== GPO GEC8 Demonstrations ==

The [http://www.openflowswitch.org/wk/index.php/GEC8_Demo GEC8 Demonstrations] using Open Flow included a [http://groups.geni.net/syseng/wiki/SmartReGec8 SmartRe demo] and a [http://groups.geni.net/syseng/wiki/PathletRoutingGec Pathlet Routing demo].  

Following are diagrams capturing the software and the system (in parenthesis) used for each of the demos:

[[Image(pathlet-demo-GEC8.jpg)]]

[[Image(smartre-demo-GEC8.jpg)]]

Following is a list of software and version used for these demos. Also listed are the contributors that provided details captured:

 * [http://groups.geni.net/syseng/wiki/OpenFlow OpenFlow]-capable HP !ProCurve 6600-48G-4Xg switch with HP firmware version 2.02e.  Run on switch habanero. 
 * [http://groups.geni.net/syseng/wiki/OpenFlow OpenFlow]-capable NEC S3640 switch with NEC firmware rev278.  Run on switch cayenne. 
 * [http://groups.geni.net/syseng/wiki/FlowVisor FlowVisor] version 0.6.alpha16 on ASRock ION Nettop. Run on troy an Ubuntu Karmic VM. 
    ''=> Information provided by Josh Smift (jbs@bbn.com).''

 * SmartRE controller from [http://groups.geni.net/syseng/wiki/SmartRe smartre] module tagged nox_bbn_ctrl-release-gec8. Run on nineveh an Ubuntu Karmic VM.
 * [http://groups.geni.net/syseng/wiki/BcastControllerGec Broadcast controller] from bcasttraffic module tagged nox_bbn_ctrl-release-gec8, SVN [http://groups.geni.net/syseng/browser/tags/nox_bbn_ctrl-release-gec8/src/nox/coreapps/bbntests/bcasttraffic.py location]. Run on port 50804 on nineveh an Ubuntu Karmic VM.
 * [http://groups.geni.net/syseng/wiki/gec8_bbn_monitor_module BBN monitor NOX module] module tagged nox_bbn_ctrl-release-gec8 with a pre-requisite of NOX-0.89, running on on nineveh an Ubuntu Karmic VM.
 * Click software version 1.6  and SmartRE Click module available as [http://groups.geni.net/syseng/wiki/SmartReGec8 attachments] on the !SmartRe page. Run on eisande and euskerria, both Ubuntu Karmic VMs. 

   ''=> Information provided by Niky Riga (nriga@bbn.com).''

 * Apache server httpd-2.0.63 running on port 9080. Run on sparrow.cs.wisc.edu a Linux 2.6.18-194.3.1.el5PAE system.

  ''=> Information provided by Niky Riga (nriga@bbn.com).''

 * The Aster*x controller at Stanford. Based on NOX0.4, the tag used was GEC8.
 * The Aster*x software on ganel, gardil, and sardis, all 3 are Fedora 8 systems. Tag GEC8.

  ''=> Information provided by Srini Seethataman (seethara@stanford.edu)''

 * [http://yuba.stanford.edu/~jnaous/expedient/ Expedient] Control Framework software was run on the uruk VMs. [http://yuba.stanford.edu/~jnaous/expedient/docs/ Documentation] is available including: a tutorial for users, an API document for developers and an installation guide for administrators.

  ''=> Status: Information request to Rob Sherwood (rob.sherwood@stanford.edu) and Jad Naous (jnaous@stanford.edu). Jad Naous believes that commit c80e397f6d18e4cbf75251f81c1aad24d8228ee1 was used, unable to verify, VM no longer available.''

 * MyPLC (myplc-5.0-4.planetlab) on miletus a Fedora 8 VM.

MyPLC configuration (plc-config-tty) used: 
{{{
== PLC_NAME : [myplc4.gpolab.bbn.com]
== PLC_SHORTNAME : [myplc4]
== PLC_SLICE_PREFIX : [gpo4]
== PLC_ROOT_USER : [root@localhost.localdomain]
== PLC_ROOT_PASSWORD : [not shown here]
== PLC_MAIL_ENABLED : [true]
== PLC_MAIL_SUPPORT_ADDRESS : [plc-admin@myplc4.gpolab.bbn.com]
== PLC_DB_HOST : [192.1.249.144]
== PLC_API_HOST : [192.1.249.144]
== PLC_WWW_HOST : [192.1.249.144]
== PLC_BOOT_HOST : [192.1.249.144]
== PLC_NET_DNS1 : [192.1.249.10]
== PLC_NET_DNS2 : [None] 
}}}
Images included planetlab-f8-i386-5.0-rc10 and util-vserver-pl-0.3-17 for all the myplc VM's.

   ''=> Information provided by Manu and Chaos''

 * SFA from http://svn.planet-lab.org/svn/sfa/trunk Revision 18512 on miletus a Fedora 8 VM.  

SFA Configuration (sfa-config-tty) used:
{{{
   == SFA_INTERFACE_HRN : [plc.gpo4]
   == SFA_REGISTRY_ROOT_AUTH : [plc]
   == SFA_REGISTRY_HOST : [myplc4.gpolab.bbn.com]
   == SFA_AGGREGATE_HOST : [myplc4.gpolab.bbn.com]
   == SFA_SM_HOST : [myplc4.gpolab.bbn.com]
   == SFA_PLC_USER : [root@localhost.localdomain]
   == SFA_PLC_PASSWORD : [h!K#71#s]
   == SFA_PLC_DB_HOST : [myplc4.gpolab.bbn.com]
   == SFA_PLC_DB_USER : [pgsqluser]
   == SFA_PLC_DB_PASSWORD : [3a6eff04-195d-4a74-9cd4-6d7df978c306]
   == SFA_PLC_URL : [https://localhost:443/PLCAPI/] 
}}}
Configuration in .sfi/sfi_config:
{{{
   SFI_AUTH="plc.gpo4.gpolab14"
   SFI_USER="plc.gpo4.gpolab14.jkarlin"
   SFI_REGISTRY="http://localhost:12345"
   SFI_SM="http://localhost:12347"
   SFI_GENI_AM="http://localhost:12348" 
}}}
  ''=> Information provided by Josh Karlin''

 * Visualization software on ganel based on Silverlight is being checked in, waiting on SVN location. Ganel is a Fedora 8 system. Unable to capture the myql definition used at the time of the demo. The visualization software is available in [http://groups.geni.net/svn/syseng/trunk/gposw/silverlight_visualizer SVN] revision 363.


  ''=> Information provided by Mark Berman (mberman@bbn.com) ''

== Additional Demo Information == 

Ticket [http://groups.geni.net/syseng/ticket/999 999] "document planetlab/myplc configuration used for Aster*x and Expedient demos" 
captures details relating to the GEC8 Demos.

Ticket [http://groups.geni.net/syseng/ticket/1012 1012] "Layer 2 Aster*x demo"

This [http://groups.geni.net/syseng/wiki/OpsPlanetlabAsterix Aster*x] page captures how to configure PlanetLab nodes in the Aster*x demo.