Changes between Version 29 and Version 30 of GENIWiMaxTridentcomTutorial


Ignore:
Timestamp:
06/11/12 07:54:30 (12 years ago)
Author:
hmussman@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIWiMaxTridentcomTutorial

    v29 v30  
    4444Participants will learn how to begin an experiment with a "fresh slate" by loading a new disk image onto their nodes and resetting the WiMAX base station to its default state.[[br]]
    4545
    46 [  Demo]  [[BR]]
     46[  Demo #3]  [[BR]]
    4747
    4848[http://witestlab.poly.edu/index.php/tutorials/27-starting-an-experiment.html Instructions #3][[br]]
     
    5858Participants will run a simple OMF experiment in which two nodes are configured to connect to the GENI WiMAX network and their WiMAX RSSI and CINR is stored by OML and plotted on the web interface during experiment runtime. They also learn how to use the ''result'' service of the AM. [[br]]
    5959
    60 [  Demo]  [[BR]]
     60[  Demo #4]  [[BR]]
    6161
    6262[http://witestlab.poly.edu/index.php/tutorials/28-4-basic-wimax-rssi-experiment.html Instructions #4][[br]]
     
    7474Participants will extend the previous simple experiment. Each of their nodes will be assigned an IP address and will listen for UDP traffic from a broadcast sender, using iperf. The iperf bandwidth and packet loss will be plotted on the web interface. [[br]]
    7575
    76 [  Demo]  [[BR]]
     76[  Demo #5]  [[BR]]
    7777
    7878[http://witestlab.poly.edu/index.php/tutorials/29-5-iperf-udp-broadcast-receiver-experiment.html Instructions #5][[br]]
     
    8888Participants will run an OML-ized script that retrieve the WiMAX BS config and stores it in an OML database. [[br]]
    8989
    90 [  Demo]  [[BR]]
     90[  Demo #6]  [[BR]]
    9191
    9292[http://witestlab.poly.edu/index.php/tutorials/31-6-saving-bs-config-to-oml.html Instructions #6][[br]]
     
    102102Participants will run an OMF experiment that turns off adaptive modulation and coding, then varies the MCS used at regular intervals during experiment runtime. Participants can see the effect of varying MCS by observing the packet loss graph shown in the web interface. [[br]]
    103103
    104 [  Demo]  [[BR]]
     104[  Demo #7]  [[BR]]
    105105
    106106[http://witestlab.poly.edu/index.php/tutorials/30-7-varying-modulation-and-coding-experiment.html Instructions #7][[br]]