[[PageOutline]]

= Corporation for Education Network Initiatives in California (CENIC) Stitching Confirmation Tests =

This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page.

== IG-ST-1 New Site to GPO IG topology ==

The CENIC site advertises the following stitching details:
{{{
<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2015-01-08T19:35:
51Z" >
<aggregate id="urn:publicid:IDN+instageni.cenic.net+authority+cm" url="https://www.instageni.cenic
.net:12369/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
    <start type="time">2015-01-08T19:35:51Z</start>
    <end type="time">2015-01-08T19:35:51Z</end>
</lifetime>
<node id="urn:publicid:IDN+instageni.cenic.net+node+procurve2">
  <port id="urn:publicid:IDN+instageni.cenic.net+stitchport+procurve2:1.19.al2s">
    <capacity>1000000</capacity>
    <maximumReservableCapacity>1000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+instageni.cenic.net+interface+procurve2:1.19.al2s">
      <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.losa.net.internet2.edu:eth5/1:cenic-ig</remoteLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>1000000</capacity>
      <maximumReservableCapacity>1000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>1550-1569</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
</node>
</aggregate>
</stitching>
}}}

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be  requested.

Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CENIC/IG-ST-1-al2s.rspec IG-ST-1-al2s.rspec]:
{{{
$ stitcher.py createsliver IG-ST-1 IG-ST-1-al2s.rspec -o
14:43:34 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
14:43:34 INFO    : Reading slice IG-ST-1 credential...
14:43:34 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2015-01-12 15:59:59 UTC
14:43:34 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
14:43:34 INFO    : Calling SCS...
14:43:39 INFO    : Multi-AM reservation will include resources from these aggregates:
14:43:39 INFO    : 	<Aggregate cenic-ig>
14:43:39 INFO    : 	<Aggregate gpo-ig>
14:43:39 INFO    : 	<Aggregate oess>
14:43:39 INFO    : 	<Aggregate ion>
14:43:39 INFO    : Stitcher doing createsliver at <Aggregate cenic-ig>...
14:43:58 INFO    : ... Allocation at <Aggregate cenic-ig> complete.
14:43:58 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
14:44:14 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
14:44:14 INFO    : Stitcher doing createsliver at <Aggregate oess>...
14:44:19 INFO    : ... Allocation at <Aggregate oess> complete.
14:44:19 INFO    : Stitcher doing createsliver at <Aggregate ion>...
14:45:05 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
14:45:05 INFO    : Pausing 30 seconds to let circuit become ready...
14:45:43 INFO    : DCN circuit 146311 is ready at <Aggregate ion>
14:45:50 INFO    : ... Allocation at <Aggregate ion> complete.
14:45:50 INFO    : All aggregates are complete.
14:45:50 INFO    : Your resources expire at 2015-01-11T19:33:39 (UTC). 
14:45:50 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/CENIC/IG-ST-1-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
}}}

Determined login information at each CENIC and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-1 -a cenic-ig
  ....
ig-cenic's geni_status is: ready 
User lnevers logs in to ig-cenic using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.cenic.net

$ readyToLogin.py IG-ST-1 -a gpo-ig
  ....
ig-gpo's geni_status is: changing 
User lnevers logs in to ig-gpo using:
	ssh -p 32570  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com
}}}

=== Measurements ===

'''Iperf InstaGENI GPO VM to InstaGENI CENIC VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2015-01-08''

__One Client_
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   140 MBytes  19.6 Mbits/sec
}}}

__Five Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec  35.0 MBytes  4.89 Mbits/sec
[  7]  0.0-60.5 sec  23.9 MBytes  3.31 Mbits/sec
[  5]  0.0-60.7 sec  32.2 MBytes  4.46 Mbits/sec
[  6]  0.0-60.8 sec  28.2 MBytes  3.90 Mbits/sec
[  4]  0.0-61.0 sec  23.5 MBytes  3.23 Mbits/sec
[SUM]  0.0-61.0 sec   143 MBytes  19.6 Mbits/sec
}}}

__Ten Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  8]  0.0-60.1 sec  9.50 MBytes  1.33 Mbits/sec
[  5]  0.0-60.3 sec  14.1 MBytes  1.97 Mbits/sec
[ 10]  0.0-60.3 sec  16.6 MBytes  2.31 Mbits/sec
[  6]  0.0-60.5 sec  16.0 MBytes  2.22 Mbits/sec
[ 11]  0.0-60.6 sec  11.4 MBytes  1.57 Mbits/sec
[  9]  0.0-60.6 sec  9.62 MBytes  1.33 Mbits/sec
[  4]  0.0-60.8 sec  14.8 MBytes  2.04 Mbits/sec
[  3]  0.0-61.6 sec  19.1 MBytes  2.61 Mbits/sec
[  7]  0.0-62.0 sec  20.8 MBytes  2.81 Mbits/sec
[ 12]  0.0-62.7 sec  12.8 MBytes  1.71 Mbits/sec
[SUM]  0.0-62.7 sec   145 MBytes  19.3 Mbits/sec
}}}

'''Iperf InstaGENI GPO VM to InstaGENI CENIC VM (UDP) - UDP buffer size:  224 KByte (default) '''
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512807 datagrams
[  3] Server Report:
[  3]  0.0-60.3 sec   139 MBytes  19.4 Mbits/sec   9.177 ms 413453/512803 (81%)
[  3]  0.0-60.3 sec  1 datagrams received out-of-order
}}}

'''Ping from InstaGENI GPO VM to the InstaGENI CENIC VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59097ms
rtt min/avg/max/mdev = 79.298/79.729/82.428/0.530 ms
}}}


'''Iperf InstaGENI CENIC VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2015-01-08''

__One Client_
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   140 MBytes  19.6 Mbits/sec
}}}

__Five Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec  30.6 MBytes  4.27 Mbits/sec
[  4]  0.0-60.3 sec  40.6 MBytes  5.65 Mbits/sec
[  5]  0.0-60.3 sec  26.4 MBytes  3.67 Mbits/sec
[  7]  0.0-60.7 sec  17.8 MBytes  2.45 Mbits/sec
[  6]  0.0-61.1 sec  27.8 MBytes  3.81 Mbits/sec
[SUM]  0.0-61.1 sec   143 MBytes  19.7 Mbits/sec
}}}

__Ten Clients__
{{{
[ 11]  0.0-60.3 sec  10.5 MBytes  1.46 Mbits/sec
[ 12]  0.0-60.4 sec  19.5 MBytes  2.71 Mbits/sec
[  7]  0.0-60.6 sec  13.8 MBytes  1.90 Mbits/sec
[  6]  0.0-60.7 sec  17.4 MBytes  2.40 Mbits/sec
[  4]  0.0-60.9 sec  14.5 MBytes  2.00 Mbits/sec
[  5]  0.0-61.2 sec  16.1 MBytes  2.21 Mbits/sec
[  9]  0.0-61.5 sec  11.0 MBytes  1.50 Mbits/sec
[ 10]  0.0-61.7 sec  12.6 MBytes  1.72 Mbits/sec
[  3]  0.0-62.0 sec  18.2 MBytes  2.47 Mbits/sec
[  8]  0.0-62.0 sec  13.0 MBytes  1.76 Mbits/sec
[SUM]  0.0-62.0 sec   147 MBytes  19.8 Mbits/sec
}}}

'''Iperf InstaGENI CENIC VM to GPO InstaGENI VM (UDP)  - UDP buffer size:  224 KByte (default) '''
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512761 datagrams
[  3] Server Report:
[  3]  0.0-60.2 sec   139 MBytes  19.4 Mbits/sec  14.389 ms 413535/512760 (81%)
[  3]  0.0-60.2 sec  1 datagrams received out-of-order
}}}

'''Ping from InstaGENI CENIC VM to GPO InstaGENI VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59099ms
rtt min/avg/max/mdev = 79.282/79.827/87.192/1.060 ms
}}}


== IG-ST-2 New Site to GPO IG Loop topology ==

Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CENIC/IG-ST-2.rspec IG-ST-2.rspec]:
{{{
$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
15:07:24 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
15:07:24 INFO    : Reading slice IG-ST-2 credential...
15:07:24 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2015-01-12 15:38:58 UTC
15:07:24 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
15:07:24 INFO    : Calling SCS...
15:07:29 INFO    : Multi-AM reservation will include resources from these aggregates:
15:07:29 INFO    : 	<Aggregate cenic-ig>
15:07:29 INFO    : 	<Aggregate gpo-ig>
15:07:29 INFO    : 	<Aggregate oess>
15:07:29 INFO    : 	<Aggregate ion>
15:07:29 INFO    : Stitcher doing createsliver at <Aggregate cenic-ig>...
15:07:54 INFO    : ... Allocation at <Aggregate cenic-ig> complete.
15:07:54 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
15:08:13 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
15:08:13 INFO    : Stitcher doing createsliver at <Aggregate oess>...
15:08:21 INFO    : ... Allocation at <Aggregate oess> complete.
15:08:21 INFO    : Stitcher doing createsliver at <Aggregate ion>...
15:09:07 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
15:09:07 INFO    : Pausing 30 seconds to let circuit become ready...
15:09:45 INFO    : Pausing 30 seconds to let circuit become ready...
15:10:23 INFO    : DCN circuit 146321 is ready at <Aggregate ion>
15:10:23 INFO    : DCN circuit 146331 is ready at <Aggregate ion>
15:10:30 INFO    : ... Allocation at <Aggregate ion> complete.
15:10:30 INFO    : All aggregates are complete.
15:10:30 INFO    : Your resources expire at 2015-01-11T19:57:29 (UTC). 
15:10:30 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/CENIC/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
}}}

Determined login information at each CENIC and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-2 -a cenic-ig
  ....
ig-cenic's geni_status is: ready 
User lnevers logs in to ig-cenic using:
	ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.cenic.net

$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 33338  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com
}}}

Login to GPO host and ping the remote on each of the two interfaces.  Below is the ping output for the GPO site:
{{{
$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q"
1. Find login Info for hosts in slice IG-ST-2
2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo

PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59089ms
rtt min/avg/max/mdev = 78.567/80.312/160.068/10.385 ms
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59083ms
rtt min/avg/max/mdev = 78.675/80.378/158.896/10.230 ms
... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo
}}}

== IG-ST-3 IG-ST-3 New Site 3 node linear topology ==

Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CENIC/IG-ST-3.rspec IG-ST-3.rspec]:
{{{
$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
15:20:03 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
15:20:03 INFO    : Reading slice IG-ST-3 credential...
15:20:03 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2015-01-12 17:19:21 UTC
15:20:03 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
15:20:03 INFO    : Calling SCS...
15:20:10 INFO    : Multi-AM reservation will include resources from these aggregates:
15:20:10 INFO    : 	<Aggregate ukypks2-ig>
15:20:10 INFO    : 	<Aggregate gpo-ig>
15:20:10 INFO    : 	<Aggregate cenic-ig>
15:20:10 INFO    : 	<Aggregate oess>
15:20:10 INFO    : 	<Aggregate ion>
15:20:10 INFO    : Stitcher doing createsliver at <Aggregate ukypks2-ig>...
15:20:28 INFO    : ... Allocation at <Aggregate ukypks2-ig> complete.
15:20:28 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
15:20:45 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
15:20:45 INFO    : Stitcher doing createsliver at <Aggregate cenic-ig>...
15:21:05 INFO    : ... Allocation at <Aggregate cenic-ig> complete.
15:21:05 INFO    : Stitcher doing createsliver at <Aggregate oess>...
15:21:13 INFO    : ... Allocation at <Aggregate oess> complete.
15:21:13 INFO    : Stitcher doing createsliver at <Aggregate ion>...
15:21:59 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
15:21:59 INFO    : Pausing 30 seconds to let circuit become ready...
15:22:36 INFO    : Pausing 30 seconds to let circuit become ready...
15:23:14 INFO    : DCN circuit 146381 is ready at <Aggregate ion>
15:23:14 INFO    : DCN circuit 146371 is ready at <Aggregate ion>
15:23:21 INFO    : ... Allocation at <Aggregate ion> complete.
15:23:21 INFO    : All aggregates are complete.
15:23:21 INFO    : Your resources expire at 2015-01-11T20:10:10 (UTC). 
15:23:21 INFO    : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/CENIC/IG-ST-3-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
}}}

Determined login information the CENIC host:
{{{
$ readyToLogin.py IG-ST-3 -a cenic-ig
  ....
ig-cenic's geni_status is: ready 
User lnevers logs in to ig-cenic using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.cenic.net

}}}
Login to the CENIC host and ping each remote:
{{{
#ping GPO IG
[lnevers@ig-cenic ~]$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59086ms
rtt min/avg/max/mdev = 78.718/80.387/158.438/10.169 ms

# ping UKYPKS2 IG
[lnevers@ig-cenic ~]$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59075ms
rtt min/avg/max/mdev = 67.928/69.336/141.706/9.429 ms
}}}

== IG-ST-4 New Site to GPO EG interoperability ==

Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CENIC/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

{{{
10:32:18 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
10:32:18 INFO    : Reading slice IG-ST-4 credential...
10:32:19 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2015-01-15 20:29:27 UTC
10:32:19 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
10:32:19 INFO    : Calling SCS...
10:32:23 INFO    : Multi-AM reservation will include resources from these aggregates:
10:32:23 INFO    : 	<Aggregate cenic-ig>
10:32:23 INFO    : 	<Aggregate oess>
10:32:23 INFO    : 	<Aggregate gpo-eg>
10:32:23 INFO    : 	<Aggregate ion>
10:32:23 INFO    : Stitcher doing createsliver at <Aggregate cenic-ig>...
10:32:45 INFO    : ... Allocation at <Aggregate cenic-ig> complete.
10:32:45 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
10:32:54 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
10:32:54 INFO    : Stitcher doing createsliver at <Aggregate oess>...
10:32:59 INFO    : ... Allocation at <Aggregate oess> complete.
10:32:59 INFO    : Stitcher doing createsliver at <Aggregate ion>...
10:33:45 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
10:33:45 INFO    : Pausing 30 seconds to let circuit become ready...
10:34:22 INFO    : DCN circuit 146591 is ready at <Aggregate ion>
10:34:29 INFO    : ... Allocation at <Aggregate ion> complete.
10:34:29 INFO    : All aggregates are complete.
10:34:29 INFO    : Your resources expire at 2015-01-15T15:22:23 (UTC). 
10:34:29 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/CENIC/IG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
}}}

Determined login information at each CENIC and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-4 -a cenic-ig
  ....
ig-cenic's geni_status is: ready 
User lnevers logs in to ig-cenic using:
	ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.cenic.net

$ readyToLogin.py IG-ST-4 -a gpo-eg
  ....
eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.5
}}}

=== Measurements ===

'''Iperf ExoGENI GPO VM to InstaGENI CENIC VM (TCP) - TCP window size: 85.0 KByte (default)'''

''Collected: 2015-01-09''

__One Client_
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   138 MBytes  19.3 Mbits/sec
}}}

__Five Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec  28.0 MBytes  3.91 Mbits/sec
[  6]  0.0-60.5 sec  29.4 MBytes  4.08 Mbits/sec
[  7]  0.0-60.7 sec  29.1 MBytes  4.03 Mbits/sec
[  4]  0.0-60.8 sec  28.6 MBytes  3.95 Mbits/sec
[  5]  0.0-60.9 sec  28.5 MBytes  3.92 Mbits/sec
[SUM]  0.0-60.9 sec   144 MBytes  19.8 Mbits/sec
}}}

__Ten Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.3 sec  21.2 MBytes  2.95 Mbits/sec
[ 10]  0.0-60.4 sec  15.0 MBytes  2.08 Mbits/sec
[  9]  0.0-60.5 sec  14.0 MBytes  1.94 Mbits/sec
[ 11]  0.0-60.5 sec  14.5 MBytes  2.01 Mbits/sec
[  3]  0.0-60.6 sec  13.2 MBytes  1.83 Mbits/sec
[ 12]  0.0-60.6 sec  13.6 MBytes  1.89 Mbits/sec
[  4]  0.0-60.7 sec  14.5 MBytes  2.00 Mbits/sec
[  6]  0.0-61.2 sec  16.5 MBytes  2.26 Mbits/sec
[  8]  0.0-61.3 sec  14.9 MBytes  2.03 Mbits/sec
[  5]  0.0-61.4 sec  9.75 MBytes  1.33 Mbits/sec
[SUM]  0.0-61.4 sec   147 MBytes  20.1 Mbits/sec
}}}

'''Iperf ExoGENI GPO VM to InstaGENI CENIC VM (UDP) - UDP buffer size:  208 KByte (default) '''
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512793 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec   0.135 ms 413436/512790 (81%)
[  3]  0.0-60.1 sec  1 datagrams received out-of-order
}}}

'''Ping from ExoGENI GPO VM to the InstaGENI CENIC VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59093ms
rtt min/avg/max/mdev = 79.384/80.221/90.089/1.625 ms
}}}


'''Iperf InstaGENI CENIC VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2015-01-09''

__One Client_
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   130 MBytes  18.1 Mbits/sec
}}}

__Five Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.2 sec  30.0 MBytes  4.18 Mbits/sec
[  6]  0.0-60.2 sec  22.8 MBytes  3.17 Mbits/sec
[  4]  0.0-60.2 sec  24.0 MBytes  3.34 Mbits/sec
[  3]  0.0-60.6 sec  37.8 MBytes  5.23 Mbits/sec
[  7]  0.0-60.8 sec  28.4 MBytes  3.92 Mbits/sec
[SUM]  0.0-60.8 sec   143 MBytes  19.7 Mbits/sec
}}}

__Ten Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.1 sec  13.2 MBytes  1.85 Mbits/sec
[  3]  0.0-60.2 sec  13.8 MBytes  1.92 Mbits/sec
[  4]  0.0-60.3 sec  19.2 MBytes  2.68 Mbits/sec
[ 10]  0.0-60.3 sec  16.4 MBytes  2.28 Mbits/sec
[  8]  0.0-60.4 sec  10.8 MBytes  1.49 Mbits/sec
[  9]  0.0-60.4 sec  10.6 MBytes  1.48 Mbits/sec
[  6]  0.0-60.4 sec  13.8 MBytes  1.91 Mbits/sec
[ 12]  0.0-60.4 sec  14.2 MBytes  1.98 Mbits/sec
[  7]  0.0-61.5 sec  18.1 MBytes  2.47 Mbits/sec
[ 11]  0.0-61.8 sec  13.2 MBytes  1.80 Mbits/sec
[SUM]  0.0-61.8 sec   143 MBytes  19.5 Mbits/sec
}}}

'''Iperf InstaGENI CENIC VM to ExoGENI GPO VM (UDP)  - UDP buffer size:  224 KByte (default) '''
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512777 datagrams
[  3] Server Report:
[  3]  0.0-60.3 sec   139 MBytes  19.4 Mbits/sec  14.652 ms 413538/512776 (81%)
}}}

'''Ping from InstaGENI CENIC VM to ExoGENI GPO VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59099ms
rtt min/avg/max/mdev = 79.328/79.940/84.804/0.738 ms
}}}

== IG-ST-5 Site Information ==

Various pages include stitching information for a site.  Each of the following were verified for this site:
 
 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/CENICInstaGENI#GENINetworkStitching CENIC Aggregate] page.
 
 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs].

 3. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.

 4. Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. 

== IG-ST-6 New Site !OpenFlow topology ==

Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/CENIC/IG-ST-6.rspec IG-ST-6.rspec]:
{{{
$ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o
10:59:53 INFO    : Configured logging from file /home/lnevers/gcf-2.8-pre3/src/gcf/stitcher_logging.conf
10:59:53 INFO    : Reading slice IG-ST-6 credential...
10:59:53 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2015-02-14 00:00:00 UTC
10:59:53 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
10:59:53 INFO    : Calling SCS...
10:59:56 INFO    : Multi-AM reservation will include resources from these aggregates:
10:59:56 INFO    : 	<Aggregate cenic-ig>
10:59:56 INFO    : 	<Aggregate gpo-ig>
10:59:56 INFO    : 	<Aggregate i2-al2s>
10:59:56 INFO    : 	<Aggregate ion>
10:59:56 INFO    : Stitcher doing createsliver at <Aggregate cenic-ig>...
11:00:14 INFO    : ... Allocation at <Aggregate cenic-ig> complete.
11:00:14 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:00:29 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:00:29 INFO    : Stitcher doing createsliver at <Aggregate i2-al2s>...
11:00:33 INFO    : ... Allocation at <Aggregate i2-al2s> complete.
11:00:33 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:01:19 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:01:19 INFO    : Pausing 30 seconds to let circuit become ready...
11:01:56 INFO    : DCN circuit 150331 is ready at <Aggregate ion>
11:02:03 INFO    : ... Allocation at <Aggregate ion> complete.
11:02:03 INFO    : All aggregates are complete.
11:02:03 INFO    : Your resources expire at 2015-02-13T15:49:56 (UTC). 
11:02:03 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/CENIC/IG-ST-6-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-6 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
}}}

Determined login information at each CENIC and GPO aggregate:
{{{
$ readyToLogin --useSliceAggregates IG-ST-6
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

ig-cenic's geni_status is: ready 
User lnevers logs in to ig-cenic using:
	ssh -p 30266  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.cenic.net
}}}

=== Measurements ===

'''Iperf InstaGENI GPO VM to InstaGENI CENIC VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2015-01-26''

__One Client__
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   124 MBytes  17.3 Mbits/sec
}}}

__Five Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-59.9 sec  32.4 MBytes  4.53 Mbits/sec
[  5]  0.0-60.2 sec  27.1 MBytes  3.78 Mbits/sec
[  3]  0.0-60.2 sec  19.9 MBytes  2.77 Mbits/sec
[  7]  0.0-60.7 sec  23.6 MBytes  3.27 Mbits/sec
[  4]  0.0-60.9 sec  32.1 MBytes  4.42 Mbits/sec
[SUM]  0.0-60.9 sec   135 MBytes  18.6 Mbits/sec
}}}

__Ten Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.2 sec  12.0 MBytes  1.67 Mbits/sec
[  9]  0.0-60.2 sec  9.50 MBytes  1.32 Mbits/sec
[  3]  0.0-60.6 sec  23.0 MBytes  3.18 Mbits/sec
[ 11]  0.0-60.8 sec  13.5 MBytes  1.86 Mbits/sec
[ 12]  0.0-61.1 sec  13.1 MBytes  1.80 Mbits/sec
[  7]  0.0-61.1 sec  15.8 MBytes  2.16 Mbits/sec
[ 10]  0.0-61.1 sec  17.9 MBytes  2.45 Mbits/sec
[  8]  0.0-61.6 sec  11.6 MBytes  1.58 Mbits/sec
[  6]  0.0-61.7 sec  15.8 MBytes  2.14 Mbits/sec
[  5]  0.0-61.7 sec  11.8 MBytes  1.60 Mbits/sec
[SUM]  0.0-61.7 sec   144 MBytes  19.5 Mbits/sec
}}}

'''Iperf InstaGENI GPO VM to InstaGENI CENIC VM (UDP) - UDP buffer size:  224 KByte (default) '''
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512801 datagrams
[  3] Server Report:
[  3]  0.0-60.3 sec   139 MBytes  19.3 Mbits/sec  19.911 ms 413886/512798 (81%)
[  3]  0.0-60.3 sec  74 datagrams received out-of-order
}}}

'''Ping from InstaGENI GPO VM to InstaGENI CENIC VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59100ms
rtt min/avg/max/mdev = 79.393/94.882/724.086/87.438 ms
}}}


'''Iperf InstaGENI CENIC VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)'''

''Collected: 2015-01-26''

__One Client__
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.3 sec   122 MBytes  17.0 Mbits/sec
}}}

__Five Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  34.1 MBytes  4.77 Mbits/sec
[  7]  0.0-60.1 sec  35.9 MBytes  5.01 Mbits/sec
[  5]  0.0-60.4 sec  25.1 MBytes  3.49 Mbits/sec
[  6]  0.0-61.1 sec  26.4 MBytes  3.62 Mbits/sec
[  3]  0.0-61.2 sec  19.6 MBytes  2.69 Mbits/sec
[SUM]  0.0-61.2 sec   141 MBytes  19.3 Mbits/sec
}}}

__Ten Clients__
{{{
[ ID] Interval       Transfer     Bandwidth
[ 10]  0.0-60.0 sec  8.38 MBytes  1.17 Mbits/sec
[  9]  0.0-60.1 sec  14.2 MBytes  1.99 Mbits/sec
[ 12]  0.0-60.2 sec  25.4 MBytes  3.54 Mbits/sec
[  4]  0.0-60.3 sec  10.1 MBytes  1.41 Mbits/sec
[  6]  0.0-60.7 sec  18.0 MBytes  2.49 Mbits/sec
[  3]  0.0-60.8 sec  20.0 MBytes  2.76 Mbits/sec
[  8]  0.0-60.9 sec  7.88 MBytes  1.08 Mbits/sec
[ 11]  0.0-61.2 sec  18.1 MBytes  2.48 Mbits/sec
[  5]  0.0-61.4 sec  9.88 MBytes  1.35 Mbits/sec
[  7]  0.0-62.0 sec  11.9 MBytes  1.61 Mbits/sec
[SUM]  0.0-62.0 sec   144 MBytes  19.5 Mbits/sec
}}}

'''Iperf InstaGENI CENIC VM to InstaGENI GPO VM (UDP)  - UDP buffer size:  224 KByte (default) '''
{{{
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512786 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   136 MBytes  19.0 Mbits/sec  14.380 ms 415778/512784 (81%)
[  3]  0.0-60.1 sec  39 datagrams received out-of-order
}}}

'''Ping from InstaGENI CENIC VM to InstaGENI GPO VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59093ms
rtt min/avg/max/mdev = 79.231/85.945/261.767/28.039 ms
}}}
------
{{{
#!html
Email <a href="mailto:help@geni.net"> help@geni.net </a> for GENI support or email <a href="mailto:luisa.nevers@bbn.com">me</a> with feedback on this page!
}}}