[[PageOutline]] = George Washington University Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == EG-ST-1 New Site to GPO IG topology == The GWU site advertises the following stitching details for the connection to AL2S. {{{ }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/GWU/EG-ST-1.rspec EG-ST-1.rspec]: {{{ omni.py createslice EG-ST-1 stitcher.py createsliver EG-ST-1 EG-ST-1.rspec -o }}} Determined login information at each GWU EG and GPO IG aggregate: {{{ $ readyToLogin.py EG-ST-1 --useSliceAggregates .... }}} === Measurements === '''Iperf InstaGENI GPO VM to ExoGENI GWU VM (TCP) - TCP window size: 85.3 KByte (default)''' ''Collected: 2017-04-XX'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf InstaGENI GPO VM to ExoGENI GWU VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from InstaGENI GPO VM to the ExoGENI GWU VM ''' {{{ }}} '''Iperf ExoGENI GWU VM to GPO InstaGENI VM (TCP) - TCP window size: 85.3 KByte (default)''' ''Collected: 2017-04-XX'' __One Client_ {{{ }}} __Five Clients__ {{{ }}} __Ten Clients__ {{{ }}} '''Iperf ExoGENI GWU VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ }}} '''Ping from ExoGENI GWU VM to GPO InstaGENI VM ''' {{{ }}}