Version 60 (modified by 12 years ago) (diff) | ,
---|
GIMI Tutorial v1.1: Video Streaming Analysis on ExoGENI
1. Goals
The objective of this tutorial is to introduce the GIMI tool set to experimenters who are interested in performing experiments on ExoGENI slices. We will introduce an experiment workflow which experimenters will most likely apply to perform measurements.
After the tutorial, experimenters should be able to perform their own experiments.
2. Configuration
3. Workflow
In this part of the tutorial we give a brief overview on the experiment workflow.
GIMI is providing experimenters with a set of tools that will aid them in allocation GENI
resource (currently this is limited to ExoGENI resources), execute experiments, and perform
measurements while these experiments are running. In addition, the GIMI tools will allow
experimenters to analyze and visualize measurement data. Finally, a federated set of iRODS
servers provides an archival service.
The figure below illustrate what we describe as the experiment workflow.
During the tutorial we will walk through the single steps of this workflow with the goal to
have experimenters apply this workflow for their own experiments.
4.Topology
The image below illustrates the ExoGENI topology that we will create within the scope of this tutorial. The experiment described above will be executed on the basis of this topology. Note, that NodeC is running in a different physical location (BBN) than the other nodes (RENCI). In Section http://groups.geni.net/geni/wiki/GIMIv1.1Tutorial/Slice Obtain Slice, we will go through the process of setting up and obtaining a slice that represents this topology.
The routing in this topology is set up as follows:
Origin Node | Destination Net | Via IP | Node |
A | 192.168.1.0/24 | 192.168.4.10 | B |
192.168.2.0/24 | 192.168.4.10 | B | |
192.168.3.0/24 | 192.168.5.12 | C | |
192.168.4.0/24 | 192.168.4.11 | A | |
192.168.5.0/24 | 192.168.5.11 | A | |
192.168.6.0/24 | 192.168.5.12 | C |
B 192.168.1.0/24 192.168.1.10 B 192.168.2.0/24 192.168.2.10 B 192.168.3.0/24 192.168.1.13 D 192.168.4.0/24 192.168.4.10 B 192.168.5.0/24 192.168.4.11 A 192.168.6.0/24 192.168.2.12 C C 192.168.1.0/24 192.168.3.13 D 192.168.2.0/24 192.168.2.12 C 192.168.3.0/24 192.168.3.12 C 192.168.4.0/24 192.168.5.11 A 192.168.5.0/24 192.168.5.12 C 192.168.6.0/24 192.168.6.12 C
5. Help
In the following we list set of resources which experimenters can make use of to obtain further help if required:
- Mailing list for GIMI users: geni-gimi-users@googlegroups.com
- Mailing list for ExoGENI users: geni-orca-users@googlegroups.com
0) Overview of experiment
0.1) Title and abstract
0.2) Goals
0.3) Configuration
0.4 Process (flow chart)
http://groups.geni.net/geni/wiki/GIMIv1.1Tutorial/ Back to tutorial main page
Attachments (4)
-
GIMI_workflow.jpg (39.4 KB) - added by 12 years ago.
Workflow for GIMIv1.1. tutorial
-
topology.jpg (47.3 KB) - added by 12 years ago.
Experiment Topology
-
2201210012154478_GIMI_workflow.jpg (39.4 KB) - added by 12 years ago.
Workflo Map
- Configuration.png (86.1 KB) - added by 12 years ago.
Download all attachments as: .zip