Version 1 (modified by 10 years ago) (diff) | ,
---|
Phase 1 Testing
- Boot in L2/L3 Mode (Complete)
- Basic configuration template (Complete)
- Username/Password
- SNMP
- TACACS
- Unable to login with "backdoor" username/password if TACACS is enabled. Until this is addressed, TACACS isn't an option
- Unable to configure remote port. Pica8 is aware and will address in future revision.
- SSH Enabled / Telnet Disabled
- Syslogging
- Basic Openflow configuration testing (Complete)
- Enable Openflow globally
- Connect to Flowvisor
- Verify resource advertisement remotely
Phase 2 Testing
- Layer1Transport testing
- layer1transport configured on NLR FOAM with test rules
- Configure switch with connection toward layer1transport service
- Generate traffic from BSSW test host
- Verify basic traffic connectivity
- Performance testing?
Phase 3 Testing
- BSSW to develop "newer" version of OVS software
- SNMP/TACACS enabled
- CLI similar to L2/L3 Mode
- Future testing?
Houston Switch Deployment
- Mount/Power
- Connect to NLR Out-of-Band
- Connect to NLR FrameNet for In-Band Management / Control-Plane Traffic
- Verify basic IP Connectivity
- Establish connection to Layer1Transport on NLR FOAM
- Break existing SUNN to ATLA GENI backbone and insert new switch into path
- Port 48 --> Atlanta
- Port 47 --> Sunnyvale (Soon to be El Paso)
- Port 46 --> Kansas City (New Connection)
- Verify GENI backbone connectivity
El Paso Switch Deployment
- Mount/Power
- Connect to NLR Out-of-Band
- Connect to NLR FrameNet for In-Band Management / Control-Plane Traffic
- Verify basic IP Connectivity
- Establish connection to Layer1Transport on NLR FOAM
- Break existing SUNN to HOUS to ATLA GENI backbone and insert new switch into path
- Port 48 --> Houston
- Port 47 --> Sunnyvale
- Port 46 --> Denver (Disabled at this moment)
- Verify GENI backbone connectivity
Kansas City Switch Deployment
- Mount/Power
- Connect to NLR Out-of-Band
- Connect to NLR FrameNet for In-Band Management / Control-Plane Traffic
- Verify basic IP Connectivity
- Establish connection to Layer1Transport on NLR FOAM
- Break existing SEAT to DENV backbone and insert new switch into path
- Port 48 --> Chicago
- Port 47 --> Seattle
- Port 46 --> El Paso (Disabled at this moment)
- Verify GENI backbone connectivity
Denver HP Switch Maintenance
- Connect 10GE Port (28) toward El Paso
Remove
Attachments (4)
-
NLR Proposed GENI Backbone.pdf (9.9 KB) - added by 10 years ago.
Version 1.0 of New NLR GENI Backbone
-
NLR-topo.pdf (45.4 KB) - added by 10 years ago.
Pica8 / BSSW Testing Topology
- NLR Proposed GENI Backbone.png (268.3 KB) - added by 10 years ago.
- NLR-topo.png (102.1 KB) - added by 10 years ago.
Download all attachments as: .zip