  0.0-124.1 sec   104 KBytes  6.86 Kbits/sec
[SUM]  0.0-124.1 sec  1.34 MBytes  90.3 Kbits/sec

Iperf ExoGENI GPO VM to InstaGENI MAX XEN VM (UDP) - UDP buffer size: 122 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  71.5 MBytes  10.0 Mbits/sec
[  3] Sent 51022 datagrams
[  3] Server Report:
[  3]  0.0-60.3 sec    711 KBytes  96.6 Kbits/sec  24.893 ms 50519/51014 (99%)

Ping from ExoGENI GPO VM to InstaGENI MAX XEN VM

60 packets transmitted, 60 received, 0% packet loss, time 59099ms
rtt min/avg/max/mdev = 11.788/12.127/19.499/0.984 ms

Iperf InstaGENI MAX XEN VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2013-12-03

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-62.4 sec  6.25 MBytes   840 Kbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.8 sec  4.88 MBytes   684 Kbits/sec
[  6]  0.0-70.5 sec   384 KBytes  44.6 Kbits/sec
[  3]  0.0-73.6 sec   384 KBytes  42.7 Kbits/sec
[  7]  0.0-101.5 sec  256 KBytes  20.7 Kbits/sec
[  5]  0.0-107.9 sec  512 KBytes  38.9 Kbits/sec
[SUM]  0.0-107.9 sec 6.38 MBytes   496 Kbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-63.5 sec  4.88 MBytes   644 Kbits/sec
[ 12]  0.0-86.2 sec   384 KBytes  36.5 Kbits/sec
[  8]  0.0-88.2 sec   256 KBytes  23.8 Kbits/sec
[  4]  0.0-96.0 sec   512 KBytes  43.7 Kbits/sec
[ 11]  0.0-98.8 sec   384 KBytes  31.8 Kbits/sec
[  9]  0.0-107.0 sec  256 KBytes  19.6 Kbits/sec
[  6]  0.0-127.1 sec  256 KBytes  16.5 Kbits/sec
[  3]  0.0-177.7 sec  256 KBytes  11.8 Kbits/sec
[ 10]  0.0-180.5 sec  256 KBytes  11.6 Kbits/sec
[  7]  0.0-215.8 sec  256 KBytes  9.72 Kbits/sec
[SUM]  0.0-215.8 sec 7.62 MBytes   296 Kbits/sec

Iperf InstaGENI MAX XEN VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  71.5 MBytes  10.0 Mbits/sec
[  3] Sent 51022 datagrams
[  3] Server Report:
[  3]  0.0-62.3 sec  34.5 MBytes  4.65 Mbits/sec   5.077 ms 26384/51021 (52%)
[  3]  0.0-62.3 sec  1 datagrams received out-of-order

Ping from InstaGENI MAX XEN VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59091ms
rtt min/avg/max/mdev = 11.733/11.991/13.143/0.239 ms

Measurements Raw-PC

Iperf InstaGENI GPO Raw-PC to InstaGENI MAX Raw-PC (TCP) - TCP window size: 16.0 KByte (default)

Collected: 2013-12-05

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.8 sec    720 KBytes  97.0 Kbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-61.1 sec    160 KBytes  21.4 Kbits/sec
[  4]  0.0-66.0 sec    200 KBytes  24.8 Kbits/sec
[  3]  0.0-66.4 sec    264 KBytes  32.6 Kbits/sec
[  5]  0.0-67.7 sec    264 KBytes  31.9 Kbits/sec
[  7]  0.0-80.0 sec    264 KBytes  27.0 Kbits/sec
[SUM]  0.0-80.0 sec  1.12 MBytes    118 Kbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  9]  0.0-61.5 sec  24.0 KBytes  3.20 Kbits/sec
[ 10]  0.0-64.4 sec  40.0 KBytes  5.09 Kbits/sec
[ 12]  0.0-76.8 sec    144 KBytes  15.4 Kbits/sec
[  3]  0.0-78.6 sec    176 KBytes  18.3 Kbits/sec
[  8]  0.0-79.2 sec    208 KBytes  21.5 Kbits/sec
[  5]  0.0-82.3 sec    128 KBytes  12.7 Kbits/sec
[  6]  0.0-84.9 sec    168 KBytes  16.2 Kbits/sec
[  4]  0.0-86.3 sec    136 KBytes  12.9 Kbits/sec
[ 11]  0.0-106.1 sec    208 KBytes  16.1 Kbits/sec
[  7]  0.0-111.9 sec    208 KBytes  15.2 Kbits/sec
[SUM]  0.0-111.9 sec  1.41 MBytes    105 Kbits/sec

Iperf InstaGENI GPO Raw-PC to InstaGENI MAX Raw-PC (UDP) - UDP buffer size: 114 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec    719 MBytes    101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec    711 KBytes  96.6 Kbits/sec  28.215 ms 512293/512788 (1e+02%)

Ping from InstaGENI GPO Raw-PC to InstaGENI MAX Raw-PC

60 packets transmitted, 60 received, 0% packet loss, time 59104ms
rtt min/avg/max/mdev = 11.560/11.795/16.349/0.603 ms

Iperf InstaGENI MAX Raw-PC to InstaGENI GPO Raw-PC (TCP) - TCP window size: 16.0 KByte (default)

Collected: 2013-12-05

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-62.8 sec  5.38 MBytes   719 Kbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-59.4 sec  3.62 MBytes   512 Kbits/sec
[  6]  0.0-85.6 sec   512 KBytes  49.0 Kbits/sec
[  3]  0.0-90.7 sec   256 KBytes  23.1 Kbits/sec
[  7]  0.0-93.8 sec   256 KBytes  22.4 Kbits/sec
[  4]  0.0-100.8 sec   256 KBytes  20.8 Kbits/sec
[SUM]  0.0-100.8 sec  4.88 MBytes   406 Kbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-64.3 sec  2.50 MBytes   326 Kbits/sec
[  4]  0.0-85.9 sec   256 KBytes  24.4 Kbits/sec
[  7]  0.0-96.9 sec   384 KBytes  32.4 Kbits/sec
[ 12]  0.0-107.3 sec   384 KBytes  29.3 Kbits/sec
[  6]  0.0-114.1 sec   256 KBytes  18.4 Kbits/sec
[  3]  0.0-121.5 sec   256 KBytes  17.3 Kbits/sec
[ 11]  0.0-122.2 sec   512 KBytes  34.3 Kbits/sec
[  8]  0.0-124.9 sec   384 KBytes  25.2 Kbits/sec
[ 10]  0.0-150.8 sec   256 KBytes  13.9 Kbits/sec
[  9]  0.0-237.7 sec   256 KBytes  8.82 Kbits/sec
[SUM]  0.0-237.7 sec  5.38 MBytes   190 Kbits/sec

Iperf InstaGENI MAX Raw-PC to InstaGENI GPO Raw-PC (UDP) - UDP buffer size: 114 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-62.4 sec   206 MBytes  27.8 Mbits/sec   4.544 ms 365607/512820 (71%)
[  3]  0.0-62.4 sec  1 datagrams received out-of-order

Ping from InstaGENI MAX Raw-PC to InstaGENI GPO Raw-PC

60 packets transmitted, 59 received, 1% packet loss, time 59112ms
rtt min/avg/max/mdev = 11.539/11.716/12.407/0.198 ms

IG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the MAX Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. Added site to the list of GENI Network Stitching Sites.

IG-ST-6 New Site OpenFlow topology

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

$ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o
09:49:47 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
09:49:47 INFO    : Reading slice IG-ST-6 credential...
09:49:47 INFO    : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6 expires on 2014-08-05 13:46:53 UTC
09:49:47 INFO    : Using SCS at http://geni.maxgigapop.net:8081/geni/xmlrpc
09:49:47 INFO    : Calling SCS...
09:49:50 INFO    : Multi-AM reservation will include resources from these aggregates:
09:49:50 INFO    : 	<Aggregate max>
09:49:50 INFO    : 	<Aggregate gpo-ig>
09:49:50 INFO    : 	<Aggregate max-ig>
09:49:50 INFO    : 	<Aggregate ion>
09:49:50 INFO    : Stitcher doing createsliver at <Aggregate max>...
09:50:38 INFO    : DCN AM <Aggregate max>: must wait for status ready....
09:50:38 INFO    : Pausing 30 seconds to let circuit become ready...
09:51:19 INFO    : Pausing 30 seconds to let circuit become ready...
09:51:58 INFO    : DCN circuit 3875 is ready at <Aggregate max>
09:52:11 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-6-for-lnevers-cred.xml
09:52:11 INFO    : ... Allocation at <Aggregate max> complete.
09:52:11 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
09:52:25 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
09:52:25 INFO    : Stitcher doing createsliver at <Aggregate max-ig>...
09:52:50 INFO    : ... Allocation at <Aggregate max-ig> complete.
09:52:50 INFO    : Stitcher doing createsliver at <Aggregate ion>...
09:53:35 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
09:53:35 INFO    : Pausing 30 seconds to let circuit become ready...
09:54:12 INFO    : DCN circuit 110331 is ready at <Aggregate ion>
09:54:19 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-6-for-lnevers-cred.xml
09:54:19 INFO    : ... Allocation at <Aggregate ion> complete.
09:54:19 INFO    : All aggregates are complete.
09:54:19 INFO    : Your resources expire at 3 different times at different AMs. The first expiration is 2014-07-30 13:49:55 UTC at <Aggregate max> and <Aggregate ion>. Second expiration is 2014-08-05T13:46:53 UTC. 
09:54:19 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/MAX/IG-ST-6-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-6 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each MAX and GPO aggregate:

$ readyToLogin.py IG-ST-6 -a max-ig
  ....
ig-max's geni_status is: changing 
User lnevers logs in to ig-max using:
  ssh -p 32570  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.maxgigapop.net

$ readyToLogin.py IG-ST-6 -a gpo-ig
  ....
ig-gpo's geni_status is: changing 
User lnevers logs in to ig-gpo using:
  ssh -p 33082  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI MAX VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-07-29

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.4 sec   142 MBytes  19.7 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.9 sec  22.8 MBytes  3.19 Mbits/sec
[  7]  0.0-60.1 sec  28.0 MBytes  3.91 Mbits/sec
[  3]  0.0-60.3 sec  33.9 MBytes  4.72 Mbits/sec
[  6]  0.0-60.4 sec  26.5 MBytes  3.68 Mbits/sec
[  5]  0.0-60.7 sec  32.4 MBytes  4.47 Mbits/sec
[SUM]  0.0-60.7 sec   144 MBytes  19.8 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-59.6 sec  15.9 MBytes  2.23 Mbits/sec
[  3]  0.0-59.9 sec  12.0 MBytes  1.68 Mbits/sec
[  9]  0.0-60.2 sec  10.9 MBytes  1.52 Mbits/sec
[  5]  0.0-60.2 sec  17.2 MBytes  2.40 Mbits/sec
[  7]  0.0-60.4 sec  11.9 MBytes  1.65 Mbits/sec
[ 12]  0.0-60.6 sec  17.9 MBytes  2.48 Mbits/sec
[  6]  0.0-60.8 sec  13.4 MBytes  1.85 Mbits/sec
[ 10]  0.0-60.9 sec  15.6 MBytes  2.15 Mbits/sec
[  8]  0.0-60.9 sec  14.0 MBytes  1.93 Mbits/sec
[ 11]  0.0-61.2 sec  16.2 MBytes  2.23 Mbits/sec
[SUM]  0.0-61.2 sec   145 MBytes  19.9 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI MAX VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-44.2 sec   952 MBytes   181 Mbits/sec
[  3] Sent 679113 datagrams
[  3] Server Report:
[  3]  0.0-45.8 sec   106 MBytes  19.4 Mbits/sec  13.516 ms 603657/679104 (89%)
[  3]  0.0-45.8 sec  53 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI MAX VM

60 packets transmitted, 60 received, 0% packet loss, time 59071ms
rtt min/avg/max/mdev = 11.952/47.418/1422.592/195.955 ms, pipe 2

Iperf InstaGENI MAX VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-07-29

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   142 MBytes  19.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-59.8 sec  23.6 MBytes  3.31 Mbits/sec
[  5]  0.0-60.4 sec  23.2 MBytes  3.23 Mbits/sec
[  7]  0.0-60.6 sec  36.0 MBytes  4.99 Mbits/sec
[  4]  0.0-60.9 sec  32.5 MBytes  4.48 Mbits/sec
[  6]  0.0-61.0 sec  27.9 MBytes  3.83 Mbits/sec
[SUM]  0.0-61.0 sec   143 MBytes  19.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  8]  0.0-59.9 sec  15.9 MBytes  2.22 Mbits/sec
[  3]  0.0-60.1 sec  12.9 MBytes  1.80 Mbits/sec
[  4]  0.0-60.3 sec  13.5 MBytes  1.88 Mbits/sec
[  5]  0.0-60.6 sec  19.5 MBytes  2.70 Mbits/sec
[ 11]  0.0-60.8 sec  8.75 MBytes  1.21 Mbits/sec
[  6]  0.0-60.9 sec  14.1 MBytes  1.95 Mbits/sec
[ 10]  0.0-61.1 sec  16.8 MBytes  2.30 Mbits/sec
[  9]  0.0-61.4 sec  16.9 MBytes  2.31 Mbits/sec
[ 12]  0.0-61.4 sec  14.2 MBytes  1.95 Mbits/sec
[  7]  0.0-61.5 sec  13.9 MBytes  1.89 Mbits/sec
[SUM]  0.0-61.5 sec   146 MBytes  20.0 Mbits/sec

Iperf InstaGENI MAX VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512773 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec   7.539 ms 413690/512772 (81%)
[  3]  0.0-60.2 sec  69 datagrams received out-of-order

Ping from InstaGENI MAX VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59081ms
rtt min/avg/max/mdev = 11.826/14.947/104.648/14.916 ms
Last modified 10 years ago Last modified on 07/29/14 10:20:49