[[PageOutline]] = University of Kansas Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == IG-ST-1 New Site to GPO IG topology == The KANSAS site advertises the following stitching details: {{{ protogeni chainANDTree false false 2014-11-18T18:30:48Z 2014-11-18T18:30:48Z 1000000 1000000 1000 1 urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.kans.net.internet2.edu:eth5/1:kansas-ig 10 1000000 1000000 1000 1 l2sc ethernet 1500 1170-1189 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/KANSAS/IG-ST-1-al2s.rspec IG-ST-1-al2s.rspec]: {{{ $ stitcher.py createsliver IG-ST-1a IG-ST-1-al2s.rspec -o 14:15:31 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 14:15:32 INFO : Reading slice IG-ST-1a credential... 14:15:32 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1a expires on 2014-11-25 19:13:52 UTC 14:15:32 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 14:15:32 INFO : Calling SCS... 14:15:33 INFO : Multi-AM reservation will include resources from these aggregates: 14:15:33 INFO : 14:15:33 INFO : 14:15:33 INFO : 14:15:33 INFO : 14:15:33 INFO : Stitcher doing createsliver at ... 14:15:55 INFO : ... Allocation at complete. 14:15:55 INFO : Stitcher doing createsliver at ... 14:16:11 INFO : ... Allocation at complete. 14:16:11 INFO : Stitcher doing createsliver at ... 14:16:15 INFO : ... Allocation at complete. 14:16:15 INFO : Stitcher doing createsliver at ... 14:17:02 INFO : DCN AM : must wait for status ready.... 14:17:02 INFO : Pausing 30 seconds to let circuit become ready... 14:17:40 INFO : DCN circuit 139211 is ready at 14:17:47 INFO : ... Allocation at complete. 14:17:47 INFO : All aggregates are complete. 14:17:47 INFO : Your resources expire at 2014-11-24T19:05:33 (UTC). 14:17:47 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Kansas/IG-ST-1a-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-1a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each KANSAS and GPO aggregate: {{{ $ readyToLogin.py IG-ST-1a -a kansas-ig .... ig-chic's geni_status is: ready User lnevers logs in to ig-chic using: ssh -p 30010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.ku.gpeni.net $ readyToLogin.py IG-ST-1a -a gpo-ig .... ig-gpo's geni_status is: changing User lnevers logs in to ig-gpo using: ssh -p 34362 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI KANSAS VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-11-18'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 141 MBytes 19.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.0 sec 36.5 MBytes 5.10 Mbits/sec [ 5] 0.0-60.1 sec 28.6 MBytes 4.00 Mbits/sec [ 7] 0.0-60.2 sec 23.1 MBytes 3.22 Mbits/sec [ 6] 0.0-60.3 sec 26.0 MBytes 3.62 Mbits/sec [ 3] 0.0-60.4 sec 29.8 MBytes 4.13 Mbits/sec [SUM] 0.0-60.4 sec 144 MBytes 20.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 8] 0.0-60.1 sec 18.2 MBytes 2.55 Mbits/sec [ 5] 0.0-60.1 sec 15.1 MBytes 2.11 Mbits/sec [ 3] 0.0-60.2 sec 21.1 MBytes 2.95 Mbits/sec [ 12] 0.0-60.4 sec 8.12 MBytes 1.13 Mbits/sec [ 10] 0.0-60.5 sec 12.8 MBytes 1.77 Mbits/sec [ 9] 0.0-61.1 sec 12.1 MBytes 1.67 Mbits/sec [ 11] 0.0-61.5 sec 12.2 MBytes 1.67 Mbits/sec [ 4] 0.0-61.6 sec 16.8 MBytes 2.28 Mbits/sec [ 7] 0.0-61.6 sec 19.6 MBytes 2.67 Mbits/sec [ 6] 0.0-61.7 sec 10.4 MBytes 1.41 Mbits/sec [SUM] 0.0-61.7 sec 146 MBytes 19.9 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI KANSAS VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512813 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 139 MBytes 19.5 Mbits/sec 0.108 ms 413476/512808 (81%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the InstaGENI KANSAS VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59087ms rtt min/avg/max/mdev = 43.975/44.447/49.426/0.679 ms }}} '''Iperf InstaGENI KANSAS VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-11-18'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 142 MBytes 19.8 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.1 sec 25.1 MBytes 3.51 Mbits/sec [ 7] 0.0-60.2 sec 41.8 MBytes 5.82 Mbits/sec [ 5] 0.0-60.2 sec 24.8 MBytes 3.45 Mbits/sec [ 3] 0.0-60.6 sec 28.2 MBytes 3.91 Mbits/sec [ 6] 0.0-61.5 sec 24.2 MBytes 3.31 Mbits/sec [SUM] 0.0-61.5 sec 144 MBytes 19.7 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.3 sec 11.9 MBytes 1.65 Mbits/sec [ 10] 0.0-60.3 sec 14.1 MBytes 1.97 Mbits/sec [ 9] 0.0-60.3 sec 14.5 MBytes 2.02 Mbits/sec [ 4] 0.0-60.5 sec 18.1 MBytes 2.51 Mbits/sec [ 7] 0.0-60.7 sec 17.1 MBytes 2.37 Mbits/sec [ 12] 0.0-60.7 sec 12.2 MBytes 1.69 Mbits/sec [ 5] 0.0-61.0 sec 16.9 MBytes 2.32 Mbits/sec [ 8] 0.0-61.1 sec 11.8 MBytes 1.61 Mbits/sec [ 11] 0.0-61.4 sec 17.8 MBytes 2.43 Mbits/sec [ 6] 0.0-61.7 sec 12.1 MBytes 1.65 Mbits/sec [SUM] 0.0-61.7 sec 146 MBytes 19.9 Mbits/sec }}} '''Iperf InstaGENI KANSAS VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512806 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 13.769 ms 413480/512803 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI KANSAS VM to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59031ms rtt min/avg/max/mdev = 44.061/44.395/45.072/0.330 ms }}} == IG-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/KANSAS/IG-ST-2.rspec IG-ST-2.rspec]: {{{ $ stitcher.py createsliver IG-ST-2a IG-ST-2.rspec -o 14:45:41 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 14:45:41 INFO : Reading slice IG-ST-2a credential... 14:45:42 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2a expires on 2014-11-25 19:45:40 UTC 14:45:42 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 14:45:42 INFO : Calling SCS... 14:45:44 INFO : Multi-AM reservation will include resources from these aggregates: 14:45:44 INFO : 14:45:44 INFO : 14:45:44 INFO : 14:45:44 INFO : 14:45:44 INFO : Stitcher doing createsliver at ... 14:46:07 INFO : ... Allocation at complete. 14:46:07 INFO : Stitcher doing createsliver at ... 14:46:23 INFO : ... Allocation at complete. 14:46:24 INFO : Stitcher doing createsliver at ... 14:46:29 INFO : ... Allocation at complete. 14:46:29 INFO : Stitcher doing createsliver at ... 14:47:21 INFO : DCN AM : must wait for status ready.... 14:47:21 INFO : Pausing 30 seconds to let circuit become ready... 14:48:00 INFO : Pausing 30 seconds to let circuit become ready... 14:48:41 INFO : DCN circuit 139251 is ready at 14:48:49 INFO : ... Allocation at complete. 14:48:49 INFO : All aggregates are complete. 14:48:49 INFO : Your resources expire at 2014-11-24T19:35:44 (UTC). 14:48:49 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Kansas/IG-ST-2a-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each KANSAS and GPO aggregate: {{{ $ readyToLogin.py IG-ST-2a -a kansas-ig .... ig-kans's geni_status is: ready User lnevers logs in to ig-kans using: ssh -p 30010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.ku.gpeni.net $ readyToLogin.py IG-ST-2a -a gpo-ig .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 35642 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ $ remote-execute.py IG-ST-2a -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" 1. Find login Info for hosts in slice IG-ST-2a 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59100ms rtt min/avg/max/mdev = 43.644/43.709/44.034/0.224 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59104ms rtt min/avg/max/mdev = 43.645/43.709/43.829/0.199 ms ... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo }}} == IG-ST-3 IG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/KANSAS/IG-ST-3.rspec IG-ST-3.rspec]: {{{ $ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o 15:20:31 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 15:20:31 INFO : Reading slice IG-ST-3 credential... 15:20:32 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2014-11-25 20:06:43 UTC 15:20:32 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 15:20:32 INFO : Calling SCS... 15:20:36 INFO : Multi-AM reservation will include resources from these aggregates: 15:20:36 INFO : 15:20:36 INFO : 15:20:36 INFO : 15:20:36 INFO : 15:20:36 INFO : 15:20:36 INFO : Stitcher doing createsliver at ... 15:20:57 INFO : ... Allocation at complete. 15:20:57 INFO : Stitcher doing createsliver at ... 15:21:20 INFO : ... Allocation at complete. 15:21:20 INFO : Stitcher doing createsliver at ... 15:21:37 INFO : ... Allocation at complete. 15:21:37 INFO : Stitcher doing createsliver at ... 15:21:42 INFO : ... Allocation at complete. 15:21:42 INFO : Stitcher doing createsliver at ... 15:22:28 INFO : DCN AM : must wait for status ready.... 15:22:28 INFO : Pausing 30 seconds to let circuit become ready... 15:23:05 INFO : Pausing 30 seconds to let circuit become ready... 15:23:43 INFO : DCN circuit 139321 is ready at 15:23:43 INFO : DCN circuit 139311 is ready at 15:23:50 INFO : ... Allocation at complete. 15:23:50 INFO : All aggregates are complete. 15:23:50 INFO : Your resources expire at 2014-11-24T20:10:36 (UTC). 15:23:50 INFO : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/Kansas/IG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the KANSAS host: {{{ $ readyToLogin.py IG-ST-3 -a kansas-ig .... ig-kans's geni_status is: ready User lnevers logs in to ig-kans using: ssh -p 30010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.ku.gpeni.net }}} Login to the KANSAS host and ping each remote: {{{ #ping GPO IG [lnevers@ig-kans ~]$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59094ms rtt min/avg/max/mdev = 43.647/43.702/43.818/0.119 ms # UKYPKS2 IG [lnevers@ig-kans ~]$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59109ms rtt min/avg/max/mdev = 42.696/42.756/42.828/0.229 ms }}} == IG-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/KANSAS/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG. {{{ omni.py createslice IG-ST-4 stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o }}} Determined login information at each KANSAS and GPO aggregate: {{{ $ readyToLogin.py IG-ST-4 -a kansas-ig .... $ readyToLogin.py IG-ST-4 -a eg-sm .... }}} === Measurements === '''Iperf ExoGENI GPO VM to InstaGENI KANSAS VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-08-XX'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf ExoGENI GPO VM to InstaGENI KANSAS VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from ExoGENI GPO VM to the InstaGENI KANSAS VM ''' {{{ }}} '''Iperf InstaGENI KANSAS VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-08-XX'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf InstaGENI KANSAS VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from InstaGENI KANSAS VM to ExoGENI GPO VM ''' {{{ }}} == IG-ST-5 Site Information == Various pages include stitching information for a site. Each of the following were verified for this site: 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/KANSASInstaGENI#GENINetworkStitching KANSAS Aggregate] page. 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs]. 3. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found. 4. Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. == IG-ST-6 New Site !OpenFlow topology == Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/KANSAS/IG-ST-6.rspec IG-ST-6.rspec]: {{{ omni.py createslice IG-ST-6 stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o }}} Determined login information at each KANSAS and GPO aggregate: {{{ $ readyToLogin.py IG-ST-6 -a kansas-ig .... $ readyToLogin.py IG-ST-6 -a gpo-ig .... }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI KANSAS VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-xx-xx'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf InstaGENI GPO VM to InstaGENI KANSAS VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from InstaGENI GPO VM to InstaGENI KANSAS VM ''' {{{ }}} '''Iperf InstaGENI KANSAS VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-xx-xx'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf InstaGENI KANSAS VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from InstaGENI KANSAS VM to InstaGENI GPO VM ''' {{{ }}} ------ {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}