[[PageOutline]]

This page is located at http://groups.geni.net/geni/wiki/GeniDesktop/Summer_Camp_2015

= GENI Desktop Tutorial (Summer Camp 2015 UConn) =

This tutorial consists of three parts:

 * Basic GENI Desktop Operations
 * Brief Introduction to OpenFlow
 * Flow Installation and Monitoring in GENI Desktop

== I. Basic GENI Desktop Operations ==

A general tutorial for GENI Desktop can be found at [http://groups.geni.net/geni/wiki/GENIExperimenter/Tutorials/GENIDesktop http://groups.geni.net/geni/wiki/GENIExperimenter/Tutorials/GENIDesktop]

 * Part I: Design/Setup

     Follow the instructions of Part I: Design/Setup of the tutorial to create a three-node topology.

 * Part II: Excute
     *  Step A: Copy a file to the selected nodes.
     *  Step B: Login to the selected nodes.
     *  Step C: Run a command on the selected nodes.
     *  Step D: Copy a file from the selected nodes.
     *  Step E: Monitor the traffic of the selected interface.

 * Part III: Finish
     *  Teardown experiment

== II. Introduction to OpenFlow ==

A brief introduction to OpenFlow can be found at [   ]


== III. Flow Installation and Monitoring ==

 * Part I: Design/Setup
    * Step A: Create two slices, one for the controller and one for an experiment using OVS nodes.
      * Pick "Public IP address" for the controller node.
      * The slice with OVS nodes consists of three OVS nodes and two Xen nodes.
    * Step B: Figure out the IP
    * Step C: Run an initialization script to point

 * Part II: Execute
    * Install, list, and delete flows on the experiment
    * Monitor per-flow performance

 * Part III: Finish
    * Teardown experiment