= InstaGENI Aggregate = '''University of Missouri-Columbia''' This InstaGENI aggregate supports the GENI Aggregate Provider Agreement (10/09/2013). Recording agreement date based on an email correspondence with site contact. = InstaGENI Aggregate Overview = || Aggregate Manager URL || https://instageni.rnet.missouri.edu:12369/protogeni/xmlrpc/am || || Aggregate Manager URN || urn:publicid:IDN+instageni.rnet.missouri.edu+authority+cm || || Aggregate Manager Common Name || missouri-ig || || Aggregate Resources || An InstaGENI aggregate includes 5 Hosts (3 VM Servers and 2 dedicated PCs) that can load experimenter specified OS images. Racks also support !OpenFlow topologies, usually including extensions onto campus !OpenFlow networks. Rack servers are HP !ProLiant DL380p Gen8. || || Typical Experiments || InstaGENI provides a controllable, predictable, and repeatable network environment. Experimenters can get virtual machines or dedicated PCs on which they have full "root" access, run available operating systems of their choice, and connect nodes in an arbitrary topology that can support !OpenFlow. || || Sample RSpecs ||[http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/MissouriColumbia Site Confirmation RSpecs] [http://groups.geni.net/geni/browser/trunk/stitch-examples/Missouri Stitching RSpecs]|| || Aggregate Status || Restricted access to monitoring at [http://genimon.uky.edu] and [https://gmoc-db.grnoc.iu.edu/protected-openid/index.pl GMOC]|| || Slice Authorities Recognized ||GENI Portal (https://portal.geni.net), ProtoGENI (http://www.emulab.net) || || Usage Policies || A [http://groups.geni.net/geni/attachment/wiki/RUP/RUP.pdf GENI Recommended Use Policy] is available. Site should also add links here to their own usage policies. || || Layer 2 Connectivity || Internet2 || [[BR]] = Aggregate Management = || Aggregate Operator || Gordon K. Springer [mailto:springer@cs.missouri.edu], [http://missouri.edu/ University of Missouri, Columbia] || || Resource Owner || Gordon K. Springer || || Technical POC || [mailto:instageni-ops@flux.utah.edu] || || Developer Links || Software pages: [https://wiki.emulab.net/Emulab/wiki/GitRepository InstaGENI], Project page: [http://groups.geni.net/geni/wiki/GENIRacksHome/InstageniRacks InstaGENI Racks Project]; Developer mailing list: [mailto:instageni-design@geni.net] || [[BR]] = GENI Network Stitching = ||'''VLANs Range'''|| ''' Link ID URN''' || '''Destination Network ''' || || 1150-1165 ||urn:publicid:IDN+instageni.rnet.missouri.edu+interface+procurve2:1.19.al2s|| urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.colu4.net.internet2.edu:eth1/2:missouri-ig || [[BR]] = !OpenFlow over GENI Network Stitching = This rack supports running hardware !OpenFlow experiments over stitched GENI network connections. Please be advised that the following restrictions apply: - Network stitching on the InstaGENI rack allocates and enforces link bandwidth, which cannot be modified by !OpenFlow. - VLANs allocated to stitched connections on the rack cannot be modified, because InstaGENI rack switches operate in hybrid mode, preventing VLAN tag rewriting. The following is the layout of !OpenFlow switch connections for the InstaGENI Aggregate. Shown are the !OpenFlow Switches: - __InstaGENI Switch procurve2__: Model: HP J8697A Switch E5406zl [[Image(UMCOpenFlow.jpg)]] [[BR]] = Port List = '''InstaGENI Rack OF Switch''' ||'''Name'''||'''Number'''||'''Connects To'''|| || E1 || 1 || pc1[eth1] || || E2 || 2 || pc1[eth2] || || E3 || 3 || pc1[eth3] || || E4 || 4 || pc2[eth1] || || E5 || 5 || pc2[eth2] || || E6 || 6 || pc2[eth3] || || E7 || 7 || pc3[eth1] || || E8 || 8 || pc3[eth2] || || E9 || 9 || pc3[eth3] || || E10 || 10 || pc4[eth1] || || E11 || 11 || pc4[eth2] || || E12 || 12 || pc4[eth3] || || E13 || 13 || pc5[eth1] || || E14 || 14 || pc5[eth2] || || E15 || 15 || pc5[eth3] || || E19 || 19 || to GENI network || If you require some other type of dataplane connections for your !OpenFlow experiment, please contact [mailto:geni-users@googlegroups.com].