= US Ignite InstaGENI Aggregate = '''University of Louisiana at Lafayette''' This US Ignite InstaGENI aggregate supports the GENI Aggregate Provider Agreement (05/09/2017). = InstaGENI Aggregate Overview = || Aggregate Manager URL || https://instageni.louisiana.edu:12369/protogeni/xmlrpc/am || || Aggregate Manager URN || urn:publicid:IDN+instageni.louisiana.edu+authority+cm || || Aggregate Manager Common Name || ullafayette-ig|| || Aggregate Resources || An US Ignite InstaGENI aggregate includes 5 Hosts (3 VM Servers and 2 dedicated PCs) that can load experimenter specified OS images. Racks also support !OpenFlow 1.3 topologies, usually including extensions onto campus !OpenFlow networks. Rack servers are HP !ProLiant DL380p Gen9.|| || Typical Experiments || InstaGENI provides a controllable, predictable, and repeatable network environment. Experimenters can get virtual machines or dedicated PCs on which they have full "root" access, run available operating systems of their choice, and connect nodes in an arbitrary topology that can support !OpenFlow 1.3. || || Sample RSpecs || [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/ULLafayette Site Confirmation RSpecs] and [http://groups.geni.net/geni/browser/trunk/stitch-examples/ULLafayette Stitching RSpecs] || || Aggregate Status || Select "ullafayette-ig" at [https://genimon.uky.edu/status] or login for [https://genimon.uky.edu/login Operator status and reports]|| || Slice Authorities Recognized ||GENI Portal (https://portal.geni.net), ProtoGENI (http://www.emulab.net) || || Usage Policies || A [http://groups.geni.net/geni/attachment/wiki/RUP/RUP.pdf GENI Recommended Use Policy] is available. Site should also add links here to their own usage policies. || || Layer 2 Connectivity || UL Lafayette connects at 10Gbps to AL2S via the UL Lafayette Science DMZ and LONI regional network at the Internet2 BATO node.|| [[BR]] = Aggregate Management = || Aggregate Operator || Jeremy Schambaugh jeremy.schambaugh@louisiana.edu || || Resource Owner || Matthew E Delcambre matt.delcambre@louisiana.edu|| || Technical POC || [mailto:instageni-ops@flux.utah.edu] || || Developer Links || [https://wiki.emulab.net/Emulab/wiki/GitRepository InstaGENI], US Ignite Project page: [http://groups.geni.net/geni/wiki/GENIRacksHome/USIgniteInstageniRacks InstaGENI Racks Project]; Developer mailing list: [mailto:instageni-design@geni.net] || [[BR]] = GENI Network Stitching = ||'''VLANs Range''' || ''' Link ID URN''' || '''Next Hop''' || || 3980-3999||urn:publicid:IDN+instageni.louisiana.edu+interface+procurve2:1.21.al2s || urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.bato.net.internet2.edu:et-8/0/0.0:ullafayette-ig || [[BR]] = !OpenFlow over GENI Network Stitching = This rack supports running hardware !OpenFlow experiments over stitched GENI network connections. Please be advised that the following restrictions apply: - Network stitching on the InstaGENI rack allocates and enforces link bandwidth, which cannot be modified by !OpenFlow. - VLANs allocated to stitched connections on the rack cannot be modified, because InstaGENI rack switches operate in hybrid mode, preventing VLAN tag rewriting. This rack supports !OpenFlow 1.3 protocol experiments. The following is the layout of !OpenFlow switch connections for the InstaGENI Aggregate. Shown are the !OpenFlow Switches: - __InstaGENI Switch procurve2__: Model: HP J9850A Switch 5406Rzl2 [[Image(ULLafayette-InstaGENI-detail.jpg)]] [[BR]] = Port List = '''InstaGENI Rack OF Switch''' ||'''Name'''||'''Number'''||'''Connects To'''|| || E1 || 1 || pc1[eth1] || || E2 || 2 || pc1[eth2] || || E3 || 3 || pc1[eth3] || || E4 || 4 || pc2[eth1] || || E5 || 5 || pc2[eth2] || || E6 || 6 || pc2[eth3] || || E7 || 7 || pc3[eth1] || || E8 || 8 || pc3[eth2] || || E9 || 9 || pc3[eth3] || || E10 || 10 || pc4[eth1] || || E11 || 11 || pc4[eth2] || || E12 || 12 || pc4[eth3] || || E13 || 13 || pc5[eth1] || || E14 || 14 || pc5[eth2] || || E15 || 15 || pc5[eth3] || || E21 || 21 || to Internet2 Baton Rouge || !OpenFlow connection to the GENI core network is via '' '''port name="E21" num="21" ''' '' on the ''procurve2'' switch. Shared Nodes interfaces (port name/port number) details: ||'''Host'''||'''eth1'''||'''eth2'''||'''eth3'''|| || pc1 || E1/1 || E2/2 || E3/3 || || pc2 || E4/4 || E5/5 || E6/6 || || pc3 || E7/7 || E8/8 || E9/9 || Dedicated Nodes interfaces (port name/port number) details: ||'''Host'''||'''eth1'''||'''eth2'''||''' eth3'''|| || pc4 || E10/10 || E11/11 || E12/12 || || pc5 || E13/13 || E14/14 || E15/15 || If you require some other type of dataplane connections for your !OpenFlow experiment, please contact [mailto:geni-users@googlegroups.com].