Version 11 (modified by 12 years ago) (diff) | ,
---|
F. Analyze
In Section F we went through the exercise of retrieving data from iRODS to a local computer. In this Section, we will introduce two different methods that can be used to analyze the measurement data. Analysis of measurement data obtained with OMF/OML is not limited to these two methods, we simply use them for demonstration purposes.
G.1 R Scripts
One potential way to visualize the data is making use of R, which provides a visualization language. For this tutorial, we have create a set of R script, which we briefly discuss in the following.
The first script creates a plot of the RTTs for each ping that's carried out in the experiment. The following code snipped shows part of the R script that is used to plot a single ping (to 192.168.2.10).
library(RSQLite) con <- dbConnect(dbDriver("SQLite"), dbname = "gimi30-ping_all.sq3") dbListTables(con) dbReadTable(con,"pingmonitor_myping") mydata <- dbGetQuery(con, "select dest_addr,rtt from pingmonitor_myping where dest_addr='192.168.4.10'") rtt <- mydata$rtt pdf("gimi31_ping1.pdf") plot(rtt,type="o",col="red",xlab="Experiment Interval",ylab="RTT (ms)") title(main="Ping Experiment to IP address 192.168.4.10", col.main="blue", font.main=4)
library(RSQLite) con <- dbConnect(dbDriver("SQLite"), dbname = "gimi20-otg-nmetrics.sq3") dbListTables(con) dbReadTable(con,"otr2_udp_in") mydata <- dbGetQuery(con, "select pkt_length from otr2_udp_in where src_host='192.168.4.10'") pkt_length <- mydata$pkt_length/1024/1024*8 pdf("gimi31_otg1.pdf", height=5.5, width=7, pointsize=14) plot(pkt_length,type="o",col="red",xlab="Experiment Interval",ylab="Packet size") title(main="Received packet size with sender address 192.168.4.10", col.main="blue", font.main=4) dev.off()
G.2 omf_web
5) Analyze and visualize measurement results after completing run of experiment
- if necessary, retrieve measurement results from archive service
- analyze and format results as desired, for visualization with presentation service
- as appropriate, store analyzed results and/or visualization in storage service
http://groups.geni.net/geni/wiki/GIMIv1.1Tutorial/Toirods Back to previous step
http://groups.geni.net/geni/wiki/GIMIv1.1Tutorial/Fromirods Forward to next step
http://groups.geni.net/geni/wiki/GIMIv1.1Tutorial/ Back to tutorial main page
Attachments (4)
-
GIMI_workflow_F.jpg (39.3 KB) - added by 12 years ago.
Workflow F
- gimi20-nmetrics-eth.png (31.6 KB) - added by 12 years ago.
- gimi20_otg1.png (29.8 KB) - added by 12 years ago.
- gimi20-ping.png (42.9 KB) - added by 12 years ago.
Download all attachments as: .zip