Changes between Version 9 and Version 10 of GENIRacksHome/OpenGENIRacks/OpenGENIUserCheckList


Ignore:
Timestamp:
05/23/14 22:53:49 (10 years ago)
Author:
rrhain@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GENIRacksHome/OpenGENIRacks/OpenGENIUserCheckList

    v9 v10  
    33Connection between OpenFlow switches should ideally appear like layer 1 connections to the experimenters. This can be accomplished in various ways including using dedicated fiber, existing pseudo-wire technologies, OF switches to pass traffic, or applying special configurations to traditional layer 2 VLANs such as disabling mac learning and STP.
    44
    5 * Does your site require any additional hardware or support in preparing your network environment for hosting a GENI rack?[[BR]]
    6 * Do you need an additional transceiver to connect the 10Gb uplink connection from the rack to your network?
     5 * Does your site require any additional hardware or support in preparing your network environment for hosting a GENI rack?
     6 * Do you need an additional transceiver to connect the 10Gb uplink connection from the rack to your network?
    77
    88
     
    1616Hostname:[[BR]]
    1717
    18 * What is a unique name for your location? (Example: USC-Spartburg; USC-Columbia)[[BR]]
    19 * How do we check conflicts?[[BR]]
    20 * Use this information to generate a unique identifier for GENI.[[BR]]
     18 * What is a unique name for your location? (Example: USC-Spartburg; USC-Columbia)[[BR]]
     19 * How do we check conflicts?[[BR]]
     20 * Use this information to generate a unique identifier for GENI.[[BR]]
    2121     *  Ie: <company>-<location>-<function>-<number>
    2222     *  Clemson-main-ctrl-1, Clemson-main-comp-1,etc
    23 * Generated by integrator based on customer. Information given to customer after they purchase the unit.[[BR]]
    24 * Tracked by integrator so if 2nd order is placed we know which number to start off on.[[BR]]
     23 * Generated by integrator based on customer. Information given to customer after they purchase the unit.[[BR]]
     24 * Tracked by integrator so if 2nd order is placed we know which number to start off on.[[BR]]
    2525
    2626==== GRAM software ====
    2727
    2828Range and subnet of public IP addresses for virtual machines:
    29 * Define a range of contiguous IP addresses to be assigned to the Virtual Machines.
    30 * Start_ip  to end_ip must be a contiguous block of ip addresses not in use. There must be at least one, e.g.. 130.127.39.130 - 130.127.39.131.
     29 * Define a range of contiguous IP addresses to be assigned to the Virtual Machines.
     30 * Start_ip  to end_ip must be a contiguous block of ip addresses not in use. There must be at least one, e.g.. 130.127.39.130 - 130.127.39.131.
    3131
    3232VLAN information for external plane:
    33 * Provide the external plane VLAN number for your site.
    34   * Needed for switch configuration
     33 * Provide the external plane VLAN number for your site.
     34   * Needed for switch configuration
    3535
    3636
     
    3838
    3939Assign the following for the control node attached to the system. (DHCP is not recommended as a change in IP address can disrupt the software utilized by GENI)[[BR]]
    40 * Static IP address:_____________
    41 * Subnet: ___________
    42 * Gateway: ___________
    43 * DNS Server: __________
     40 * Static IP address:_____________
     41 * Subnet: ___________
     42 * Gateway: ___________
     43 * DNS Server: __________
    4444
    4545Will the following ports be allowed through your campus/network firewall, to the entire rack subnet: