[[PageOutline]] = University of Chicago Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == IG-ST-1 New Site to GPO IG topology == The Chicago site is an AL2S only site and advertises the following stitching details: {{{ protogeni chainANDTree false false 2014-09-18T18:17:36Z 2014-09-18T18:17:36Z 1000000 1000000 1000 1 urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.star.net.internet2.edu:eth7/1:uchicago-ig 10 1000000 1000000 1000 1 l2sc ethernet 1500 3075-3094 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Chicago/IG-ST-1-al2s.rspec IG-ST-1-al2s.rspec]: {{{ $ stitcher.py createsliver IG-ST-1 IG-ST-1-al2s.rspec -o 10:10:54 INFO : Configured logging from file /home/lnevers/gcf-2.7-rc2/src/gcf/stitcher_logging.conf 10:10:55 INFO : Reading slice IG-ST-1 credential... 10:10:56 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2014-10-02 19:30:02 UTC 10:10:56 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 10:10:56 INFO : Calling SCS... 10:11:00 INFO : Multi-AM reservation will include resources from these aggregates: 10:11:00 INFO : 10:11:00 INFO : 10:11:00 INFO : 10:11:00 INFO : 10:11:00 INFO : Stitcher doing createsliver at ... 10:11:20 INFO : ... Allocation at complete. 10:11:20 INFO : Stitcher doing createsliver at ... 10:11:35 INFO : ... Allocation at complete. 10:11:35 INFO : Stitcher doing createsliver at ... 10:11:39 INFO : ... Allocation at complete. 10:11:39 INFO : Stitcher doing createsliver at ... 10:12:25 INFO : DCN AM : must wait for status ready.... 10:12:25 INFO : Pausing 30 seconds to let circuit become ready... 10:13:03 INFO : DCN circuit 120141 is ready at 10:13:10 INFO : ... Allocation at complete. 10:13:10 INFO : All aggregates are complete. 10:13:10 INFO : Your resources expire at 2014-10-02T14:01:00 (UTC). 10:13:10 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Chicago/IG-ST-1-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each Chicago and GPO aggregate: {{{ $ readyToLogin.py IG-ST-1 -a chicago-ig .... ig-chic's geni_status is: ready User lnevers logs in to ig-chic using: ssh -p 30266 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.geni.uchicago.edu $ readyToLogin.py IG-ST-1 -a gpo-ig .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 36922 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI Chicago VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-09-29'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 142 MBytes 19.8 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.1 sec 27.8 MBytes 3.87 Mbits/sec [ 4] 0.0-60.1 sec 28.2 MBytes 3.94 Mbits/sec [ 6] 0.0-60.3 sec 30.9 MBytes 4.30 Mbits/sec [ 3] 0.0-60.4 sec 26.1 MBytes 3.63 Mbits/sec [ 5] 0.0-60.5 sec 31.4 MBytes 4.35 Mbits/sec [SUM] 0.0-60.5 sec 144 MBytes 20.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-59.7 sec 17.4 MBytes 2.44 Mbits/sec [ 4] 0.0-59.7 sec 9.75 MBytes 1.37 Mbits/sec [ 9] 0.0-60.8 sec 20.8 MBytes 2.86 Mbits/sec [ 5] 0.0-60.8 sec 12.9 MBytes 1.78 Mbits/sec [ 10] 0.0-60.9 sec 17.2 MBytes 2.38 Mbits/sec [ 8] 0.0-61.0 sec 10.5 MBytes 1.44 Mbits/sec [ 7] 0.0-61.1 sec 14.4 MBytes 1.97 Mbits/sec [ 11] 0.0-61.1 sec 11.8 MBytes 1.61 Mbits/sec [ 6] 0.0-61.3 sec 11.9 MBytes 1.63 Mbits/sec [ 12] 0.0-61.7 sec 20.4 MBytes 2.77 Mbits/sec [SUM] 0.0-61.7 sec 147 MBytes 20.0 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI Chicago VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512812 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 12.842 ms 413469/512811 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to InstaGENI Chicago VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59087ms rtt min/avg/max/mdev = 33.056/33.352/33.845/0.142 ms }}} '''Iperf InstaGENI Chicago VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-09-29'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 140 MBytes 19.5 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.1 sec 29.2 MBytes 4.08 Mbits/sec [ 4] 0.0-60.5 sec 37.0 MBytes 5.13 Mbits/sec [ 5] 0.0-60.6 sec 30.2 MBytes 4.19 Mbits/sec [ 6] 0.0-60.7 sec 26.4 MBytes 3.65 Mbits/sec [ 3] 0.0-60.8 sec 21.8 MBytes 3.00 Mbits/sec [SUM] 0.0-60.8 sec 145 MBytes 20.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 10] 0.0-60.0 sec 16.6 MBytes 2.32 Mbits/sec [ 3] 0.0-60.2 sec 11.9 MBytes 1.65 Mbits/sec [ 12] 0.0-60.3 sec 11.2 MBytes 1.56 Mbits/sec [ 6] 0.0-60.4 sec 17.1 MBytes 2.38 Mbits/sec [ 9] 0.0-60.8 sec 17.5 MBytes 2.42 Mbits/sec [ 8] 0.0-60.9 sec 13.9 MBytes 1.91 Mbits/sec [ 4] 0.0-61.0 sec 18.2 MBytes 2.51 Mbits/sec [ 7] 0.0-61.1 sec 15.5 MBytes 2.13 Mbits/sec [ 5] 0.0-61.7 sec 9.00 MBytes 1.22 Mbits/sec [ 11] 0.0-62.4 sec 16.0 MBytes 2.15 Mbits/sec [SUM] 0.0-62.4 sec 147 MBytes 19.8 Mbits/sec }}} '''Iperf InstaGENI Chicago VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 100 Mbits/sec [ 3] Sent 512753 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 14.514 ms 413397/512750 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI Chicago VM to InstaGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59086ms rtt min/avg/max/mdev = 33.113/33.383/35.543/0.363 ms }}} == IG-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Chicago/IG-ST-2.rspec IG-ST-2.rspec]: {{{ $ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o 10:34:50 INFO : Configured logging from file /home/lnevers/gcf-2.7-rc2/src/gcf/stitcher_logging.conf 10:34:51 INFO : Reading slice IG-ST-2 credential... 10:34:51 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2014-10-06 14:31:12 UTC 10:34:51 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 10:34:51 INFO : Calling SCS... 10:34:56 INFO : Multi-AM reservation will include resources from these aggregates: 10:34:56 INFO : 10:34:56 INFO : 10:34:56 INFO : 10:34:56 INFO : 10:34:56 INFO : Stitcher doing createsliver at ... 10:35:17 INFO : ... Allocation at complete. 10:35:17 INFO : Stitcher doing createsliver at ... 10:35:33 INFO : ... Allocation at complete. 10:35:33 INFO : Stitcher doing createsliver at ... 10:35:40 INFO : ... Allocation at complete. 10:35:40 INFO : Stitcher doing createsliver at ... 10:36:26 INFO : DCN AM : must wait for status ready.... 10:36:26 INFO : Pausing 30 seconds to let circuit become ready... 10:37:03 INFO : Pausing 30 seconds to let circuit become ready... 10:37:41 INFO : DCN circuit 120151 is ready at 10:37:41 INFO : DCN circuit 120161 is ready at 10:37:48 INFO : ... Allocation at complete. 10:37:48 INFO : All aggregates are complete. 10:37:48 INFO : Your resources expire at 2014-10-05T14:24:56 (UTC). 10:37:48 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Chicago/IG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each Chicago and GPO aggregate: {{{ $ readyToLogin.py IG-ST-2 -a chicago-ig .... ig-chic's geni_status is: ready User lnevers logs in to ig-chic using: ssh -p 30522 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.geni.uchicago.edu $ readyToLogin.py IG-ST-2 -a gpo-ig .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 37178 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com }}} Login to the GPO host and ping the remote on each of the two interfaces: {{{ [lnevers@ig-gpo ~]$ ping 10.10.4.2 -c 60 -q PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59097ms rtt min/avg/max/mdev = 32.605/33.315/66.416/4.314 ms [lnevers@ig-gpo ~]$ ping 192.168.4.2 -c 60 -q PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59097ms rtt min/avg/max/mdev = 32.546/33.284/66.594/4.338 ms [lnevers@ig-gpo ~]$ }}} == IG-ST-3 IG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Chicago/IG-ST-3.rspec IG-ST-3.rspec]: {{{ $ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o 09:38:55 INFO : Configured logging from file /home/lnevers/gcf-2.7-rc2/src/gcf/stitcher_logging.conf 09:38:55 INFO : Reading slice IG-ST-3 credential... 09:38:56 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2014-10-06 14:37:17 UTC 09:38:56 INFO : Calling SCS... 09:39:01 INFO : Multi-AM reservation will include resources from these aggregates: 09:39:01 INFO : 09:39:01 INFO : 09:39:01 INFO : 09:39:01 INFO : 09:39:01 INFO : 09:39:01 INFO : 09:39:01 INFO : Stitcher doing createsliver at ... 09:39:20 INFO : ... Allocation at complete. 09:39:21 INFO : Stitcher doing createsliver at ... 09:39:35 INFO : ... Allocation at complete. 09:39:35 INFO : Stitcher doing createsliver at ... 09:40:24 INFO : ... Allocation at complete. 09:40:24 INFO : Stitcher doing createsliver at ... 09:40:34 INFO : ... Allocation at complete. 09:40:34 INFO : Stitcher doing createsliver at ... 09:40:55 INFO : ... Allocation at complete. 09:40:55 INFO : Stitcher doing createsliver at ... 09:41:40 INFO : DCN AM : must wait for status ready.... 09:41:40 INFO : Pausing 30 seconds to let circuit become ready... 09:42:18 INFO : Pausing 30 seconds to let circuit become ready... 09:42:56 WARNING : sliverstatus: 120431 is (still) failed at . Delete and retry. 09:42:56 WARNING : sliverstatus: 120421 is (still) failed at . Delete and retry. 09:42:56 WARNING : Status had error message: VLAN cancelled by rollback from contingent failure 09:43:04 WARNING : says requested VLAN was unavailable at 09:43:04 INFO : Deleting some reservations to retry, avoiding failed VLAN... 09:43:04 INFO : Doing deletesliver at ... 09:43:56 INFO : Will put back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at .... 09:43:56 INFO : Pausing for 30 seconds for Aggregates to free up resources... 09:44:26 INFO : Stitcher doing createsliver at ... 09:44:41 INFO : ... Allocation at complete. 09:44:41 INFO : Stitcher doing createsliver at ... 09:45:26 INFO : DCN AM : must wait for status ready.... 09:45:26 INFO : Pausing 30 seconds to let circuit become ready... 09:46:04 INFO : Pausing 30 seconds to let circuit become ready... 09:46:41 INFO : DCN circuit 120441 is ready at 09:46:41 INFO : DCN circuit 120451 is ready at 09:46:49 INFO : ... Allocation at complete. 09:46:49 INFO : All aggregates are complete. 09:46:49 INFO : Your resources expire at 2014-10-05T13:29:01 (UTC). 09:46:49 INFO : Saved combined reservation RSpec at 6 AMs to file '/home/lnevers/gcf-test/stitch-test/Chicago/IG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3 at 6 Aggregates (including 3 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the Chicago host: {{{ $ readyToLogin.py IG-ST-3 -a chicago-ig .... ig-chic's geni_status is: ready User lnevers logs in to ig-chic using: ssh -p 30010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.geni.uchicago.edu }}} Login to the Chicago host and ping each remote: {{{ #ping GPO IG [lnevers@ig-chic ~]$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59076ms rtt min/avg/max/mdev = 41.913/42.760/84.736/5.473 ms # Utah IG [lnevers@ig-chic ~]$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59085ms rtt min/avg/max/mdev = 88.070/89.922/183.792/12.227 ms }}} == IG-ST-4 New Site to GPO EG interoperability == == IG-ST-5 Site Information == Various pages include stitching information for a site. Each of the following were verified for this site: 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/ChicagoInstaGENI#GENINetworkStitching Chicago Aggregate] page. 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs]. 3. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found. 4. TO BE Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. == IG-ST-6 New Site !OpenFlow topology == Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/Chicago/IG-ST-6.rspec IG-ST-6.rspec]: {{{ $ stitcher createsliver IG-ST-6 ./IG-ST-6.rspec 10:55:31 INFO : Configured logging from file /home/lnevers/gcf-2.7-rc2/src/gcf/stitcher_logging.conf 10:55:32 INFO : Reading slice IG-ST-6 credential... 10:55:32 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2014-10-06 14:55:19 UTC 10:55:32 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc 10:55:32 INFO : Calling SCS... 10:55:35 INFO : Multi-AM reservation will include resources from these aggregates: 10:55:35 INFO : 10:55:35 INFO : 10:55:35 INFO : 10:55:35 INFO : 10:55:35 INFO : Stitcher doing createsliver at ... 10:55:52 INFO : ... Allocation at complete. 10:55:52 INFO : Stitcher doing createsliver at ... 10:56:09 INFO : ... Allocation at complete. 10:56:10 INFO : Stitcher doing createsliver at ... 10:56:14 INFO : ... Allocation at complete. 10:56:14 INFO : Stitcher doing createsliver at ... 10:56:59 INFO : DCN AM : must wait for status ready.... 10:56:59 INFO : Pausing 30 seconds to let circuit become ready... 10:57:37 WARNING : sliverstatus: 120221 is (still) failed at . Delete and retry. 10:57:43 WARNING : says requested VLAN was unavailable at 10:57:43 INFO : Deleting some reservations to retry, avoiding failed VLAN... 10:57:43 INFO : Doing deletesliver at ... 10:59:10 ERROR : {'output': 'start/restart in progress; try again later', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+4f8b801e2b465cb63a9580ff428a2532', 'am_type': 'protogeni', 'geni_code': 14, 'am_code': 14, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=4f8b801e2b465cb63a9580ff428a2532'}, 'value': 0} 11:00:51 ERROR : {'output': 'start/restart in progress; try again later', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+c10dd3f13b099ad9f753902b2bd5d735', 'am_type': 'protogeni', 'geni_code': 14, 'am_code': 14, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=c10dd3f13b099ad9f753902b2bd5d735'}, 'value': 0} 11:02:27 ERROR : {'output': 'start/restart in progress; try again later', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+9962682bfe431c9636ec6a7e63e0212f', 'am_type': 'protogeni', 'geni_code': 14, 'am_code': 14, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=9962682bfe431c9636ec6a7e63e0212f'}, 'value': 0} 11:03:41 INFO : Will put back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at .... 11:03:41 INFO : Pausing for 30 seconds for Aggregates to free up resources... 11:04:11 INFO : Stitcher doing createsliver at ... 11:04:26 INFO : ... Allocation at complete. 11:04:26 INFO : Stitcher doing createsliver at ... 11:05:12 INFO : DCN AM : must wait for status ready.... 11:05:12 INFO : Pausing 30 seconds to let circuit become ready... 11:05:49 INFO : DCN circuit 120251 is ready at 11:05:56 INFO : ... Allocation at complete. 11:05:56 INFO : All aggregates are complete. 11:05:56 INFO : Your resources expire at 2014-10-05T14:45:35 (UTC). 11:05:56 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Chicago/IG-ST-6-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-6 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each Chicago and GPO aggregate: {{{ $ readyToLogin.py IG-ST-6 -a chicago-ig .... ig-chic's geni_status is: ready User lnevers logs in to ig-chic using: ssh -p 30522 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.geni.uchicago.edu $ readyToLogin.py IG-ST-6 -a gpo-ig .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 37178 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI Chicago VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-09-29'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 141 MBytes 19.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.4 sec 25.0 MBytes 3.47 Mbits/sec [ 7] 0.0-60.4 sec 35.5 MBytes 4.93 Mbits/sec [ 3] 0.0-60.6 sec 28.4 MBytes 3.93 Mbits/sec [ 6] 0.0-61.0 sec 28.0 MBytes 3.85 Mbits/sec [ 5] 0.0-61.1 sec 25.4 MBytes 3.48 Mbits/sec [SUM] 0.0-61.1 sec 142 MBytes 19.5 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.5 sec 18.1 MBytes 2.51 Mbits/sec [ 8] 0.0-60.7 sec 18.9 MBytes 2.61 Mbits/sec [ 11] 0.0-60.9 sec 14.2 MBytes 1.96 Mbits/sec [ 6] 0.0-61.3 sec 15.0 MBytes 2.05 Mbits/sec [ 7] 0.0-61.4 sec 11.9 MBytes 1.62 Mbits/sec [ 10] 0.0-61.4 sec 16.5 MBytes 2.25 Mbits/sec [ 9] 0.0-61.5 sec 12.4 MBytes 1.69 Mbits/sec [ 4] 0.0-61.8 sec 9.12 MBytes 1.24 Mbits/sec [ 5] 0.0-62.0 sec 15.4 MBytes 2.08 Mbits/sec [ 3] 0.0-62.2 sec 14.1 MBytes 1.90 Mbits/sec [SUM] 0.0-62.2 sec 146 MBytes 19.6 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI Chicago VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512815 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec 7.825 ms 413864/512814 (81%) [ 3] 0.0-60.1 sec 91 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to InstaGENI Chicago VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59085ms rtt min/avg/max/mdev = 33.024/39.046/178.801/25.305 ms }}} '''Iperf InstaGENI Chicago VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2014-09-29'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.4 sec 138 MBytes 19.2 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.4 sec 27.9 MBytes 3.87 Mbits/sec [ 4] 0.0-60.5 sec 26.1 MBytes 3.62 Mbits/sec [ 6] 0.0-60.5 sec 34.6 MBytes 4.80 Mbits/sec [ 7] 0.0-60.8 sec 26.0 MBytes 3.59 Mbits/sec [ 5] 0.0-61.2 sec 28.5 MBytes 3.91 Mbits/sec [SUM] 0.0-61.2 sec 143 MBytes 19.6 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-59.1 sec 16.8 MBytes 2.38 Mbits/sec [ 10] 0.0-60.1 sec 17.4 MBytes 2.43 Mbits/sec [ 7] 0.0-60.2 sec 13.1 MBytes 1.83 Mbits/sec [ 8] 0.0-60.2 sec 14.2 MBytes 1.99 Mbits/sec [ 6] 0.0-60.2 sec 11.8 MBytes 1.64 Mbits/sec [ 12] 0.0-60.3 sec 11.5 MBytes 1.60 Mbits/sec [ 5] 0.0-60.3 sec 19.1 MBytes 2.66 Mbits/sec [ 9] 0.0-60.6 sec 16.5 MBytes 2.28 Mbits/sec [ 3] 0.0-60.7 sec 14.4 MBytes 1.99 Mbits/sec [ 11] 0.0-61.3 sec 9.50 MBytes 1.30 Mbits/sec [SUM] 0.0-61.3 sec 144 MBytes 19.8 Mbits/sec }}} '''Iperf InstaGENI Chicago VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512783 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 7.609 ms 413698/512780 (81%) [ 3] 0.0-60.2 sec 79 datagrams received out-of-order }}} '''Ping from InstaGENI Chicago VM to InstaGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59030ms rtt min/avg/max/mdev = 33.110/38.146/167.147/22.095 ms }}}