[[PageOutline]] = University of Louisiana at Lafayette InstaGENI US Ignite Confirmation Tests = For details about the tests in this page, see the '''[wiki:GENIRacksHome/InstageniRacks/SiteConfirmationTests InstaGENI Confirmation Tests]''' page.[[BR]] For site status see the '''[wiki:GENIRacksHome/InstageniRacks/ConfirmationTestStatus InstaGENI New Site Confirmation Tests Status]''' page. __Note:__ Omni nick_names for site aggregates used for these tests are: {{{ ullafayette-ig=urn:publicid:IDN+instageni.louisiana.edu+authority+cm,https://instageni.louisiana.edu:12369/protogeni/xmlrpc/am/2.0 }}} == IG-CT-1 - Access to New Site VM resources == Aggregate Version: {{{ $ omni getversion -a ullafayette-ig }}} The InstaGENI version in "'code_tag':'a4dcba972ec27a89499cbe5500ed6d071a854551'" is the same as the other InstaGENI US Ignite sites: || '''Site''' || ''' InstaGENI Code tag ''' || || louisiana-edu || a4dcba972ec27a89499cbe5500ed6d071a854551 || || utdallas-edu || a4dcba972ec27a89499cbe5500ed6d071a854551 || || uvm-edu || a4dcba972ec27a89499cbe5500ed6d071a854551 || Get list of "available" compute resources: {{{ $ omni -a ullafayette-ig listresources --available -o }}} Verified that Advertisement RSpec only includes available resources, as requested: {{{ $ egrep "node comp|available now" rspec-instageni-louisiana-edu.xml }}} Created a slice and a 4 VMs sliver using the RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/ULLafayette/IG-CT-1.rspec IG-CT-1.rspec]: {{{ $ stitcher createsliver -a ullafayette-ig IG-CT-1 IG-CT-1.rspec 09:20:54 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 09:20:54 INFO : Not a bound multi-aggregate request - let Omni handle this. 09:20:54 INFO : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache' 09:20:54 INFO : Loading config file '/home/lnevers/.gcf/omni_config' 09:20:54 INFO : Using control framework portal 09:20:54 INFO : Member Authority is https://ch.geni.net/MA (from config) 09:20:54 INFO : Slice Authority is https://ch.geni.net/SA (from config) 09:20:54 INFO : Substituting AM nickname ullafayette-ig with URL https://instageni.louisiana.edu:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.louisiana.edu+authority+cm 09:20:54 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-1 expires on 2017-05-16 13:18:22 UTC 09:20:54 INFO : Creating sliver(s) from rspec file IG-CT-1.rspec for slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-1 09:21:15 INFO : (PG log url - look here for details on any failures: https://www.instageni.louisiana.edu/spewlogfile.php3?logfile=a916c495a81e261b973ff969d88bb9c4) 09:21:15 INFO : Got return from CreateSliver for slice IG-CT-1 at ulla-ig: 09:21:15 INFO : 09:21:15 INFO : 09:21:15 INFO : 09:21:15 INFO : Reservation at ulla-ig in slice IG-CT-1 expires at 2017-05-16 13:18:22 (UTC). Got Reserved resources RSpec from instageni-louisiana-edu. Reservation at ulla-ig in slice IG-CT-1 expires at 2017-05-16 13:18:22 (UTC). }}} The following is login information for the sliver: {{{ $ readyToLogin -a ullafayette-ig IG-CT-1 <...> xen4's geni_status is: ready User lnevers logs in to xen4 using: ssh -p 25042 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.louisiana.edu xen3's geni_status is: ready User lnevers logs in to xen3 using: ssh -p 25043 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.louisiana.edu xen2's geni_status is: ready User lnevers logs in to xen2 using: ssh -p 25042 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.louisiana.edu xen1's geni_status is: ready User lnevers logs in to xen1 using: ssh -p 25042 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.louisiana.edu }}} === Measurements === Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth: '''Iperf InstaGENI ULLafayette VM-2 to VM-1 (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-05-09'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 687 MBytes 96.0 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.0 sec 130 MBytes 18.1 Mbits/sec [ 4] 0.0-60.0 sec 130 MBytes 18.1 Mbits/sec [ 7] 0.0-60.3 sec 175 MBytes 24.3 Mbits/sec [ 3] 0.0-60.5 sec 138 MBytes 19.2 Mbits/sec [ 6] 0.0-60.5 sec 126 MBytes 17.5 Mbits/sec [SUM] 0.0-60.5 sec 698 MBytes 96.9 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 12] 0.0-60.0 sec 73.4 MBytes 10.3 Mbits/sec [ 11] 0.0-60.2 sec 64.5 MBytes 8.99 Mbits/sec [ 9] 0.0-60.4 sec 64.6 MBytes 8.98 Mbits/sec [ 4] 0.0-60.4 sec 74.2 MBytes 10.3 Mbits/sec [ 7] 0.0-60.4 sec 73.9 MBytes 10.3 Mbits/sec [ 10] 0.0-60.4 sec 65.5 MBytes 9.10 Mbits/sec [ 8] 0.0-60.4 sec 64.2 MBytes 8.92 Mbits/sec [ 6] 0.0-60.5 sec 74.6 MBytes 10.4 Mbits/sec [ 3] 0.0-60.5 sec 65.1 MBytes 9.03 Mbits/sec [ 5] 0.0-60.6 sec 74.1 MBytes 10.3 Mbits/sec [SUM] 0.0-60.6 sec 694 MBytes 96.1 Mbits/sec }}} '''Iperf InstaGENI ULLafayette VM-2 to the VM-1 (UDP) - UDP buffer size: 208 KByte (default)''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512814 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 688 MBytes 96.2 Mbits/sec 0.017 ms 22095/512813 (4.3%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI ULLafayette VM-2 to the VM-1 ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 58998ms rtt min/avg/max/mdev = 0.513/0.609/2.749/0.287 ms }}} == IG-CT-2 - Access to New Site bare metal and VM resources == Created a slice and a sliver with one VM and one Raw PC using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/ULLafayette/IG-CT-2.rspec IG-CT-2.rspec] {{{ $ stitcher createsliver -a ullafayette-ig IG-CT-2 IG-CT-2.rspec 09:55:14 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 09:55:14 INFO : Not a bound multi-aggregate request - let Omni handle this. 09:55:14 INFO : Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache' 09:55:14 INFO : Loading config file '/home/lnevers/.gcf/omni_config' 09:55:14 INFO : Using control framework portal 09:55:14 INFO : Member Authority is https://ch.geni.net/MA (from config) 09:55:14 INFO : Slice Authority is https://ch.geni.net/SA (from config) 09:55:14 INFO : Substituting AM nickname ullafayette-ig with URL https://instageni.louisiana.edu:12369/protogeni/xmlrpc/am/2.0, URN urn:publicid:IDN+instageni.louisiana.edu+authority+cm 09:55:15 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-2 expires on 2017-05-16 13:54:59 UTC 09:55:15 INFO : Creating sliver(s) from rspec file IG-CT-2.rspec for slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-2 09:55:34 INFO : (PG log url - look here for details on any failures: https://www.instageni.louisiana.edu/spewlogfile.php3?logfile=57cc552f2427fdd663dc746634d1ae00) 09:55:34 INFO : Got return from CreateSliver for slice IG-CT-2 at ulla-ig: 09:55:34 INFO : 09:55:34 INFO : 09:55:34 INFO : 09:55:34 INFO : Reservation at ulla-ig in slice IG-CT-2 expires at 2017-05-16 13:54:59 (UTC). Got Reserved resources RSpec from instageni-louisiana-edu. Reservation at ulla-ig in slice IG-CT-2 expires at 2017-05-16 13:54:59 (UTC). }}} Determined login information: {{{ $ readyToLogin -a ullafayette-ig IG-CT-2 <...> PC's geni_status is: ready User lnevers logs in to PC using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.louisiana.edu VM's geni_status is: ready User lnevers logs in to VM using: ssh -p 25106 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.louisiana.edu }}} === Measurements === Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth: '''Iperf InstaGENI ULLafayette PC to VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-05-09'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 685 MBytes 95.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.0 sec 136 MBytes 18.9 Mbits/sec [ 7] 0.0-60.0 sec 138 MBytes 19.3 Mbits/sec [ 5] 0.0-60.1 sec 144 MBytes 20.1 Mbits/sec [ 6] 0.0-60.1 sec 135 MBytes 18.9 Mbits/sec [ 3] 0.0-60.1 sec 135 MBytes 18.9 Mbits/sec [SUM] 0.0-60.1 sec 688 MBytes 96.1 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 68.5 MBytes 9.57 Mbits/sec [ 4] 0.0-60.1 sec 68.5 MBytes 9.57 Mbits/sec [ 6] 0.0-60.2 sec 68.6 MBytes 9.57 Mbits/sec [ 12] 0.0-60.2 sec 68.6 MBytes 9.57 Mbits/sec [ 10] 0.0-60.2 sec 68.5 MBytes 9.55 Mbits/sec [ 5] 0.0-60.2 sec 68.5 MBytes 9.55 Mbits/sec [ 7] 0.0-60.2 sec 68.5 MBytes 9.55 Mbits/sec [ 11] 0.0-60.2 sec 68.5 MBytes 9.55 Mbits/sec [ 9] 0.0-60.3 sec 68.6 MBytes 9.55 Mbits/sec [ 8] 0.0-60.3 sec 68.6 MBytes 9.55 Mbits/sec [SUM] 0.0-60.3 sec 686 MBytes 95.4 Mbits/sec }}} '''Iperf InstaGENI ULLafayette PC to the VM (UDP) - UDP buffer size: 208 KByte (default)''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 694 MBytes 97.0 Mbits/sec [ 3] Sent 494952 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 694 MBytes 96.9 Mbits/sec 0.004 ms 127/494951 (0.026%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI ULLafayette PC to VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 58999ms rtt min/avg/max/mdev = 0.334/0.374/0.407/0.027 ms }}} '''Iperf InstaGENI ULLafayette VM to PC (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-05-09'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 686 MBytes 95.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 6] 0.0-60.0 sec 134 MBytes 18.7 Mbits/sec [ 3] 0.0-60.1 sec 144 MBytes 20.1 Mbits/sec [ 5] 0.0-60.1 sec 135 MBytes 18.8 Mbits/sec [ 7] 0.0-60.1 sec 133 MBytes 18.6 Mbits/sec [ 4] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec [SUM] 0.0-60.1 sec 685 MBytes 95.5 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 71.2 MBytes 9.95 Mbits/sec [ 7] 0.0-60.1 sec 67.8 MBytes 9.46 Mbits/sec [ 5] 0.0-60.1 sec 66.4 MBytes 9.26 Mbits/sec [ 11] 0.0-60.1 sec 68.6 MBytes 9.57 Mbits/sec [ 4] 0.0-60.1 sec 73.0 MBytes 10.2 Mbits/sec [ 12] 0.0-60.1 sec 66.6 MBytes 9.29 Mbits/sec [ 9] 0.0-60.2 sec 67.1 MBytes 9.36 Mbits/sec [ 10] 0.0-60.2 sec 70.1 MBytes 9.77 Mbits/sec [ 6] 0.0-60.2 sec 70.1 MBytes 9.77 Mbits/sec [ 8] 0.0-60.5 sec 65.2 MBytes 9.05 Mbits/sec [SUM] 0.0-60.5 sec 686 MBytes 95.2 Mbits/sec }}} '''Iperf InstaGENI ULLafayette VM to the PC (UDP) - UDP buffer size: 208 KByte (default)''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512816 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 695 MBytes 97.1 Mbits/sec 0.036 ms 17266/512815 (3.4%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI ULLafayette VM to PC ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59000ms rtt min/avg/max/mdev = 0.312/0.370/0.414/0.024 ms }}} == IG-CT-3 - Multiple sites experiment == Created a slice and a sliver with one VM at ULLafayette and one VMi at GPO using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/InstaGENI/Spiral5/RSpecs/ConfirmationTests/ULLafayette/IG-CT-3.rspec IG-CT-3.rspec]. Used stitcher to create both the ULLafayette and GPO slivers: {{{ $ stitcher createsliver IG-CT-3a IG-CT-3.rspec 10:29:19 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 10:29:19 INFO : Reading slice IG-CT-3a credential... 10:29:19 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-CT-3a expires on 2017-05-16 14:29:14 UTC 10:29:19 INFO : Multi-AM reservation will include resources from these aggregates: 10:29:19 INFO : 10:29:19 INFO : 10:29:19 INFO : Stitcher doing createsliver at ... 10:29:38 INFO : ... Allocation at complete. 10:29:38 INFO : Stitcher doing createsliver at ... 10:29:57 INFO : ... Allocation at complete. 10:29:57 INFO : All aggregates are complete. 10:29:57 INFO : Your resources expire at 2017-05-15T14:19:19 (UTC). 10:29:57 INFO : Saved combined reservation RSpec at 2 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-CT-3a-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-CT-3a at 2 Aggregates, creating 1 GRE link(s). }}} Determined login information at each ULLafayette and GPO aggregate: {{{ $ readyToLogin IG-CT-3 --useSliceAggregates ig-ulla's geni_status is: ready User lnevers logs in to ig-ulla using: ssh -p 25138 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.louisiana.edu ig-nyse's geni_status is: changing User lnevers logs in to ig-gpo using: ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.nysernet.org }}} === Measurements === '''Iperf InstaGENI NYSERNet VM to ULLafayette VM (TCP) - TCP window size: 45.0 KByte (default)''' ''Collected: 2017-05-09'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 651 MBytes 90.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 4] 0.0-60.2 sec 126 MBytes 17.5 Mbits/sec [ 5] 0.0-60.2 sec 130 MBytes 18.0 Mbits/sec [ 3] 0.0-60.2 sec 138 MBytes 19.2 Mbits/sec [ 7] 0.0-60.3 sec 146 MBytes 20.3 Mbits/sec [ 6] 0.0-60.3 sec 120 MBytes 16.7 Mbits/sec [SUM] 0.0-60.3 sec 659 MBytes 91.7 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 11] 0.0-60.0 sec 65.2 MBytes 9.12 Mbits/sec [ 6] 0.0-60.0 sec 60.5 MBytes 8.46 Mbits/sec [ 9] 0.0-60.0 sec 61.4 MBytes 8.58 Mbits/sec [ 12] 0.0-60.0 sec 63.9 MBytes 8.93 Mbits/sec [ 3] 0.0-60.1 sec 62.2 MBytes 8.69 Mbits/sec [ 8] 0.0-60.2 sec 75.0 MBytes 10.5 Mbits/sec [ 10] 0.0-60.2 sec 69.1 MBytes 9.64 Mbits/sec [ 4] 0.0-60.2 sec 66.6 MBytes 9.29 Mbits/sec [ 5] 0.0-60.2 sec 55.0 MBytes 7.66 Mbits/sec [ 7] 0.0-60.3 sec 79.4 MBytes 11.0 Mbits/sec [SUM] 0.0-60.3 sec 658 MBytes 91.6 Mbits/sec }}} '''Iperf InstaGENI NYSERNet VM to ULLafayette VM (UDP) - UDP buffer size: 208 KByte (default)''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 100 Mbits/sec [ 3] Sent 512742 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 522 MBytes 72.9 Mbits/sec 11.162 ms 140126/512741 (27%) [ 3] 0.0-60.1 sec 2 datagrams received out-of-order }}} '''Ping from InstaGENI NYSERNet VM to the ULLafayette VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59047ms rtt min/avg/max/mdev = 55.044/55.197/56.054/0.308 ms }}} '''Iperf InstaGENI ULLafayette VM to NYSERNet VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-05-09'' __One Client__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 651 MBytes 90.9 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.0 sec 114 MBytes 16.0 Mbits/sec [ 4] 0.0-60.0 sec 138 MBytes 19.3 Mbits/sec [ 7] 0.0-60.0 sec 106 MBytes 14.8 Mbits/sec [ 6] 0.0-60.0 sec 136 MBytes 19.0 Mbits/sec [ 3] 0.0-60.1 sec 158 MBytes 22.0 Mbits/sec [SUM] 0.0-60.1 sec 652 MBytes 90.9 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 10] 0.0-60.0 sec 81.5 MBytes 11.4 Mbits/sec [ 6] 0.0-60.0 sec 73.4 MBytes 10.3 Mbits/sec [ 12] 0.0-60.1 sec 60.1 MBytes 8.40 Mbits/sec [ 7] 0.0-60.1 sec 72.9 MBytes 10.2 Mbits/sec [ 11] 0.0-60.1 sec 50.2 MBytes 7.01 Mbits/sec [ 9] 0.0-60.1 sec 74.1 MBytes 10.3 Mbits/sec [ 8] 0.0-60.2 sec 53.2 MBytes 7.42 Mbits/sec [ 4] 0.0-60.3 sec 66.1 MBytes 9.20 Mbits/sec [ 5] 0.0-60.3 sec 70.4 MBytes 9.79 Mbits/sec [ 3] 0.0-60.3 sec 57.2 MBytes 7.96 Mbits/sec [SUM] 0.0-60.3 sec 659 MBytes 91.6 Mbits/sec }}} '''Iperf InstaGENI ULLafayette VM to NYSERNet VM (UDP) - 208 KByte (default) {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512817 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 610 MBytes 85.3 Mbits/sec 0.130 ms 77517/512816 (15%) [ 3] 0.0-60.0 sec 4 datagrams received out-of-order }}} '''Ping from InstaGENI ULLafayette VM to NYSERNet VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59068ms rtt min/avg/max/mdev = 54.932/55.170/55.592/0.221 ms }}} == IG-CT-4 - Multiple sites !OpenFlow experiment and interoperability == Meso-scale no longer supported, see Stitching OpenFlow test IG-ST-6 status. == IG-CT-5 - Experiment Monitoring == === GENI Monitoring === Check for site's compute aggregate availability and External Checks for site aggregates: [[Image(ULLafayette-genimon-aggregate.jpeg, 80%)]] Check for status for one of the site VM Servers: [[Image(ULLafayette-genimon-status.jpeg, 80%)]] Check for status of GPO Check for Stitching: [[Image(ULLafayette-genimon-stitching.jpeg, 80%)]] == IG-CT-6 - Administrative Tests == Sent request for administrative account to site contact from the [http://groups.geni.net/geni/wiki/GeniAggregate/ULLafayetteInstaGENI ULLafayette InstaGENI] aggregate page. Followed instructions at the [http://groups.geni.net/geni/wiki/GENIRacksAdministration/InstaGENIAdministration InstaGENI Administration] page for account request. A local administrator account was requested by joining the ''emulab-ops'' group at https://www.instageni.louisiana.edu/joinproject.php3. Once the administrative account was approved and the membership to emulab-ops was granted, proceeded to execute administrative tests. {{{ LNM:~$ ssh control.instageni.louisiana.edu Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-119-generic x86_64) * Documentation: https://help.ubuntu.com/ System information as of Wed May 31 18:49:01 UTC 2017 System load: 0.03 IP address for xenbr0: 104.141.5.3 Usage of /: 25.4% of 5.65GB IP address for xenbr1: 10.1.1.254 Memory usage: 1% IP address for xenbr2: 10.2.1.254 Swap usage: 0% IP address for xenbr3: 10.3.1.254 Processes: 372 IP address for tun0: 10.8.0.1 Users logged in: 0 Graph this data and manage this system at: https://landscape.canonical.com/ New release '16.04.2 LTS' available. Run 'do-release-upgrade' to upgrade to it. The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. To run a command as administrator (user "root"), use "sudo ". See "man sudo_root" for details. lnevers@ullafayette:~$ sudo whoami root lnevers@ullafayette:~$ uname -a Linux ullafayette.control-nodes.geniracks.net 3.13.0-119-generic #166-Ubuntu SMP Wed May 3 12:18:55 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux lnevers@ullafayette:~$ }}} Also access the boss node: {{{ LNM:~$ ssh boss.instageni.louisiana.edu Last login: Mon May 22 12:43:36 2017 from ops.instageni.louisiana.edu FreeBSD 10.2-RELEASE-p22 (TESTBED-GENERIC-IB) #0: Fri Sep 30 11:18:46 MDT 2016 Welcome to FreeBSD! Ever wonder what those numbers after command names were, as in cat(1)? It's the section of the manual the man page is in. "man man" will tell you more. -- David Scheidt lnevers@boss:~ % sudo whoami root lnevers@boss:~ % uname -a FreeBSD boss.instageni.louisiana.edu 10.2-RELEASE-p22 FreeBSD 10.2-RELEASE-p22 #0: Fri Sep 30 11:18:46 MDT 2016 root@node.freebsd102-64.emulab-ops.emulab.net:/usr/obj/usr/src/sys/TESTBED-GENERIC-IB amd64 lnevers@boss:~ % }}} From boss node accessed each of the experiment nodes that support VMs: {{{ [lnevers@boss ~]$ for i in pc1 pc2 pc3; do ssh $i "echo -n '===> Host: ';hostname;sudo whoami;uname -a;echo"; done Warning: Permanently added 'pc1.instageni.louisiana.edu' (RSA) to the list of known hosts. ===> Host: vhost1.shared-nodes.emulab-ops.instageni.louisiana.edu root Linux vhost1.shared-nodes.emulab-ops.instageni.louisiana.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc2.instageni.louisiana.edu' (RSA) to the list of known hosts. ===> Host: vhost2.shared-nodes.emulab-ops.instageni.louisiana.edu root Linux vhost2.shared-nodes.emulab-ops.instageni.louisiana.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux Warning: Permanently added 'pc3.instageni.louisiana.edu' (RSA) to the list of known hosts. ===> Host: vhost3.shared-nodes.emulab-ops.instageni.louisiana.edu root Linux vhost3.shared-nodes.emulab-ops.instageni.louisiana.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux [lnevers@boss ~]$ }}} In order to access Dedicated Nodes some experiment must be running on the raw-pc device. At the time of this capture two raw-pc nodes were in use (pc4 and pc5): {{{ [lnevers@boss ~]$ for i in pc4 pc5 ; do sudo ssh $i "echo -n '===> Host: ';hostname;whoami;uname -a;echo"; done ===> Host: pc.2pc.ch-geni-net.instageni.louisiana.edu root Linux pc.2pc.ch-geni-net.instageni.louisiana.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux ===> Host: pc2.2pc.ch-geni-net.instageni.louisiana.edu root Linux pc2.2pc.ch-geni-net.instageni.louisiana.edu 4.4.0-45-generic #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux [lnevers@boss ~]$ }}} Further verified access by ssh from ops.instageni.louisiana.edu to boss.instageni.louisiana.edu, which is usually restricted for non-admin users: {{{ LNM:~$ ssh ops.instageni.louisiana.edu Last login: Mon May 22 12:43:31 2017 from 128.89.73.1 FreeBSD 10.2-RELEASE-p22 (TESTBED-GENERIC-IB) #0: Fri Sep 30 11:18:46 MDT 2016 Welcome to FreeBSD! Want colour in your directory listings? Use "ls -G". "ls -F" is also useful, and they can be combined as "ls -FG". lnevers@ops:~ % ssh boss Last login: Wed May 31 15:16:13 2017 from 128.89.73.1 FreeBSD 10.2-RELEASE-p22 (TESTBED-GENERIC-IB) #0: Fri Sep 30 11:18:46 MDT 2016 Welcome to FreeBSD! In order to search for a string in some files, use 'grep' like this: grep "string" filename1 [filename2 filename3 ...] This will print out the lines in the files that contain the string. grep can also do a lot more advanced searches - type 'man grep' for details. lnevers@boss:~ % }}} Access infrastructure switches using documented password. First connect to the switch named procurve1 the control network switch: {{{ [lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd XXXXXXXXX [lnevers@boss ~]$ sudo ssh procurve1 We'd like to keep you up to date about: * Software feature updates * New product announcements * Special events Please register your products now at: www.hpe.com/networking/register Aruba JL071A 3810M-24G-1-slot Switch Software revision KB.16.01.0004 Copyright (C) 2016 Aruba, a Hewlett Packard Enterprise company. RESTRICTED RIGHTS LEGEND Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Press any key to continue Aruba-3810M-24G-1-slot# Aruba-3810M-24G-1-slot# show version Image stamp: /ws/swbuildm/rel_richmond_qaoff/code/build/bom(swbuildm_rel_richmond_qaoff_rel_ richmond) Jan 17 2016 15:59:54 KB.16.01.0004 215 Boot Image: Primary Boot ROM Version: KB.16.01.0005 Active Boot ROM: Primary Aruba-3810M-24G-1-slot# show vlan Status and Counters - VLAN Information Maximum VLANs to support : 256 Primary VLAN : DEFAULT_VLAN Management VLAN : control-hardware VLAN ID Name | Status Voice Jumbo ------- -------------------------------- + ---------- ----- ----- 1 DEFAULT_VLAN | Port-based No No 10 control-hardware | Port-based No No 11 control-alternate | Port-based No No Aruba-3810M-24G-1-slot# sho interfaces brief Status and Counters - Port Status | Intrusion MDI Flow Bcast Port Type | Alert Enabled Status Mode Mode Ctrl Limit ------------ ---------- + --------- ------- ------ ---------- ---- ---- ----- 1 100/1000T | No Yes Up 1000FDx MDIX off 0 2 100/1000T | No Yes Up 1000FDx MDI off 0 3 100/1000T | No Yes Up 1000FDx MDI off 0 4 100/1000T | No Yes Up 1000FDx MDI off 0 5 100/1000T | No Yes Up 1000FDx MDIX off 0 6 100/1000T | No Yes Up 1000FDx MDI off 0 7 100/1000T | No Yes Up 1000FDx MDI off 0 8 100/1000T | No Yes Up 1000FDx MDIX off 0 9 100/1000T | No Yes Up 1000FDx MDI off 0 10 100/1000T | No Yes Up 1000FDx MDI off 0 11 100/1000T | No Yes Down 1000FDx Auto off 0 12 100/1000T | No Yes Down 1000FDx Auto off 0 13 100/1000T | No Yes Down 1000FDx Auto off 0 14 100/1000T | No Yes Down 1000FDx NA off 0 15 100/1000T | No Yes Down 1000FDx Auto off 0 16 100/1000T | No Yes Down 1000FDx Auto off 0 17 100/1000T | No Yes Up 1000FDx MDI off 0 18 100/1000T | No Yes Up 1000FDx MDI off 0 19 100/1000T | No Yes Up 1000FDx MDI off 0 20 100/1000T | No Yes Up 1000FDx MDI off 0 21 100/1000T | No Yes Down 1000FDx Auto off 0 22 100/1000T | No Yes Down 1000FDx Auto off 0 23 100/1000T | No Yes Down 1000FDx Auto off 0 24 100/1000T | No Yes Up 1000FDx MDIX off 0 A1 | No Yes Down . off 0 A2 | No Yes Down . off 0 A3 | No Yes Down . off 0 A4 | No Yes Down . off 0 Aruba-3810M-24G-1-slot# show running-config Running configuration: ; JL071A Configuration Editor; Created on release #KB.16.01.0004 ; Ver #0c:01.7c.59.f4.7b.ff.ff.fc.ff.ff.3f.ef: hostname "Aruba-3810M-24G-1-slot" module 1 type jl071x flexible-module A type JL083A telnet-server listen data no web-management web-management listen data ip default-gateway 10.1.1.254 ip ssh listen data snmp-server community "xxx" unrestricted snmp-server listen data aaa authentication ssh login public-key aaa authentication ssh enable public-key oobm disable ip address dhcp-bootp exit vlan 1 name "DEFAULT_VLAN" no untagged 18-19 untagged 1-17,20-24,A1-A4 ip address 10.254.254.253 255.255.255.0 ip igmp exit vlan 10 name "control-hardware" untagged 18 ip address 10.1.1.253 255.255.255.0 exit vlan 11 name "control-alternate" untagged 19 ip address 10.2.1.253 255.255.255.0 exit management-vlan 10 no tftp server tftp server listen data no autorun no dhcp config-file-update no dhcp image-file-update password xx password xxx Aruba-3810M-24G-1-slot# }}} Connect to the switch named procurve2 the dataplane network switch via ssh using the documented password: {{{ [lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd xxxxxxx [lnevers@boss ~]$ sudo ssh procurve2 We'd like to keep you up to date about: * Software feature updates * New product announcements * Special events Please register your products now at: www.hpe.com/networking/register manager@10.3.1.253's password: HP J9850A Switch 5406Rzl2 Software revision KB.16.02.0018 (C) Copyright 2017 Hewlett Packard Enterprise Development LP RESTRICTED RIGHTS LEGEND Confidential computer software. Valid license from Hewlett Packard Enterprise Development LP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Press any key to continue HP 5406R# show version Management Module 1: Active Image stamp: /ws/swbuildm/rel_spokane_qaoff/code/build/bom(swbuildm_rel_spokane_qaoff_rel_sp okane) Mar 30 2017 09:10:47 KB.16.02.0018 526 Boot Image: Primary Boot ROM Version: KB.16.01.0006 Active Boot ROM: Primary HP 5406R# show vlan Status and Counters - VLAN Information Maximum VLANs to support : 256 Primary VLAN : DEFAULT_VLAN Management VLAN : control-hardware VLAN ID Name | Status Voice Jumbo ------- -------------------------------- + ---------- ----- ----- 1 DEFAULT_VLAN | Port-based No No 10 control-hardware | Port-based No No 257 5008 | Port-based No No 258 5154 | Port-based No No 3995 5023 | Port-based No No HP 5406R# show interfaces brief Status and Counters - Port Status | Intrusion MDI Flow Bcast Port Type | Alert Enabled Status Mode Mode Ctrl Limit ------------ ---------- + --------- ------- ------ ---------- ---- ---- ----- A1 100/1000T | No Yes Up 1000FDx MDI off 0 A2 100/1000T | No Yes Up 1000FDx MDIX off 0 A3 100/1000T | No Yes Up 1000FDx MDIX off 0 A4 100/1000T | No Yes Up 1000FDx MDIX off 0 A5 100/1000T | No Yes Up 1000FDx MDIX off 0 A6 100/1000T | No Yes Up 1000FDx MDIX off 0 A7 100/1000T | No Yes Up 1000FDx MDIX off 0 A8 100/1000T | No Yes Up 1000FDx MDIX off 0 A9 100/1000T | No Yes Up 1000FDx MDIX off 0 A10 100/1000T | No Yes Up 1000FDx MDIX off 0 A11 100/1000T | No Yes Up 1000FDx MDI off 0 A12 100/1000T | No Yes Up 1000FDx MDI off 0 A13 100/1000T | No Yes Up 1000FDx MDI off 0 A14 100/1000T | No Yes Up 1000FDx MDI off 0 A15 100/1000T | No Yes Up 1000FDx MDI off 0 A16 100/1000T | No Yes Down 1000FDx Auto off 0 A17 100/1000T | No Yes Down 1000FDx Auto off 0 A18 100/1000T | No Yes Down 1000FDx Auto off 0 A19 100/1000T | No Yes Down 1000FDx Auto off 0 A20 100/1000T | No Yes Up 1000FDx MDI off 0 A21 SFP+LR | No Yes Up 10GigFD NA off 0 A22 | No Yes Down . off 0 A23 | No Yes Down . off 0 A24 | No Yes Down . off 0 B1 10GbE-T | No Yes Up 1000FDx MDIX off 0 B2 10GbE-T | No Yes Up 1000FDx MDIX off 0 B3 10GbE-T | No Yes Up 1000FDx MDI off 0 B4 10GbE-T | No Yes Up 1000FDx MDI off 0 B5 10GbE-T | No Yes Up 1000FDx MDIX off 0 B6 10GbE-T | No Yes Down 10GigFD Auto off 0 B7 10GbE-T | No Yes Down 10GigFD Auto off 0 B8 10GbE-T | No Yes Up 1000FDx MDI off 0 HP 5406R# show running-config Running configuration: ; J9850A Configuration Editor; Created on release #KB.16.02.0018 ; Ver #10:08.01.81.b3.ff.7c.59.fc.7b.ff.ff.fc.ff.ff.3f.ef:5a hostname "HP 5406R" module A type j9990a module B type j9995a telnet-server listen data no web-management web-management listen data ip default-gateway 10.3.1.7 ip ssh listen data interface A1 speed-duplex auto-1000 exit interface A2 speed-duplex auto-1000 exit interface A3 speed-duplex auto-1000 exit interface A4 speed-duplex auto-1000 exit interface A5 speed-duplex auto-1000 exit interface A6 speed-duplex auto-1000 exit interface A7 speed-duplex auto-1000 exit interface A8 speed-duplex auto-1000 exit interface A9 speed-duplex auto-1000 exit interface A10 speed-duplex auto-1000 exit interface A13 speed-duplex auto-1000 exit snmp-server community "xxx" unrestricted snmp-server listen data openflow enable exit oobm disable ip address dhcp-bootp exit vlan 1 name "DEFAULT_VLAN" no untagged A1-A10,A13,A20-A21 untagged A11-A12,A14-A19,A22-A24,B1-B8 no ip address forbid A1-A9 exit vlan 10 name "control-hardware" untagged A20 ip address 10.3.1.253 255.255.255.0 exit vlan 257 name "5008" untagged A1-A9 no ip address exit vlan 258 name "5154" untagged A10,A13 no ip address exit vlan 3995 name "5023" tagged A4,A21 no ip address exit management-vlan 10 no tftp server tftp server listen data no autorun no dhcp config-file-update no dhcp image-file-update device-profile name "default-ap-profile" cos 0 exit no allow-v2-modules activate provision disable password xxx password xxx HP 5406R# ping 172.217.7.228 172.217.7.228 is alive, time = 48 ms HP 5406R# }}} Access the FlowVisor VM and gather version information: {{{ LNM:~$ ssh flowvisor.instageni.louisiana.edu Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-116-generic x86_64) * Documentation: https://help.ubuntu.com/ New release '16.04.2 LTS' available. Run 'do-release-upgrade' to upgrade to it. The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. lnevers@SDNnat:~$ sudo whoami root lnevers@SDNnat:~$ uname -a Linux SDNnat 3.13.0-116-generic #163-Ubuntu SMP Fri Mar 31 14:13:22 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux lnevers@SDNnat:~$ }}} == IG-ST-1 New Site to GPO IG topology == The ULLafayette site advertises the following stitching details: {{{ protogeni chainANDTree false false 2017-05-09T13:24:24Z 2017-05-09T13:24:24Z 10000000 10000000 1000 1 urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.bato.net.internet2.edu:et-8/0/0.0:ullafayette-ig 10 10000000 10000000 1000 1 l2sc ethernet 1500 3980-3986,3988-3994,3996-3999 false }}} Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested. Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/ULLafayette/IG-ST-1.rspec IG-ST-1.rspec]: {{{ $ stitcher.py createsliver IG-ST-1 IG-ST-1.rspec -o 09:04:29 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 09:04:29 INFO : Reading slice IG-ST-1 credential... 09:04:29 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2017-06-26 13:04:18 UTC 09:04:29 INFO : Calling SCS... 09:04:35 INFO : Multi-AM reservation will include resources from these aggregates: 09:04:35 INFO : 09:04:35 INFO : 09:04:35 INFO : 09:04:35 INFO : Stitcher doing createsliver at ... 09:04:54 INFO : ... Allocation at complete. 09:04:54 INFO : Stitcher doing createsliver at ... 09:05:15 INFO : ... Allocation at complete. 09:05:15 INFO : Stitcher doing createsliver at ... 09:05:23 INFO : ... Allocation at complete. 09:05:23 INFO : All aggregates are complete. 09:05:23 INFO : Your resources expire at 2017-06-25T12:54:35 (UTC). 09:05:23 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-ST-1-manifest-rspec-multiam-combined.xml' }}} Determined login information at each ULLafayette and GPO aggregate: {{{ $ readyToLogin.py IG-ST-1a --useSliceAggregates .... ig-ulla's geni_status is: ready User lnevers logs in to ig-ulla using: ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.louisiana.edu ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 25042 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com }}} ....NO IP CONNECTIVITY....05/09, 05/26 === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI ULLafayette VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-06-19'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 575 MBytes 80.3 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 153 MBytes 21.3 Mbits/sec [ 4] 0.0-60.1 sec 133 MBytes 18.5 Mbits/sec [ 5] 0.0-60.1 sec 131 MBytes 18.3 Mbits/sec [ 7] 0.0-60.1 sec 129 MBytes 18.0 Mbits/sec [ 6] 0.0-60.1 sec 119 MBytes 16.5 Mbits/sec [SUM] 0.0-60.1 sec 664 MBytes 92.6 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 8] 0.0-60.0 sec 72.2 MBytes 10.1 Mbits/sec [ 10] 0.0-60.0 sec 68.5 MBytes 9.57 Mbits/sec [ 12] 0.0-60.1 sec 69.0 MBytes 9.64 Mbits/sec [ 4] 0.0-60.1 sec 64.8 MBytes 9.04 Mbits/sec [ 3] 0.0-60.2 sec 61.4 MBytes 8.55 Mbits/sec [ 9] 0.0-60.2 sec 62.0 MBytes 8.64 Mbits/sec [ 5] 0.0-60.2 sec 66.0 MBytes 9.19 Mbits/sec [ 6] 0.0-60.3 sec 63.4 MBytes 8.82 Mbits/sec [ 11] 0.0-60.3 sec 78.5 MBytes 10.9 Mbits/sec [ 7] 0.0-60.3 sec 67.1 MBytes 9.34 Mbits/sec [SUM] 0.0-60.3 sec 673 MBytes 93.7 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI ULLafayette VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512816 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 691 MBytes 96.5 Mbits/sec 0.023 ms 20228/512815 (3.9%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to the InstaGENI ULLafayette VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59076ms rtt min/avg/max/mdev = 47.994/48.246/50.873/0.470 ms }}} '''Iperf InstaGENI ULLafayette VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-06-19'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 598 MBytes 83.4 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.0 sec 110 MBytes 15.4 Mbits/sec [ 3] 0.0-60.1 sec 93.1 MBytes 13.0 Mbits/sec [ 6] 0.0-60.1 sec 269 MBytes 37.6 Mbits/sec [ 4] 0.0-60.1 sec 118 MBytes 16.4 Mbits/sec [ 7] 0.0-60.2 sec 84.5 MBytes 11.8 Mbits/sec [SUM] 0.0-60.2 sec 674 MBytes 94.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 10] 0.0-60.0 sec 70.6 MBytes 9.87 Mbits/sec [ 5] 0.0-60.0 sec 71.5 MBytes 9.99 Mbits/sec [ 7] 0.0-60.0 sec 71.8 MBytes 10.0 Mbits/sec [ 4] 0.0-60.0 sec 59.6 MBytes 8.33 Mbits/sec [ 9] 0.0-60.1 sec 71.2 MBytes 9.94 Mbits/sec [ 11] 0.0-60.1 sec 59.2 MBytes 8.27 Mbits/sec [ 3] 0.0-60.2 sec 70.2 MBytes 9.79 Mbits/sec [ 12] 0.0-60.2 sec 64.4 MBytes 8.97 Mbits/sec [ 6] 0.0-60.2 sec 75.8 MBytes 10.5 Mbits/sec [ 8] 0.0-60.3 sec 61.6 MBytes 8.58 Mbits/sec [SUM] 0.0-60.3 sec 676 MBytes 94.1 Mbits/sec }}} '''Iperf InstaGENI ULLafayette VM to GPO InstaGENI VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512816 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 692 MBytes 96.7 Mbits/sec 0.016 ms 19538/512815 (3.8%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI ULLafayette VM to GPO InstaGENI VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59072ms rtt min/avg/max/mdev = 48.045/48.161/48.595/0.243 ms }}} == IG-ST-2 New Site to GPO IG Loop topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/ULLafayette/IG-ST-2.rspec IG-ST-2.rspec]: {{{ $ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o 09:44:34 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2017-06-26 13:44:33 UTC 09:44:34 INFO : Calling SCS... 09:44:35 INFO : Multi-AM reservation will include resources from these aggregates: 09:44:35 INFO : 09:44:35 INFO : 09:44:35 INFO : 09:44:35 INFO : Stitcher doing createsliver at ... 09:44:58 INFO : ... Allocation at complete. 09:44:58 INFO : Stitcher doing createsliver at ... 09:45:18 INFO : ... Allocation at complete. 09:45:18 INFO : Stitcher doing createsliver at ... 09:45:32 INFO : ... Allocation at complete. 09:45:32 INFO : All aggregates are complete. 09:45:32 INFO : Your resources expire at 2017-06-25T13:34:35 (UTC). 09:45:32 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-ST-2-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information at each ULLafayette and GPO aggregate: {{{ $ readyToLogin.py IG-ST-2 --useSliceAggregates .... ig-ulla's geni_status is: ready User lnevers logs in to ig-ulla using: ssh -p 25042 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.louisiana.edu ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 25298 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com }}} Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site: {{{ $ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q" 1. Find login Info for hosts in slice IG-ST-2x 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo 2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data. --- 10.10.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59067ms rtt min/avg/max/mdev = 47.992/48.893/96.224/6.167 ms PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data. --- 192.168.4.2 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59014ms rtt min/avg/max/mdev = 47.930/49.009/96.294/6.182 ms ... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo }}} == IG-ST-3 IG-ST-3 New Site 3 node linear topology == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/ULLafayette/IG-ST-3.rspec IG-ST-3.rspec]: {{{ $ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o 09:50:14 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 09:50:14 INFO : Reading slice IG-ST-3 credential... 09:50:14 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2017-06-26 13:50:14 UTC 09:50:14 INFO : Calling SCS... 09:50:17 INFO : Multi-AM reservation will include resources from these aggregates: 09:50:17 INFO : 09:50:17 INFO : 09:50:17 INFO : 09:50:17 INFO : 09:50:17 INFO : Stitcher doing createsliver at ... 09:50:40 INFO : ... Allocation at complete. 09:50:40 INFO : Stitcher doing createsliver at ... 09:51:00 ERROR : {'output': "*** SetNodeHistory: No control interface for [Node: interconnect-poblanovm-6]\n*** WARNING: mapper:\n*** DB Query failed:\n*** Query: insert into interface_state set node_id='pcvm5-2', card=0, port=1, iface='eth0'\n*** Error: Duplicate entry 'pcvm5-2-0-1' for key 1 (1062)\n*** CreateVnodes: Could not create interface for pcvm5-2\n*** ERROR: mapper: Could not allocate vnodes on pc5\n*** ERROR: mapper: Could not allocate virtual nodes\n*** ERROR: mapper: Unretriable error. Giving up.\n*** ERROR: mapper: 1 warnings.\n", 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+ccacc0d7bf93f99e64c104504c2e8e1f', 'am_type': 'protogeni', 'geni_code': 2, 'am_code': 28, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=ccacc0d7bf93f99e64c104504c2e8e1f'}, 'value': 'Could not map to resources'} 09:51:00 WARNING : Stitching failed but will retry: Circuit reservation failed at (AMAPIError: Error from Aggregate: code 2. protogeni AM code: 28: *** SetNodeHistory: No control interface for [Node: interconnect-poblanovm-6] *** WARNING: mapper: *** DB Query failed: *** Query: insert into interface_state set node_id='pcvm5-2', card=0, port=1, iface='eth0' *** Error: Duplicate entry 'pcvm5-2-0-1' for key 1 (1062) *** CreateVnodes: Could not create interface for pcvm5-2 *** ERROR: mapper: Could not allocate vnodes on pc5 *** ERROR: mapper: Could not allocate virtual nodes *** ERROR: mapper: Unretriable error. Giving up. *** ERROR: mapper: 1 warnings. .). Try again from the SCS 09:51:00 INFO : Deleting existing reservations... 09:51:00 INFO : Doing deletesliver at ... 09:51:03 INFO : Deleted reservation at . 09:51:03 INFO : Calling SCS for the 2nd time... 09:51:03 INFO : Pausing for 30 seconds for Aggregates to free up resources... 09:51:33 INFO : Multi-AM reservation will include resources from these aggregates: 09:51:33 INFO : 09:51:33 INFO : 09:51:33 INFO : 09:51:33 INFO : 09:51:33 INFO : Stitcher doing createsliver at ... 09:51:56 INFO : ... Allocation at complete. 09:51:56 INFO : Stitcher doing createsliver at ... 09:52:14 INFO : ... Allocation at complete. 09:52:14 INFO : Stitcher doing createsliver at ... 09:52:37 INFO : ... Allocation at complete. 09:52:37 INFO : Stitcher doing createsliver at ... 09:52:45 ERROR : {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3718', 'code': {'geni_code': 24}} 09:52:45 INFO : Deleting some reservations to retry, avoiding failed VLAN... 09:52:45 INFO : Doing deletesliver at ... 09:54:16 ERROR : {'output': 'start/restart in progress; try again later', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+ccf919fcca89cc6691f88b1c203d0c17', 'am_type': 'protogeni', 'geni_code': 14, 'am_code': 14, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=ccf919fcca89cc6691f88b1c203d0c17'}, 'value': 0} 09:54:26 INFO : ... aggregate was busy, will retry ... 09:55:11 INFO : ... done. 09:55:11 INFO : Will put back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at .... 09:55:11 INFO : Pausing for 30 seconds for Aggregates to free up resources... 09:55:41 INFO : Checking that prior reservation at has been cleared up.... 09:55:43 ERROR : {'output': 'No slice or aggregate here', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+3587969c16fb07f29dc1b83303e49170', 'am_type': 'protogeni', 'geni_code': 12, 'am_code': 12, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=3587969c16fb07f29dc1b83303e49170'}, 'value': 0} 09:55:43 INFO : ... it is, so can try a new reservation. 09:55:43 INFO : Stitcher doing createsliver at ... 09:56:23 INFO : ... Allocation at complete. 09:56:23 INFO : Stitcher doing createsliver at ... 09:56:37 INFO : ... Allocation at complete. 09:56:37 INFO : All aggregates are complete. 09:56:37 INFO : Your resources expire at 2017-06-25T13:41:33 (UTC). 09:56:37 INFO : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-ST-3-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s). }}} Determined login information the ULLafayette host: {{{ $ readyToLogin.py IG-ST-3 --useSliceAggregates .... ig-ulla's geni_status is: ready User lnevers logs in to ig-ulla using: ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.louisiana.edu ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 25042 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com ig-wash's geni_status is: ready User lnevers logs in to ig-wash using: ssh -p 25074 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.washington.edu }}} Login to the ULLafayette host and ping each remote: {{{ #ping GPO IG lnevers@ig-ulla:~$ ping 192.168.2.1 -c 60 -q PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59071ms rtt min/avg/max/mdev = 48.002/48.935/96.357/6.176 ms lnevers@ig-ulla:~$ # Washington IG lnevers@ig-ulla:~$ ping 192.168.4.1 -c 60 -q PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data. --- 192.168.4.1 ping statistics --- 60 packets transmitted, 60 received, 0% packet loss, time 59098ms rtt min/avg/max/mdev = 67.794/69.061/135.858/8.703 ms lnevers@ig-ulla:~$ }}} == IG-ST-4 New Site to GPO EG interoperability == Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/ULLafayette/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. Note "--defaultCapacity=100000" was used to get around the ExoGENI bug where request fails if no link speed is specified. {{{ $ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o --defaultCapacity=100000 10:06:48 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 10:06:48 INFO : Reading slice IG-ST-4 credential... 10:06:48 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2017-06-26 14:06:47 UTC 10:06:48 INFO : Calling SCS... 10:06:49 INFO : Multi-AM reservation will include resources from these aggregates: 10:06:49 INFO : 10:06:49 INFO : 10:06:49 INFO : 10:06:49 INFO : Stitcher doing createsliver at ... 10:07:11 INFO : ... Allocation at complete. 10:07:11 INFO : Stitcher doing createsliver at ... 10:07:21 INFO : ... Allocation at complete. 10:07:21 INFO : Stitcher doing createsliver at ... 10:07:29 INFO : ... Allocation at complete. 10:07:29 INFO : All aggregates are complete. 10:07:29 INFO : Your resources expire at 2017-06-25T13:56:49 (UTC). 10:07:29 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-ST-4-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-4 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each ULLafayette and GPO aggregate: {{{ $ readyToLogin.py IG-ST-4 --useSliceAggregates eg-gpo's geni_status is: ready User lnevers logs in to eg-gpo using: ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.9 ig-ulla's geni_status is: ready User lnevers logs in to ig-ulla using: ssh -p 25042 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.louisiana.edu }}} === Measurements === '''Iperf ExoGENI GPO VM to InstaGENI ULLafayette VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-06-19'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 498 MBytes 69.7 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 125 MBytes 17.5 Mbits/sec [ 4] 0.0-60.0 sec 141 MBytes 19.7 Mbits/sec [ 5] 0.0-60.1 sec 147 MBytes 20.6 Mbits/sec [ 3] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec [ 6] 0.0-60.2 sec 132 MBytes 18.4 Mbits/sec [SUM] 0.0-60.2 sec 685 MBytes 95.5 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 10] 0.0-60.0 sec 68.2 MBytes 9.54 Mbits/sec [ 6] 0.0-60.0 sec 78.2 MBytes 10.9 Mbits/sec [ 5] 0.0-60.0 sec 75.2 MBytes 10.5 Mbits/sec [ 7] 0.0-60.1 sec 72.4 MBytes 10.1 Mbits/sec [ 8] 0.0-60.1 sec 69.1 MBytes 9.65 Mbits/sec [ 9] 0.0-60.2 sec 61.9 MBytes 8.63 Mbits/sec [ 3] 0.0-60.2 sec 65.6 MBytes 9.15 Mbits/sec [ 12] 0.0-60.2 sec 73.0 MBytes 10.2 Mbits/sec [ 4] 0.0-60.2 sec 65.2 MBytes 9.09 Mbits/sec [ 11] 0.0-60.4 sec 58.9 MBytes 8.17 Mbits/sec [SUM] 0.0-60.4 sec 688 MBytes 95.5 Mbits/sec }}} '''Iperf ExoGENI GPO VM to InstaGENI ULLafayette VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512821 datagrams [ 3] Server Report: [ 3] 0.0-60.1 sec 696 MBytes 97.1 Mbits/sec 0.010 ms 16333/512820 (3.2%) [ 3] 0.0-60.1 sec 1 datagrams received out-of-order }}} '''Ping from ExoGENI GPO VM to the InstaGENI ULLafayette VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59071ms rtt min/avg/max/mdev = 47.893/48.095/50.512/0.427 ms }}} '''Iperf InstaGENI ULLafayette VM to ExoGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-06-19'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 412 MBytes 57.4 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 90.5 MBytes 12.7 Mbits/sec [ 3] 0.0-60.0 sec 96.8 MBytes 13.5 Mbits/sec [ 6] 0.0-60.1 sec 133 MBytes 18.6 Mbits/sec [ 5] 0.0-60.1 sec 98.1 MBytes 13.7 Mbits/sec [ 4] 0.0-60.8 sec 227 MBytes 31.4 Mbits/sec [SUM] 0.0-60.8 sec 646 MBytes 89.1 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-60.0 sec 65.8 MBytes 9.19 Mbits/sec [ 6] 0.0-60.1 sec 65.2 MBytes 9.11 Mbits/sec [ 10] 0.0-60.1 sec 60.5 MBytes 8.45 Mbits/sec [ 5] 0.0-60.1 sec 66.8 MBytes 9.32 Mbits/sec [ 8] 0.0-60.1 sec 66.0 MBytes 9.21 Mbits/sec [ 12] 0.0-60.1 sec 72.9 MBytes 10.2 Mbits/sec [ 3] 0.0-60.1 sec 74.8 MBytes 10.4 Mbits/sec [ 9] 0.0-60.2 sec 65.4 MBytes 9.11 Mbits/sec [ 4] 0.0-60.3 sec 83.4 MBytes 11.6 Mbits/sec [ 11] 0.0-60.3 sec 52.9 MBytes 7.35 Mbits/sec [SUM] 0.0-60.3 sec 674 MBytes 93.7 Mbits/sec }}} '''Iperf InstaGENI ULLafayette VM to ExoGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512813 datagrams [ 3] Server Report: [ 3] 0.0-60.0 sec 691 MBytes 96.6 Mbits/sec 0.019 ms 19774/512812 (3.9%) [ 3] 0.0-60.0 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI ULLafayette VM to ExoGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59072ms rtt min/avg/max/mdev = 47.922/48.187/50.663/0.593 ms }}} == IG-ST-5 Site Information == Various pages include stitching information for a site. Each of the following were verified for this site: 1. To be Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/ULLafayetteInstaGENI#GENINetworkStitching ULLafayette Aggregate] page. 2. To beVerified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs]. 3. ~~Stitching Computation Service logs reviewed.~~ No longer possible 4. To be Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. == IG-ST-6 New Site !OpenFlow topology == Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/ULLafayette/IG-ST-6.rspec IG-ST-6.rspec]: {{{ $ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o 15:34:38 INFO : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf 15:34:38 INFO : Reading slice IG-ST-6 credential... 15:34:38 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2017-06-26 19:34:37 UTC 15:34:38 INFO : Calling SCS... 15:34:39 INFO : Multi-AM reservation will include resources from these aggregates: 15:34:39 INFO : 15:34:39 INFO : 15:34:39 INFO : 15:34:39 INFO : Stitcher doing createsliver at ... 15:35:01 INFO : ... Allocation at complete. 15:35:02 INFO : Stitcher doing createsliver at ... 15:35:18 INFO : ... Allocation at complete. 15:35:18 INFO : Stitcher doing createsliver at ... 15:35:21 ERROR : {'output': 'Exception: requested VLAN unavailable: rtsw.newy32aoa.net.internet2.edu,et-7/3/0.0 VLAN=3731', 'code': {'geni_code': 24}} 15:35:21 INFO : Deleting some reservations to retry, avoiding failed VLAN... 15:35:21 INFO : Doing deletesliver at ... 15:36:28 INFO : Will put back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at .... 15:36:28 INFO : Pausing for 30 seconds for Aggregates to free up resources... 15:36:58 INFO : Checking that prior reservation at has been cleared up.... 15:37:46 ERROR : {'output': 'No slice or aggregate here', 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+d4e842cf9d3ca184364d5f6b6d4888fa', 'am_type': 'protogeni', 'geni_code': 12, 'am_code': 12, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=d4e842cf9d3ca184364d5f6b6d4888fa'}, 'value': 0} 15:37:46 INFO : ... it is, so can try a new reservation. 15:37:46 INFO : Stitcher doing createsliver at ... 15:38:06 INFO : ... Allocation at complete. 15:38:06 INFO : Stitcher doing createsliver at ... 15:38:14 INFO : ... Allocation at complete. 15:38:14 INFO : All aggregates are complete. 15:38:14 INFO : Your resources expire at 2017-06-25T19:24:39 (UTC). 15:38:14 INFO : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/instarspec/ULLafayette/IG-ST-6-manifest-rspec-multiam-combined.xml' Success: Reserved resources in slice IG-ST-6 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s). }}} Determined login information at each ULLafayette and GATech aggregate: {{{ $ readyToLogin.py IG-ST-6 --useSliceAggregates ig-ulla's geni_status is: ready User lnevers logs in to ig-ulla using: ssh -p 25010 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.louisiana.edu ig-gpo's geni_status is: ready User lnevers logs in to ig-gpo using: ssh -p 25042 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com }}} === Measurements === '''Iperf InstaGENI GPO VM to InstaGENI ULLafayette VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-06-19'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 138 MBytes 19.3 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.2 sec 30.4 MBytes 4.23 Mbits/sec [ 6] 0.0-60.4 sec 26.9 MBytes 3.73 Mbits/sec [ 4] 0.0-60.5 sec 25.4 MBytes 3.52 Mbits/sec [ 7] 0.0-60.5 sec 29.1 MBytes 4.04 Mbits/sec [ 5] 0.0-60.6 sec 25.6 MBytes 3.55 Mbits/sec [SUM] 0.0-60.6 sec 137 MBytes 19.0 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 7] 0.0-59.4 sec 16.6 MBytes 2.35 Mbits/sec [ 9] 0.0-59.7 sec 13.2 MBytes 1.86 Mbits/sec [ 4] 0.0-59.7 sec 13.6 MBytes 1.91 Mbits/sec [ 8] 0.0-59.7 sec 13.8 MBytes 1.93 Mbits/sec [ 12] 0.0-60.1 sec 11.8 MBytes 1.64 Mbits/sec [ 3] 0.0-60.2 sec 12.6 MBytes 1.76 Mbits/sec [ 6] 0.0-60.2 sec 13.6 MBytes 1.90 Mbits/sec [ 5] 0.0-60.4 sec 16.5 MBytes 2.29 Mbits/sec [ 10] 0.0-60.6 sec 13.2 MBytes 1.83 Mbits/sec [ 11] 0.0-60.6 sec 13.9 MBytes 1.92 Mbits/sec [SUM] 0.0-60.6 sec 139 MBytes 19.2 Mbits/sec }}} '''Iperf InstaGENI GPO VM to InstaGENI ULLafayette VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512816 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 13.869 ms 413578/512815 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI GPO VM to InstaGENI ULLafayette VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59069ms rtt min/avg/max/mdev = 47.958/48.088/48.328/0.162 ms }}} '''Iperf InstaGENI ULLafayette VM to InstaGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)''' ''Collected: 2017-06-19'' __One Client_ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 137 MBytes 19.2 Mbits/sec }}} __Five Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.1 sec 27.6 MBytes 3.86 Mbits/sec [ 6] 0.0-60.2 sec 27.4 MBytes 3.82 Mbits/sec [ 4] 0.0-60.2 sec 29.1 MBytes 4.06 Mbits/sec [ 5] 0.0-60.4 sec 27.5 MBytes 3.82 Mbits/sec [ 7] 0.0-60.6 sec 27.2 MBytes 3.77 Mbits/sec [SUM] 0.0-60.6 sec 139 MBytes 19.2 Mbits/sec }}} __Ten Clients__ {{{ [ ID] Interval Transfer Bandwidth [ 5] 0.0-60.5 sec 14.6 MBytes 2.03 Mbits/sec [ 3] 0.0-60.6 sec 16.8 MBytes 2.32 Mbits/sec [ 12] 0.0-60.8 sec 12.8 MBytes 1.76 Mbits/sec [ 4] 0.0-60.8 sec 13.6 MBytes 1.88 Mbits/sec [ 6] 0.0-60.9 sec 13.6 MBytes 1.88 Mbits/sec [ 10] 0.0-61.0 sec 12.2 MBytes 1.69 Mbits/sec [ 7] 0.0-61.0 sec 14.9 MBytes 2.05 Mbits/sec [ 9] 0.0-61.0 sec 13.8 MBytes 1.89 Mbits/sec [ 11] 0.0-61.0 sec 14.4 MBytes 1.98 Mbits/sec [ 8] 0.0-61.0 sec 12.9 MBytes 1.77 Mbits/sec [SUM] 0.0-61.0 sec 140 MBytes 19.2 Mbits/sec }}} '''Iperf InstaGENI ULLafayette VM to InstaGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default) ''' {{{ [ ID] Interval Transfer Bandwidth [ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec [ 3] Sent 512815 datagrams [ 3] Server Report: [ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 14.143 ms 413662/512814 (81%) [ 3] 0.0-60.2 sec 1 datagrams received out-of-order }}} '''Ping from InstaGENI ULLafayette VM to InstaGENI GPO VM ''' {{{ 60 packets transmitted, 60 received, 0% packet loss, time 59069ms rtt min/avg/max/mdev = 47.836/48.003/48.070/0.042 ms }}} ------ {{{ #!html Email help@geni.net for GENI support or email me with feedback on this page! }}}