4 | | The configuration described here is in addition to the [wiki:OpenFlow/CampusTopology basic campus topology] setup for the Plastic slices project, but uses the same infrastructure, i.e. the host in the diagram is one of the existing myPlc hosts that is connected to an !OpenFlow switch in your campus. Currently only HP switches can support the Pathlet experiment, so if you only have an NEC or a quanta switch, please let us know. After the initial setup described in this page, only routine experimental support is expected from participating site contacts participating in this experiment (e.g. authorizing opt-in traffic). We will use this page to keep track of all relevant information for this experiment (configuration, IP addresses etc). |
| 4 | The configuration described here is in addition to the [wiki:OpenFlow/CampusTopology basic campus topology] setup for the Plastic slices project, but uses the same infrastructure, i.e. the host in the diagram is one of the existing myPlc hosts that is connected to an !OpenFlow switch in your campus. Currently only HP switches can support the Pathlet experiment, so if you only have an NEC or a quanta switch, please let us know. After the initial setup described in this page, only routine experimental support is expected from participating site contacts (e.g. authorizing opt-in traffic). We will use this page to keep track of all relevant information for this experiment (configuration, IP addresses etc). |