wiki:GIMI-GEC16-Tutorials/GIMI-GEC16-TutorialB/Orchestrate

Version 1 (modified by Cong, 11 years ago) (diff)

--

C. Orchestrate/Run Experiment

Image Map

C.1 Initial Setup

C.1.1 Starting the OML Server (if needed)

For this tutorial we have an OML server running on emmy9.casa.umass.edu, which collects the measurement data in an sqlite3 database and at the end of the experiment it pushes the data to IRODS.

  • Here is how you would have to start an OML server if you wanted to run this on a different machine (OML2.8 is required.) DO NOT perform this task in the tutorial.

This is explained the [OML installation file].

$ /usr/bin/oml2-server -l 3003 --logfile=/var/log/oml2-server-2.9.log --user=oml2 --group=oml2 -H /usr/share/oml2-server/oml2-server-hook.sh

The latest version of OML offers the capability of executing a script after the measurement has finished. In OML terminology this is called a "hook". The hook script we use is attached at the bottom of this wiki page (oml2-server-hook.sh).

List and explain final hook script here!

At the following page we give the interested experimenter additional information on how they can run their own OML server independent of the one offered by GIMI.


C.1.2 Verification of Topology

After establishing the slice on which the experiment will be executed, the experimenter will be most likely be interested in verifying if the slice has been initiated correctly. In this tutorial, we use an http://emmy9.casa.umass.edu/GEC15-GIMI-Tutorial/step1-ping_all.rb OMF experiment script that executes pings between neighboring nodes.
The following figure shows that a total of 12 (between each pair of nodes and in each direction) ping are performed.

defProperty('source1', "nodeA", "ID of a resource")
defProperty('source2', "nodeB", "ID of a resource")
defProperty('source3', "nodeC", "ID of a resource")
defProperty('source4', "nodeD", "ID of a resource")
defProperty('source5', "nodeE", "ID of a resource")

#defProperty('sink1', "nodeA", "ID of a sink")
#defProperty('sink2', "nodeB", "ID of a sink")
#defProperty('sink3', "nodeC", "ID of a sink")
#defProperty('sink4', "nodeD", "ID of a sink")
#defProperty('sink5', "nodeE", "ID of a sink")

defProperty('sinkaddr11', '192.168.4.10', "Ping destination address")
defProperty('sinkaddr12', '192.168.5.12', "Ping destination address")

defProperty('sinkaddr21', '192.168.4.11', "Ping destination address")
defProperty('sinkaddr22', '192.168.2.12', "Ping destination address")
defProperty('sinkaddr23', '192.168.1.13', "Ping destination address")

defProperty('sinkaddr31', '192.168.5.11', "Ping destination address")
defProperty('sinkaddr32', '192.168.2.10', "Ping destination address")
defProperty('sinkaddr33', '192.168.3.13', "Ping destination address")
defProperty('sinkaddr34', '192.168.6.14', "Ping destination address")

defProperty('sinkaddr41', '192.168.1.10', "Ping destination address")
defProperty('sinkaddr42', '192.168.3.12', "Ping destination address")

defProperty('sinkaddr51', '192.168.6.12', "Ping destination address")

defApplication('ping_app', 'pingmonitor') do |a|
    a.path = "/root/pingWrap.rb" 
    a.version(1, 2, 0)
    a.shortDescription = "Wrapper around ping" 
    a.description = "ping application"
    a.defProperty('dest_addr', 'Address to ping', '-a', {:type => :string, :dynamic => false})
    a.defProperty('count', 'Number of times to ping', '-c', {:type => :integer, :dynamic => false}) 
    a.defProperty('interval', 'Interval between pings in s', '-i', {:type => :integer, :dynamic => false})

    a.defMeasurement('myping') do |m|
     m.defMetric('dest_addr',:string) 
     m.defMetric('ttl',:int)
     m.defMetric('rtt',:float)
     m.defMetric('rtt_unit',:string)
   end
end

defGroup('Source1', property.source1) do |node|
  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr11)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end

  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr12)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end
end

defGroup('Source2', property.source2) do |node|
  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr21)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end

  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr22)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end

  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr23)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end
end

defGroup('Source3', property.source3) do |node|
  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr31)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end

  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr32)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end

  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr33)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end

  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr34)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end
end

defGroup('Source4', property.source4) do |node|

  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr41)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end

  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr42)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end
end

defGroup('Source5', property.source5) do |node|
  node.addApplication("ping_app") do |app|
    app.setProperty('dest_addr', property.sinkaddr51)
    app.setProperty('count', 30)
    app.setProperty('interval', 1)
    app.measure('myping', :samples => 1)
  end
end

onEvent(:ALL_UP_AND_INSTALLED) do |event|
  info "Starting the ping"
  allGroups.startApplications
  wait 5
  info "Stopping the ping"
  allGroups.stopApplications
  Experiment.done
end

The script is executed from the user workspace as follows:

$ cd ~/Tutorials/GIMI/common/
$ omf-5.4 exec --no-am -e gimiXX-ping_all -S gimiXX step1-ping_all.rb

Where gimiXX has to be replaced by the slice name you are using for your experiment.

You should see the following output after executing the omf command.

 INFO NodeHandler: OMF Experiment Controller 5.4 (git e0eefcf)
 INFO NodeHandler: Slice ID: gimi20 
 INFO NodeHandler: Experiment ID: gimi20-2012-10-18t14.03.42-04.00
 INFO NodeHandler: Message authentication is disabled
 WARN NodeHandler: AM support disabled - any service calls will fail!
 INFO Experiment: load system:exp:stdlib
 INFO property.resetDelay: resetDelay = 210 (Fixnum)
 INFO property.resetTries: resetTries = 1 (Fixnum)
 INFO Experiment: load system:exp:eventlib
 INFO Experiment: load ping_all.rb
 INFO property.source1: source1 = "nodeA" (String)
 INFO property.source2: source2 = "nodeB" (String)
 INFO property.source3: source3 = "nodeC" (String)
 INFO property.source4: source4 = "nodeD" (String)
 INFO property.source5: source5 = "nodeE" (String)
 INFO property.sinkaddr11: sinkaddr11 = "192.168.4.10" (String)
 INFO property.sinkaddr12: sinkaddr12 = "192.168.5.12" (String)
 INFO property.sinkaddr21: sinkaddr21 = "192.168.4.11" (String)
 INFO property.sinkaddr22: sinkaddr22 = "192.168.2.12" (String)
 INFO property.sinkaddr23: sinkaddr23 = "192.168.1.13" (String)
 INFO property.sinkaddr31: sinkaddr31 = "192.168.5.11" (String)
 INFO property.sinkaddr32: sinkaddr32 = "192.168.2.10" (String)
 INFO property.sinkaddr33: sinkaddr33 = "192.168.3.13" (String)
 INFO property.sinkaddr34: sinkaddr34 = "192.168.6.14" (String)
 INFO property.sinkaddr41: sinkaddr41 = "192.168.1.10" (String)
 INFO property.sinkaddr42: sinkaddr42 = "192.168.3.12" (String)
 INFO property.sinkaddr51: sinkaddr51 = "192.168.6.12" (String)
 INFO Topology: Loading topology 'nodeA'.
 INFO Topology: Loading topology 'nodeB'.
 INFO Topology: Loading topology 'nodeC'.
 INFO Topology: Loading topology 'nodeD'.
 INFO Topology: Loading topology 'nodeE'.
 INFO Experiment: Switching ON resources which are OFF
 INFO ALL_UP_AND_INSTALLED: Event triggered. Starting the associated tasks.
 INFO exp: Starting the ping
 INFO exp: Request from Experiment Script: Wait for 5s....
 INFO exp: Stopping the ping
 INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks.
 INFO NodeHandler: 
 INFO NodeHandler: Shutting down experiment, please wait...
 INFO NodeHandler: 
 INFO run: Experiment gimi20-2012-10-18t14.03.42-04.00 finished after 0:16

C.1.3 Setup Routing in Experiment Topology

In more complex topologies routing has to be set up. In our case, this is achieved with the aid of an http://emmy9.casa.umass.edu/GEC15-GIMI-Tutorial/step2-routing.rb OMF experiment script. The one we use for this tutorial is shown below.

defGroup('Node1', "nodeA")
defGroup('Node2', "nodeB")
defGroup('Node3', "nodeC")
defGroup('Node4', "nodeD")
defGroup('Node5', "nodeE")


onEvent(:ALL_UP) do |event|
  wait 1
  info 'Changing routing setup'

  group('Node1').exec("route add -net 192.168.1.0/24 gw 192.168.4.10")
  group('Node1').exec("route add -net 192.168.2.0/24 gw 192.168.4.10")
  group('Node1').exec("route add -net 192.168.3.0/24 gw 192.168.5.12")
  group('Node1').exec("route add -net 192.168.6.0/24 gw 192.168.5.12")
  group('Node1').exec("echo 1 >  /proc/sys/net/ipv4/ip_forward")

  group('Node2').exec("route add -net 192.168.3.0/24 gw 192.168.1.13")
  group('Node2').exec("route add -net 192.168.5.0/24 gw 192.168.4.11")
  group('Node2').exec("route add -net 192.168.6.0/24 gw 192.168.2.12")
  group('Node2').exec("echo 1 >  /proc/sys/net/ipv4/ip_forward")

  group('Node3').exec("route add -net 192.168.1.0/24 gw 192.168.3.13")
  group('Node3').exec("route add -net 192.168.4.0/24 gw 192.168.5.11")
  group('Node3').exec("echo 1 >  /proc/sys/net/ipv4/ip_forward")

  group('Node4').exec("route add -net 192.168.2.0/24 gw 192.168.3.12")
  group('Node4').exec("route add -net 192.168.4.0/24 gw 192.168.1.10")
  group('Node4').exec("route add -net 192.168.5.0/24 gw 192.168.3.12")
  group('Node4').exec("route add -net 192.168.6.0/24 gw 192.168.3.12")
  group('Node4').exec("echo 1 >  /proc/sys/net/ipv4/ip_forward")

  group('Node5').exec("route add -net 192.168.2.0/24 gw 192.168.6.12")
  group('Node5').exec("route add -net 192.168.1.0/24 gw 192.168.6.12")
  group('Node5').exec("route add -net 192.168.3.0/24 gw 192.168.6.12")
  group('Node5').exec("route add -net 192.168.4.0/24 gw 192.168.6.12")
  group('Node5').exec("route add -net 192.168.5.0/24 gw 192.168.6.12")

  info 'Routing setup finished'
  wait 5
  info 'Stopping applications'
  allGroups.stopApplications
  wait 1
  Experiment.done
end

This script can be easily adapted if the experimenter wishes to set up the routing between the nodes differently.

The script is executed from the user workspace as follows:

$ cd ~/Tutorials/GIMI/common/
$ omf-5.4 exec --no-am -e gimiXX-routing -S gimiXX step2-routing.rb

Where gimiXX has to be replaced by the slice name you are using for your experiment.

You should see the following output after executing the omf command.

 INFO NodeHandler: OMF Experiment Controller 5.4 (git e0eefcf)
 INFO NodeHandler: Slice ID: gimi20 
 INFO NodeHandler: Experiment ID: gimi20-2012-10-18t14.14.10-04.00
 INFO NodeHandler: Message authentication is disabled
 WARN NodeHandler: AM support disabled - any service calls will fail!
 INFO Experiment: load system:exp:stdlib
 INFO property.resetDelay: resetDelay = 210 (Fixnum)
 INFO property.resetTries: resetTries = 1 (Fixnum)
 INFO Experiment: load system:exp:eventlib
 INFO Experiment: load routing.rb
 INFO Topology: Loading topology 'nodeA'.
 INFO Topology: Loading topology 'nodeB'.
 INFO Topology: Loading topology 'nodeC'.
 INFO Topology: Loading topology 'nodeD'.
 INFO Topology: Loading topology 'nodeE'.
 INFO Experiment: Switching ON resources which are OFF
 INFO ALL_UP: Event triggered. Starting the associated tasks.
 INFO exp: Request from Experiment Script: Wait for 1s....
 INFO exp: Changing routing setup
 INFO exp: Routing setup finished
 INFO exp: Request from Experiment Script: Wait for 5s....
 INFO exp: Stopping applications
 INFO exp: Request from Experiment Script: Wait for 1s....
 INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks.
 INFO NodeHandler: 
 INFO NodeHandler: Shutting down experiment, please wait...
 INFO NodeHandler: 
 INFO run: Experiment gimi20-2012-10-18t14.14.10-04.00 finished after 0:16

C.1.4 Verification of Routing

After establishing the routing, we use an http://emmy9.casa.umass.edu/GEC15-GIMI-Tutorial/step3-ping_e2e.rb OMF experiment script that executes pings between each pair of nodes that contains one hop, to verify the correctness of routing setup.

defProperty('source1', "nodeA", "ID of a resource")
defProperty('source2', "nodeB", "ID of a resource")
defProperty('source3', "nodeC", "ID of a resource")
defProperty('source4', "nodeD", "ID of a resource")
defProperty('source5', "nodeE", "ID of a resource")

defProperty('sinkaddr11', '192.168.1.13', "Ping destination address")
defProperty('sinkaddr12', '192.168.3.13', "Ping destination address")
defProperty('sinkaddr13', '192.168.6.14', "Ping destination address")

defProperty('sinkaddr21', '192.168.6.14', "Ping destination address")

defProperty('sinkaddr41', '192.168.4.11', "Ping destination address")
defProperty('sinkaddr42', '192.168.5.11', "Ping destination address")
defProperty('sinkaddr43', '192.168.6.14', "Ping destination address")

defProperty('sinkaddr51', '192.168.5.11', "Ping destination address")
defProperty('sinkaddr52', '192.168.2.10', "Ping destination address")
defProperty('sinkaddr53', '192.168.3.13', "Ping destination address")

defApplication('ping_app', 'pingmonitor') do |a|
        a.path = "/root/pingWrap.rb"
        a.version(1, 2, 0)
        a.shortDescription = "Wrapper around ping"
        a.description = "ping application"
        a.defProperty('dest_addr', 'Address to ping', '-a', {:type => :string, :dynamic => false})
        a.defProperty('count', 'Number of times to ping', '-c', {:type => :integer, :dynamic => false})
        a.defProperty('interval', 'Interval between pings in s', '-i', {:type => :integer, :dynamic => false})
        
        a.defMeasurement('myping') do |m|
            m.defMetric('dest_addr',:string)
            m.defMetric('ttl',:int)
            m.defMetric('rtt',:float)
            m.defMetric('rtt_unit',:string)
        end
end

defGroup('Source1', property.source1) do |node|
      node.addApplication("ping_app") do |app|
          app.setProperty('dest_addr', property.sinkaddr11)
          app.setProperty('count', 30)
          app.setProperty('interval', 1)
          app.measure('myping', :samples => 1)
      end
      
      node.addApplication("ping_app") do |app|
          app.setProperty('dest_addr', property.sinkaddr12)
          app.setProperty('count', 30)
          app.setProperty('interval', 1)
          app.measure('myping', :samples => 1)
      end

      node.addApplication("ping_app") do |app|          
          app.setProperty('dest_addr', property.sinkaddr13)
          app.setProperty('count', 30)              
          app.setProperty('interval', 1)                  
          app.measure('myping', :samples => 1)
      end
end

defGroup('Source2', property.source1) do |node|
    node.addApplication("ping_app") do |app|              
        app.setProperty('dest_addr', property.sinkaddr21)        
        app.setProperty('count', 30)            
        app.setProperty('interval', 1)                
        app.measure('myping', :samples => 1)                  
    end                
end

defGroup('Source4', property.source3) do |node|
      node.addApplication("ping_app") do |app|
          app.setProperty('dest_addr', property.sinkaddr41)
          app.setProperty('count', 30)
          app.setProperty('interval', 1)
          app.measure('myping', :samples => 1)
      end

      node.addApplication("ping_app") do |app|
          app.setProperty('dest_addr', property.sinkaddr42)
          app.setProperty('count', 30)
          app.setProperty('interval', 1)
          app.measure('myping', :samples => 1)
      end

      node.addApplication("ping_app") do |app|
          app.setProperty('dest_addr', property.sinkaddr43)
          app.setProperty('count', 30)
          app.setProperty('interval', 1)
          app.measure('myping', :samples => 1)
      end
end

defGroup('Source5', property.source3) do |node|
          node.addApplication("ping_app") do |app|
              app.setProperty('dest_addr', property.sinkaddr51)
              app.setProperty('count', 30)
              app.setProperty('interval', 1)
              app.measure('myping', :samples => 1)
          end

          node.addApplication("ping_app") do |app|
              app.setProperty('dest_addr', property.sinkaddr52)
              app.setProperty('count', 30)
              app.setProperty('interval', 1)
              app.measure('myping', :samples => 1)
          end

          node.addApplication("ping_app") do |app|
              app.setProperty('dest_addr', property.sinkaddr53)
              app.setProperty('count', 30)
              app.setProperty('interval', 1)
              app.measure('myping', :samples => 1)
          end
end

onEvent(:ALL_UP_AND_INSTALLED) do |event|
      info "Starting the ping"
      allGroups.startApplications
      wait 5
      info "Stopping the ping"
      allGroups.stopApplications
      Experiment.done
end

The script is executed from the user workspace as follows:

$ cd ~/Tutorials/GIMI/common/
$ omf-5.4 exec --no-am -e gimiXX-ping_e2e -S gimiXX step3-ping_e2e.rb

Where gimiXX has to be replaced by the slice name you are using for your experiment.

You should see the following output after executing the omf command.

 INFO NodeHandler: OMF Experiment Controller 5.4 (git e0eefcf)
 INFO NodeHandler: Slice ID: gimi20 
 INFO NodeHandler: Experiment ID: gimi20-2012-10-18t14.03.42-04.00
 INFO NodeHandler: Message authentication is disabled
 WARN NodeHandler: AM support disabled - any service calls will fail!
 INFO Experiment: load system:exp:stdlib
 INFO property.resetDelay: resetDelay = 210 (Fixnum)
 INFO property.resetTries: resetTries = 1 (Fixnum)
 INFO Experiment: load system:exp:eventlib
 INFO Experiment: load ping_all.rb
 INFO property.source1: source1 = "nodeA" (String)
 INFO property.source2: source2 = "nodeB" (String)
 INFO property.source3: source3 = "nodeC" (String)
 INFO property.source4: source4 = "nodeD" (String)
 INFO property.source5: source5 = "nodeE" (String)
 INFO property.sinkaddr11: sinkaddr11 = "192.168.4.10" (String)
 INFO property.sinkaddr12: sinkaddr12 = "192.168.5.12" (String)
 INFO property.sinkaddr21: sinkaddr21 = "192.168.4.11" (String)
 INFO property.sinkaddr22: sinkaddr22 = "192.168.2.12" (String)
 INFO property.sinkaddr23: sinkaddr23 = "192.168.1.13" (String)
 INFO property.sinkaddr31: sinkaddr31 = "192.168.5.11" (String)
 INFO property.sinkaddr32: sinkaddr32 = "192.168.2.10" (String)
 INFO property.sinkaddr33: sinkaddr33 = "192.168.3.13" (String)
 INFO property.sinkaddr34: sinkaddr34 = "192.168.6.14" (String)
 INFO property.sinkaddr41: sinkaddr41 = "192.168.1.10" (String)
 INFO property.sinkaddr42: sinkaddr42 = "192.168.3.12" (String)
 INFO property.sinkaddr51: sinkaddr51 = "192.168.6.12" (String)
 INFO Topology: Loading topology 'nodeA'.
 INFO Topology: Loading topology 'nodeB'.
 INFO Topology: Loading topology 'nodeC'.
 INFO Topology: Loading topology 'nodeD'.
 INFO Topology: Loading topology 'nodeE'.
 INFO Experiment: Switching ON resources which are OFF
 INFO ALL_UP_AND_INSTALLED: Event triggered. Starting the associated tasks.
 INFO exp: Starting the ping
 INFO exp: Request from Experiment Script: Wait for 5s....
 INFO exp: Stopping the ping
 INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks.
 INFO NodeHandler: 
 INFO NodeHandler: Shutting down experiment, please wait...
 INFO NodeHandler: 
 INFO run: Experiment gimi20-2012-10-18t14.03.42-04.00 finished after 0:16

C.2 Running Actual Experiment

We will use an http://emmy9.casa.umass.edu/GEC15-GIMI-Tutorial/step4-otg_nmetrics.rb OMF experiment script to execute oml enabled traffic generator and receiver (otg and otr) to simulate network traffic, and use oml enabled nmetrics to measure the system usage (e.g., CUP, memory) and network interface usage on each of the participated ExoGENI nodes.

The one we use for this tutorial is shown below.

defProperty('theSender','nodeB','ID of sender node')
defProperty('theReceiver1', 'nodeE', "ID of receiver node")
defProperty('theReceiver2', 'nodeA', "ID of receiver node")
defProperty('theReceiver3', 'nodeD', "ID of receiver node")
defProperty('packetsize', 128, "Packet size (byte) from the sender node")
defProperty('bitrate', 2048, "Bitrate (bit/s) from the sender node")
defProperty('runtime', 40, "Time in second for the experiment is to run")

defGroup('Sender',property.theSender) do |node|
    options = { 'sample-interval' => 2 }
    node.addPrototype("system_monitor", options)
    node.addApplication("test:app:otg2") do |app|
        app.setProperty('udp:local_host', '192.168.2.10')
        app.setProperty('udp:dst_host', '192.168.6.14')
        app.setProperty('udp:dst_port', 3000)
        app.setProperty('cbr:size', property.packetsize)
        app.setProperty('cbr:rate', property.bitrate * 2)
        app.measure('udp_out', :samples => 1)
    end
    
    node.addApplication("test:app:otg2") do |app|
        app.setProperty('udp:local_host', '192.168.4.10')
        app.setProperty('udp:dst_host', '192.168.4.11')
        app.setProperty('udp:dst_port', 3000)
        app.setProperty('cbr:size', property.packetsize)
        app.setProperty('cbr:rate', property.bitrate * 2)
        app.measure('udp_out', :samples => 1)
    end
    
    node.addApplication("test:app:otg2") do |app|
        app.setProperty('udp:local_host', '192.168.1.10')
        app.setProperty('udp:dst_host', '192.168.1.13')
        app.setProperty('udp:dst_port', 3000)                                    
        app.setProperty('cbr:size', property.packetsize)                                            
        app.setProperty('cbr:rate', property.bitrate * 2)                                                    
        app.measure('udp_out', :samples => 1)                                                        
    end
end

defGroup('Receiver1',property.theReceiver1) do |node|
    options = { 'sample-interval' => 2 }
    node.addPrototype("system_monitor", options)

    node.addApplication("test:app:otr2") do |app|
        app.setProperty('udp:local_host', '192.168.6.14')
        app.setProperty('udp:local_port', 3000)
        app.measure('udp_in', :samples => 1)
    end
end

defGroup('Receiver2',property.theReceiver2) do |node|
    options = { 'sample-interval' => 2 }
    node.addPrototype("system_monitor", options)
    node.addApplication("test:app:otr2") do |app|
        app.setProperty('udp:local_host', '192.168.4.11')
        app.setProperty('udp:local_port', 3000)
        app.measure('udp_in', :samples => 1)
    end 
end

defGroup('Receiver3',property.theReceiver3) do |node|     
    options = { 'sample-interval' => 2 }
    node.addPrototype("system_monitor", options)
    node.addApplication("test:app:otr2") do |app|                    
        app.setProperty('udp:local_host', '192.168.1.13')
        app.setProperty('udp:local_port', 3000)                                
        app.measure('udp_in', :samples => 1)                                    
    end
end

onEvent(:ALL_UP_AND_INSTALLED) do |event|
    info "starting"
    wait 5
    allGroups.exec("ln -s /usr/local/bin/otr2 /usr/bin/otr2")
    allGroups.exec("ln -s /usr/local/bin/otg2 /usr/bin/otg2")
    allGroups.exec("ln -s /usr/local/bin/oml2-nmetrics /usr/bin/oml2-nmetrics")
    allGroups.startApplications
    info "All applications started..."
    wait property.runtime / 4
    property.packetsize = 256
    wait property.runtime / 4
    property.packetsize = 512
    wait property.runtime / 4
    property.packetsize = 1024
    wait property.runtime / 4
    allGroups.stopApplications
    info "All applications stopped." 
    Experiment.done
end

The script is executed from the user workspace as follows:

$ cd ~/Tutorials/GIMI/common/
$ omf-5.4 exec --no-am -e gimiXX-otg_nmetrics -S gimiXX step4-otg_nmetrics.rb

Where gimiXX has to be replaced by the slice name you are using for your experiment.

You should see the following output (or similar) after executing the omf command.

 INFO NodeHandler: OMF Experiment Controller 5.4 (git e0eefcf)
 INFO NodeHandler: Slice ID: gimi20 
 INFO NodeHandler: Experiment ID: gimi20-2012-10-18t13.51.41-04.00
 INFO NodeHandler: Message authentication is disabled
 WARN NodeHandler: AM support disabled - any service calls will fail!
 INFO Experiment: load system:exp:stdlib
 INFO property.resetDelay: resetDelay = 210 (Fixnum)
 INFO property.resetTries: resetTries = 1 (Fixnum)
 INFO Experiment: load system:exp:eventlib
 INFO Experiment: load otg_nmetrics.rb
 INFO property.theSender: theSender = "nodeB" (String)
 INFO property.theReceiver1: theReceiver1 = "nodeE" (String)
 INFO property.theReceiver2: theReceiver2 = "nodeA" (String)
 INFO property.theReceiver3: theReceiver3 = "nodeD" (String)
 INFO property.packetsize: packetsize = 128 (Fixnum)
 INFO property.bitrate: bitrate = 2048 (Fixnum)
 INFO property.runtime: runtime = 40 (Fixnum)
 INFO Topology: Loading topology 'nodeB'.
 INFO Topology: Loading topology 'nodeE'.
 INFO Topology: Loading topology 'nodeA'.
 INFO Topology: Loading topology 'nodeD'.
 INFO Experiment: Switching ON resources which are OFF
 INFO ALL_UP_AND_INSTALLED: Event triggered. Starting the associated tasks.
 INFO exp: starting
 INFO exp: Request from Experiment Script: Wait for 5s....
 INFO exp: All applications started...
 INFO exp: Request from Experiment Script: Wait for 10s....
 INFO property.packetsize: packetsize = 256 (Fixnum)
 INFO exp: Request from Experiment Script: Wait for 10s....
 INFO property.packetsize: packetsize = 512 (Fixnum)
 INFO exp: Request from Experiment Script: Wait for 10s....
 INFO property.packetsize: packetsize = 1024 (Fixnum)
 INFO exp: Request from Experiment Script: Wait for 10s....
 INFO exp: All applications stopped.
 INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks.
 INFO NodeHandler: 
 INFO NodeHandler: Shutting down experiment, please wait...
 INFO NodeHandler: 
 INFO run: Experiment gimi20-2012-10-18t13.51.41-04.00 finished after 0:56



http://groups.geni.net/geni/wiki/GIMIv1.1Tutorial/Slice Back to previous step

http://groups.geni.net/geni/wiki/GIMIv1.1Tutorial/Observe Forward to next step

http://groups.geni.net/geni/wiki/GIMIv1.1Tutorial/ Back to tutorial main page

Attachments (4)

Download all attachments as: .zip