[[PageOutline]] = Case Western Reserve University Stitching Confirmation Tests = This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. == IG-ST-1 New Site to GPO IG topology == The CWRU site advertises the following stitching details: {{{ protogeni chainANDTree false false 2015-02-20T14:40:39Z 2015-02-20T14:40:39Z 1000000 1000000 1000 1 urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.clev.net.internet2.edu:eth3/2:cwru-ig 10 1000000 1000000 1000 1 l2sc ethernet 1500 650-670 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CWRU/IG-ST-1-al2s.rspec IG-ST-1-al2s.rspec]: {{{ $ stitcher.py createsliver IG-ST-1 IG-ST-1-al2s.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 09:47:54 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf 09:47:54 INFO : Reading slice IG-ST-1 credential... 09:47:55 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2015-02-26 19:45:19 UTC 09:47:55 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 09:47:55 INFO : Calling SCS... 09:47:57 INFO : Multi-AM reservation will include resources from these aggregates: 09:47:57 INFO : 09:47:57 INFO : 09:47:57 INFO : 09:47:57 INFO : 09:47:57 INFO : Stitcher doing createsliver at ... 09:48:13 INFO : ... Allocation at complete. 09:48:13 INFO : Stitcher doing createsliver at ... 09:48:49 INFO : ... Allocation at complete. 09:48:49 INFO : Stitcher doing createsliver at ... 09:48:53 INFO : ... Allocation at complete. 09:48:53 INFO : Stitcher doing createsliver at ... 09:49:38 INFO : DCN AM : must wait for status ready.... 09:49:38 INFO : Pausing 30 seconds to let circuit become ready... 09:50:15 INFO : DCN circuit 154121 is ready at 09:50:23 INFO : ... Allocation at complete. 09:50:23 INFO : All aggregates are complete. 09:50:23 INFO : Your resources expire at 2015-02-26T14:37:57 (UTC). 09:50:23 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/CWRU/IG-ST-1-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each CWRU and GPO aggregate: {{{ $ readyToLogin.py IG-ST-1 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 32570 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com ... ig-cwru's geni_status is: ready User lnevers logs in to ig-cwru using: ssh -p 30266 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.geni.case.edu }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI CWRU VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-20'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 142 MBytes 19.8 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 31.1 MBytes 4.35 Mbits/sec [ 7] 0.0-60.1 sec 22.2 MBytes 3.10 Mbits/sec [ 5] 0.0-60.2 sec 36.8 MBytes 5.12 Mbits/sec [ 4] 0.0-60.4 sec 28.1 MBytes 3.91 Mbits/sec [ 6] 0.0-60.9 sec 26.2 MBytes 3.62 Mbits/sec [SUM] 0.0-60.9 sec 144 MBytes 19.9 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.1 sec 12.0 MBytes 1.68 Mbits/sec [ 10] 0.0-60.2 sec 11.1 MBytes 1.55 Mbits/sec [ 7] 0.0-60.7 sec 15.4 MBytes 2.12 Mbits/sec [ 6] 0.0-60.9 sec 17.5 MBytes 2.41 Mbits/sec [ 9] 0.0-61.0 sec 14.1 MBytes 1.94 Mbits/sec [ 11] 0.0-61.1 sec 15.2 MBytes 2.09 Mbits/sec [ 12] 0.0-61.3 sec 21.2 MBytes 2.91 Mbits/sec [ 8] 0.0-62.0 sec 13.2 MBytes 1.79 Mbits/sec [ 3] 0.0-62.0 sec 12.5 MBytes 1.69 Mbits/sec [ 5] 0.0-62.6 sec 12.6 MBytes 1.69 Mbits/sec [SUM] 0.0-62.6 sec 145 MBytes 19.4 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI CWRU VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512804 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 139 MBytes 19.5 Mbits/sec 0.108 ms 413412/512799 (81%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the InstaGENI CWRU VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59108ms rtt min/avg/max/mdev = 23.540/23.824/26.133/0.332 ms }}} '''Iperf InstaGENI CWRU VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-20'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 142 MBytes 19.8 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.0 sec 22.0 MBytes 3.07 Mbits/sec [ 7] 0.0-60.2 sec 37.1 MBytes 5.17 Mbits/sec [ 3] 0.0-60.3 sec 33.0 MBytes 4.59 Mbits/sec [ 6] 0.0-60.3 sec 24.6 MBytes 3.42 Mbits/sec [ 4] 0.0-60.6 sec 27.4 MBytes 3.79 Mbits/sec [SUM] 0.0-60.6 sec 144 MBytes 20.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.1 sec 15.9 MBytes 2.22 Mbits/sec [ 5] 0.0-60.2 sec 11.9 MBytes 1.66 Mbits/sec [ 11] 0.0-60.5 sec 10.5 MBytes 1.46 Mbits/sec [ 10] 0.0-60.9 sec 11.9 MBytes 1.63 Mbits/sec [ 9] 0.0-61.0 sec 15.8 MBytes 2.17 Mbits/sec [ 7] 0.0-61.1 sec 15.5 MBytes 2.13 Mbits/sec [ 6] 0.0-61.6 sec 17.6 MBytes 2.40 Mbits/sec [ 8] 0.0-61.6 sec 17.2 MBytes 2.35 Mbits/sec [ 3] 0.0-61.6 sec 17.4 MBytes 2.37 Mbits/sec [ 4] 0.0-61.6 sec 13.4 MBytes 1.82 Mbits/sec [SUM] 0.0-61.6 sec 147 MBytes 20.0 Mbits/sec }}} '''Iperf InstaGENI CWRU VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 100 Mbits/sec [ 3] Sent 512753 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 11.232 ms 413506/512750 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI CWRU VM to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59108ms rtt min/avg/max/mdev = 23.255/23.708/23.961/0.179 ms }}} == IG-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CWRU/IG-ST-2.rspec IG-ST-2.rspec]: {{{ $ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 09:59:16 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf 09:59:16 INFO : Reading slice IG-ST-2 credential... 09:59:16 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2015-02-27 14:59:00 UTC 09:59:16 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 09:59:16 INFO : Calling SCS... 09:59:20 INFO : Multi-AM reservation will include resources from these aggregates: 09:59:20 INFO : 09:59:20 INFO : 09:59:20 INFO : 09:59:20 INFO : 09:59:20 INFO : Stitcher doing createsliver at ... 09:59:36 INFO : ... Allocation at complete. 09:59:37 INFO : Stitcher doing createsliver at ... 09:59:52 INFO : ... Allocation at complete. 09:59:52 INFO : Stitcher doing createsliver at ... 09:59:57 INFO : ... Allocation at complete. 09:59:57 INFO : Stitcher doing createsliver at ... 10:00:42 INFO : DCN AM : must wait for status ready.... 10:00:42 INFO : Pausing 30 seconds to let circuit become ready... 10:01:20 INFO : Pausing 30 seconds to let circuit become ready... 10:01:57 INFO : DCN circuit 154131 is ready at 10:01:57 INFO : DCN circuit 154141 is ready at 10:02:04 INFO : ... Allocation at complete. 10:02:04 INFO : All aggregates are complete. 10:02:04 INFO : Your resources expire at 2015-02-26T14:49:20 (UTC). 10:02:04 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/CWRU/IG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each CWRU and GPO aggregate: {{{ $ readyToLogin.py IG-ST-2 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 37178 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com .... ig-cwru's geni_status is: ready User lnevers logs in to ig-cwru using: ssh -p 30522 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.geni.case.edu }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ $ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" 1. Find login Info for hosts in slice IG-ST-2 Key file [/home/lnevers/.ssh/arendia-id_rsa] does NOT exist. Key file [/home/lnevers/.ssh/sendaria-id_rsa] does NOT exist. 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59108ms rtt min/avg/max/mdev = 23.450/24.150/47.182/3.007 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 58 received, 3% packet loss, time 59122ms rtt min/avg/max/mdev = 23.565/24.174/47.104/3.045 ms ... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo }}} == IG-ST-3 IG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CWRU/IG-ST-3.rspec IG-ST-3.rspec]: {{{ $ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 10:10:03 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf 10:10:03 INFO : Reading slice IG-ST-3 credential... 10:10:04 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2015-02-27 15:09:51 UTC 10:10:04 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 10:10:04 INFO : Calling SCS... 10:10:08 INFO : Multi-AM reservation will include resources from these aggregates: 10:10:08 INFO : 10:10:08 INFO : 10:10:08 INFO : 10:10:08 INFO : 10:10:08 INFO : 10:10:08 INFO : Stitcher doing createsliver at ... 10:10:29 INFO : ... Allocation at complete. 10:10:29 INFO : Stitcher doing createsliver at ... 10:10:48 INFO : ... Allocation at complete. 10:10:48 INFO : Stitcher doing createsliver at ... 10:11:05 INFO : ... Allocation at complete. 10:11:05 INFO : Stitcher doing createsliver at ... 10:11:11 INFO : ... Allocation at complete. 10:11:11 INFO : Stitcher doing createsliver at ... 10:11:56 INFO : DCN AM : must wait for status ready.... 10:11:56 INFO : Pausing 30 seconds to let circuit become ready... 10:12:34 INFO : Pausing 30 seconds to let circuit become ready... 10:13:11 INFO : DCN circuit 154151 is ready at 10:13:11 INFO : DCN circuit 154161 is ready at 10:13:18 INFO : ... Allocation at complete. 10:13:18 INFO : All aggregates are complete. 10:13:18 INFO : Your resources expire at 2015-02-26T15:00:08 (UTC). 10:13:18 INFO : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/CWRU/IG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the CWRU host: {{{ $ readyToLogin.py IG-ST-3 -a cwru-ig .... ig-cwru's geni_status is: ready User lnevers logs in to ig-cwru using: ssh -p 30266 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.geni.case.edu }}} Login to the CWRU host and ping each remote: {{{ #ping GPO IG lnevers@ig-cwru:~$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59109ms rtt min/avg/max/mdev = 23.423/23.772/26.261/0.376 ms # UKYPKS2 IG lnevers@ig-cwru:~$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59050ms rtt min/avg/max/mdev = 35.503/36.531/74.819/5.052 ms }}} == IG-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CWRU/IG-ST-4.rspec IG-ST-4.rspec]. This was done to get around the mismatch in link capacity units that exists between IG and EG. {{{ $ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 10:12:23 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf 10:12:23 INFO : Reading slice IG-ST-4 credential... 10:12:23 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2015-02-27 15:12:00 UTC 10:12:23 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 10:12:23 INFO : Calling SCS... 10:12:25 INFO : Multi-AM reservation will include resources from these aggregates: 10:12:25 INFO : 10:12:25 INFO : 10:12:25 INFO : 10:12:25 INFO : 10:12:25 INFO : Stitcher doing createsliver at ... 10:12:42 INFO : ... Allocation at complete. 10:12:42 INFO : Stitcher doing createsliver at ... 10:12:55 INFO : ... Allocation at complete. 10:12:55 INFO : Stitcher doing createsliver at ... 10:12:58 INFO : ... Allocation at complete. 10:12:58 INFO : Stitcher doing createsliver at ... 10:13:43 INFO : DCN AM : must wait for status ready.... 10:13:43 INFO : Pausing 30 seconds to let circuit become ready... 10:14:20 INFO : DCN circuit 154171 is ready at 10:14:27 INFO : ... Allocation at complete. 10:14:27 INFO : All aggregates are complete. 10:14:27 INFO : Your resources expire at 2015-02-26T15:02:25 (UTC). 10:14:27 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/CWRU/IG-ST-4-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each CWRU and GPO aggregate: {{{ $ readyToLogin.py IG-ST-4 --useSliceAggregates .... eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.12 .... ig-cwru's geni_status is: ready User lnevers logs in to ig-cwru using: ssh -p 30522 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.geni.case.edu }}} === Measurements === '''Iperf ExoGENI GPO VM to InstaGENI CWRU VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2015-02-20'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.1 sec 27.4 MBytes 3.82 Mbits/sec [ 4] 0.0-60.7 sec 29.4 MBytes 4.06 Mbits/sec [ 5] 0.0-60.8 sec 29.1 MBytes 4.02 Mbits/sec [ 6] 0.0-60.9 sec 29.1 MBytes 4.01 Mbits/sec [ 3] 0.0-61.0 sec 29.2 MBytes 4.02 Mbits/sec [SUM] 0.0-61.0 sec 144 MBytes 19.8 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 19.8 MBytes 2.76 Mbits/sec [ 10] 0.0-60.2 sec 19.8 MBytes 2.75 Mbits/sec [ 6] 0.0-60.5 sec 12.6 MBytes 1.75 Mbits/sec [ 8] 0.0-61.1 sec 14.0 MBytes 1.92 Mbits/sec [ 4] 0.0-61.5 sec 12.8 MBytes 1.74 Mbits/sec [ 12] 0.0-61.5 sec 13.2 MBytes 1.81 Mbits/sec [ 5] 0.0-61.7 sec 13.1 MBytes 1.79 Mbits/sec [ 3] 0.0-61.7 sec 13.1 MBytes 1.78 Mbits/sec [ 9] 0.0-62.0 sec 16.9 MBytes 2.28 Mbits/sec [ 11] 0.0-62.3 sec 13.9 MBytes 1.87 Mbits/sec [SUM] 0.0-62.3 sec 149 MBytes 20.1 Mbits/sec }}} '''Iperf ExoGENI GPO VM to InstaGENI CWRU VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512780 datagrams [ 3] Server Report: [ 3] 0.0-59.9 sec 139 MBytes 19.5 Mbits/sec 0.125 ms 413566/512779 (81%) [ 3] 0.0-59.9 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI GPO VM to the InstaGENI CWRU VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59037ms rtt min/avg/max/mdev = 23.526/23.778/24.032/0.112 ms }}} '''Iperf InstaGENI CWRU VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-20'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 143 MBytes 20.0 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 34.4 MBytes 4.80 Mbits/sec [ 7] 0.0-60.3 sec 25.8 MBytes 3.58 Mbits/sec [ 6] 0.0-60.5 sec 40.5 MBytes 5.62 Mbits/sec [ 4] 0.0-60.9 sec 21.4 MBytes 2.94 Mbits/sec [ 5] 0.0-61.0 sec 23.0 MBytes 3.16 Mbits/sec [SUM] 0.0-61.0 sec 145 MBytes 19.9 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.2 sec 15.8 MBytes 2.20 Mbits/sec [ 4] 0.0-60.5 sec 24.4 MBytes 3.38 Mbits/sec [ 5] 0.0-60.7 sec 10.8 MBytes 1.49 Mbits/sec [ 3] 0.0-60.9 sec 13.4 MBytes 1.84 Mbits/sec [ 7] 0.0-60.9 sec 15.4 MBytes 2.12 Mbits/sec [ 10] 0.0-61.0 sec 11.0 MBytes 1.51 Mbits/sec [ 6] 0.0-61.1 sec 15.0 MBytes 2.06 Mbits/sec [ 11] 0.0-61.2 sec 10.5 MBytes 1.44 Mbits/sec [ 9] 0.0-61.7 sec 13.4 MBytes 1.82 Mbits/sec [ 8] 0.0-61.9 sec 16.5 MBytes 2.24 Mbits/sec [SUM] 0.0-61.9 sec 146 MBytes 19.8 Mbits/sec }}} '''Iperf InstaGENI CWRU VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512763 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 14.576 ms 413400/512760 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI CWRU VM to ExoGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59112ms rtt min/avg/max/mdev = 23.634/23.802/24.032/0.146 ms }}} == IG-ST-5 Site Information == Various pages include stitching information for a site. Each of the following were verified for this site: 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/CWRUInstaGENI#GENINetworkStitching CWRU Aggregate] page. 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs]. 3. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found. 4. Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. == IG-ST-6 New Site !OpenFlow topology == Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CWRU/IG-ST-6.rspec IG-ST-6.rspec]: {{{ $ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc 10:32:33 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf 10:32:33 INFO : Reading slice IG-ST-6 credential... 10:32:34 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2015-02-27 15:31:12 UTC 10:32:34 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc 10:32:34 INFO : Calling SCS... 10:32:36 INFO : Multi-AM reservation will include resources from these aggregates: 10:32:36 INFO : 10:32:36 INFO : 10:32:36 INFO : 10:32:36 INFO : 10:32:36 INFO : Stitcher doing createsliver at ... 10:32:54 INFO : ... Allocation at complete. 10:32:54 INFO : Stitcher doing createsliver at ... 10:33:09 INFO : ... Allocation at complete. 10:33:09 INFO : Stitcher doing createsliver at ... 10:33:13 INFO : ... Allocation at complete. 10:33:13 INFO : Stitcher doing createsliver at ... 10:33:58 INFO : DCN AM : must wait for status ready.... 10:33:58 INFO : Pausing 30 seconds to let circuit become ready... 10:34:35 INFO : DCN circuit 154181 is ready at 10:34:42 INFO : ... Allocation at complete. 10:34:42 INFO : All aggregates are complete. 10:34:42 INFO : Your resources expire at 2015-02-26T15:22:36 (UTC). 10:34:42 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/CWRU/IG-ST-6-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-6 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each CWRU and GPO aggregate: {{{ $ readyToLogin.py IG-ST-6 --useSliceAggregates .... ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 32570 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com ... ig-cwru's geni_status is: ready User lnevers logs in to ig-cwru using: ssh -p 30266 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.geni.case.edu }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI CWRU VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-20'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.4 sec 141 MBytes 19.5 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-59.4 sec 21.6 MBytes 3.06 Mbits/sec [ 6] 0.0-60.2 sec 28.4 MBytes 3.96 Mbits/sec [ 5] 0.0-60.4 sec 33.1 MBytes 4.60 Mbits/sec [ 4] 0.0-60.7 sec 31.8 MBytes 4.39 Mbits/sec [ 7] 0.0-61.1 sec 27.8 MBytes 3.81 Mbits/sec [SUM] 0.0-61.1 sec 143 MBytes 19.6 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-59.8 sec 12.8 MBytes 1.79 Mbits/sec [ 9] 0.0-60.1 sec 11.8 MBytes 1.64 Mbits/sec [ 10] 0.0-60.2 sec 15.8 MBytes 2.19 Mbits/sec [ 12] 0.0-60.2 sec 14.8 MBytes 2.05 Mbits/sec [ 6] 0.0-60.8 sec 15.4 MBytes 2.12 Mbits/sec [ 8] 0.0-61.3 sec 15.4 MBytes 2.10 Mbits/sec [ 11] 0.0-61.3 sec 13.9 MBytes 1.90 Mbits/sec [ 3] 0.0-61.4 sec 17.1 MBytes 2.34 Mbits/sec [ 4] 0.0-61.5 sec 14.6 MBytes 2.00 Mbits/sec [ 7] 0.0-61.6 sec 14.9 MBytes 2.03 Mbits/sec [SUM] 0.0-61.6 sec 146 MBytes 19.9 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI CWRU VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512809 datagrams [ 3] Server Report: [ 3] 0.0-59.9 sec 139 MBytes 19.4 Mbits/sec 0.110 ms 413729/512804 (81%) [ 3] 0.0-59.9 sec 57 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to InstaGENI CWRU VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59109ms rtt min/avg/max/mdev = 23.427/32.630/407.372/52.404 ms }}} '''Iperf InstaGENI CWRU VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)''' ''Collected: 2015-02-20'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.4 sec 140 MBytes 19.5 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.7 sec 30.6 MBytes 4.23 Mbits/sec [ 7] 0.0-60.9 sec 22.6 MBytes 3.12 Mbits/sec [ 3] 0.0-61.0 sec 26.9 MBytes 3.70 Mbits/sec [ 4] 0.0-61.1 sec 33.2 MBytes 4.56 Mbits/sec [ 6] 0.0-61.7 sec 30.1 MBytes 4.10 Mbits/sec [SUM] 0.0-61.7 sec 144 MBytes 19.5 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-59.4 sec 13.8 MBytes 1.94 Mbits/sec [ 3] 0.0-59.4 sec 19.2 MBytes 2.72 Mbits/sec [ 4] 0.0-59.4 sec 12.2 MBytes 1.73 Mbits/sec [ 8] 0.0-59.5 sec 14.2 MBytes 2.01 Mbits/sec [ 9] 0.0-59.6 sec 12.5 MBytes 1.76 Mbits/sec [ 6] 0.0-59.8 sec 13.2 MBytes 1.86 Mbits/sec [ 5] 0.0-60.6 sec 16.2 MBytes 2.25 Mbits/sec [ 12] 0.0-60.7 sec 12.9 MBytes 1.78 Mbits/sec [ 10] 0.0-60.7 sec 16.9 MBytes 2.33 Mbits/sec [ 11] 0.0-60.9 sec 13.1 MBytes 1.81 Mbits/sec [SUM] 0.0-60.9 sec 144 MBytes 19.9 Mbits/sec }}} '''Iperf InstaGENI CWRU VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512769 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 17.628 ms 413654/512768 (81%) [ 3] 0.0-60.2 sec 45 datagrams received out-of-order }}} '''Ping from InstaGENI CWRU VM to InstaGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59106ms rtt min/avg/max/mdev = 23.465/28.198/118.054/19.563 ms }}} ------ {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}