'''Phase 1 Testing'''
  * Boot in L2/L3 Mode (Complete)
  * Basic configuration template (Complete)
    * Username/Password
    * SNMP
    * TACACS
      * Unable to login with "backdoor" username/password if TACACS is enabled.  Until this is addressed, TACACS isn't an option
      * Unable to configure remote port. Pica8 is aware and will address in future revision.
    * SSH Enabled / Telnet Disabled
    * Syslogging
  * Basic Openflow configuration testing (Complete)
    * Enable Openflow globally
    * Connect to Flowvisor
    * Verify resource advertisement remotely

[[BR]]

'''Phase 2 Testing'''

  * Layer1Transport testing
    * layer1transport configured on NLR FOAM with test rules
    * Configure switch with connection toward layer1transport service
    * Generate traffic from BSSW test host
    * Verify basic traffic connectivity
    * Performance testing?

[[BR]]


'''Phase 3 Testing'''

  * BSSW to develop "newer" version of OVS software
    * SNMP/TACACS enabled
    * CLI similar to L2/L3 Mode
  * Future testing?

[[BR]]


'''Houston Switch Deployment'''

  * Mount/Power
  * Connect to NLR Out-of-Band
  * Connect to NLR FrameNet for In-Band Management / Control-Plane Traffic
  * Verify basic IP Connectivity
  * Establish connection to Layer1Transport on NLR FOAM
  * Break existing SUNN to ATLA GENI backbone and insert new switch into path
    * Port 48 --> Atlanta
    * Port 47 --> Sunnyvale (Soon to be El Paso)
    * Port 46 --> Kansas City (New Connection)
  * Verify GENI backbone connectivity


[[BR]]


'''El Paso Switch Deployment'''

  * Mount/Power
  * Connect to NLR Out-of-Band
  * Connect to NLR FrameNet for In-Band Management / Control-Plane Traffic
  * Verify basic IP Connectivity
  * Establish connection to Layer1Transport on NLR FOAM
  * Break existing SUNN to HOUS to ATLA GENI backbone and insert new switch into path
    * Port 48 --> Houston
    * Port 47 --> Sunnyvale
    * Port 46 --> Denver (Disabled at this moment)
  * Verify GENI backbone connectivity

[[BR]]


'''Kansas City Switch Deployment'''

  * Mount/Power
  * Connect to NLR Out-of-Band
  * Connect to NLR FrameNet for In-Band Management / Control-Plane Traffic
  * Verify basic IP Connectivity
  * Establish connection to Layer1Transport on NLR FOAM
  * Break existing SEAT to DENV backbone and insert new switch into path
    * Port 48 --> Chicago
    * Port 47 --> Seattle
    * Port 46 --> El Paso (Disabled at this moment)
  * Verify GENI backbone connectivity


[[BR]]


'''Denver HP Switch Maintenance'''

  * Connect 10GE Port (28) toward El Paso


[[BR]]


Remove