[[PageOutline]]

= GPO US Ignite InstaGENI Confirmation Tests =

For details about the tests in this page, see the '''[wiki:GENIRacksHome/USInstageniRacks/SiteConfirmationTests US Ignite InstaGENI Confirmation Tests]''' page.[[BR]]
For site status test status see the '''[wiki:GENIRacksHome/USIgniteInstageniRacks/ConfirmationTestStatus US Ignite InstaGENI Confirmation Tests Status]''' page.

__Note:__ Omni nick_names for site aggregate used for these tests are:
{{{
usignite-ig=urn:publicid:IDN+research.umich.edu+authority+cm,https://boss.mcv.sdn.uky.edu:12369/protogeni/xmlrpc/am
usignite-ig-of=urn:publicid:IDN+openflow:foam:foam.research.umich.edu+authority+am,https://foam.mcv.sdn.uky.edu:3626/foam/gapi/2
}}}


== IG-CT-1 - Access to New Site VM resources ==
Got Aggregate version, which showed AM API V1, V2, and V3 are supported and V2 is default:
{{{
$ omni.py getversion -a usignite-ig
}}}

The US Ignite InstaGENI version in" 'code_tag':'99a2b1f03656cb665918eebd2b95434a6d3e50f9'" is the same as the other two available InstaGENI site (GPO and Utah):
{{{
IG GPO:         {   'code_tag': '99a2b1f03656cb665918eebd2b95434a6d3e50f9'
IG SITENAME:       {   'code_tag': '99a2b1f03656cb665918eebd2b95434a6d3e50f9',
IG Utah:        {   'code_tag': '99a2b1f03656cb665918eebd2b95434a6d3e50f9'
}}}

Get list of "available" compute resources:
{{{
$ omni.py -a usignite-ig listresources --available -o
}}}

Verified that Advertisement RSpec only includes available resources, as requested:
{{{
$ egrep "node comp|available now" rspec-xxx
}}}

Created a slice:
{{{
$ omni.py createslice IG-CT-1
}}}

Created a 4 VMs sliver using the RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/USIgniteRspecs/IG-CT-1.rspec IG-CT-1.rspec]:
{{{
$ omni.py createsliver -a usignite-ig IG-CT-1 IG-CT-1.rspec
}}}
The following is login information for the sliver:
{{{
$ readyToLogin.py -a usignite-ig IG-CT-1
<...>

}}}

=== Measurements ===

Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth:

'''Iperf US Ignite InstaGENI SITENAME VM-2 to VM-1 (TCP) - TCP window size: 16.0 KB '''

''Collected: 2017-02-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf US Ignite InstaGENI SITENAME VM-2 to the VM-1 (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte '''
{{{

}}}

'''Ping from US Ignite InstaGENI SITENAME VM-2 to the VM-1 '''
{{{

}}}

== IG-CT-2 - Access to New Site bare metal and VM resources ==
Create a slice:
{{{
$ omni.py createslice IG-CT-2
}}}

Created a sliver with one VM and one Raw PC using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/USIgniteRspecs/IG-CT-2.rspec IG-CT-2.rspec] 
{{{
$ omni.py createsliver -a usignite-ig IG-CT-2 IG-CT-2.rspec


}}}

Determined login information:
{{{
$ readyToLogin.py -a usignite-ig IG-CT-2
<...>

}}}


=== Measurements ===

Log into specified host and collect iperf and ping statistics. All measurements are collected over 60 seconds, using default images and default link bandwidth:

'''Iperf US Ignite InstaGENI SITENAME PC to VM (TCP) - TCP window size: 16.0 KB '''

''Collected: 2017-02-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf US Ignite InstaGENI SITENAME PC to the VM (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte '''
{{{

}}}

'''Ping from US Ignite InstaGENI SITENAME PC to VM '''
{{{

}}}


'''Iperf US Ignite InstaGENI SITENAME VM to PC (TCP) - TCP window size: 16.0 KB '''

''Collected: 2017-02-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf US Ignite InstaGENI SITENAME VM to the PC (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte '''
{{{

}}}

'''Ping from US Ignite InstaGENI SITENAME VM to PC '''
{{{

}}}

BELOW NOT PART OF TEST PLAN - MAY Choose to ignore
'''Iperf US Ignite InstaGENI SITENAME PC to PC (TCP) - TCP window size: 16.0 KB '''

Even though not part of this test, ran an experiment with 2 raw pcs to capture performance between dedicated devices.


''Collected: 2013-02-20''

__One Client__
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf US Ignite InstaGENI SITENAME PC to the PC (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte '''
{{{

}}}

'''Ping from US Ignite InstaGENI SITENAME PC to PC '''
{{{

}}}


== IG-CT-3 - Multiple sites experiment  ==

Create a slice:
{{{
$ omni.py createslice IG-CT-3

}}}

Create a sliver with one VM at SITENAME and one VM at GPO connected via a GRE tunnel using RSpec [http://groups.geni.net/geni/browser/trunk/GENIRacks/USIgniteRspecs/IG-CT-3.rspec IG-CT-3.rspec]:
{{{
$ stitcher.py createsliver IG-CT-3 -a usignite-ig IG-CT-3.rspec 

}}}

Determined login information at each SITENAME and GPO aggregate:
{{{
$ readyToLogin.py IG-CT-3 --useSliceAggregates
  ....

}}}

=== Measurements ===

'''Iperf US Ignite InstaGENI GPO VM-2 to SITENAME VM-1 (TCP) - TCP window size: 16.0 KB '''

''Collected: 2017-02-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf US Ignite InstaGENI GPO VM-2 to GPO VM-1 (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte '''
{{{

}}}

'''Ping from US Ignite InstaGENI GPO VM-2 to the GPO VM-1 '''
{{{

}}}


'''Iperf US Ignite InstaGENI SITENAME VM-1 to GPO VM-2 (TCP) - TCP window size: 16.0 KB '''

''Collected: 2017-02-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf US Ignite InstaGENI SITENAME VM-1 to GPO VM-2 (UDP) - 1470 byte datagrams & UDP buffer size: 136 KByte '''
{{{

}}}

'''Ping from US Ignite InstaGENI SITENAME VM-1 to GPO VM-2 '''
{{{

}}}

== IG-CT-5 - Experiment Monitoring ==

=== GMOC Monitoring ===

Reviewed content of the GMOC Monitoring page for [https://gmoc-db.grnoc.iu.edu/protected-gwl/index.pl?method=aggregates aggregates], and found the FOAM aggreg

[[Image(SITENAME-FOAMAggregate.jpg)]]

Active !OpenFlow Slivers:

[[Image(SITENAME-OFSlivers.jpg)]]

List of !OpenFlow Resources in use: 

[[Image(SITENAME-OFResources.jpg)]]

Monitoring shows Aggregate measurement for CPU utilization, Disk Utilization, Network Statistics and OF Datapath and Sliver Statistics:

[[Image(SITENAME-OFMonitoring.jpg)]]

=== GENI Monitoring ===

Checked for site's compute and foam aggregates:

[[Image(SITENAME-genimon-aggregates.jpg)]]

Compute aggregate availability: 

[[Image(SITENAME-genimon-compute.jpg, 60%)]]

FOAM Aggregate availability:

[[Image(SITENAME-genimon-foam.jpg, 60%)]]

External Checks for site aggregates:

[[Image(SITENAME-genimon-ext.jpg, 60%)]]

 No Experiments for External Check Stores - No meso-scale. 


== IG-CT-6 - Administrative Tests ==

Sent request for administrative account to site contact from the [http://groups.geni.net/geni/wiki/GeniAggregate/SITENAMEInstaGENI SITENAME InstaGENI] aggregate page.  Followed instructions at [https://users.emulab.net/trac/protogeni/wiki/RackAdminAccounts Admin Accounts on InstaGeni Racks] page for account request. A local admin account was create and also had to join the ''emulab-ops'' group at https://www.research.umich.edu/joinproject.php3?target_pid=emulab-ops.   Once account was create and membership to emulab-ops was approved proceeded to execute administrative tests.  


{{{
LNM:~$ ssh lnevers@control.research.umich.edu

}}}

Also access the node via the PG Boss alias:
{{{
LNM:~$ ssh boss.research.umich.edu
}}}

Further verified access by ssh from ops.instageni.gpolab.bbn.com to boss.instageni.gpolab.bbn.com, which is usually restricted for non-admin users: 
{{{
LNM:~$ ssh ops.research.umich.edu

}}}
From boss node accessed each of the experiment nodes that support VMs: 
{{{
[lnevers@boss ~]$ for i in pc1 pc2; do ssh $i "echo -n '===> Host: ';hostname;sudo whoami;uname -a;echo"; done

}}}

In order to access Dedicated Nodes some experiment must be running on the raw-pc device. At the time of this capture two raw-pc nodes were in use (pcX and pcY): 
{{{
[lnevers@boss ~]$ sudo ssh pcX
[root@pcX ~]# sudo whoami
root
[root@pcX ~]# exit
logout
Connection to pcX.research.umich.edu
[lnevers@boss ~]$ sudo ssh pcY
[root@pc ~]# sudo whoami
root
[root@pc ~]# 
}}}

Access infrastructure Switches using documented password. First connect to the switch named procurve1 the control network switch: 
{{{
[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
XXXXXXXXX
[lnevers@boss ~]$ telnet procurve1 


}}}

Connect to the switch named procurve2 the dataplane network switch via ssh using the documented password: 
{{{
[lnevers@boss ~]$ sudo more /usr/testbed/etc/switch.pswd
xxxxxxx
[lnevers@boss ~]$ ssh manager@procurve2
}}}

Access the FOAM VM and gather information for version
{{{
LNM:~$ ssh lnevers@foam.research.umich.edu

sudo foamctl admin:get-version  --passwd-file=/etc/foam.passwd 

}}}
Check FOAM configuration for  site.admin.email, geni.site-tag, email.from settings:
{{{
foamctl config:get-value --key="site.admin.email"  --passwd-file=/etc/foam.passwd 

foamctl config:get-value --key="geni.site-tag"  --passwd-file=/etc/foam.passwd 

foamctl config:get-value --key="email.from"  --passwd-file=/etc/foam.passwd 

# check if FOAM auto-approve is on. Value 2 = auto-approve is on.

foamctl config:get-value --key="geni.approval.approve-on-creation"  --passwd-file=/etc/foam.passwd 

}}}

Show FOAM slivers and details for one sliver:

{{{
foamctl geni:list-slivers --passwd-file=/etc/foam.passwd

}}}
Access the FlowVisor VM and gather version information:
{{{

ssh lnevers@flowvisor.research.umich.edu
}}}
Check the !FlowVisor version, list of devices, get details for a device, list of active slices, and details for one of the slices:
{{{     

fvctl --passwd-file=/etc/flowvisor.passwd ping hello

# Devices
fvctl --passwd-file=/etc/flowvisor.passwd listDevices

fvctl --passwd-file=/etc/flowvisor.passwd getDeviceInfo 06:d6:6c:3b:e5:68:00:00

#Slices
fvctl --passwd-file=/etc/flowvisor.passwd listSlices

fvctl --passwd-file=/etc/flowvisor.passwd getSliceInfo 5c956f94-5e05-40b5-948f-34d0149d9182

}}}

Check the FlowVisor setting:
{{{
fvctl --passwd-file=/etc/flowvisor.passwd dumpConfig /tmp/flowvisor-config
more /tmp/flowvisor-config 

}}}

= GPO Stitching Confirmation Tests =

This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page.

== IG-ST-1 New Site to GPO IG topology ==
The SITENAME site advertises the following stitching details:
{{{
}}}

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be  requested.

Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/SITENAME/IG-ST-1.rspec IG-ST-1.rspec]:
{{{
omni.py createslice IG-ST-1
stitcher.py createsliver IG-ST-1 IG-ST-1.rspec -o
}}}

Determined login information at each SITENAME and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-1 --useSliceAggregates 
  ....
}}}

=== Measurements ===

'''Iperf US Ignite InstaGENI GPO VM to InstaGENI SITENAME VM (TCP) - TCP window size: 85.0 KByte (default)'''

''Collected: 2017-02-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf US Ignite InstaGENI GPO VM to InstaGENI SITENAME VM (UDP) - UDP buffer size:  208 kByte (default) '''
{{{

}}}

'''Ping from US Ignite InstaGENI GPO VM to the InstaGENI SITENAME VM '''
{{{

}}}


'''Iperf US Ignite InstaGENI SITENAME VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)'''

''Collected: 2017-02-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf US Ignite InstaGENI SITENAME VM to GPO InstaGENI VM (UDP)  - UDP buffer size:  208 kByte (default) '''
{{{

}}}

'''Ping from US Ignite InstaGENI SITENAME VM to GPO InstaGENI VM '''
{{{

}}}


== IG-ST-2 New Site to GPO IG Loop topology ==

Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/SITENAME/IG-ST-2.rspec IG-ST-2.rspec]:
{{{
omni.py createslice IG-ST-2
stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
}}}

Determined login information at each SITENAME and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-2 --useSliceAggregates
  ....

}}}

Login to GPO host and ping the remote on each of the two interfaces.  Below is the ping output for the GPO site:
{{{
ping 10.10.4.2 -c 60 -q
ping 192.168.4.2 -c 60 -q
}}}

== IG-ST-3 IG-ST-3 New Site 3 node linear topology ==

Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/SITENAME/IG-ST-3.rspec IG-ST-3.rspec]:
{{{
omni.py createslice IG-ST-3
stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
}}}

Determined login information the SITENAME host:
{{{
$ readyToLogin.py IG-ST-3 --useSliceAggregates
  ....
}}}

Login to the SITENAME host and ping each remote: 
{{{
#ping GPO IG 
ping 192.168.2.1 -c 60 -q
# Utah IG
ping 192.168.4.1 -c 60 -q
}}}


== IG-ST-4 New Site to GPO EG interoperability ==


Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/SITENAME/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

{{{
omni.py createslice IG-ST-4
stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o 
}}}

Determined login information at each SITENAME and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-4 --useSliceAggregates
  ....

}}}

=== Measurements ===

'''Iperf ExoGENI GPO VM to US Ignite InstaGENI SITENAME VM (TCP) - TCP window size: 85.0 KByte (default)'''

''Collected: 2017-02-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf ExoGENI GPO VM to US Ignite InstaGENI SITENAME VM (UDP) - UDP buffer size:  208 kByte (default) '''
{{{

}}}

'''Ping from ExoGENI GPO VM to the US Ignite InstaGENI SITENAME VM '''
{{{

}}}


'''Iperf US Ignite InstaGENI SITENAME VM to ExoGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)'''

''Collected: 2017-02-XX''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf US Ignite InstaGENI SITENAME VM to ExoGENI GPO VM (UDP)  - UDP buffer size:  208 kByte (default) '''
{{{

}}}

'''Ping from US Ignite InstaGENI SITENAME VM to ExoGENI GPO VM '''
{{{

}}}

== IG-ST-5 Site Information ==

Various pages include stitching information for a site.  Each of the following were verified for this site:
 
 1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/SITENAMEInstaGENI#GENINetworkStitching SITENAME Aggregate] page.
 
 2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs].

 3. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.

 4. Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites]. 
 
== IG-ST-6 New Site !OpenFlow topology ==

Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/SITENAME/IG-ST-6.rspec IG-ST-6.rspec]:
{{{
omni.py createslice IG-ST-6
stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o
}}}

Determined login information at each SITENAME and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-6 --useSliceAggregates
  ....

}}}

=== Measurements ===

'''Iperf US Ignite InstaGENI GPO VM to InstaGENI SITENAME VM (TCP) - TCP window size: 85.0 KByte (default)'''

''Collected: 2017-02-xx''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf US Ignite InstaGENI GPO VM to InstaGENI SITENAME VM (UDP) - UDP buffer size:  208 kByte (default) '''
{{{

}}}

'''Ping from US Ignite InstaGENI GPO VM to InstaGENI SITENAME VM '''
{{{

}}}


'''Iperf US Ignite InstaGENI SITENAME VM to InstaGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)'''

''Collected: 2017-02-xx''

__One Client_
{{{

}}}

__Five Clients__
{{{

}}}

__Ten Clients__
{{{

}}}

'''Iperf US Ignite InstaGENI SITENAME VM to InstaGENI GPO VM (UDP)  - UDP buffer size:  208 kByte (default) '''
{{{

}}}

'''Ping from US Ignite InstaGENI SITENAME VM to InstaGENI GPO VM '''
{{{

}}}
---
{{{
#!html
Email <a href="mailto:help@geni.net"> help@geni.net </a> for GENI support or email <a href="mailto:luisa.nevers@bbn.com">me</a> with feedback on this page!
}}}