| 469 | | After selecting an NTP server, selected Bandwitdth and Latency services for node1 and node2: |
| 470 | | |
| 471 | | [[Image(Lamp-portal-5.jpg)]] |
| 472 | | |
| 473 | | ''' 7. You can now enable/disable services on each node'''. Following instructions in the tutorial enabled the following services on each node: |
| 474 | | |
| 475 | | * node1: Host Monitoring Daemon, Latency services, BWCTL, and the NTP server. |
| 476 | | |
| 477 | | * node2: Host Monitoring Daemon, Bandwidth services, OWAMP, and the NTP server. |
| 478 | | |
| 479 | | * lamp: LAMP Portal, Host Monitoring Collector, the Ganglia Measurement Archive, and NTP server. |
| 480 | | |
| 481 | | Once the services are enables switched to "Configuration Status" page to "Push Configuration to UNISIS" |
| | 469 | Selected an NTP server and saved changes. |
| | 470 | |
| | 471 | |
| | 472 | ''' 7. You can now enable/disable services on each node'''. Following instructions in the tutorial enabled the following services were enabled on each node: |
| | 473 | |
| | 474 | * node1: Host Monitoring Daemon, Latency services, BWCTL, and the NTP server. [[BR]] |
| | 475 | * node2: Host Monitoring Daemon, Bandwidth services, OWAMP, and the NTP server. [[BR]] |
| | 476 | * lamp: LAMP Portal, Host Monitoring Collector, the Ganglia Measurement Archive, and NTP server. [[BR]] |
| | 477 | |
| | 478 | Once the services are enables switched to "Configuration Status" page to "Push Configuration" to the UNIS server. |
