| Version 11 (modified by , 7 years ago) (diff) |
|---|
University of Hawaii Stitching Confirmation Tests
This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.
IG-ST-1 New Site to GPO IG topology
The HAWAII site advertises the following stitching details:
<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2017-04-19T16:35:52Z" >
<aggregate id="urn:publicid:IDN+instageni.hawaii.edu+authority+cm" url="https://www.instageni.hawaii.edu:12369/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
<start type="time">2017-04-19T16:35:52Z</start>
<end type="time">2017-04-19T16:35:52Z</end>
</lifetime>
<node id="urn:publicid:IDN+instageni.hawaii.edu+node+procurve2">
<port id="urn:publicid:IDN+instageni.hawaii.edu+stitchport+procurve2:1.24.al2s">
<capacity>1000000</capacity>
<maximumReservableCapacity>1000000</maximumReservableCapacity>
<minimumReservableCapacity>1000</minimumReservableCapacity>
<granularity>1</granularity>
<link id="urn:publicid:IDN+instageni.hawaii.edu+interface+procurve2:1.24.al2s">
<remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+rtsw.losa.net.internet2.edu:et-2/3/0.0:hawaii-ig</remoteLinkId>
<trafficEngineeringMetric>10</trafficEngineeringMetric>
<capacity>1000000</capacity>
<maximumReservableCapacity>1000000</maximumReservableCapacity>
<minimumReservableCapacity>1000</minimumReservableCapacity>
<granularity>1</granularity>
<switchingCapabilityDescriptor>
<switchingcapType>l2sc</switchingcapType>
<encodingType>ethernet</encodingType>
<switchingCapabilitySpecificInfo>
<switchingCapabilitySpecificInfo_L2sc>
<interfaceMTU>1500</interfaceMTU>
<vlanRangeAvailability>1700-1719</vlanRangeAvailability>
<vlanTranslation>false</vlanTranslation>
</switchingCapabilitySpecificInfo_L2sc>
</switchingCapabilitySpecificInfo>
</switchingCapabilityDescriptor>
</link>
</port>
</node>
</aggregate>
</stitching>
Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.
Create a slice and then create the stitched slivers with the RSpec IG-ST-1.rspec:
$ stitcher.py createsliver IG-ST-1 IG-ST-1.rspec -o 12:37:06 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 12:37:06 INFO : Reading slice IG-ST-1 credential... 12:37:06 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2017-04-26 16:36:55 UTC 12:37:06 INFO : Calling SCS... 12:37:12 INFO : Multi-AM reservation will include resources from these aggregates: 12:37:12 INFO : <Aggregate gpo-ig> 12:37:12 INFO : <Aggregate al2s> 12:37:12 INFO : <Aggregate hawaii-ig> 12:37:12 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... 12:37:41 INFO : ... Allocation at <Aggregate gpo-ig> complete. 12:37:41 INFO : Stitcher doing createsliver at <Aggregate hawaii-ig>... 12:38:03 INFO : ... Allocation at <Aggregate hawaii-ig> complete. 12:38:03 INFO : Stitcher doing createsliver at <Aggregate al2s>... 12:38:12 INFO : ... Allocation at <Aggregate al2s> complete. 12:38:12 INFO : All aggregates are complete. 12:38:12 INFO : Your resources expire at 2017-04-25T16:27:12 (UTC). 12:38:12 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/HAWAII/IG-ST-1-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
Determined login information at each HAWAII and GPO aggregate:
$ readyToLogin.py IG-ST-1 --useSliceAggregates ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 25426 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com ig-ha's geni_status is: ready User lnevers logs in to ig-ha using: ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.hawaii.edu
Measurements
Iperf InstaGENI GPO VM to InstaGENI HAWAII VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2017-04-19
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 423 MBytes 59.0 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 5] 0.0-60.1 sec 240 MBytes 33.5 Mbits/sec [ 4] 0.0-60.2 sec 106 MBytes 14.7 Mbits/sec [ 3] 0.0-60.3 sec 104 MBytes 14.5 Mbits/sec [ 6] 0.0-60.4 sec 80.0 MBytes 11.1 Mbits/sec [ 7] 0.0-60.5 sec 93.1 MBytes 12.9 Mbits/sec [SUM] 0.0-60.5 sec 623 MBytes 86.4 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 57.1 MBytes 7.97 Mbits/sec [ 7] 0.0-60.3 sec 62.8 MBytes 8.74 Mbits/sec [ 9] 0.0-60.3 sec 65.6 MBytes 9.13 Mbits/sec [ 4] 0.0-60.3 sec 95.2 MBytes 13.2 Mbits/sec [ 12] 0.0-60.3 sec 62.8 MBytes 8.72 Mbits/sec [ 10] 0.0-60.4 sec 43.6 MBytes 6.06 Mbits/sec [ 11] 0.0-60.4 sec 46.1 MBytes 6.40 Mbits/sec [ 6] 0.0-60.6 sec 42.6 MBytes 5.90 Mbits/sec [ 8] 0.0-60.6 sec 76.0 MBytes 10.5 Mbits/sec [ 5] 0.0-60.8 sec 116 MBytes 16.0 Mbits/sec [SUM] 0.0-60.8 sec 668 MBytes 92.2 Mbits/sec
Iperf InstaGENI GPO VM to InstaGENI HAWAII VM (UDP) - UDP buffer size: 208 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512802 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 682 MBytes 95.4 Mbits/sec 0.094 ms 26233/512801 (5.1%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order
Ping from InstaGENI GPO VM to the InstaGENI HAWAII VM
60 packets transmitted, 60 received, 0% packet loss, time 59087ms rtt min/avg/max/mdev = 119.686/120.010/121.539/0.327 ms
Iperf InstaGENI HAWAII VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2017-04-19
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 323 MBytes 45.2 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 97.2 MBytes 13.6 Mbits/sec [ 6] 0.0-60.1 sec 101 MBytes 14.1 Mbits/sec [ 5] 0.0-60.1 sec 269 MBytes 37.6 Mbits/sec [ 4] 0.0-60.2 sec 79.9 MBytes 11.1 Mbits/sec [ 7] 0.0-60.3 sec 49.1 MBytes 6.84 Mbits/sec [SUM] 0.0-60.3 sec 596 MBytes 83.0 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 10] 0.0-60.1 sec 57.1 MBytes 7.97 Mbits/sec [ 11] 0.0-60.1 sec 59.8 MBytes 8.34 Mbits/sec [ 4] 0.0-60.2 sec 86.5 MBytes 12.1 Mbits/sec [ 5] 0.0-60.2 sec 85.5 MBytes 11.9 Mbits/sec [ 12] 0.0-60.2 sec 44.9 MBytes 6.25 Mbits/sec [ 6] 0.0-60.2 sec 74.2 MBytes 10.3 Mbits/sec [ 3] 0.0-60.3 sec 62.1 MBytes 8.64 Mbits/sec [ 8] 0.0-60.3 sec 48.5 MBytes 6.74 Mbits/sec [ 9] 0.0-60.4 sec 43.0 MBytes 5.97 Mbits/sec [ 7] 0.0-60.6 sec 57.4 MBytes 7.95 Mbits/sec [SUM] 0.0-60.6 sec 619 MBytes 85.7 Mbits/sec
Iperf InstaGENI HAWAII VM to GPO InstaGENI VM (UDP) - UDP buffer size: 208 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512796 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 688 MBytes 96.0 Mbits/sec 0.097 ms 21862/512795 (4.3%) [ 3] 0.0-60.1 sec 1 datagrams received out-of-order
Ping from InstaGENI HAWAII VM to GPO InstaGENI VM
60 packets transmitted, 60 received, 0% packet loss, time 59098ms rtt min/avg/max/mdev = 119.660/119.880/120.292/0.288 ms
IG-ST-2 New Site to GPO IG Loop topology
Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:
$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o 12:50:36 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 12:50:36 INFO : Reading slice IG-ST-2 credential... 12:50:37 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2017-04-26 16:50:30 UTC 12:50:37 INFO : Calling SCS... 12:50:37 INFO : Multi-AM reservation will include resources from these aggregates: 12:50:37 INFO : <Aggregate gpo-ig> 12:50:37 INFO : <Aggregate al2s> 12:50:37 INFO : <Aggregate hawaii-ig> 12:50:38 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... 12:50:58 INFO : ... Allocation at <Aggregate gpo-ig> complete. 12:50:58 INFO : Stitcher doing createsliver at <Aggregate hawaii-ig>... 12:51:20 INFO : ... Allocation at <Aggregate hawaii-ig> complete. 12:51:20 INFO : Stitcher doing createsliver at <Aggregate al2s>... 12:51:34 INFO : ... Allocation at <Aggregate al2s> complete. 12:51:34 INFO : All aggregates are complete. 12:51:34 INFO : Your resources expire at 2017-04-25T16:40:38 (UTC). 12:51:34 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/HAWAII/IG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
Determined login information at each HAWAII and GPO aggregate:
$ readyToLogin.py IG-ST-2 --useSliceAggregates
Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:
remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" lnevers@scorpia:~/geni-tools-2.10/stitch-test/HAWAII$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" 1. Find login Info for hosts in slice IG-ST-2 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59080ms rtt min/avg/max/mdev = 119.729/122.045/240.811/15.472 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59077ms rtt min/avg/max/mdev = 119.795/122.181/242.575/15.700 ms ... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo
IG-ST-3 IG-ST-3 New Site 3 node linear topology
Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:
$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o 10:57:22 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 10:57:22 INFO : Reading slice IG-ST-3 credential... 10:57:22 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2017-04-26 16:52:47 UTC 10:57:22 INFO : Calling SCS... 10:57:23 INFO : Multi-AM reservation will include resources from these aggregates: 10:57:23 INFO : <Aggregate uwashington-ig> 10:57:23 INFO : <Aggregate gpo-ig> 10:57:23 INFO : <Aggregate al2s> 10:57:23 INFO : <Aggregate hawaii-ig> 10:57:23 INFO : Stitcher doing createsliver at <Aggregate uwashington-ig>... 10:57:44 INFO : ... Allocation at <Aggregate uwashington-ig> complete. 10:57:44 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... 10:58:11 INFO : ... Allocation at <Aggregate gpo-ig> complete. 10:58:11 INFO : Stitcher doing createsliver at <Aggregate hawaii-ig>... 10:58:31 INFO : ... Allocation at <Aggregate hawaii-ig> complete. 10:58:31 INFO : Stitcher doing createsliver at <Aggregate al2s>... 10:58:45 INFO : ... Allocation at <Aggregate al2s> complete. 10:58:45 INFO : All aggregates are complete. 10:58:45 INFO : Your resources expire at 2017-04-26T14:47:23 (UTC). 10:58:45 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/HAWAII/IG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
Determined login information the HAWAII host:
$ readyToLogin.py IG-ST-3 --useSliceAggregates ig-gpo's geni_status is: changing User lnevers logs in to ig-gpo using: ssh -p 25426 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com ig-ha's geni_status is: ready User lnevers logs in to ig-ha using: ssh -p 25042 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.hawaii.edu ig-wash's geni_status is: ready User lnevers logs in to ig-wash using: ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.washington.edu
Login to the HAWAII host and ping each remote:
#ping GPO IG lnevers@ig-hawaii:~$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59091ms rtt min/avg/max/mdev = 119.728/119.900/120.039/0.212 ms # Washington IG lnevers@ig-hawaii:~$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59075ms rtt min/avg/max/mdev = 73.056/73.212/73.541/0.186 ms
IG-ST-4 New Site to GPO EG interoperability
Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.
$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o
11:08:55 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
11:08:55 INFO : Reading slice IG-ST-4 credential...
11:08:55 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2017-04-27 15:08:54 UTC
11:08:55 INFO : Calling SCS...
11:08:55 INFO : Multi-AM reservation will include resources from these aggregates:
11:08:55 INFO : <Aggregate hawaii-ig>
11:08:55 INFO : <Aggregate al2s>
11:08:55 INFO : <Aggregate gpo-eg>
11:08:55 INFO : Stitcher doing createsliver at <Aggregate hawaii-ig>...
11:09:14 INFO : ... Allocation at <Aggregate hawaii-ig> complete.
11:09:14 INFO : Stitcher doing createsliver at <Aggregate gpo-eg>...
11:09:24 INFO : ... Allocation at <Aggregate gpo-eg> complete.
11:09:24 INFO : Stitcher doing createsliver at <Aggregate al2s>...
11:09:26 ERROR : {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3739', 'code': {'geni_code': 24}}
11:09:26 WARNING : Stitching failed but will retry: Circuit reservation failed at <Aggregate al2s>. Try again from the SCS. (Error: Topology too complex for local redo - ask Stitching Service to find a VLAN tag (AMAPIError: Error from Aggregate: code 24: Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3739.))
11:09:26 INFO : Deleting existing reservations...
11:09:26 INFO : Doing deletesliver at <Aggregate hawaii-ig>...
11:09:29 INFO : Deleted reservation at <Aggregate hawaii-ig>.
11:09:29 INFO : Doing deletesliver at <Aggregate gpo-eg>...
11:09:32 INFO : Deleted reservation at <Aggregate gpo-eg>.
11:09:32 INFO : Calling SCS for the 2nd time...
11:09:33 INFO : Pausing for 30 seconds for Aggregates to free up resources...
11:10:03 INFO : Multi-AM reservation will include resources from these aggregates:
11:10:03 INFO : <Aggregate hawaii-ig>
11:10:03 INFO : <Aggregate al2s>
11:10:03 INFO : <Aggregate gpo-eg>
11:10:03 INFO : Stitcher doing createsliver at <Aggregate hawaii-ig>...
11:10:46 INFO : ... Allocation at <Aggregate hawaii-ig> complete.
11:10:46 INFO : Stitcher doing createsliver at <Aggregate gpo-eg>...
11:10:55 INFO : ... Allocation at <Aggregate gpo-eg> complete.
11:10:55 INFO : Stitcher doing createsliver at <Aggregate al2s>...
11:11:04 INFO : ... Allocation at <Aggregate al2s> complete.
11:11:04 INFO : All aggregates are complete.
11:11:04 INFO : Your resources expire at 2017-04-26T15:00:03 (UTC).
11:11:04 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/HAWAII/IG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
Determined login information at each HAWAII and GPO aggregate:
$ readyToLogin.py IG-ST-4 --useSliceAggregates eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.11 ig-ha's geni_status is: ready User lnevers logs in to ig-ha using: ssh -p 25042 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.hawaii.edu
Measurements
Iperf ExoGENI GPO VM to InstaGENI HAWAII VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2017-04-20
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 136 MBytes 19.0 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 5] 0.0-60.0 sec 25.6 MBytes 3.58 Mbits/sec [ 4] 0.0-60.1 sec 31.8 MBytes 4.43 Mbits/sec [ 6] 0.0-60.2 sec 27.5 MBytes 3.83 Mbits/sec [ 3] 0.0-60.7 sec 26.1 MBytes 3.61 Mbits/sec [ 7] 0.0-60.8 sec 28.2 MBytes 3.90 Mbits/sec [SUM] 0.0-60.8 sec 139 MBytes 19.2 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 12] 0.0-60.4 sec 11.2 MBytes 1.56 Mbits/sec [ 5] 0.0-60.6 sec 12.5 MBytes 1.73 Mbits/sec [ 6] 0.0-60.6 sec 16.1 MBytes 2.23 Mbits/sec [ 7] 0.0-60.7 sec 17.9 MBytes 2.47 Mbits/sec [ 9] 0.0-60.7 sec 11.8 MBytes 1.62 Mbits/sec [ 10] 0.0-60.8 sec 16.8 MBytes 2.31 Mbits/sec [ 3] 0.0-60.9 sec 11.9 MBytes 1.64 Mbits/sec [ 4] 0.0-61.1 sec 20.9 MBytes 2.87 Mbits/sec [ 8] 0.0-61.2 sec 13.6 MBytes 1.87 Mbits/sec [ 11] 0.0-61.9 sec 9.25 MBytes 1.25 Mbits/sec [SUM] 0.0-61.9 sec 142 MBytes 19.2 Mbits/sec
Iperf ExoGENI GPO VM to InstaGENI HAWAII VM (UDP) - UDP buffer size: 208 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.5 sec 140 MBytes 19.4 Mbits/sec 0.046 ms 412772/512818 (80%) [ 3] 0.0-60.5 sec 1 datagrams received out-of-order
Ping from ExoGENI GPO VM to the InstaGENI HAWAII VM
60 packets transmitted, 60 received, 0% packet loss, time 59105ms rtt min/avg/max/mdev = 119.572/119.789/120.804/0.202 ms
Iperf InstaGENI HAWAII VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)
Collected: 2017-04-20
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 128 MBytes 17.8 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 3] 0.0-59.1 sec 27.1 MBytes 3.85 Mbits/sec [ 7] 0.0-59.1 sec 21.9 MBytes 3.11 Mbits/sec [ 6] 0.0-60.0 sec 26.5 MBytes 3.70 Mbits/sec [ 4] 0.0-60.1 sec 26.1 MBytes 3.64 Mbits/sec [ 5] 0.0-60.9 sec 36.6 MBytes 5.04 Mbits/sec [SUM] 0.0-60.9 sec 138 MBytes 19.0 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 5] 0.0-60.1 sec 15.9 MBytes 2.21 Mbits/sec [ 3] 0.0-60.6 sec 14.1 MBytes 1.96 Mbits/sec [ 12] 0.0-60.7 sec 9.38 MBytes 1.30 Mbits/sec [ 9] 0.0-60.7 sec 14.6 MBytes 2.02 Mbits/sec [ 11] 0.0-60.7 sec 14.2 MBytes 1.97 Mbits/sec [ 6] 0.0-60.8 sec 15.4 MBytes 2.12 Mbits/sec [ 10] 0.0-60.8 sec 13.8 MBytes 1.90 Mbits/sec [ 8] 0.0-61.1 sec 13.9 MBytes 1.91 Mbits/sec [ 4] 0.0-61.5 sec 15.8 MBytes 2.15 Mbits/sec [ 7] 0.0-61.7 sec 13.2 MBytes 1.80 Mbits/sec [SUM] 0.0-61.7 sec 140 MBytes 19.1 Mbits/sec
Iperf InstaGENI HAWAII VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 100 Mbits/sec [ 3] Sent 512633 datagrams [ 3] Server Report: [ 3] 0.0-59.8 sec 138 MBytes 19.4 Mbits/sec 14.506 ms 414092/512629 (81%) [ 3] 0.0-59.8 sec 1 datagrams received out-of-order
Ping from InstaGENI HAWAII VM to ExoGENI GPO VM
60 packets transmitted, 60 received, 0% packet loss, time 59109ms rtt min/avg/max/mdev = 119.645/119.859/120.807/0.457 ms
IG-ST-5 Site Information
Various pages include stitching information for a site. Each of the following were verified for this site:
- Verified that stitching VLANs and Device URN information exist in the HAWAII Aggregate page.
- Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs. - Incorrectly AM URL, updated GST#6249. TODO
- Stitching Computation Service logs were reviewed while testing stitching to this site, No longer possible.
- TODO. Add site to the list of GENI Network Stitching Sites. TODO
IG-ST-6 New Site OpenFlow topology
Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:
$ stitcher.py createsliver IG-ST-6a IG-ST-6.rspec -o 09:16:39 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 09:16:39 INFO : Reading slice IG-ST-6 credential... 09:16:40 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2017-05-01 18:24:36 UTC 09:16:40 INFO : Calling SCS... 09:16:40 INFO : Multi-AM reservation will include resources from these aggregates: 09:16:40 INFO : <Aggregate nysernet-ig> 09:16:40 INFO : <Aggregate al2s> 09:16:40 INFO : <Aggregate hawaii-ig> 09:16:40 INFO : Stitcher doing createsliver at <Aggregate nysernet-ig>... 09:17:03 INFO : ... Allocation at <Aggregate nysernet-ig> complete. 09:17:03 INFO : Stitcher doing createsliver at <Aggregate hawaii-ig>... 09:17:29 INFO : ... Allocation at <Aggregate hawaii-ig> complete. 09:17:29 INFO : Stitcher doing createsliver at <Aggregate al2s>... 09:17:36 INFO : ... Allocation at <Aggregate al2s> complete. 09:17:36 INFO : All aggregates are complete. 09:17:36 INFO : Your resources expire at 2017-05-01T13:06:40 (UTC). 09:17:36 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/HAWAII/IG-ST-6-manifest-rspec-multiam-combined.xml'
Determined login information at each HAWAII and GPO aggregate:
$ readyToLogin.py IG-ST-6a --useSliceAggregates ig-nyse's geni_status is: ready User lnevers logs in to ig-nyse using: ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.nysernet.org ig-ha's geni_status is: ready User lnevers logs in to ig-ha using: ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.hawaii.edu
Measurements
Iperf InstaGENI NYSERNet VM to InstaGENI HAWAII VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2017-04-26
One Client
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 364 MBytes 50.8 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 87.1 MBytes 12.2 Mbits/sec [ 5] 0.0-60.2 sec 304 MBytes 42.3 Mbits/sec [ 4] 0.0-60.3 sec 46.6 MBytes 6.49 Mbits/sec [ 3] 0.0-60.4 sec 67.5 MBytes 9.38 Mbits/sec [ 6] 0.0-60.5 sec 93.6 MBytes 13.0 Mbits/sec [SUM] 0.0-60.5 sec 599 MBytes 83.1 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 5] 0.0-59.8 sec 75.9 MBytes 10.6 Mbits/sec [ 4] 0.0-59.9 sec 82.6 MBytes 11.6 Mbits/sec [ 7] 0.0-60.0 sec 63.6 MBytes 8.90 Mbits/sec [ 3] 0.0-60.0 sec 60.5 MBytes 8.46 Mbits/sec [ 12] 0.0-60.1 sec 66.0 MBytes 9.21 Mbits/sec [ 6] 0.0-60.1 sec 59.0 MBytes 8.23 Mbits/sec [ 9] 0.0-60.2 sec 47.1 MBytes 6.57 Mbits/sec [ 10] 0.0-60.3 sec 55.0 MBytes 7.65 Mbits/sec [ 8] 0.0-60.3 sec 56.2 MBytes 7.82 Mbits/sec [ 11] 0.0-60.3 sec 60.1 MBytes 8.36 Mbits/sec [SUM] 0.0-60.3 sec 626 MBytes 87.1 Mbits/sec
Iperf InstaGENI NYSERNet VM to InstaGENI HAWAII VM (UDP) - UDP buffer size: 208 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512801 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 666 MBytes 93.0 Mbits/sec 7.518 ms 37442/512800 (7.3%) [ 3] 0.0-60.1 sec 26 datagrams received out-of-order
Ping from InstaGENI NYSERNet VM to InstaGENI HAWAII VM
60 packets transmitted, 60 received, 0% packet loss, time 59073ms rtt min/avg/max/mdev = 120.718/123.484/271.113/19.225 ms
Iperf InstaGENI HAWAII VM to InstaGENI NYSERNet VM (TCP) - TCP window size: 85.0 KByte (default)
Collected: 2017-04-26
One Client_
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 420 MBytes 58.5 Mbits/sec
Five Clients
[ ID] Interval Transfer Bandwidth [ 6] 0.0-60.1 sec 154 MBytes 21.4 Mbits/sec [ 5] 0.0-60.2 sec 116 MBytes 16.2 Mbits/sec [ 4] 0.0-60.2 sec 77.9 MBytes 10.8 Mbits/sec [ 3] 0.0-60.3 sec 154 MBytes 21.4 Mbits/sec [ 7] 0.0-60.3 sec 110 MBytes 15.3 Mbits/sec [SUM] 0.0-60.3 sec 612 MBytes 85.1 Mbits/sec
Ten Clients
[ ID] Interval Transfer Bandwidth [ 8] 0.0-60.0 sec 0.00 (null)s 2459300272064687104 Bytes/sec [ 3] 0.0-60.1 sec 73.8 MBytes 10.3 Mbits/sec [ 4] 0.0-60.2 sec 75.4 MBytes 10.5 Mbits/sec [ 6] 0.0-60.3 sec 82.1 MBytes 11.4 Mbits/sec [ 12] 0.0-60.4 sec 92.0 MBytes 12.8 Mbits/sec [ 9] 0.0-60.4 sec 60.2 MBytes 8.37 Mbits/sec [ 11] 0.0-60.4 sec 55.9 MBytes 7.76 Mbits/sec [ 5] 0.0-60.4 sec 60.1 MBytes 8.34 Mbits/sec [ 10] 0.0-60.5 sec 69.1 MBytes 9.59 Mbits/sec [ 7] 0.0-60.5 sec 64.8 MBytes 8.97 Mbits/sec [SUM] 0.0-60.5 sec 630 MBytes 87.2 Mbits/sec
Iperf InstaGENI HAWAII VM to InstaGENI NYSERNet VM (UDP) - UDP buffer size: 208 KByte (default)
[ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512772 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 681 MBytes 95.3 Mbits/sec 0.115 ms 27138/512771 (5.3%) [ 3] 0.0-60.0 sec 14 datagrams received out-of-order
Ping from InstaGENI HAWAII VM to InstaGENI NYSERNet VM
60 packets transmitted, 60 received, 0% packet loss, time 59070ms rtt min/avg/max/mdev = 120.671/123.530/269.695/19.030 ms
Email help@geni.net for GENI support or email me with feedback on this page!
