| 1 | [[PageOutline]] |
| 2 | |
| 3 | = Case Western Reserve University Stitching Confirmation Tests = |
| 4 | |
| 5 | This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page. |
| 6 | |
| 7 | == IG-ST-1 New Site to GPO IG topology == |
| 8 | The CWRU site advertises the following stitching details: |
| 9 | {{{ |
| 10 | <stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2015-02-20T14:40:39Z" > |
| 11 | <aggregate id="urn:publicid:IDN+geni.case.edu+authority+cm" url="https://www.geni.case.edu:12369/protogeni/xmlrpc/am"> |
| 12 | <aggregatetype>protogeni</aggregatetype> |
| 13 | <stitchingmode>chainANDTree</stitchingmode> |
| 14 | <scheduledservices>false</scheduledservices> |
| 15 | <negotiatedservices>false</negotiatedservices> |
| 16 | <lifetime id="life"> |
| 17 | <start type="time">2015-02-20T14:40:39Z</start> |
| 18 | <end type="time">2015-02-20T14:40:39Z</end> |
| 19 | </lifetime> |
| 20 | <node id="urn:publicid:IDN+geni.case.edu+node+procurve2"> |
| 21 | <port id="urn:publicid:IDN+geni.case.edu+stitchport+procurve2:2.21.al2s"> |
| 22 | <capacity>1000000</capacity> |
| 23 | <maximumReservableCapacity>1000000</maximumReservableCapacity> |
| 24 | <minimumReservableCapacity>1000</minimumReservableCapacity> |
| 25 | <granularity>1</granularity> |
| 26 | <link id="urn:publicid:IDN+geni.case.edu+interface+procurve2:2.21.al2s"> |
| 27 | <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.clev.net.internet2.edu:eth3/2:cwru-ig</remoteLinkId> |
| 28 | <trafficEngineeringMetric>10</trafficEngineeringMetric> |
| 29 | <capacity>1000000</capacity> |
| 30 | <maximumReservableCapacity>1000000</maximumReservableCapacity> |
| 31 | <minimumReservableCapacity>1000</minimumReservableCapacity> |
| 32 | <granularity>1</granularity> |
| 33 | <switchingCapabilityDescriptor> |
| 34 | <switchingcapType>l2sc</switchingcapType> |
| 35 | <encodingType>ethernet</encodingType> |
| 36 | <switchingCapabilitySpecificInfo> |
| 37 | <switchingCapabilitySpecificInfo_L2sc> |
| 38 | <interfaceMTU>1500</interfaceMTU> |
| 39 | <vlanRangeAvailability>650-670</vlanRangeAvailability> |
| 40 | <vlanTranslation>false</vlanTranslation> |
| 41 | </switchingCapabilitySpecificInfo_L2sc> |
| 42 | </switchingCapabilitySpecificInfo> |
| 43 | </switchingCapabilityDescriptor> |
| 44 | </link> |
| 45 | </port> |
| 46 | </node> |
| 47 | </aggregate> |
| 48 | </stitching> |
| 49 | }}} |
| 50 | |
| 51 | Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. |
| 52 | |
| 53 | Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CWRU/IG-ST-1-al2s.rspec IG-ST-1-al2s.rspec]: |
| 54 | {{{ |
| 55 | $ stitcher.py createsliver IG-ST-1 IG-ST-1-al2s.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc |
| 56 | 09:47:54 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf |
| 57 | 09:47:54 INFO : Reading slice IG-ST-1 credential... |
| 58 | 09:47:55 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2015-02-26 19:45:19 UTC |
| 59 | 09:47:55 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc |
| 60 | 09:47:55 INFO : Calling SCS... |
| 61 | 09:47:57 INFO : Multi-AM reservation will include resources from these aggregates: |
| 62 | 09:47:57 INFO : <Aggregate cwru-ig> |
| 63 | 09:47:57 INFO : <Aggregate gpo-ig> |
| 64 | 09:47:57 INFO : <Aggregate al2s> |
| 65 | 09:47:57 INFO : <Aggregate ion> |
| 66 | 09:47:57 INFO : Stitcher doing createsliver at <Aggregate cwru-ig>... |
| 67 | 09:48:13 INFO : ... Allocation at <Aggregate cwru-ig> complete. |
| 68 | 09:48:13 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... |
| 69 | 09:48:49 INFO : ... Allocation at <Aggregate gpo-ig> complete. |
| 70 | 09:48:49 INFO : Stitcher doing createsliver at <Aggregate al2s>... |
| 71 | 09:48:53 INFO : ... Allocation at <Aggregate al2s> complete. |
| 72 | 09:48:53 INFO : Stitcher doing createsliver at <Aggregate ion>... |
| 73 | 09:49:38 INFO : DCN AM <Aggregate ion>: must wait for status ready.... |
| 74 | 09:49:38 INFO : Pausing 30 seconds to let circuit become ready... |
| 75 | 09:50:15 INFO : DCN circuit 154121 is ready at <Aggregate ion> |
| 76 | 09:50:23 INFO : ... Allocation at <Aggregate ion> complete. |
| 77 | 09:50:23 INFO : All aggregates are complete. |
| 78 | 09:50:23 INFO : Your resources expire at 2015-02-26T14:37:57 (UTC). |
| 79 | 09:50:23 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/CWRU/IG-ST-1-manifest-rspec-multiam-combined.xml' |
| 80 | Success: Reserved resources in slice IG-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). |
| 81 | }}} |
| 82 | |
| 83 | Determined login information at each CWRU and GPO aggregate: |
| 84 | {{{ |
| 85 | $ readyToLogin.py IG-ST-1 --useSliceAggregates |
| 86 | .... |
| 87 | ig-gpo's geni_status is: ready |
| 88 | User lnevers logs in to ig-gpo using: |
| 89 | ssh -p 32570 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com |
| 90 | ... |
| 91 | ig-cwru's geni_status is: ready |
| 92 | User lnevers logs in to ig-cwru using: |
| 93 | ssh -p 30266 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.geni.case.edu |
| 94 | |
| 95 | }}} |
| 96 | |
| 97 | === Measurements === |
| 98 | |
| 99 | '''Iperf InstaGENI GPO VM to InstaGENI CWRU VM (TCP) - TCP window size: 23.5 KByte (default)''' |
| 100 | |
| 101 | ''Collected: 2015-02-20'' |
| 102 | |
| 103 | __One Client_ |
| 104 | {{{ |
| 105 | [ ID] Interval Transfer Bandwidth |
| 106 | [ 3] 0.0-60.0 sec 142 MBytes 19.8 Mbits/sec |
| 107 | }}} |
| 108 | |
| 109 | __Five Clients__ |
| 110 | {{{ |
| 111 | [ ID] Interval Transfer Bandwidth |
| 112 | [ 3] 0.0-60.0 sec 31.1 MBytes 4.35 Mbits/sec |
| 113 | [ 7] 0.0-60.1 sec 22.2 MBytes 3.10 Mbits/sec |
| 114 | [ 5] 0.0-60.2 sec 36.8 MBytes 5.12 Mbits/sec |
| 115 | [ 4] 0.0-60.4 sec 28.1 MBytes 3.91 Mbits/sec |
| 116 | [ 6] 0.0-60.9 sec 26.2 MBytes 3.62 Mbits/sec |
| 117 | [SUM] 0.0-60.9 sec 144 MBytes 19.9 Mbits/sec |
| 118 | }}} |
| 119 | |
| 120 | __Ten Clients__ |
| 121 | {{{ |
| 122 | [ ID] Interval Transfer Bandwidth |
| 123 | [ 4] 0.0-60.1 sec 12.0 MBytes 1.68 Mbits/sec |
| 124 | [ 10] 0.0-60.2 sec 11.1 MBytes 1.55 Mbits/sec |
| 125 | [ 7] 0.0-60.7 sec 15.4 MBytes 2.12 Mbits/sec |
| 126 | [ 6] 0.0-60.9 sec 17.5 MBytes 2.41 Mbits/sec |
| 127 | [ 9] 0.0-61.0 sec 14.1 MBytes 1.94 Mbits/sec |
| 128 | [ 11] 0.0-61.1 sec 15.2 MBytes 2.09 Mbits/sec |
| 129 | [ 12] 0.0-61.3 sec 21.2 MBytes 2.91 Mbits/sec |
| 130 | [ 8] 0.0-62.0 sec 13.2 MBytes 1.79 Mbits/sec |
| 131 | [ 3] 0.0-62.0 sec 12.5 MBytes 1.69 Mbits/sec |
| 132 | [ 5] 0.0-62.6 sec 12.6 MBytes 1.69 Mbits/sec |
| 133 | [SUM] 0.0-62.6 sec 145 MBytes 19.4 Mbits/sec |
| 134 | }}} |
| 135 | |
| 136 | '''Iperf InstaGENI GPO VM to InstaGENI CWRU VM (UDP) - UDP buffer size: 224 KByte (default) ''' |
| 137 | {{{ |
| 138 | [ ID] Interval Transfer Bandwidth |
| 139 | [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec |
| 140 | [ 3] Sent 512804 datagrams |
| 141 | [ 3] Server Report: |
| 142 | [ 3] 0.0-60.0 sec 139 MBytes 19.5 Mbits/sec 0.108 ms 413412/512799 (81%) |
| 143 | [ 3] 0.0-60.0 sec 1 datagrams received out-of-order |
| 144 | }}} |
| 145 | |
| 146 | '''Ping from InstaGENI GPO VM to the InstaGENI CWRU VM ''' |
| 147 | {{{ |
| 148 | 60 packets transmitted, 60 received, 0% packet loss, time 59108ms |
| 149 | rtt min/avg/max/mdev = 23.540/23.824/26.133/0.332 ms |
| 150 | }}} |
| 151 | |
| 152 | |
| 153 | '''Iperf InstaGENI CWRU VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)''' |
| 154 | |
| 155 | ''Collected: 2015-02-20'' |
| 156 | |
| 157 | __One Client_ |
| 158 | {{{ |
| 159 | [ ID] Interval Transfer Bandwidth |
| 160 | [ 3] 0.0-60.1 sec 142 MBytes 19.8 Mbits/sec |
| 161 | }}} |
| 162 | |
| 163 | __Five Clients__ |
| 164 | {{{ |
| 165 | [ ID] Interval Transfer Bandwidth |
| 166 | [ 5] 0.0-60.0 sec 22.0 MBytes 3.07 Mbits/sec |
| 167 | [ 7] 0.0-60.2 sec 37.1 MBytes 5.17 Mbits/sec |
| 168 | [ 3] 0.0-60.3 sec 33.0 MBytes 4.59 Mbits/sec |
| 169 | [ 6] 0.0-60.3 sec 24.6 MBytes 3.42 Mbits/sec |
| 170 | [ 4] 0.0-60.6 sec 27.4 MBytes 3.79 Mbits/sec |
| 171 | [SUM] 0.0-60.6 sec 144 MBytes 20.0 Mbits/sec |
| 172 | }}} |
| 173 | |
| 174 | __Ten Clients__ |
| 175 | {{{ |
| 176 | [ ID] Interval Transfer Bandwidth |
| 177 | [ 12] 0.0-60.1 sec 15.9 MBytes 2.22 Mbits/sec |
| 178 | [ 5] 0.0-60.2 sec 11.9 MBytes 1.66 Mbits/sec |
| 179 | [ 11] 0.0-60.5 sec 10.5 MBytes 1.46 Mbits/sec |
| 180 | [ 10] 0.0-60.9 sec 11.9 MBytes 1.63 Mbits/sec |
| 181 | [ 9] 0.0-61.0 sec 15.8 MBytes 2.17 Mbits/sec |
| 182 | [ 7] 0.0-61.1 sec 15.5 MBytes 2.13 Mbits/sec |
| 183 | [ 6] 0.0-61.6 sec 17.6 MBytes 2.40 Mbits/sec |
| 184 | [ 8] 0.0-61.6 sec 17.2 MBytes 2.35 Mbits/sec |
| 185 | [ 3] 0.0-61.6 sec 17.4 MBytes 2.37 Mbits/sec |
| 186 | [ 4] 0.0-61.6 sec 13.4 MBytes 1.82 Mbits/sec |
| 187 | [SUM] 0.0-61.6 sec 147 MBytes 20.0 Mbits/sec |
| 188 | }}} |
| 189 | |
| 190 | '''Iperf InstaGENI CWRU VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) ''' |
| 191 | {{{ |
| 192 | [ ID] Interval Transfer Bandwidth |
| 193 | [ 3] 0.0-60.0 sec 719 MBytes 100 Mbits/sec |
| 194 | [ 3] Sent 512753 datagrams |
| 195 | [ 3] Server Report: |
| 196 | [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 11.232 ms 413506/512750 (81%) |
| 197 | [ 3] 0.0-60.2 sec 1 datagrams received out-of-order |
| 198 | }}} |
| 199 | |
| 200 | '''Ping from InstaGENI CWRU VM to GPO InstaGENI VM ''' |
| 201 | {{{ |
| 202 | 60 packets transmitted, 60 received, 0% packet loss, time 59108ms |
| 203 | rtt min/avg/max/mdev = 23.255/23.708/23.961/0.179 ms |
| 204 | }}} |
| 205 | |
| 206 | == IG-ST-2 New Site to GPO IG Loop topology == |
| 207 | |
| 208 | Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CWRU/IG-ST-2.rspec IG-ST-2.rspec]: |
| 209 | {{{ |
| 210 | $ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc |
| 211 | 09:59:16 INFO : Configured logging from file /home/lnevers/gcf-2.8/src/gcf/stitcher_logging.conf |
| 212 | 09:59:16 INFO : Reading slice IG-ST-2 credential... |
| 213 | 09:59:16 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2015-02-27 14:59:00 UTC |
| 214 | 09:59:16 INFO : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc |
| 215 | 09:59:16 INFO : Calling SCS... |
| 216 | 09:59:20 INFO : Multi-AM reservation will include resources from these aggregates: |
| 217 | 09:59:20 INFO : <Aggregate cwru-ig> |
| 218 | 09:59:20 INFO : <Aggregate gpo-ig> |
| 219 | 09:59:20 INFO : <Aggregate al2s> |
| 220 | 09:59:20 INFO : <Aggregate ion> |
| 221 | 09:59:20 INFO : Stitcher doing createsliver at <Aggregate cwru-ig>... |
| 222 | 09:59:36 INFO : ... Allocation at <Aggregate cwru-ig> complete. |
| 223 | 09:59:37 INFO : Stitcher doing createsliver at <Aggregate gpo-ig>... |
| 224 | 09:59:52 INFO : ... Allocation at <Aggregate gpo-ig> complete. |
| 225 | 09:59:52 INFO : Stitcher doing createsliver at <Aggregate al2s>... |
| 226 | 09:59:57 INFO : ... Allocation at <Aggregate al2s> complete. |
| 227 | 09:59:57 INFO : Stitcher doing createsliver at <Aggregate ion>... |
| 228 | 10:00:42 INFO : DCN AM <Aggregate ion>: must wait for status ready.... |
| 229 | 10:00:42 INFO : Pausing 30 seconds to let circuit become ready... |
| 230 | 10:01:20 INFO : Pausing 30 seconds to let circuit become ready... |
| 231 | 10:01:57 INFO : DCN circuit 154131 is ready at <Aggregate ion> |
| 232 | 10:01:57 INFO : DCN circuit 154141 is ready at <Aggregate ion> |
| 233 | 10:02:04 INFO : ... Allocation at <Aggregate ion> complete. |
| 234 | 10:02:04 INFO : All aggregates are complete. |
| 235 | 10:02:04 INFO : Your resources expire at 2015-02-26T14:49:20 (UTC). |
| 236 | 10:02:04 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/CWRU/IG-ST-2-manifest-rspec-multiam-combined.xml' |
| 237 | Success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). |
| 238 | }}} |
| 239 | |
| 240 | Determined login information at each CWRU and GPO aggregate: |
| 241 | {{{ |
| 242 | $ readyToLogin.py IG-ST-2 --useSliceAggregates |
| 243 | .... |
| 244 | ig-gpo's geni_status is: ready |
| 245 | User lnevers logs in to ig-gpo using: |
| 246 | ssh -p 37178 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com |
| 247 | .... |
| 248 | ig-cwru's geni_status is: ready |
| 249 | User lnevers logs in to ig-cwru using: |
| 250 | ssh -p 30522 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.geni.case.edu |
| 251 | }}} |
| 252 | |
| 253 | Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: |
| 254 | {{{ |
| 255 | remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" |
| 256 | }}} |
| 257 | |
| 258 | |
| 259 | == IG-ST-3 IG-ST-3 New Site 3 node linear topology == |
| 260 | |
| 261 | Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CWRU/IG-ST-3.rspec IG-ST-3.rspec]: |
| 262 | {{{ |
| 263 | omni.py createslice IG-ST-3 |
| 264 | stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o |
| 265 | }}} |
| 266 | |
| 267 | Determined login information the CWRU host: |
| 268 | {{{ |
| 269 | $ readyToLogin.py IG-ST-3 -a cwru-ig |
| 270 | .... |
| 271 | }}} |
| 272 | Login to the CWRU host and ping each remote: |
| 273 | {{{ |
| 274 | #ping GPO IG |
| 275 | ping 192.168.2.1 -c 60 -q |
| 276 | # UKYPKS2 IG |
| 277 | ping 192.168.4.1 -c 60 -q |
| 278 | }}} |
| 279 | |