Changes between Version 9 and Version 10 of GENIWiMaxTridentcomTutorial


Ignore:
Timestamp:
06/11/12 03:27:02 (12 years ago)
Author:
hmussman@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIWiMaxTridentcomTutorial

    v9 v10  
     1[[PageOutline]]
     2
    13'''Experimentation in a Multi-site GENI WiMAX Network using Orbit Management Framework''' [[br]]
    2 Presenters: Ivan Seskar (Rutgers WINLAB, North Brunswick, NJ, USA), Fraida Fund (Polytechnic Institute of New York University, New York, USA), Abhimanyu Gosain (GENI Project Office, Cambridge, USA), Harry Mussman (GENI Project Office, Cambridge, USA) [[br]][[br]]
     4Presenters: [[BR]]
     5Ivan Seskar (Rutgers WINLAB, North Brunswick, NJ, USA) [[BR]]
     6Fraida Fund (Polytechnic Institute of New York University, New York, USA)  [[BR]]
     7Abhimanyu Gosain (GENI Project Office, Cambridge, USA)  [[BR]]
     8Harry Mussman (GENI Project Office, Cambridge, USA) [[br]]
    39
    4 The tutorial provides attendees a hands-on experience using Orbit Management Framework (OMF) to define IP and Non-IP experiments across a multi-site GENI WiMAX deployment. The tutorial focuses on using OMF, a resource management, experiment control, and measurement framework to define and conduct experiments on a multi-site WiMAX deployment. This tutorial demonstrates the use of OMF experimenter tools to control and tune parameters of a complex WiMAX Base station to carefully collect and analyze test results in a repeatable manner. We will focus on the OMF interface for WiMAX and demonstrate the communication between WiMAX clients over the GENI layer two network. [[br]][[br]]
     10Abstract:  [[BR]]
     11The tutorial provides attendees a hands-on experience using Orbit Management Framework (OMF) to define IP and Non-IP experiments across a multi-site GENI WiMAX deployment. The tutorial focuses on using OMF, a resource management, experiment control, and measurement framework to define and conduct experiments on a multi-site WiMAX deployment. This tutorial demonstrates the use of OMF experimenter tools to control and tune parameters of a complex WiMAX Base station to carefully collect and analyze test results in a repeatable manner. We will focus on the OMF interface for WiMAX and demonstrate the communication between WiMAX clients over the GENI layer two network. [[br]]
    512
     13Requirements:  [[BR]]
    614Active participants will need a laptop equipped with an SSH client (such as [http://www.chiark.greenend.org.uk/~sgtatham/putty/ Putty] for Windows) and a web browser. [[br]]
    715
    8 [http://groups.geni.net/geni/wiki/GEC13Agenda/WiMAXTutorial GEC13 Tutorial]
    916
    10 == Brief introduction to GENI WiMAX ==
     17
     18== 1.  Introduction to GENI WiMAX ==
    1119
    1220'''Aim:''' Introduction to GENI WiMAX.
     
    2230 * Remember to enable tutorial accounts before the tutorial begins.
    2331
    24 == Starting an experiment ==
     32== 2.  Starting an experiment ==
    2533
    2634'''Aim:''' Learn how to reset a GENI WiMAX testbed to a usable state before starting an experiment.
     
    3846 * For the sake of consistency, we will use a common image name for every testbed - '''wmx-tutorial.ndz'''. Make sure this image is installed in the appropriate location
    3947
    40 == Basic WiMAX RSSI Experiment ==
     48== 3.  Basic WiMAX RSSI Experiment ==
    4149
    4250'''Aim:''' Learn how to run a simple OMF experiment, connect to GENI WiMAX using OMF, and view captured data during and after the experiment.
     
    5664 * The result service should be accessible from the public Internet. If the address of the result service is different from the address that participants SSH into, note this address together with the credentials.
    5765
    58 == Iperf UDP Broadcast Receiver ==
     66== 4.  Iperf UDP Broadcast Receiver ==
    5967
    6068'''Aim:''' Learn how to send/receive traffic over the WiMAX link.
     
    7482
    7583
    76 == Saving BS Config to OML ==
     84== 5.  Saving BS Config to OML ==
    7785
    7886'''Aim:''' Learn how to retrieve and examine WiMAX BS configuration.
     
    8896
    8997
    90 == Varying Modulation and Coding ==
     98== 6.  Varying Modulation and Coding ==
    9199
    92100'''Aim:''' Learn how to change the configuration on a GENI WiMAX BS.
     
    103111 
    104112
    105 == Multisite Demo ==
     113== 7.  Multisite Demo ==
    106114
    107115TBD