Changes between Version 28 and Version 29 of GENIWiMaxTridentcomTutorial


Ignore:
Timestamp:
06/11/12 07:53:15 (12 years ago)
Author:
hmussman@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIWiMaxTridentcomTutorial

    v28 v29  
    3535Participants will login to designated sites using their assigned credentials, to begin the hands-on portion of the tutorial.
    3636
    37 '''Note to testbed operators: '''
    38  * We will prepare for 6 teams at Poly, 4 on sb4, 6 on grid (this gives us resources for 15 teams with one backup set). Manu will perform the tutorial at BBN and use screen sharing via Webex to project the demonstration to the tutorial participants.
    39  * Each team needs a username, password, address of console to log into, and names of two assigned nodes (and possibly address of experiment web interface and result service, if they are different from the console address)
    40  * To make things interesting, we would ideally give each team one node with a very good channel quality and one node with a fair channel quality. It's probably a good idea to figure out ahead of time which nodes have the desired channel quality (in the case of sb4, exactly what settings we want so that we will have the right signal strengths)
    41  * Remember to enable tutorial accounts before the tutorial begins.
    42 
    4337
    4438
     
    5246[  Demo]  [[BR]]
    5347
    54 [http://witestlab.poly.edu/index.php/tutorials/27-starting-an-experiment.html Instructions][[br]]
     48[http://witestlab.poly.edu/index.php/tutorials/27-starting-an-experiment.html Instructions #3][[br]]
    5549
    5650This requires coordination between different teams using the same BS, since only one team should reset a given BS at a time.
    5751
    58 '''Note to testbed operators: '''
    59  * Make sure ''omf5.3 load'' works!
    60  * Make sure your WiMAX base station has sane defaults.
    61  * The hostname "wimaxrf" should resolve to your BS controller from the console where tutorial users will be logged in (i.e., the wimaxrf service should be located at http://wimaxrf:5052/wimaxrf)
    62  * For the sake of consistency, we will use a common image name for every testbed - '''wmx-tutorial.ndz'''. Make sure this image is installed in the appropriate location
    6352
    6453
     
    7160[  Demo]  [[BR]]
    7261
    73 [http://witestlab.poly.edu/index.php/tutorials/28-4-basic-wimax-rssi-experiment.html Instructions][[br]]
     62[http://witestlab.poly.edu/index.php/tutorials/28-4-basic-wimax-rssi-experiment.html Instructions #4][[br]]
    7463
    7564(Since several users will be running experiments on the same AM in parallel, not all users will find their web interface at port 4000.) [[br]]
    76 This experiment does not require coordination between different teams using the same BS.
     65
     66This experiment does not require coordination between different teams using the same BS.[[BR]]
    7767
    7868
    79 '''Note to testbed operators: '''
    80  * The [http://omfserver-witest.poly.edu/wmx-tut01.rb experiment script] should be in the home directories of the tutorial users, with the node names in the experiment script substituted for the team's actual designated nodes. For the sake of consistency, we will use a common name for this experiment script - '''wmx-tut01.rb''').
    81  * The web interface for OMF experiments should be accessible from the public Internet. If the address of the web interface is different from the address that participants SSH into, note this address together with the credentials.
    82  * The necessary files for the wimaxcu wrapper (including oml4r.rb) should be installed on the tutorial disk image
    83  * On the experiment controller, the application definition wimaxcu_app.rb must be installed.
    84  * The result service should be accessible from the public Internet. If the address of the result service is different from the address that participants SSH into, note this address together with the credentials.
    8569
    8670== 5.  Iperf UDP broadcast receiver experiment ==
     
    9276[  Demo]  [[BR]]
    9377
    94 [http://witestlab.poly.edu/index.php/tutorials/29-5-iperf-udp-broadcast-receiver-experiment.html Instructions][[br]]
     78[http://witestlab.poly.edu/index.php/tutorials/29-5-iperf-udp-broadcast-receiver-experiment.html Instructions #5][[br]]
    9579
    96 This experiment does not require coordination between different teams using the same BS.
     80This experiment does not require coordination between different teams using the same BS.[[BR]]
    9781
    98 '''Note to testbed operators: '''
    99  * The [http://omfserver-witest.poly.edu/wmx-tut02.rb experiment script] should be in the home directories of the tutorial users, with the node names in the experiment script substituted for the team's actual designated nodes. For the sake of consistency, we will use a common name for this experiment script - '''wmx-tut02.rb''').
    100  * The same requirements as in the "Basic WiMAX RSSI Experiment" apply
    101  * The old iperf_oml2 should be installed on the tutorial disk image
    102  * The application definition with the -B parameter enabled (I don't think it is by default) should be installed on the EC.
    103  * The broadcast sender and bridging across VLANs will be provided by Winlab.
    104  * Each site needs to modify the line in the script where the IP address is assigned, to reflect that site's own X in 10.43.X.Y
    10582
    10683
     
    11390[  Demo]  [[BR]]
    11491
    115 [http://witestlab.poly.edu/index.php/tutorials/31-6-saving-bs-config-to-oml.html Instructions][[br]]
     92[http://witestlab.poly.edu/index.php/tutorials/31-6-saving-bs-config-to-oml.html Instructions #6][[br]]
    11693
    11794This experiment does not require coordination between different teams using the same BS.
    11895
    119 '''Note to testbed operators: '''
    120  * This [http://witestlab.poly.edu/files/getbsconf script] should be installed at the user console
    121  * The script has the following Ruby prerequisites: xmlsimple, net-http, and oml4r
    12296
    12397
     
    130104[  Demo]  [[BR]]
    131105
    132 [http://witestlab.poly.edu/index.php/tutorials/30-7-varying-modulation-and-coding-experiment.html Instructions][[br]]
     106[http://witestlab.poly.edu/index.php/tutorials/30-7-varying-modulation-and-coding-experiment.html Instructions #7][[br]]
    133107
    134108This experiment requires coordination between different teams using the same BS. Only one team should change the BS settings at a time.
    135 
    136 '''Note to testbed operators: '''
    137  * The [http://omfserver-witest.poly.edu/wmx-tut03.rb experiment script] should be in the home directories of the tutorial users, with the node names in the experiment script substituted for the team's actual designated nodes. For the sake of consistency, we will use a common name for this experiment script - '''wmx-tut03.rb''').
    138  * The same requirements as in the "Iperf UDP Broadcast Receiver Experiment" apply
    139  * The same requirements as in "Starting an experiment" apply
    140  
    141109
    142110