154 | | '''[#GENIStarterRacks Starter Racks]''': Deployed by the GPO, a project to deliver an early low-end solution for GENI Racks. |
155 | | |
156 | | The Starter Racks project is an effort to get [http://www.nsf.gov/cise/usignite/ US Ignite] cities connected to the GENI Network to facilitate experimental network and compute research, and city application development. The Starter racks jump start the delivery of fully integrated network and compute resources to selected sites. At this time, the Starter racks do not deliver GENI software features such as an Aggregate Manager. Starter Racks can be used as Meso-scale !OpenFlow Site, but requires GPO Infrastructure support to implement, if you are interested in running !OpenFlow on a deployed Starter rack contact [mailto:help@geni.net]. If you would like to make your own GENI Starter rack, see the [#GetYourOwnGENIRack section] below. |
| 154 | '''[#GENIStarterRacks Starter Racks]''': No longer deployed by the GPO, this project delivered an early low-end solution for GENI Racks. |
| 155 | |
| 156 | The Starter Racks project was an effort to get [http://www.nsf.gov/cise/usignite/ US Ignite] cities connected to the GENI Network to facilitate experimental network and compute research, and city application development. The Starter Racks jump started the delivery of fully integrated network and compute resources to selected sites. During this period, the Starter racks did not deliver GENI software features such as an Aggregate Manager. In any case, it was possible to use a starter rack as a Meso-scale !OpenFlow Site, but required GPO Infrastructure support for implementation. Furthermore, details were provided in the [#GetYourOwnGENIRack section] below to build your own Starter rack. |
192 | | Each GENI Starter Rack systems requires a specific setup, which is captured for each of the rack components: Router, !OpenFlow Switch, IPKVM, Eucalyptus Head Host, Eucalyptus Worker Hosts, and Monitor Node. See the '''[wiki:GENIRacks/StarterCompSetup Starter Component Setup]''' for details about the required configuration. For specific details about the configuration settings, please contact [mailto:help@geni.net help@geni.net]. Some examples are available to get insight into '''[wiki:GENIRacksAdministration#StarterracksAdmin Starter Racks Administration]''' tasks. |
| 192 | Each GENI Starter Rack systems required a specific setup, which was captured for each of the rack components: Router, !OpenFlow Switch, IPKVM, Eucalyptus Head Host, Eucalyptus Worker Hosts, and Monitor Node. See the '''[wiki:GENIRacks/StarterCompSetup Starter Component Setup]''' for details about the required configuration. Some examples are available to get insight into '''[wiki:GENIRacksAdministration#StarterracksAdmin Starter Racks Administration]''' tasks. |
195 | | Starter Racks meet the following [wiki:GeniRacks#D.MonitoringRequirements monitoring requirements]. Monitoring data for the 3 deployed Starter Racks, GPO, Chattanooga and Cleveland is available at the [http://monitor.gpolab.bbn.com/ganglia/ GPOLab Monitor] portal, where the user can select a location and get monitoring detail for ''System load'', ''CPU load'', ''Memory usage'', and ''Network usage''. In addition, ''Services Health'' is monitored on each of the GENI Starter Racks and alert notifications are available upon request, contact [mailto:help@geni.net] to become a notification recipient. To access the ''Service Health'' detail on demand, go to the [http://monitor.gpolab.bbn.com/nagios/cgi-bin/status.cgi Service Status Details] page for all Starter rack sites. |
| 195 | Starter Racks met the following [wiki:GeniRacks#D.MonitoringRequirements monitoring requirements]. Monitoring data for the 3 deployed Starter Racks, GPO, Chattanooga and Cleveland was available at the [http://monitor.gpolab.bbn.com/ganglia/ GPOLab Monitor] portal, where the user selected a location and received monitoring detail for ''System load'', ''CPU load'', ''Memory usage'', and ''Network usage''. In addition, ''Services Health'' was monitored on each of the GENI Starter Racks and alert notifications were available upon request. Access to the ''Service Health'' details was provided via the [http://monitor.gpolab.bbn.com/nagios/cgi-bin/status.cgi Service Status Details] page for all Starter rack sites. |