Navigation: [wiki:GeniDesktop/Manual/gdfeatures Back]/[wiki:GeniDesktop/Manual Index] [[PageOutline]] = GENIDesktop Archive Module = = GENIDesktop Archive Viewer = The GENIDesktop provides a tool that will help view,download and visualize all archived Data points created using the GENIDesktop Archive module. In order to view these archived datapoints, please download and install the tool [https://www.vagrantup.com/downloads.html Vagrant from this link]. You will also need to download the [http://groups.geni.net/geni/raw-attachment/wiki/GeniDesktop/Manual/gdfeatures/gd_archive/Vagrantfile attached Vagrant file] Vagrant uses [http://virtualbox.org VirtualBox] under the hood. If you do not have Virtualbox already installed on your machine, Vagrant should try to do that for you when vagrant is run the first time. In case it fails to install virtualbox , you may have to install Virtualbox manually by downloading (and install) it from the [http://virtualbox.org VirtualBox Website] In the directory you had downloaded the attached Vagrantfile, please open up a terminal window and run the command [[br]] '''NOTE: If Using any version of Windows OS as your host machine, you will need to open up a command prompt window in administrator mode (Run as Administrator). Not doing so will result in a failure in setting up the VM.''' [[br]] {{{ vagrant up }}} This will take some time if run for the first time since it will try to download a Ubuntu 14.04 64 bit image that is used as a base. Once the setup is complete as shown below {{{ Bringing machine 'default' up with 'virtualbox' provider... ==> default: Checking if box 'ubuntu/trusty64' is up to date... ==> default: Clearing any previously set network interfaces... ==> default: Preparing network interfaces based on configuration... default: Adapter 1: nat default: Adapter 2: hostonly ==> default: Forwarding ports... default: 80 (guest) => 8888 (host) (adapter 1) default: 22 (guest) => 2222 (host) (adapter 1) ==> default: Booting VM... ==> default: Waiting for machine to boot. This may take a few minutes... default: SSH address: 127.0.0.1:2222 default: SSH username: vagrant default: SSH auth method: private key default: Warning: Remote connection disconnect. Retrying... default: default: Vagrant insecure key detected. Vagrant will automatically replace default: this with a newly generated keypair for better security. default: default: Inserting generated public key within guest... default: Removing insecure key from the guest if it's present... default: Key inserted! Disconnecting and reconnecting using new SSH key... ==> default: Machine booted and ready! ==> default: Checking for guest additions in VM... default: The guest additions on this VM do not match the installed version of default: VirtualBox! In most cases this is fine, but in rare cases it can default: prevent things such as shared folders from working properly. If you see default: shared folder errors, please make sure the guest additions within the default: virtual machine match the version of VirtualBox you have installed on default: your host and reload your VM. default: default: Guest Additions Version: 4.3.36 default: VirtualBox Version: 5.0 ==> default: Configuring and enabling network interfaces... ==> default: Mounting shared folders... default: /vagrant => C:/Users/Hussam/Downloads ==> default: Running provisioner: shell... default: Running: C:/Users/Hussam/AppData/Local/Temp/vagrant-shell20160426-5872-ud1usx.sh ==> default: stdin: is not a tty ==> default: Get:1 http://security.ubuntu.com trusty-security InRelease [65.9 kB] ==> default: Ign http://archive.ubuntu.com trusty InRelease ==> default: Get:2 http://archive.ubuntu.com trusty-updates InRelease [65.9 kB] ==> default: Get:3 http://security.ubuntu.com trusty-security/main Sources [112 kB] ==> default: Get:4 http://archive.ubuntu.com trusty-backports InRelease [65.9 kB] ==> default: Get:5 http://security.ubuntu.com trusty-security/universe Sources [35.9 kB] ==> default: Hit http://archive.ubuntu.com trusty Release.gpg ==> default: Get:6 http://security.ubuntu.com trusty-security/main amd64 Packages [457 kB] ==> default: Get:7 http://archive.ubuntu.com trusty-updates/main Sources [273 kB] ==> default: Get:8 http://archive.ubuntu.com trusty-updates/restricted Sources [5,352 B] ==> default: Get:9 http://security.ubuntu.com trusty-security/universe amd64 Packages [127 kB] ==> default: Get:10 http://archive.ubuntu.com trusty-updates/universe Sources [154 kB] ==> default: Get:11 http://security.ubuntu.com trusty-security/main Translation-en [251 kB] ==> default: Get:12 http://archive.ubuntu.com trusty-updates/multiverse Sources [5,928 B] ==> default: Get:13 http://archive.ubuntu.com trusty-updates/main amd64 Packages [755 kB] ==> default: Get:14 http://security.ubuntu.com trusty-security/universe Translation-en [74.9 kB] ==> default: Get:15 http://archive.ubuntu.com trusty-updates/restricted amd64 Packages [15.9 kB] ==> default: Get:16 http://archive.ubuntu.com trusty-updates/universe amd64 Packages [359 kB] ==> default: Get:17 http://archive.ubuntu.com trusty-updates/multiverse amd64 Packages [13.2 kB] ==> default: Get:18 http://archive.ubuntu.com trusty-updates/main Translation-en [378 kB] ==> default: Get:19 http://archive.ubuntu.com trusty-updates/multiverse Translation-en [7,227 B] ==> default: Get:20 http://archive.ubuntu.com trusty-updates/restricted Translation-en [3,699 B] ==> default: Get:21 http://archive.ubuntu.com trusty-updates/universe Translation-en [188 kB] ==> default: Get:22 http://archive.ubuntu.com trusty-backports/main Sources [8,948 B] ==> default: Get:23 http://archive.ubuntu.com trusty-backports/restricted Sources [28 B] ==> default: Get:24 http://archive.ubuntu.com trusty-backports/universe Sources [34.5 kB] ==> default: Get:25 http://archive.ubuntu.com trusty-backports/multiverse Sources [1,898 B] ==> default: Get:26 http://archive.ubuntu.com trusty-backports/main amd64 Packages [9,998 B] ==> default: Get:27 http://archive.ubuntu.com trusty-backports/restricted amd64 Packages [28 B] ==> default: Get:28 http://archive.ubuntu.com trusty-backports/universe amd64 Packages [41.5 kB] ==> default: Get:29 http://archive.ubuntu.com trusty-backports/multiverse amd64 Packages [1,571 B] ==> default: Get:30 http://archive.ubuntu.com trusty-backports/main Translation-en [5,986 B] ==> default: Get:31 http://archive.ubuntu.com trusty-backports/multiverse Translation-en [1,215 B] ==> default: Get:32 http://archive.ubuntu.com trusty-backports/restricted Translation-en [28 B] ==> default: Get:33 http://archive.ubuntu.com trusty-backports/universe Translation-en [36.0 kB] ==> default: Hit http://archive.ubuntu.com trusty Release ==> default: Get:34 http://archive.ubuntu.com trusty/main Sources [1,064 kB] ==> default: Get:35 http://archive.ubuntu.com trusty/restricted Sources [5,433 B] ==> default: Get:36 http://archive.ubuntu.com trusty/universe Sources [6,399 kB] ==> default: Get:37 http://archive.ubuntu.com trusty/multiverse Sources [174 kB] ==> default: Hit http://archive.ubuntu.com trusty/main amd64 Packages ==> default: Hit http://archive.ubuntu.com trusty/restricted amd64 Packages ==> default: Hit http://archive.ubuntu.com trusty/universe amd64 Packages ==> default: Hit http://archive.ubuntu.com trusty/multiverse amd64 Packages ==> default: Hit http://archive.ubuntu.com trusty/main Translation-en ==> default: Hit http://archive.ubuntu.com trusty/multiverse Translation-en ==> default: Hit http://archive.ubuntu.com trusty/restricted Translation-en ==> default: Hit http://archive.ubuntu.com trusty/universe Translation-en ==> default: Ign http://archive.ubuntu.com trusty/main Translation-en_US ==> default: Ign http://archive.ubuntu.com trusty/multiverse Translation-en_US ==> default: Ign http://archive.ubuntu.com trusty/restricted Translation-en_US ==> default: Ign http://archive.ubuntu.com trusty/universe Translation-en_US ==> default: Fetched 11.2 MB in 12s (881 kB/s) ==> default: Reading package lists... ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: Reading state information... ==> default: wget is already the newest version. ==> default: The following extra packages will be installed: ==> default: apache2-bin apache2-data fonts-dejavu fonts-dejavu-extra git-man ==> default: libapache2-mod-php5 libapr1 libaprutil1 libaprutil1-dbd-sqlite3 ==> default: libaprutil1-ldap libdbi1 liberror-perl librrd4 php5-cli php5-common ==> default: php5-json php5-readline ssl-cert ttf-dejavu ttf-dejavu-core ttf-dejavu-extra ==> default: Suggested packages: ==> default: apache2-doc apache2-suexec-pristine apache2-suexec-custom apache2-utils ==> default: git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk ==> default: gitweb git-arch git-bzr git-cvs git-mediawiki git-svn php-pear ==> default: php5-user-cache librrds-perl openssl-blacklist ==> default: The following NEW packages will be installed: ==> default: apache2 apache2-bin apache2-data fonts-dejavu fonts-dejavu-extra git git-man ==> default: libapache2-mod-php5 libapr1 libaprutil1 libaprutil1-dbd-sqlite3 ==> default: libaprutil1-ldap libdbi1 liberror-perl librrd4 php-irods-prods php5 php5-cli ==> default: php5-common php5-json php5-readline php5-sqlite rrdtool ssl-cert ttf-dejavu ==> default: ttf-dejavu-core ttf-dejavu-extra ==> default: 0 upgraded, 27 newly installed, 0 to remove and 1 not upgraded. ==> default: Need to get 11.8 MB of archives. ==> default: After this operation, 56.8 MB of additional disk space will be used. ==> default: Get:1 http://archive.ubuntu.com/ubuntu/ trusty/main libapr1 amd64 1.5.0-1 [85.1 kB] ==> default: Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main libaprutil1 amd64 1.5.3-1 [76.4 kB] ==> default: Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main php5-json amd64 1.3.2-2build1 [34.4 kB] ==> default: Get:4 http://archive.ubuntu.com/ubuntu/ trusty-updates/main php5-common amd64 5.5.9+dfsg-1ubuntu4.16 [445 kB] ==> default: Get:5 http://archive.ubuntu.com/ubuntu/ trusty-updates/main php5-cli amd64 5.5.9+dfsg-1ubuntu4.16 [2,164 kB] ==> default: Get:6 http://archive.ubuntu.com/ubuntu/ trusty-updates/main php5-readline amd64 5.5.9+dfsg-1ubuntu4.16 [12.1 kB] ==> default: Get:7 http://archive.ubuntu.com/ubuntu/ trusty-updates/main php5-sqlite amd64 5.5.9+dfsg-1ubuntu4.16 [24.3 kB] ==> default: Get:8 http://archive.ubuntu.com/ubuntu/ trusty/main libaprutil1-dbd-sqlite3 amd64 1.5.3-1 [10.5 kB] ==> default: Get:9 http://archive.ubuntu.com/ubuntu/ trusty/main libaprutil1-ldap amd64 1.5.3-1 [8,634 B] ==> default: Get:10 http://archive.ubuntu.com/ubuntu/ trusty-updates/main apache2-bin amd64 2.4.7-1ubuntu4.9 [839 kB] ==> default: Get:11 http://archive.ubuntu.com/ubuntu/ trusty-updates/main apache2-data all 2.4.7-1ubuntu4.9 [160 kB] ==> default: Get:12 http://archive.ubuntu.com/ubuntu/ trusty-updates/main apache2 amd64 2.4.7-1ubuntu4.9 [87.5 kB] ==> default: Get:13 http://archive.ubuntu.com/ubuntu/ trusty/main fonts-dejavu-extra all 2.34-1ubuntu1 [1,736 kB] ==> default: Get:14 http://archive.ubuntu.com/ubuntu/ trusty/main fonts-dejavu all 2.34-1ubuntu1 [3,114 B] ==> default: Get:15 http://archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB] ==> default: Get:16 http://archive.ubuntu.com/ubuntu/ trusty-updates/main git-man all 1:1.9.1-1ubuntu0.3 [699 kB] ==> default: Get:17 http://archive.ubuntu.com/ubuntu/ trusty-updates/main git amd64 1:1.9.1-1ubuntu0.3 [2,586 kB] ==> default: Get:18 http://archive.ubuntu.com/ubuntu/ trusty-updates/main libapache2-mod-php5 amd64 5.5.9+dfsg-1ubuntu4.16 [2,207 kB] ==> default: Get:19 http://archive.ubuntu.com/ubuntu/ trusty/main libdbi1 amd64 0.9.0-1 [28.2 kB] ==> default: Get:20 http://archive.ubuntu.com/ubuntu/ trusty/main librrd4 amd64 1.4.7-2ubuntu5 [132 kB] ==> default: Get:21 http://archive.ubuntu.com/ubuntu/ trusty-updates/main php5 all 5.5.9+dfsg-1ubuntu4.16 [1,306 B] ==> default: Get:22 http://archive.ubuntu.com/ubuntu/ trusty/universe php-irods-prods all 3.3.0~beta1-1 [62.7 kB] ==> default: Get:23 http://archive.ubuntu.com/ubuntu/ trusty/main ssl-cert all 1.0.33 [16.6 kB] ==> default: Get:24 http://archive.ubuntu.com/ubuntu/ trusty/main ttf-dejavu-core all 2.34-1ubuntu1 [2,956 B] ==> default: Get:25 http://archive.ubuntu.com/ubuntu/ trusty/main ttf-dejavu-extra all 2.34-1ubuntu1 [3,104 B] ==> default: Get:26 http://archive.ubuntu.com/ubuntu/ trusty/main ttf-dejavu all 2.34-1ubuntu1 [2,806 B] ==> default: Get:27 http://archive.ubuntu.com/ubuntu/ trusty/main rrdtool amd64 1.4.7-2ubuntu5 [331 kB] ==> default: Preconfiguring packages ... ==> default: Fetched 11.8 MB in 24s (487 kB/s) ==> default: Selecting previously unselected package libapr1:amd64. ==> default: (Reading database ... 62991 files and directories currently installed.) ==> default: Preparing to unpack .../libapr1_1.5.0-1_amd64.deb ... ==> default: Unpacking libapr1:amd64 (1.5.0-1) ... ==> default: Selecting previously unselected package libaprutil1:amd64. ==> default: Preparing to unpack .../libaprutil1_1.5.3-1_amd64.deb ... ==> default: Unpacking libaprutil1:amd64 (1.5.3-1) ... ==> default: Selecting previously unselected package php5-json. ==> default: Preparing to unpack .../php5-json_1.3.2-2build1_amd64.deb ... ==> default: Unpacking php5-json (1.3.2-2build1) ... ==> default: Selecting previously unselected package php5-common. ==> default: Preparing to unpack .../php5-common_5.5.9+dfsg-1ubuntu4.16_amd64.deb ... ==> default: Unpacking php5-common (5.5.9+dfsg-1ubuntu4.16) ... ==> default: Selecting previously unselected package php5-cli. ==> default: Preparing to unpack .../php5-cli_5.5.9+dfsg-1ubuntu4.16_amd64.deb ... ==> default: Unpacking php5-cli (5.5.9+dfsg-1ubuntu4.16) ... ==> default: Selecting previously unselected package php5-readline. ==> default: Preparing to unpack .../php5-readline_5.5.9+dfsg-1ubuntu4.16_amd64.deb ... ==> default: Unpacking php5-readline (5.5.9+dfsg-1ubuntu4.16) ... ==> default: Selecting previously unselected package php5-sqlite. ==> default: Preparing to unpack .../php5-sqlite_5.5.9+dfsg-1ubuntu4.16_amd64.deb ... ==> default: Unpacking php5-sqlite (5.5.9+dfsg-1ubuntu4.16) ... ==> default: Selecting previously unselected package libaprutil1-dbd-sqlite3:amd64. ==> default: Preparing to unpack .../libaprutil1-dbd-sqlite3_1.5.3-1_amd64.deb ... ==> default: Unpacking libaprutil1-dbd-sqlite3:amd64 (1.5.3-1) ... ==> default: Selecting previously unselected package libaprutil1-ldap:amd64. ==> default: Preparing to unpack .../libaprutil1-ldap_1.5.3-1_amd64.deb ... ==> default: Unpacking libaprutil1-ldap:amd64 (1.5.3-1) ... ==> default: Selecting previously unselected package apache2-bin. ==> default: Preparing to unpack .../apache2-bin_2.4.7-1ubuntu4.9_amd64.deb ... ==> default: Unpacking apache2-bin (2.4.7-1ubuntu4.9) ... ==> default: Selecting previously unselected package apache2-data. ==> default: Preparing to unpack .../apache2-data_2.4.7-1ubuntu4.9_all.deb ... ==> default: Unpacking apache2-data (2.4.7-1ubuntu4.9) ... ==> default: Selecting previously unselected package apache2. ==> default: Preparing to unpack .../apache2_2.4.7-1ubuntu4.9_amd64.deb ... ==> default: Unpacking apache2 (2.4.7-1ubuntu4.9) ... ==> default: Selecting previously unselected package fonts-dejavu-extra. ==> default: Preparing to unpack .../fonts-dejavu-extra_2.34-1ubuntu1_all.deb ... ==> default: Unpacking fonts-dejavu-extra (2.34-1ubuntu1) ... ==> default: Selecting previously unselected package fonts-dejavu. ==> default: Preparing to unpack .../fonts-dejavu_2.34-1ubuntu1_all.deb ... ==> default: Unpacking fonts-dejavu (2.34-1ubuntu1) ... ==> default: Selecting previously unselected package liberror-perl. ==> default: Preparing to unpack .../liberror-perl_0.17-1.1_all.deb ... ==> default: Unpacking liberror-perl (0.17-1.1) ... ==> default: Selecting previously unselected package git-man. ==> default: Preparing to unpack .../git-man_1%3a1.9.1-1ubuntu0.3_all.deb ... ==> default: Unpacking git-man (1:1.9.1-1ubuntu0.3) ... ==> default: Selecting previously unselected package git. ==> default: Preparing to unpack .../git_1%3a1.9.1-1ubuntu0.3_amd64.deb ... ==> default: Unpacking git (1:1.9.1-1ubuntu0.3) ... ==> default: Selecting previously unselected package libapache2-mod-php5. ==> default: Preparing to unpack .../libapache2-mod-php5_5.5.9+dfsg-1ubuntu4.16_amd64.deb ... ==> default: Unpacking libapache2-mod-php5 (5.5.9+dfsg-1ubuntu4.16) ... ==> default: Selecting previously unselected package libdbi1:amd64. ==> default: Preparing to unpack .../libdbi1_0.9.0-1_amd64.deb ... ==> default: Unpacking libdbi1:amd64 (0.9.0-1) ... ==> default: Selecting previously unselected package librrd4. ==> default: Preparing to unpack .../librrd4_1.4.7-2ubuntu5_amd64.deb ... ==> default: Unpacking librrd4 (1.4.7-2ubuntu5) ... ==> default: Selecting previously unselected package php5. ==> default: Preparing to unpack .../php5_5.5.9+dfsg-1ubuntu4.16_all.deb ... ==> default: Unpacking php5 (5.5.9+dfsg-1ubuntu4.16) ... ==> default: Selecting previously unselected package php-irods-prods. ==> default: Preparing to unpack .../php-irods-prods_3.3.0~beta1-1_all.deb ... ==> default: Unpacking php-irods-prods (3.3.0~beta1-1) ... ==> default: Selecting previously unselected package ssl-cert. ==> default: Preparing to unpack .../ssl-cert_1.0.33_all.deb ... ==> default: Unpacking ssl-cert (1.0.33) ... ==> default: Selecting previously unselected package ttf-dejavu-core. ==> default: Preparing to unpack .../ttf-dejavu-core_2.34-1ubuntu1_all.deb ... ==> default: Unpacking ttf-dejavu-core (2.34-1ubuntu1) ... ==> default: Selecting previously unselected package ttf-dejavu-extra. ==> default: Preparing to unpack .../ttf-dejavu-extra_2.34-1ubuntu1_all.deb ... ==> default: Unpacking ttf-dejavu-extra (2.34-1ubuntu1) ... ==> default: Selecting previously unselected package ttf-dejavu. ==> default: Preparing to unpack .../ttf-dejavu_2.34-1ubuntu1_all.deb ... ==> default: Unpacking ttf-dejavu (2.34-1ubuntu1) ... ==> default: Selecting previously unselected package rrdtool. ==> default: Preparing to unpack .../rrdtool_1.4.7-2ubuntu5_amd64.deb ... ==> default: Unpacking rrdtool (1.4.7-2ubuntu5) ... ==> default: Processing triggers for man-db (2.6.7.1-1ubuntu1) ... ==> default: Processing triggers for ureadahead (0.100.0-16) ... ==> default: Processing triggers for ufw (0.34~rc-0ubuntu2) ... ==> default: Processing triggers for fontconfig (2.11.0-0ubuntu4.1) ... ==> default: Setting up libapr1:amd64 (1.5.0-1) ... ==> default: Setting up libaprutil1:amd64 (1.5.3-1) ... ==> default: Setting up libaprutil1-dbd-sqlite3:amd64 (1.5.3-1) ... ==> default: Setting up libaprutil1-ldap:amd64 (1.5.3-1) ... ==> default: Setting up apache2-bin (2.4.7-1ubuntu4.9) ... ==> default: Setting up apache2-data (2.4.7-1ubuntu4.9) ... ==> default: Setting up apache2 (2.4.7-1ubuntu4.9) ... ==> default: Enabling module mpm_event. ==> default: Enabling module authz_core. ==> default: Enabling module authz_host. ==> default: Enabling module authn_core. ==> default: Enabling module auth_basic. ==> default: Enabling module access_compat. ==> default: Enabling module authn_file. ==> default: Enabling module authz_user. ==> default: Enabling module alias. ==> default: Enabling module dir. ==> default: Enabling module autoindex. ==> default: Enabling module env. ==> default: Enabling module mime. ==> default: Enabling module negotiation. ==> default: Enabling module setenvif. ==> default: Enabling module filter. ==> default: Enabling module deflate. ==> default: Enabling module status. ==> default: Enabling conf charset. ==> default: Enabling conf localized-error-pages. ==> default: Enabling conf other-vhosts-access-log. ==> default: Enabling conf security. ==> default: Enabling conf serve-cgi-bin. ==> default: Enabling site 000-default. ==> default: * Starting web server apache2 ==> default: AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.0.2.15. Set the 'ServerName' directive globally to suppress this message ==> default: * ==> default: Setting up fonts-dejavu-extra (2.34-1ubuntu1) ... ==> default: Setting up fonts-dejavu (2.34-1ubuntu1) ... ==> default: Setting up liberror-perl (0.17-1.1) ... ==> default: Setting up git-man (1:1.9.1-1ubuntu0.3) ... ==> default: Setting up git (1:1.9.1-1ubuntu0.3) ... ==> default: Setting up libdbi1:amd64 (0.9.0-1) ... ==> default: Setting up librrd4 (1.4.7-2ubuntu5) ... ==> default: Setting up ssl-cert (1.0.33) ... ==> default: Setting up ttf-dejavu-core (2.34-1ubuntu1) ... ==> default: Setting up ttf-dejavu-extra (2.34-1ubuntu1) ... ==> default: Setting up ttf-dejavu (2.34-1ubuntu1) ... ==> default: Setting up rrdtool (1.4.7-2ubuntu5) ... ==> default: Setting up php5-common (5.5.9+dfsg-1ubuntu4.16) ... ==> default: Creating config file /etc/php5/mods-available/pdo.ini with new version ==> default: php5_invoke: Enable module pdo for apache2 SAPI ==> default: php5_invoke: Enable module pdo for cli SAPI ==> default: Creating config file /etc/php5/mods-available/opcache.ini with new version ==> default: php5_invoke: Enable module opcache for apache2 SAPI ==> default: php5_invoke: Enable module opcache for cli SAPI ==> default: Setting up php5-cli (5.5.9+dfsg-1ubuntu4.16) ... ==> default: update-alternatives: ==> default: using /usr/bin/php5 to provide /usr/bin/php (php) in auto mode ==> default: Creating config file /etc/php5/cli/php.ini with new version ==> default: php5_invoke opcache: already enabled for cli SAPI ==> default: php5_invoke pdo: already enabled for cli SAPI ==> default: Setting up php5-readline (5.5.9+dfsg-1ubuntu4.16) ... ==> default: Creating config file /etc/php5/mods-available/readline.ini with new version ==> default: php5_invoke: Enable module readline for apache2 SAPI ==> default: php5_invoke: Enable module readline for cli SAPI ==> default: Setting up php5-sqlite (5.5.9+dfsg-1ubuntu4.16) ... ==> default: Creating config file /etc/php5/mods-available/sqlite3.ini with new version ==> default: php5_invoke: Enable module sqlite3 for apache2 SAPI ==> default: php5_invoke: Enable module sqlite3 for cli SAPI ==> default: Creating config file /etc/php5/mods-available/pdo_sqlite.ini with new version ==> default: php5_invoke: Enable module pdo_sqlite for apache2 SAPI ==> default: php5_invoke: Enable module pdo_sqlite for cli SAPI ==> default: Setting up php-irods-prods (3.3.0~beta1-1) ... ==> default: Setting up php5-json (1.3.2-2build1) ... ==> default: php5_invoke: Enable module json for apache2 SAPI ==> default: php5_invoke: Enable module json for cli SAPI ==> default: Processing triggers for ureadahead (0.100.0-16) ... ==> default: Processing triggers for ufw (0.34~rc-0ubuntu2) ... ==> default: Setting up libapache2-mod-php5 (5.5.9+dfsg-1ubuntu4.16) ... ==> default: Creating config file /etc/php5/apache2/php.ini with new version ==> default: php5_invoke readline: already enabled for apache2 SAPI ==> default: php5_invoke json: already enabled for apache2 SAPI ==> default: php5_invoke sqlite3: already enabled for apache2 SAPI ==> default: php5_invoke opcache: already enabled for apache2 SAPI ==> default: php5_invoke pdo: already enabled for apache2 SAPI ==> default: php5_invoke pdo_sqlite: already enabled for apache2 SAPI ==> default: Module mpm_event disabled. ==> default: Enabling module mpm_prefork. ==> default: apache2_switch_mpm Switch to prefork ==> default: * Restarting web server apache2 ==> default: AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.0.2.15. Set the 'ServerName' directive globally to suppress this message ==> default: ...done. ==> default: apache2_invoke: Enable module php5 ==> default: * Restarting web server apache2 ==> default: AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 10.0.2.15. Set the 'ServerName' directive globally to suppress this message ==> default: ...done. ==> default: Setting up php5 (5.5.9+dfsg-1ubuntu4.16) ... ==> default: Processing triggers for libc-bin (2.19-0ubuntu6.7) ... ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: Reading state information... ==> default: The following packages will be upgraded: ==> default: dpkg ==> default: 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. ==> default: Need to get 1,956 kB of archives. ==> default: After this operation, 1,024 B of additional disk space will be used. ==> default: Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main dpkg amd64 1.17.5ubuntu5.6 [1,956 kB] ==> default: Fetched 1,956 kB in 3s (556 kB/s) ==> default: (Reading database ... 64712 files and directories currently installed.) ==> default: Preparing to unpack .../dpkg_1.17.5ubuntu5.6_amd64.deb ... ==> default: Unpacking dpkg (1.17.5ubuntu5.6) over (1.17.5ubuntu5.5) ... ==> default: Processing triggers for man-db (2.6.7.1-1ubuntu1) ... ==> default: Setting up dpkg (1.17.5ubuntu5.6) ... ==> default: Selecting previously unselected package irods-icommands. ==> default: (Reading database ... 64712 files and directories currently installed.) ==> default: Preparing to unpack irods-icommands-4.1.8-ubuntu14-x86_64.deb ... ==> default: Unpacking irods-icommands (4.1.8) ... ==> default: Setting up irods-icommands (4.1.8) ... ==> default: ########################################################### ==> default: # ==> default: # The iCommands have been installed into your path. ==> default: # ==> default: # They require your environment to be configured ==> default: # for communication with an iRODS server. ==> default: # ==> default: # Place the following configuration information into ==> default: # your irods_environment.json file and edit as appropriate: ==> default: # ==> default: # ~/.irods/irods_environment.json ==> default: # ==> default: ########################################################### ==> default: ==> default: { ==> default: "irods_host": "FULLY.QUALIFIED.DOMAIN.NAME", ==> default: "irods_port": 1247, ==> default: "irods_default_resource": "demoResc", ==> default: "irods_home": "/tempZone/home/USERNAME", ==> default: "irods_cwd": "/tempZone/home/USERNAME", ==> default: "irods_user_name": "USERNAME", ==> default: "irods_zone_name": "tempZone", ==> default: "irods_client_server_negotiation": "request_server_negotiation", ==> default: "irods_client_server_policy": "CS_NEG_REFUSE", ==> default: "irods_encryption_key_size": 32, ==> default: "irods_encryption_salt_size": 8, ==> default: "irods_encryption_num_hash_rounds": 16, ==> default: "irods_encryption_algorithm": "AES-256-CBC", ==> default: "irods_default_hash_scheme": "SHA256", ==> default: "irods_match_hash_policy": "compatible" ==> default: } ==> default: Processing triggers for man-db (2.6.7.1-1ubuntu1) ... }}} Once the setup is complete, your Archive Viewer is ready and running. You can familiarize yourself with some of vagrant commands We have setup a webserver on this virtual machine that can be accessed by your local web browser by going to either http://localhost:8888/ OR http://192.168.33.22/ You will then be required to enter your GENI Irods username and password. Once logged in, a list of all the archives created using the GENIDesktop archive module are listed . You may choose to download any to your local VM and view them. You can choose to 1. Re-download any of these remote archives 2. Delete any of these remote archives 3. Delete any of the already downloaded (local copy) archive points. You may need to do this in case you run out of disk space on your Archive Viewer VM. == 2222 (host) 80 (guest) => 8888 (host) }}} 3. To stop or shutdown the VM {{{ vagrant halt ==> default: Attempting graceful shutdown of VM... }}} 4. To delete the VM {{{ vagrant destroy default: Are you sure you want to destroy the 'default' VM? [y/N] y ==> default: Destroying VM and associated drives... }}} 5. Other commands , use the help option using the command {{{ vagrant -h Usage: vagrant [options] [] -v, --version Print the version and exit. -h, --help Print this help. Common commands: box manages boxes: installation, removal, etc. destroy stops and deletes all traces of the vagrant machine global-status outputs status Vagrant environments for this user halt stops the vagrant machine help shows the help for a subcommand init initializes a new Vagrant environment by creating a Vagrantfile login log in to HashiCorp's Atlas package packages a running vagrant environment into a box plugin manages plugins: install, uninstall, update, etc. port displays information about guest port mappings powershell connects to machine via powershell remoting provision provisions the vagrant machine push deploys code in this environment to a configured destination rdp connects to machine via RDP reload restarts vagrant machine, loads new Vagrantfile configuration resume resume a suspended vagrant machine snapshot manages snapshots: saving, restoring, etc. ssh connects to machine via SSH ssh-config outputs OpenSSH valid configuration to connect to the machine status outputs status of the vagrant machine suspend suspends the machine up starts and provisions the vagrant environment version prints current and latest Vagrant version }}}