| 1 | '''Phase 1 Testing''' |
| 2 | * Boot in L2/L3 Mode (Complete) |
| 3 | * Basic configuration template (Complete) |
| 4 | * Username/Password |
| 5 | * SNMP |
| 6 | * TACACS |
| 7 | * Unable to login with "backdoor" username/password if TACACS is enabled. Until this is addressed, TACACS isn't an option |
| 8 | * Unable to configure remote port. Pica8 is aware and will address in future revision. |
| 9 | * SSH Enabled / Telnet Disabled |
| 10 | * Syslogging |
| 11 | * Basic Openflow configuration testing (Complete) |
| 12 | * Enable Openflow globally |
| 13 | * Connect to Flowvisor |
| 14 | * Verify resource advertisement remotely |
| 15 | |
| 16 | [[BR]] |
| 17 | |
| 18 | '''Phase 2 Testing''' |
| 19 | |
| 20 | * Layer1Transport testing |
| 21 | * layer1transport configured on NLR FOAM with test rules |
| 22 | * Configure switch with connection toward layer1transport service |
| 23 | * Generate traffic from BSSW test host |
| 24 | * Verify basic traffic connectivity |
| 25 | * Performance testing? |
| 26 | |
| 27 | [[BR]] |
| 28 | |
| 29 | |
| 30 | '''Phase 3 Testing''' |
| 31 | |
| 32 | * BSSW to develop "newer" version of OVS software |
| 33 | * SNMP/TACACS enabled |
| 34 | * CLI similar to L2/L3 Mode |
| 35 | * Future testing? |
| 36 | |
| 37 | [[BR]] |
| 38 | |
| 39 | |
| 40 | '''Houston Switch Deployment''' |
| 41 | |
| 42 | * Mount/Power |
| 43 | * Connect to NLR Out-of-Band |
| 44 | * Connect to NLR FrameNet for In-Band Management / Control-Plane Traffic |
| 45 | * Verify basic IP Connectivity |
| 46 | * Establish connection to Layer1Transport on NLR FOAM |
| 47 | * Break existing SUNN to ATLA GENI backbone and insert new switch into path |
| 48 | * Port 48 --> Atlanta |
| 49 | * Port 47 --> Sunnyvale (Soon to be El Paso) |
| 50 | * Port 46 --> Kansas City (New Connection) |
| 51 | * Verify GENI backbone connectivity |
| 52 | |
| 53 | |
| 54 | [[BR]] |
| 55 | |
| 56 | |
| 57 | '''El Paso Switch Deployment''' |
| 58 | |
| 59 | * Mount/Power |
| 60 | * Connect to NLR Out-of-Band |
| 61 | * Connect to NLR FrameNet for In-Band Management / Control-Plane Traffic |
| 62 | * Verify basic IP Connectivity |
| 63 | * Establish connection to Layer1Transport on NLR FOAM |
| 64 | * Break existing SUNN to HOUS to ATLA GENI backbone and insert new switch into path |
| 65 | * Port 48 --> Houston |
| 66 | * Port 47 --> Sunnyvale |
| 67 | * Port 46 --> Denver (Disabled at this moment) |
| 68 | * Verify GENI backbone connectivity |
| 69 | |
| 70 | [[BR]] |
| 71 | |
| 72 | |
| 73 | '''Kansas City Switch Deployment''' |
| 74 | |
| 75 | * Mount/Power |
| 76 | * Connect to NLR Out-of-Band |
| 77 | * Connect to NLR FrameNet for In-Band Management / Control-Plane Traffic |
| 78 | * Verify basic IP Connectivity |
| 79 | * Establish connection to Layer1Transport on NLR FOAM |
| 80 | * Break existing SEAT to DENV backbone and insert new switch into path |
| 81 | * Port 48 --> Chicago |
| 82 | * Port 47 --> Seattle |
| 83 | * Port 46 --> El Paso (Disabled at this moment) |
| 84 | * Verify GENI backbone connectivity |
| 85 | |
| 86 | |
| 87 | [[BR]] |
| 88 | |
| 89 | |
| 90 | '''Denver HP Switch Maintenance''' |
| 91 | |
| 92 | * Connect 10GE Port (28) toward El Paso |
| 93 | |
| 94 | |
| 95 | [[BR]] |
| 96 | |
| 97 | |
| 98 | Remove |