Changes between Version 20 and Version 21 of GENIWiMaxTridentcomTutorial


Ignore:
Timestamp:
06/11/12 05:24:06 (12 years ago)
Author:
hmussman@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIWiMaxTridentcomTutorial

    v20 v21  
    4949Participants learn how to begin an experiment with a "fresh slate" by loading a new disk image onto their nodes and resetting the WiMAX base station to its default state.[[br]]
    5050
    51 [  Demo}  [[BR]]
     51[  Demo]  [[BR]]
    5252
    5353[http://witestlab.poly.edu/index.php/tutorials/27-starting-an-experiment.html Instructions][[br]]
     
    6868Participants run a simple OMF experiment in which two nodes are configured to connect to the GENI WiMAX network and their WiMAX RSSI and CINR is stored by OML and plotted on the web interface during experiment runtime. They also learn how to use the ''result'' service of the AM. [[br]]
    6969
     70[  Demo]  [[BR]]
     71
    7072[http://witestlab.poly.edu/index.php/tutorials/28-4-basic-wimax-rssi-experiment.html Instructions][[br]]
     73
    7174(Since several users will be running experiments on the same AM in parallel, not all users will find their web interface at port 4000.) [[br]]
    7275This experiment does not require coordination between different teams using the same BS.
     
    8689Participants will extend the previous simple experiment. Each of their nodes will be assigned an IP address and will listen for UDP traffic from a broadcast sender, using iperf. The iperf bandwidth and packet loss will be plotted on the web interface. [[br]]
    8790
     91[  Demo]  [[BR]]
     92
    8893[http://witestlab.poly.edu/index.php/tutorials/29-5-iperf-udp-broadcast-receiver-experiment.html Instructions][[br]]
     94
    8995This experiment does not require coordination between different teams using the same BS.
    9096
     
    104110Participants will run an OML-ized script that retrieve the WiMAX BS config and stores it in an OML database. [[br]]
    105111
     112[  Demo]  [[BR]]
     113
    106114[http://witestlab.poly.edu/index.php/tutorials/31-6-saving-bs-config-to-oml.html Instructions][[br]]
     115
    107116This experiment does not require coordination between different teams using the same BS.
    108117
     
    118127Participants will run an OMF experiment that turns off adaptive modulation and coding, then varies the MCS used at regular intervals during experiment runtime. Participants can see the effect of varying MCS by observing the packet loss graph shown in the web interface. [[br]]
    119128
     129[  Demo]  [[BR]]
     130
    120131[http://witestlab.poly.edu/index.php/tutorials/30-7-varying-modulation-and-coding-experiment.html Instructions][[br]]
     132
    121133This experiment requires coordination between different teams using the same BS. Only one team should change the BS settings at a time.
    122134