Version 4 (modified by 7 years ago) (diff) | ,
---|
George Washington University Stitching Confirmation Tests
This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.
EG-ST-1 New Site to GPO IG topology
The GWU site advertises the following stitching details for the connection to AL2S.
Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.
Create a slice and then create the stitched slivers with the RSpec EG-ST-1.rspec:
omni.py createslice EG-ST-1 stitcher.py createsliver EG-ST-1 EG-ST-1.rspec -o
Determined login information at each GWU EG and GPO IG aggregate:
$ readyToLogin.py EG-ST-1 --useSliceAggregates ....
Measurements
Iperf InstaGENI GPO VM to ExoGENI GWU VM (TCP) - TCP window size: 85.3 KByte (default)
Collected: 2017-04-XX
One Client_
Five Clients
Ten Clients
Iperf InstaGENI GPO VM to ExoGENI GWU VM (UDP) - UDP buffer size: 224 KByte (default)
Ping from InstaGENI GPO VM to the ExoGENI GWU VM
Iperf ExoGENI GWU VM to GPO InstaGENI VM (TCP) - TCP window size: 85.3 KByte (default)
Collected: 2017-04-XX
One Client_
Five Clients
Ten Clients
Iperf ExoGENI GWU VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)
Ping from ExoGENI GWU VM to GPO InstaGENI VM