Version 37 (modified by 12 years ago) (diff) | ,
---|
InstaGENI Racks Project
The InstaGENI Racks address the GENI Rack Requirements and follow the process below to deliver experimenter resources:
InstaGENI Design
An InstaGENI Design Document is available. HP also published detailed manufacturing documentation.
In response to the proposed design the following were discussed on the mail list instageni-design@geni.net:
- InstaGENI Use Cases - Nine Use Cases were submitted for discussion in the design review, discussions are captured in this page.
- InstaGENI Open Questions - Page capturing InstaGENI design question discussed at Design meeting and on the mail list.
InstaGENI Links
Acceptance Tests
Although GENI Rack Requirements are the same for each of the GENI rack projects, a separate InstaGENI System Acceptance Test Plan is defined and is also based on the InstaGENI Use Cases.
See the InstaGENI Acceptance Test Status page for test status and issues as the InstaGENI Acceptance Tests are executed.
The InstaGENI Acceptance Test Report will be made available upon project completion, this page will capture all test findings, configurations used, unresolved issues, etc.
Rack Deployment
The GPO works with Campus Engineering and the InstaGENI Rack Team to set up and coordinate testing of the control, OpenFlow, and campus connections, as well as site monitoring. An outline of the GENI Rack Site Installation Steps is available that is a baseline for the InstaGENI site installation.
The GPO also executed InstaGENI New Site Confirmation Tests to validate the introduction of each new InstaGENI site.
See the InstaGENI Confirmation Test Status page for all new InstaGENI sites. This page captures status as sites are deployed and validated for general use by Experimenters. Upon completion of the site confirmation tests, campus engineering will be able to fully manage resources and access monitoring data for their site.
The GPO additionally creates a test slice that run continuously even after the confirmation tests. This slice is part of the Plastic Slices measurements experiment and collects measurement data that can be found <<insert_link_here>>.
Misc/Historical Links
The InstaGENI Aggregate Surveys is a historical page that captures the initial testing completed while the rack solution was first being implemented. Experiments included: a simple 2 node experiment, AM API Acceptance test results and the GPO Development Analysis of the results.
Email help@geni.net for GENI support or email me with feedback on this page!
Attachments (6)
- Racks-project-outline.jpg (63.8 KB) - added by 13 years ago.
- InstaGENI Design Document Rick 2-15(2).pdf (1.4 MB) - added by 13 years ago.
- InstaGENI Network Connections V.2 PDF.pdf (840.9 KB) - added by 13 years ago.
- InstaGENI-net_v2.1.JPG (252.4 KB) - added by 12 years ago.
-
HPL-00293-00-RevB.pdf (984.6 KB) - added by 12 years ago.
InstaGENI Rack Elevation
-
ExampleSiteSurvey.pdf (89.2 KB) - added by 9 years ago.
InstaGENI Example Site Survey