| 1 | [[PageOutline]] |
| 2 | |
| 3 | = Renaissance Computing Institute Operational Data = |
| 4 | |
| 5 | This page captures information that is intended for Operators. The goal is to capture site contacts, connectivity, and VLANs. |
| 6 | |
| 7 | == Contacts == |
| 8 | |
| 9 | Site contact information for Renaissance Computing Institute (RENCI or RCI). |
| 10 | Contact Name: Ilia Baldin |
| 11 | |
| 12 | Contact Email: geni-orca-users@googlegroups.com |
| 13 | |
| 14 | ----- |
| 15 | == Data Plane == |
| 16 | |
| 17 | This section captures Data plane information for RENCI detailing site topology, VLAN, Network Providers (I2/Regional) and network address information. Additional site which is not specified, but deemed important, can also be captured here. |
| 18 | |
| 19 | === Data plane connectivity diagram === |
| 20 | |
| 21 | Provide a diagram that captures device, ports and VLAN information at ingress and egress for transport network. For non-OF connections provide device names and ports connected to transport network (I2/Regional) and VLAN used for those ports. Diagram should capture campus connections. |
| 22 | |
| 23 | |
| 24 | === Layer 2 information === |
| 25 | |
| 26 | Provide layer 2 information for Circuits VLANs, plus network connection end-points, and purpose of VLAN. |
| 27 | |
| 28 | *''In the VLAN column, a single ID indicates that the port is an access port. A T followed by one or more IDs indicates that the port is a trunk (aka tagged) port with those VLAN IDs.'' |
| 29 | |
| 30 | ==== Rack Data Plane Switch ==== |
| 31 | ||'''Port'''||'''Connects To'''||'''VLAN Config*'''|| |
| 32 | |
| 33 | |
| 34 | === Layer 3 information === |
| 35 | If applicable, provide layer 3 information. If not applicable, replace with "none". |
| 36 | |
| 37 | === Experimental VLANs === |
| 38 | Provide a table of Experimental VLAN detailing VLAN numbers, the endpoints, its purposes and whether VLAN is OF or non-OF. |
| 39 | |
| 40 | ||'''VLAN ID'''||'''OF Controlled?'''||'''Purpose''' || |
| 41 | |
| 42 | === VLAN Translation Table === |
| 43 | NONE |
| 44 | |
| 45 | === Non-VLAN Connections === |
| 46 | |
| 47 | The RENCI EG rack has IPv4 connectivity out to an R&E network through VLAN 907 in the rack's data plane. IPv4 IPs are assigned through DHCP. |
| 48 | |
| 49 | === Campus Connections === |
| 50 | NONE |
| 51 | |
| 52 | == Public Internet == |
| 53 | NOT APPLICABLE |
| 54 | |
| 55 | ----- |
| 56 | |
| 57 | == Control Plane == |
| 58 | This section captures Control plane information for RENCI detailing topology and network address information. Additional site which is not specified, but deemed important, can also be captured here. |
| 59 | |
| 60 | === Control plane connectivity diagram === |
| 61 | |
| 62 | |
| 63 | === Resource control subnets === |
| 64 | * IP: |
| 65 | |
| 66 | === Firewall/IP tables === |
| 67 | No firewalls are in place, but there are access lists. To make requests for additional access, please contact the operational contact for this aggregate listed at the top of this page. |
| 68 | |
| 69 | ----- |
| 70 | == Experiment Resources == |
| 71 | |
| 72 | Links to resource and network aggregates available for experimenters for RENCI: |
| 73 | |
| 74 | - http://groups.geni.net/geni/wiki/GeniAggregate/RCIExoGENI |
| 75 | - http://groups.geni.net/geni/wiki/GeniAggregate/RCIExoGENIOpenFlow |