OG-EXP-3: OpenGENI Single Site 100 VM Test
This page captures status for the test case OG-EXP-3. For additional information see the Acceptance Test Status - May 2013 page overall status, or the OpenGENI Acceptance Test Plan for details about the planned evaluation.
Last Update: 2013/05/20"
| Test Scenario | State | Tickets | Notes |
| Scenario 1: 1 Slice with 100 VMs | |||
| Scenario 2: 2 Slices with 50 VMs each | |||
| Scenario 3: 4 Slices with 25 VMs each | |||
| Scenario 6: 20 Slices with 5 VMs each | Fail | #63 #62 | |
| Scenario 4: 50 Slices with 2 VMs each | Fail | #64 | |
| Scenario 5: 100 Slices with 1 VM each |
| State Legend | Description |
| Pass | Test completed and met all criteria |
| Pass: most criteria | Test completed and met most criteria. Exceptions documented |
| Fail | Test completed and failed to meet criteria. |
| Complete | Test completed but will require re-execution due to expected changes |
| Blocked | Blocked by ticketed issue(s). |
| In Progress | Currently under test. |
Test Plan Steps
This test case uses the following aggregate nick_names:
gram=,https://128.89.91.170:5001
Evaluation Notes: The test "Scenario 4: 50 Slices with 2 VMs each" failed, ticket #64
Scenario 4: 50 Slices with 2 VMs each
Started evaluation with 2 VM slivers and initially started with 10 slices. The following was executed:
COUNT=10
j=1
while [ $j -le $COUNT ];
do
echo Experiment$j
date
omni.py createslice lnslice$j
if [ $? -ne 0 ] ; then
echo "Unable to start the slice"
exit
fi
sleep 4
omni.py -a gram2 -V2 createsliver lnslice$j 2vm-1lan.rspec -o
if [ $? -ne 0 ] ; then
echo "Unable to start the sliver"
exit
fi
sleep 30;
j=`expr $j + 1`
done
The login information for the first 20 VMs:
lnslice1-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3001" username="lnevers"/> lnslice1-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3002" username="lnevers"/> lnslice2-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3005" username="lnevers"/> lnslice2-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3006" username="lnevers"/> lnslice3-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3007" username="lnevers"/> lnslice3-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3008" username="lnevers"/> lnslice4-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3009" username="lnevers"/> lnslice4-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3010" username="lnevers"/> lnslice5-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3011" username="lnevers"/> lnslice5-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3012" username="lnevers"/> lnslice6-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3013" username="lnevers"/> lnslice6-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3014" username="lnevers"/> lnslice7-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3015" username="lnevers"/> lnslice7-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3016" username="lnevers"/> lnslice8-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3017" username="lnevers"/> lnslice8-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3018" username="lnevers"/> lnslice9-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3019" username="lnevers"/> lnslice9-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3020" username="lnevers"/> lnslice10-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3021" username="lnevers"/> lnslice10-manifest-rspec-128-89-91-170-5002.xml: <login authentication="ssh-keys" hostname="boscontroller" port="3022" username="lnevers"/>
Verified ability to login to each of the 20 VMs allocated, by executing "uptime" and ifconfig eth1 via ssh, but found that some hosts did not have addresses:
+ ssh -p 3001 128.89.91.170 uptime; ifconfig eth1
18:30:15 up 1:16, 0 users, load average: 0.00, 0.01, 0.04
eth1 Link encap:Ethernet HWaddr fa:16:3e:c4:4d:94
inet addr:10.0.39.101 Bcast:10.0.39.255 Mask:255.255.255.0
inet6 addr: fe80::f816:3eff:fec4:4d94/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:414 errors:0 dropped:0 overruns:0 frame:0
TX packets:442 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:75280 (75.2 KB) TX bytes:114096 (114.0 KB)
+ ssh -p 3002 128.89.91.170 uptime; ifconfig eth1
18:30:16 up 1:16, 0 users, load average: 0.00, 0.01, 0.03
eth1 Link encap:Ethernet HWaddr fa:16:3e:e2:13:86
inet addr:10.0.39.100 Bcast:10.0.39.255 Mask:255.255.255.0
inet6 addr: fe80::f816:3eff:fee2:1386/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:473 errors:0 dropped:0 overruns:0 frame:0
TX packets:518 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:76868 (76.8 KB) TX bytes:113838 (113.8 KB)
+ ssh -p 3005 128.89.91.170 uptime; ifconfig eth1
18:30:15 up 1:15, 0 users, load average: 0.00, 0.01, 0.04
eth1 Link encap:Ethernet HWaddr fa:16:3e:d6:03:d2
inet addr:10.0.40.101 Bcast:10.0.40.255 Mask:255.255.255.0
inet6 addr: fe80::f816:3eff:fed6:3d2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:454 errors:0 dropped:0 overruns:0 frame:0
TX packets:482 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:76484 (76.4 KB) TX bytes:110016 (110.0 KB)
+ ssh -p 3006 128.89.91.170 uptime; ifconfig eth1
18:30:17 up 1:15, 0 users, load average: 0.00, 0.01, 0.05
eth1 Link encap:Ethernet HWaddr fa:16:3e:4e:f2:af
inet addr:10.0.40.100 Bcast:10.0.40.255 Mask:255.255.255.0
inet6 addr: fe80::f816:3eff:fe4e:f2af/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:371 errors:0 dropped:0 overruns:0 frame:0
TX packets:414 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:67024 (67.0 KB) TX bytes:105420 (105.4 KB)
+ ssh -p 3007 128.89.91.170 uptime; ifconfig eth1
18:30:19 up 1:14, 0 users, load average: 0.08, 0.03, 0.05
eth1 Link encap:Ethernet HWaddr fa:16:3e:fb:94:5f
inet addr:10.0.41.100 Bcast:10.0.41.255 Mask:255.255.255.0
inet6 addr: fe80::f816:3eff:fefb:945f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:410 errors:0 dropped:0 overruns:0 frame:0
TX packets:416 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:75343 (75.3 KB) TX bytes:105804 (105.8 KB)
+ ssh -p 3008 128.89.91.170 uptime; ifconfig eth1
18:30:22 up 1:14, 0 users, load average: 0.00, 0.01, 0.05
eth1 Link encap:Ethernet HWaddr fa:16:3e:19:66:83
inet addr:10.0.41.101 Bcast:10.0.41.255 Mask:255.255.255.0
inet6 addr: fe80::f816:3eff:fe19:6683/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:359 errors:0 dropped:0 overruns:0 frame:0
TX packets:397 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:66844 (66.8 KB) TX bytes:102606 (102.6 KB)
+ ssh -p 3009 128.89.91.170 uptime; ifconfig eth1
18:30:22 up 1:12, 0 users, load average: 0.00, 0.01, 0.04
eth1 Link encap:Ethernet HWaddr fa:16:3e:da:f9:89
inet addr:10.0.42.100 Bcast:10.0.42.255 Mask:255.255.255.0
inet6 addr: fe80::f816:3eff:feda:f989/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:384 errors:0 dropped:0 overruns:0 frame:0
TX packets:408 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:68542 (68.5 KB) TX bytes:103702 (103.7 KB)
+ ssh -p 3010 128.89.91.170 uptime; ifconfig eth1
18:30:25 up 1:12, 0 users, load average: 0.00, 0.01, 0.05
eth1 Link encap:Ethernet HWaddr fa:16:3e:b3:79:32
inet addr:10.0.42.101 Bcast:10.0.42.255 Mask:255.255.255.0
inet6 addr: fe80::f816:3eff:feb3:7932/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:401 errors:0 dropped:0 overruns:0 frame:0
TX packets:454 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:69103 (69.1 KB) TX bytes:108590 (108.5 KB)
+ ssh -p 3011 128.89.91.170 uptime; ifconfig eth1
18:30:26 up 1:11, 0 users, load average: 0.00, 0.01, 0.05
eth1 Link encap:Ethernet HWaddr fa:16:3e:4c:59:84
inet6 addr: fe80::f816:3eff:fe4c:5984/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:476 errors:0 dropped:0 overruns:0 frame:0
TX packets:200 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:141868 (141.8 KB) TX bytes:67632 (67.6 KB)
+ ssh -p 3012 128.89.91.170 uptime; ifconfig eth1
18:30:27 up 1:11, 0 users, load average: 0.00, 0.01, 0.04
eth1 Link encap:Ethernet HWaddr fa:16:3e:b2:ee:25
inet6 addr: fe80::f816:3eff:feb2:ee25/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:452 errors:0 dropped:0 overruns:0 frame:0
TX packets:175 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:137797 (137.7 KB) TX bytes:59082 (59.0 KB)
+ ssh -p 3013 128.89.91.170 uptime; ifconfig eth1
Warning: Permanently added '[128.89.91.170]:3013' (RSA) to the list of known hosts.
18:30:43 up 1:10, 0 users, load average: 0.22, 0.06, 0.06
eth1 Link encap:Ethernet HWaddr fa:16:3e:e2:7a:f5
inet6 addr: fe80::f816:3eff:fee2:7af5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:233 errors:0 dropped:0 overruns:0 frame:0
TX packets:170 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:67110 (67.1 KB) TX bytes:57372 (57.3 KB)
+ ssh -p 3014 128.89.91.170 uptime; ifconfig eth1
18:30:42 up 1:10, 0 users, load average: 0.00, 0.01, 0.03
eth1 Link encap:Ethernet HWaddr fa:16:3e:82:7c:c7
inet6 addr: fe80::f816:3eff:fe82:7cc7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:234 errors:0 dropped:0 overruns:0 frame:0
TX packets:173 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:67722 (67.7 KB) TX bytes:58398 (58.3 KB)
+ ssh -p 3015 128.89.91.170 uptime; ifconfig eth1
18:30:43 up 1:09, 0 users, load average: 0.00, 0.01, 0.04
eth1 Link encap:Ethernet HWaddr fa:16:3e:92:b2:2f
inet6 addr: fe80::f816:3eff:fe92:b22f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:437 errors:0 dropped:0 overruns:0 frame:0
TX packets:173 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:129324 (129.3 KB) TX bytes:58398 (58.3 KB)
+ ssh -p 3016 128.89.91.170 uptime; ifconfig eth1
18:30:43 up 1:08, 0 users, load average: 0.00, 0.01, 0.04
eth1 Link encap:Ethernet HWaddr fa:16:3e:39:d4:61
inet6 addr: fe80::f816:3eff:fe39:d461/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:420 errors:0 dropped:0 overruns:0 frame:0
TX packets:170 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:126758 (126.7 KB) TX bytes:57372 (57.3 KB)
+ ssh -p 3017 128.89.91.170 uptime; ifconfig eth1
18:30:44 up 1:07, 0 users, load average: 0.08, 0.03, 0.03
eth1 Link encap:Ethernet HWaddr fa:16:3e:f6:1d:c3
inet6 addr: fe80::f816:3eff:fef6:1dc3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:248 errors:0 dropped:0 overruns:0 frame:0
TX packets:188 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:72762 (72.7 KB) TX bytes:63528 (63.5 KB)
+ ssh -p 3018 128.89.91.170 uptime; ifconfig eth1
18:30:46 up 1:07, 0 users, load average: 0.08, 0.03, 0.05
eth1 Link encap:Ethernet HWaddr fa:16:3e:3e:f6:da
inet6 addr: fe80::f816:3eff:fe3e:f6da/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:230 errors:0 dropped:0 overruns:0 frame:0
TX packets:167 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:66179 (66.1 KB) TX bytes:56346 (56.3 KB)
+ ssh -p 3019 128.89.91.170 uptime; ifconfig eth1
18:30:48 up 1:06, 0 users, load average: 0.08, 0.03, 0.05
eth1 Link encap:Ethernet HWaddr fa:16:3e:9a:c8:87
inet6 addr: fe80::f816:3eff:fe9a:c887/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:419 errors:0 dropped:0 overruns:0 frame:0
TX packets:159 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:126095 (126.0 KB) TX bytes:53610 (53.6 KB)
+ ssh -p 3020 128.89.91.170 uptime; ifconfig eth1
18:30:52 up 1:06, 0 users, load average: 0.00, 0.01, 0.05
eth1 Link encap:Ethernet HWaddr fa:16:3e:7a:ee:0e
inet6 addr: fe80::f816:3eff:fe7a:ee0e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:405 errors:0 dropped:0 overruns:0 frame:0
TX packets:177 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:124279 (124.2 KB) TX bytes:59766 (59.7 KB)
+ ssh -p 3021 128.89.91.170 uptime; ifconfig eth1
18:30:52 up 1:05, 0 users, load average: 0.00, 0.01, 0.04
eth1 Link encap:Ethernet HWaddr fa:16:3e:68:c5:71
inet6 addr: fe80::f816:3eff:fe68:c571/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:209 errors:0 dropped:0 overruns:0 frame:0
TX packets:148 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:59276 (59.2 KB) TX bytes:49848 (49.8 KB)
+ ssh -p 3022 128.89.91.170 uptime; ifconfig eth1
18:30:55 up 1:05, 0 users, load average: 0.00, 0.01, 0.04
eth1 Link encap:Ethernet HWaddr fa:16:3e:5d:05:51
inet6 addr: fe80::f816:3eff:fe5d:551/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:244 errors:0 dropped:0 overruns:0 frame:0
TX packets:178 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:71089 (71.0 KB) TX bytes:60108 (60.1 KB)
Started 10 more sliver (20 VMs), which were allocated properly and logged into each host.
Note: This test case failed, following is a summary of the events witnessed and captured in ticket #64
Scenario 6: 20 Slices with 5 VMs each
Created First sliver with 5 VMs on one LAN, but upon checking login information found that only 2 of the 5 VMs allocate has SSH ports, See ticket #63. This may be relate to ticket#62.
Last modified 10 years ago
Last modified on 05/23/14 14:08:11
