Changes between Version 6 and Version 7 of GIMITestPlan


Ignore:
Timestamp:
05/14/12 17:13:05 (7 years ago)
Author:
Jeanne Ohren
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GIMITestPlan

    v6 v7  
    125125 * Verify required services have been enabled
    126126
    127 ===== GIM-1A-IS-X Test Basic Measurements =====
    128 
    129 This case tests basic measurement configuration on the measurement points.  ''' Need to be more specific here '''
    130 
    131 '''Prerequisites:'''
    132 
    133 An ExoGENI slice has been created and verified with 3 VMs using a static image with GIMI I&M packages installed.
    134 
    135 '''Procedure:'''
    136 
    137 Configure basic measurement services to run on the MPs using OMF EC and push results to the MC.
    138 Start, Stop, Restart basic measurement services using OMF EC.
    139 Verify that processes are being controlled correctly.
    140 Start basic measurement services.
    141 Verify that all tests/processes are executing successfully.
    142 Verify that expected data is collected on the MC
     127===== GIM-1A-IS-2 Basic Measurements =====
     128
     129This case tests basic measurement configuration on the measurement points.  ''' Need to be more specific here '''
     130
     131'''Prerequisites:'''
     132
     133 * An ExoGENI slice has been created and verified with 3 VMs using a static image with GIMI I&M packages installed.
     134
     135'''Procedure:'''
     136
     137 * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC.
     138 * Start, Stop, Restart basic measurement services using OMF EC.
     139 * Verify that processes are being controlled correctly.
     140 * Start basic measurement services.
     141 * Verify that all tests/processes are executing successfully.
     142 * Verify that expected data is collected on the MC
     143
     144===== GIM-1A-IS-3 Send Measurement Data to iRODS =====
     145
     146===== GIM-1A-IS-4 Visualize Results =====
     147
     148===== GIM-1A-IS-5 Send Analysis Data to iRODS =====
    143149
    144150==== Dynamic Install/Debian ====
    145151
    146 ===== GIM-1A-IS-X.  Slice/Sliver Setup =====
     152===== GIM-1A-IS-6.  Slice/Sliver Setup =====
    147153
    148154This test creates a slice on one ExoGENI aggregate with 3 VMs using a Debian image with GIMI I&M packages installed dynamically.
     
    163169 * Verify required services have been enabled
    164170
    165 ===== GIM-1A-IS-X Test Basic Measurements =====
    166 
    167 This case tests basic measurement configuration on the measurement points.  ''' Need to be more specific here '''
    168 
    169 '''Prerequisites:'''
    170 
    171 An ExoGENI slice has been created and verified with 3 VMs using a Fedora image with GIMI I&M packages installed.
    172 
    173 '''Procedure:'''
    174 
    175 Configure basic measurement services to run on the MPs using OMF EC and push results to the MC.
    176 Start, Stop, Restart basic measurement services using OMF EC.
    177 Verify that processes are being controlled correctly.
    178 Start basic measurement services.
    179 Verify that all tests/processes are executing successfully.
    180 Verify that expected data is collected on the MC
     171===== GIM-1A-IS-7 Basic Measurements =====
     172
     173This case tests basic measurement configuration on the measurement points.  ''' Need to be more specific here '''
     174
     175'''Prerequisites:'''
     176
     177 * An ExoGENI slice has been created and verified with 3 VMs using a Fedora image with GIMI I&M packages installed.
     178
     179'''Procedure:'''
     180
     181 * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC.
     182 * Start, Stop, Restart basic measurement services using OMF EC.
     183 * Verify that processes are being controlled correctly.
     184 * Start basic measurement services.
     185 * Verify that all tests/processes are executing successfully.
     186 * Verify that expected data is collected on the MC
     187
     188
     189===== GIM-1A-IS-8 Send Measurement Data to iRODS =====
     190
     191===== GIM-1A-IS-9 Visualize Results =====
     192
     193===== GIM-1A-IS-10 Send Analysis Data to iRODS =====
    181194
    182195=== One Aggregate, Common node outside the slice ===
     
    202215 * Verify required services have been enabled.
    203216
     217===== GIM-1A-OS-2 Basic Measurements =====
     218
     219This case tests basic measurement configuration on the measurement points.  ''' Need to be more specific here '''
     220
     221'''Prerequisites:'''
     222
     223 * An ExoGENI slice has been created and verified with 2 VMs using a static image with GIMI I&M packages installed.
     224 * The common (OML server) node is located on a node outside the slice and externally accessible.
     225 * The common node is accessible by the VMs within the slice (which ports?).
     226 * A messaging (XMPP) server is available and accessible by all nodes in the slice.  (Is this required for slice set-up?)
     227
     228'''Procedure:'''
     229
     230 * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC.
     231 * Start, Stop, Restart basic measurement services using OMF EC.
     232 * Verify that processes are being controlled correctly.
     233 * Start basic measurement services.
     234 * Verify that all tests/processes are executing successfully.
     235 * Verify that expected data is collected on the MC.
     236
     237===== GIM-1A-OS-3 Send Measurement Data to iRODS =====
     238
     239===== GIM-1A-OS-4 Visualize Results =====
     240
     241===== GIM-1A-OS-5 Send Analysis Data to iRODS =====
     242
    204243==== Dynamic Install/Debian ====
    205244
    206 ===== GIM-1A-OS-X.  Slice/Sliver Setup =====
     245===== GIM-1A-OS-6.  Slice/Sliver Setup =====
    207246
    208247This test creates a slice on one ExoGENI aggregate with 2 VMs using a Debian image with GIMI I&M packages installed dynamically.
     
    223262 * Verify full connectivity of the nodes within the slice (ping and ssh)  as well as connectivity to the common node outside the slice
    224263 * Verify required services have been enabled.
     264
     265===== GIM-1A-OS-7 Basic Measurements =====
     266
     267This case tests basic measurement configuration on the measurement points.  ''' Need to be more specific here '''
     268
     269'''Prerequisites:'''
     270
     271 * An ExoGENI slice has been created and verified with 2 VMs using a Debian image with GIMI I&M packages installed.
     272 * The common (OML server) node is located on a node outside the slice and externally accessible.
     273 * The common node is accessible by the VMs within the slice (which ports?).
     274 * A messaging (XMPP) server is available and accessible by all nodes in the slice.  (Is this required for slice set-up?)
     275
     276'''Procedure:'''
     277
     278 * Configure basic measurement services to run on the MPs using OMF EC and push results to the MC.
     279 * Start, Stop, Restart basic measurement services using OMF EC.
     280 * Verify that processes are being controlled correctly.
     281 * Start basic measurement services.
     282 * Verify that all tests/processes are executing successfully.
     283 * Verify that expected data is collected on the MC
     284
     285===== GIM-1A-OS-8 Send Measurement Data to iRODS =====
     286
     287===== GIM-1A-OS-9 Visualize Results =====
     288
     289===== GIM-1A-OS-10 Send Analysis Data to iRODS =====
     290