'''''Draft Instructions'''''
= Installing Fedora 8 for MyPLC =
== System Configuration ==
=== SELinux ===
You probably need to disable {{{SELinux}}} in order to get MyPLC working. If you go through a wizard during install that asks about {{{SELinux}}}, set it to {{{disabled}}}. If not, edit {{{/etc/selinux/config}}} (as root) to set {{{SELINUX=disabled}}}.
=== Firewall ===
For development on the internal network, you may want to simply disable the firewall altogether. Otherwise you'll need to open a few ports. You'll need to allow ssh (port 22), and you'll also probably need to allow access via ports 12345, 12346, and 12347 to access SFA.
== Networking ==
If you have trouble with networking, like the network not starting until a user logs in, you need to disable {{{NetworkManager}}} and enable {{{network}}}. The following commands (executed as root or via sudo) will disable !NetworkManager and enable the traditional network startup.
{{{
/sbin/chkconfig NetworkManager off
/sbin/chkconfig network reset
}}}
Finally, enable ssh to allow remote access to the machine:
{{{
/sbin/chkconfig sshd reset
}}}