[[PageOutline]] = University of Kansas Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == IG-ST-1 New Site to GPO IG topology == The KANSAS site advertises the following stitching details: {{{ protogeni chainANDTree false false 2014-11-18T18:30:48Z 2014-11-18T18:30:48Z 1000000 1000000 1000 1 urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.kans.net.internet2.edu:eth5/1:kansas-ig 10 1000000 1000000 1000 1 l2sc ethernet 1500 1170-1189 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/KANSAS/IG-ST-1-al2s.rspec IG-ST-1-al2s.rspec]: {{{ $ stitcher.py createsliver IG-ST-1a IG-ST-1-al2s.rspec -o 14:15:31 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 14:15:32 INFO : Reading slice IG-ST-1a credential... 14:15:32 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1a expires on 2014-11-25 19:13:52 UTC 14:15:32 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 14:15:32 INFO : Calling SCS... 14:15:33 INFO : Multi-AM reservation will include resources from these aggregates: 14:15:33 INFO : 14:15:33 INFO : 14:15:33 INFO : 14:15:33 INFO : 14:15:33 INFO : Stitcher doing createsliver at ... 14:15:55 INFO : ... Allocation at complete. 14:15:55 INFO : Stitcher doing createsliver at ... 14:16:11 INFO : ... Allocation at complete. 14:16:11 INFO : Stitcher doing createsliver at ... 14:16:15 INFO : ... Allocation at complete. 14:16:15 INFO : Stitcher doing createsliver at ... 14:17:02 INFO : DCN AM : must wait for status ready.... 14:17:02 INFO : Pausing 30 seconds to let circuit become ready... 14:17:40 INFO : DCN circuit 139211 is ready at 14:17:47 INFO : ... Allocation at complete. 14:17:47 INFO : All aggregates are complete. 14:17:47 INFO : Your resources expire at 2014-11-24T19:05:33 (UTC). 14:17:47 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Kansas/IG-ST-1a-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-1a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each KANSAS and GPO aggregate: {{{ $ readyToLogin.py IG-ST-1a -a kansas-ig .... ig-chic's geni_status is: ready User lnevers logs in to ig-chic using: ssh -p 30010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.ku.gpeni.net $ readyToLogin.py IG-ST-1a -a gpo-ig .... ig-gpo's geni_status is: changing User lnevers logs in to ig-gpo using: ssh -p 34362 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI KANSAS VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-11-18'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 141 MBytes 19.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.0 sec 36.5 MBytes 5.10 Mbits/sec [ 5] 0.0-60.1 sec 28.6 MBytes 4.00 Mbits/sec [ 7] 0.0-60.2 sec 23.1 MBytes 3.22 Mbits/sec [ 6] 0.0-60.3 sec 26.0 MBytes 3.62 Mbits/sec [ 3] 0.0-60.4 sec 29.8 MBytes 4.13 Mbits/sec [SUM] 0.0-60.4 sec 144 MBytes 20.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 8] 0.0-60.1 sec 18.2 MBytes 2.55 Mbits/sec [ 5] 0.0-60.1 sec 15.1 MBytes 2.11 Mbits/sec [ 3] 0.0-60.2 sec 21.1 MBytes 2.95 Mbits/sec [ 12] 0.0-60.4 sec 8.12 MBytes 1.13 Mbits/sec [ 10] 0.0-60.5 sec 12.8 MBytes 1.77 Mbits/sec [ 9] 0.0-61.1 sec 12.1 MBytes 1.67 Mbits/sec [ 11] 0.0-61.5 sec 12.2 MBytes 1.67 Mbits/sec [ 4] 0.0-61.6 sec 16.8 MBytes 2.28 Mbits/sec [ 7] 0.0-61.6 sec 19.6 MBytes 2.67 Mbits/sec [ 6] 0.0-61.7 sec 10.4 MBytes 1.41 Mbits/sec [SUM] 0.0-61.7 sec 146 MBytes 19.9 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI KANSAS VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512813 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 139 MBytes 19.5 Mbits/sec 0.108 ms 413476/512808 (81%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the InstaGENI KANSAS VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59087ms rtt min/avg/max/mdev = 43.975/44.447/49.426/0.679 ms }}} '''Iperf InstaGENI KANSAS VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-11-18'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 142 MBytes 19.8 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.1 sec 25.1 MBytes 3.51 Mbits/sec [ 7] 0.0-60.2 sec 41.8 MBytes 5.82 Mbits/sec [ 5] 0.0-60.2 sec 24.8 MBytes 3.45 Mbits/sec [ 3] 0.0-60.6 sec 28.2 MBytes 3.91 Mbits/sec [ 6] 0.0-61.5 sec 24.2 MBytes 3.31 Mbits/sec [SUM] 0.0-61.5 sec 144 MBytes 19.7 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.3 sec 11.9 MBytes 1.65 Mbits/sec [ 10] 0.0-60.3 sec 14.1 MBytes 1.97 Mbits/sec [ 9] 0.0-60.3 sec 14.5 MBytes 2.02 Mbits/sec [ 4] 0.0-60.5 sec 18.1 MBytes 2.51 Mbits/sec [ 7] 0.0-60.7 sec 17.1 MBytes 2.37 Mbits/sec [ 12] 0.0-60.7 sec 12.2 MBytes 1.69 Mbits/sec [ 5] 0.0-61.0 sec 16.9 MBytes 2.32 Mbits/sec [ 8] 0.0-61.1 sec 11.8 MBytes 1.61 Mbits/sec [ 11] 0.0-61.4 sec 17.8 MBytes 2.43 Mbits/sec [ 6] 0.0-61.7 sec 12.1 MBytes 1.65 Mbits/sec [SUM] 0.0-61.7 sec 146 MBytes 19.9 Mbits/sec }}} '''Iperf InstaGENI KANSAS VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512806 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 13.769 ms 413480/512803 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI KANSAS VM to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59031ms rtt min/avg/max/mdev = 44.061/44.395/45.072/0.330 ms }}} == IG-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/KANSAS/IG-ST-2.rspec IG-ST-2.rspec]: {{{ $ stitcher.py createsliver IG-ST-2a IG-ST-2.rspec -o 14:45:41 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 14:45:41 INFO : Reading slice IG-ST-2a credential... 14:45:42 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2a expires on 2014-11-25 19:45:40 UTC 14:45:42 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 14:45:42 INFO : Calling SCS... 14:45:44 INFO : Multi-AM reservation will include resources from these aggregates: 14:45:44 INFO : 14:45:44 INFO : 14:45:44 INFO : 14:45:44 INFO : 14:45:44 INFO : Stitcher doing createsliver at ... 14:46:07 INFO : ... Allocation at complete. 14:46:07 INFO : Stitcher doing createsliver at ... 14:46:23 INFO : ... Allocation at complete. 14:46:24 INFO : Stitcher doing createsliver at ... 14:46:29 INFO : ... Allocation at complete. 14:46:29 INFO : Stitcher doing createsliver at ... 14:47:21 INFO : DCN AM : must wait for status ready.... 14:47:21 INFO : Pausing 30 seconds to let circuit become ready... 14:48:00 INFO : Pausing 30 seconds to let circuit become ready... 14:48:41 INFO : DCN circuit 139251 is ready at 14:48:49 INFO : ... Allocation at complete. 14:48:49 INFO : All aggregates are complete. 14:48:49 INFO : Your resources expire at 2014-11-24T19:35:44 (UTC). 14:48:49 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Kansas/IG-ST-2a-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each KANSAS and GPO aggregate: {{{ $ readyToLogin.py IG-ST-2a -a kansas-ig .... ig-kans's geni_status is: ready User lnevers logs in to ig-kans using: ssh -p 30010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.ku.gpeni.net $ readyToLogin.py IG-ST-2a -a gpo-ig .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 35642 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ $ remote-execute.py IG-ST-2a -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" 1. Find login Info for hosts in slice IG-ST-2a 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59100ms rtt min/avg/max/mdev = 43.644/43.709/44.034/0.224 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59104ms rtt min/avg/max/mdev = 43.645/43.709/43.829/0.199 ms ... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo }}} == IG-ST-3 IG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/KANSAS/IG-ST-3.rspec IG-ST-3.rspec]: {{{ $ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o 15:20:31 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 15:20:31 INFO : Reading slice IG-ST-3 credential... 15:20:32 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2014-11-25 20:06:43 UTC 15:20:32 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 15:20:32 INFO : Calling SCS... 15:20:36 INFO : Multi-AM reservation will include resources from these aggregates: 15:20:36 INFO : 15:20:36 INFO : 15:20:36 INFO : 15:20:36 INFO : 15:20:36 INFO : 15:20:36 INFO : Stitcher doing createsliver at ... 15:20:57 INFO : ... Allocation at complete. 15:20:57 INFO : Stitcher doing createsliver at ... 15:21:20 INFO : ... Allocation at complete. 15:21:20 INFO : Stitcher doing createsliver at ... 15:21:37 INFO : ... Allocation at complete. 15:21:37 INFO : Stitcher doing createsliver at ... 15:21:42 INFO : ... Allocation at complete. 15:21:42 INFO : Stitcher doing createsliver at ... 15:22:28 INFO : DCN AM : must wait for status ready.... 15:22:28 INFO : Pausing 30 seconds to let circuit become ready... 15:23:05 INFO : Pausing 30 seconds to let circuit become ready... 15:23:43 INFO : DCN circuit 139321 is ready at 15:23:43 INFO : DCN circuit 139311 is ready at 15:23:50 INFO : ... Allocation at complete. 15:23:50 INFO : All aggregates are complete. 15:23:50 INFO : Your resources expire at 2014-11-24T20:10:36 (UTC). 15:23:50 INFO : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/Kansas/IG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the KANSAS host: {{{ $ readyToLogin.py IG-ST-3 -a kansas-ig .... ig-kans's geni_status is: ready User lnevers logs in to ig-kans using: ssh -p 30010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.ku.gpeni.net }}} Login to the KANSAS host and ping each remote: {{{ #ping GPO IG [lnevers@ig-kans ~]$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59094ms rtt min/avg/max/mdev = 43.647/43.702/43.818/0.119 ms # UKYPKS2 IG [lnevers@ig-kans ~]$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59109ms rtt min/avg/max/mdev = 42.696/42.756/42.828/0.229 ms }}} == IG-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/KANSAS/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG. {{{ $ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o 15:45:28 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 15:45:28 INFO : Reading slice IG-ST-4 credential... 15:45:29 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2014-11-25 20:45:27 UTC 15:45:29 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 15:45:29 INFO : Calling SCS... 15:45:30 INFO : Multi-AM reservation will include resources from these aggregates: 15:45:30 INFO : 15:45:30 INFO : 15:45:30 INFO : 15:45:30 INFO : 15:45:30 INFO : Stitcher doing createsliver at ... 15:45:46 INFO : ... Allocation at complete. 15:45:46 INFO : Stitcher doing createsliver at ... 15:46:04 INFO : ... Allocation at complete. 15:46:04 INFO : Stitcher doing createsliver at ... 15:46:08 INFO : ... Allocation at complete. 15:46:08 INFO : Stitcher doing createsliver at ... 15:46:53 INFO : DCN AM : must wait for status ready.... 15:46:53 INFO : Pausing 30 seconds to let circuit become ready... 15:47:32 INFO : DCN circuit 139351 is ready at 15:47:39 INFO : ... Allocation at complete. 15:47:39 INFO : All aggregates are complete. 15:47:39 INFO : Your resources expire at 2014-11-24T20:35:30 (UTC). 15:47:39 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Kansas/IG-ST-4-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each KANSAS and GPO aggregate: {{{ $ readyToLogin.py IG-ST-4 -a kansas-ig .... ig-kans's geni_status is: ready User lnevers logs in to ig-kans using: ssh -p 30010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.ku.gpeni.net $ readyToLogin.py IG-ST-4 -a gpo-eg .... eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.62 }}} === Measurements === '''Iperf ExoGENI GPO VM to InstaGENI KANSAS VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2014-11-18'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 329 MBytes 45.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.1 sec 141 MBytes 19.7 Mbits/sec [ 5] 0.0-60.1 sec 141 MBytes 19.6 Mbits/sec [ 7] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec [ 6] 0.0-60.1 sec 141 MBytes 19.6 Mbits/sec [ 3] 0.0-60.1 sec 140 MBytes 19.5 Mbits/sec [SUM] 0.0-60.1 sec 701 MBytes 97.8 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 8] 0.0-60.1 sec 69.6 MBytes 9.72 Mbits/sec [ 7] 0.0-60.1 sec 68.8 MBytes 9.59 Mbits/sec [ 4] 0.0-60.1 sec 67.4 MBytes 9.40 Mbits/sec [ 12] 0.0-60.2 sec 74.5 MBytes 10.4 Mbits/sec [ 5] 0.0-60.3 sec 69.2 MBytes 9.63 Mbits/sec [ 10] 0.0-60.3 sec 72.1 MBytes 10.0 Mbits/sec [ 3] 0.0-60.4 sec 70.6 MBytes 9.81 Mbits/sec [ 11] 0.0-60.4 sec 75.2 MBytes 10.4 Mbits/sec [ 6] 0.0-60.4 sec 70.5 MBytes 9.78 Mbits/sec [ 9] 0.0-60.4 sec 68.9 MBytes 9.56 Mbits/sec [SUM] 0.0-60.4 sec 707 MBytes 98.1 Mbits/sec }}} '''Iperf ExoGENI GPO VM to InstaGENI KANSAS VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512818 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 682 MBytes 95.1 Mbits/sec 0.081 ms 26431/512817 (5.2%) [ 3] 0.0-60.1 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI GPO VM to the InstaGENI KANSAS VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59091ms rtt min/avg/max/mdev = 44.350/44.526/46.399/0.400 ms }}} '''Iperf InstaGENI KANSAS VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-11-18'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 498 MBytes 69.6 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.0 sec 113 MBytes 15.7 Mbits/sec [ 7] 0.0-60.1 sec 163 MBytes 22.8 Mbits/sec [ 5] 0.0-60.1 sec 125 MBytes 17.5 Mbits/sec [ 6] 0.0-60.2 sec 122 MBytes 17.1 Mbits/sec [ 3] 0.0-60.6 sec 165 MBytes 22.8 Mbits/sec [SUM] 0.0-60.6 sec 688 MBytes 95.2 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 11] 0.0-60.0 sec 117 MBytes 16.4 Mbits/sec [ 3] 0.0-60.0 sec 59.8 MBytes 8.35 Mbits/sec [ 12] 0.0-60.1 sec 56.2 MBytes 7.85 Mbits/sec [ 9] 0.0-60.1 sec 87.9 MBytes 12.3 Mbits/sec [ 4] 0.0-60.2 sec 48.9 MBytes 6.81 Mbits/sec [ 7] 0.0-60.2 sec 58.2 MBytes 8.12 Mbits/sec [ 8] 0.0-60.2 sec 67.6 MBytes 9.42 Mbits/sec [ 5] 0.0-60.3 sec 105 MBytes 14.6 Mbits/sec [ 10] 0.0-60.3 sec 54.8 MBytes 7.62 Mbits/sec [ 6] 0.0-60.3 sec 56.8 MBytes 7.89 Mbits/sec [SUM] 0.0-60.3 sec 712 MBytes 99.0 Mbits/sec }}} '''Iperf InstaGENI KANSAS VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512806 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 694 MBytes 97.0 Mbits/sec 0.139 ms 17957/512805 (3.5%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI KANSAS VM to ExoGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59095ms rtt min/avg/max/mdev = 44.235/44.501/46.679/0.394 ms }}} == IG-ST-5 Site Information == Various pages include stitching information for a site. Each of the following were verified for this site: 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/KansasInstaGENI#GENINetworkStitching KANSAS Aggregate] page. 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs]. 3. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found. 4. Add site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. == IG-ST-6 New Site !OpenFlow topology == Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/KANSAS/IG-ST-6.rspec IG-ST-6.rspec]: {{{ $ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o 16:17:06 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf 16:17:07 INFO : Reading slice IG-ST-6 credential... 16:17:07 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2014-11-25 21:17:06 UTC 16:17:07 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 16:17:07 INFO : Calling SCS... 16:17:08 INFO : Multi-AM reservation will include resources from these aggregates: 16:17:08 INFO : 16:17:08 INFO : 16:17:08 INFO : 16:17:08 INFO : 16:17:08 INFO : Stitcher doing createsliver at ... 16:17:24 INFO : ... Allocation at complete. 16:17:24 INFO : Stitcher doing createsliver at ... 16:17:39 INFO : ... Allocation at complete. 16:17:40 INFO : Stitcher doing createsliver at ... 16:17:44 INFO : ... Allocation at complete. 16:17:44 INFO : Stitcher doing createsliver at ... 16:18:29 INFO : DCN AM : must wait for status ready.... 16:18:29 INFO : Pausing 30 seconds to let circuit become ready... 16:19:07 INFO : DCN circuit 139401 is ready at 16:19:14 INFO : ... Allocation at complete. 16:19:14 INFO : All aggregates are complete. 16:19:14 INFO : Your resources expire at 2014-11-24T21:07:08 (UTC). 16:19:14 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Kansas/IG-ST-6-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-6 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each KANSAS and GPO aggregate: {{{ $ readyToLogin.py IG-ST-6 -a kansas-ig .... ig-kans's geni_status is: ready User lnevers logs in to ig-kans using: ssh -p 30010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.ku.gpeni.net $ readyToLogin.py IG-ST-6 -a gpo-ig .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 36666 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI KANSAS VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-11-18'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 139 MBytes 19.3 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-61.0 sec 28.2 MBytes 3.89 Mbits/sec [ 5] 0.0-61.1 sec 28.0 MBytes 3.85 Mbits/sec [ 4] 0.0-61.2 sec 22.2 MBytes 3.05 Mbits/sec [ 3] 0.0-61.3 sec 34.0 MBytes 4.65 Mbits/sec [ 7] 0.0-61.7 sec 26.6 MBytes 3.62 Mbits/sec [SUM] 0.0-61.7 sec 139 MBytes 18.9 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.0 sec 10.5 MBytes 1.47 Mbits/sec [ 3] 0.0-60.3 sec 17.4 MBytes 2.42 Mbits/sec [ 9] 0.0-60.8 sec 17.2 MBytes 2.38 Mbits/sec [ 6] 0.0-60.9 sec 16.1 MBytes 2.22 Mbits/sec [ 10] 0.0-61.0 sec 9.88 MBytes 1.36 Mbits/sec [ 11] 0.0-61.4 sec 8.62 MBytes 1.18 Mbits/sec [ 12] 0.0-61.5 sec 13.0 MBytes 1.77 Mbits/sec [ 7] 0.0-61.7 sec 16.5 MBytes 2.25 Mbits/sec [ 8] 0.0-62.3 sec 17.4 MBytes 2.34 Mbits/sec [ 5] 0.0-62.9 sec 18.9 MBytes 2.52 Mbits/sec [SUM] 0.0-62.9 sec 146 MBytes 19.4 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI KANSAS VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512811 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.3 Mbits/sec 13.095 ms 413810/512808 (81%) [ 3] 0.0-60.2 sec 82 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to InstaGENI KANSAS VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59090ms rtt min/avg/max/mdev = 44.030/54.880/201.171/36.172 ms }}} '''Iperf InstaGENI KANSAS VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-11-18'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-62.2 sec 139 MBytes 18.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-59.8 sec 30.0 MBytes 4.21 Mbits/sec [ 7] 0.0-60.2 sec 28.1 MBytes 3.92 Mbits/sec [ 5] 0.0-60.4 sec 27.8 MBytes 3.85 Mbits/sec [ 6] 0.0-60.8 sec 28.9 MBytes 3.98 Mbits/sec [ 3] 0.0-61.2 sec 27.5 MBytes 3.77 Mbits/sec [SUM] 0.0-61.2 sec 142 MBytes 19.5 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 10] 0.0-60.1 sec 16.9 MBytes 2.35 Mbits/sec [ 8] 0.0-60.2 sec 19.4 MBytes 2.70 Mbits/sec [ 5] 0.0-60.3 sec 15.0 MBytes 2.09 Mbits/sec [ 12] 0.0-60.6 sec 15.6 MBytes 2.16 Mbits/sec [ 11] 0.0-60.8 sec 13.2 MBytes 1.83 Mbits/sec [ 9] 0.0-61.2 sec 10.6 MBytes 1.46 Mbits/sec [ 3] 0.0-62.0 sec 15.9 MBytes 2.15 Mbits/sec [ 4] 0.0-62.0 sec 13.8 MBytes 1.86 Mbits/sec [ 7] 0.0-62.2 sec 14.1 MBytes 1.90 Mbits/sec [ 6] 0.0-62.8 sec 11.5 MBytes 1.54 Mbits/sec [SUM] 0.0-62.8 sec 146 MBytes 19.5 Mbits/sec }}} '''Iperf InstaGENI KANSAS VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512802 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 10.110 ms 413758/512801 (81%) [ 3] 0.0-60.2 sec 75 datagrams received out-of-order }}} '''Ping from InstaGENI KANSAS VM to InstaGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59089ms rtt min/avg/max/mdev = 44.173/52.473/225.120/29.890 ms }}} ------ {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}