= IG-XN-8: IG Utah Xen to ExoGENI GPO VM with 1 stitched VLAN  =


This test case verifies a topology that requests one IG Utah Xen to one ExoGENI GPO OpenStack VM with 1 stitched VLAN via the Internet2 ION aggregate.  For overall status see the [wiki:GENIRacksHome/InstageniRacks/XenTestStatus InstaGENI Xen Virtualization Test Status] page.

= Test Status =

This section captures the status for each step in the acceptance test plan.
|| '''Test'''               || '''State'''  || ''' Ticket '''  || '''Notes'''   ||
|| IG Utah Xen to EG GPO !OpenStack VM || || || ||


[[BR]]
|| '''State Legend'''                     || '''Description'''                                                    ||
|| [[Color(green,Pass)]]                  || Test completed and met all criteria                                  ||
|| [[Color(#98FB98,Pass: most criteria)]] || Test completed and met most criteria. Exceptions documented          ||
|| [[Color(red,Fail)]]                    || Test completed and failed to meet criteria.                          ||
|| [[Color(yellow,Complete)]]             || Test completed but will require re-execution due to expected changes ||
|| [[Color(orange,Blocked)]]              || Blocked by ticketed issue(s).                                        ||
|| [[Color(#63B8FF,In Progress)]]         || Currently under test.                                                ||
[[BR]]

== Test Execution Details ==

This testing is executed with GENI Clearinghouse Credentials. No assumptions are made.

=== IG Utah Xen to ExoGENI GPO VM with 1 stitched VLAN ===

Using the following RSpec:
{{{
...
  <node client_id="eg-gpo" component_manager_id="urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am">
   <interface client_id="eg-gpo:if0">
      <ip address="192.168.1.1" netmask="255.255.255.0" />
    </interface>
  </node>
  <node client_id="ig-utah" component_manager_id="urn:publicid:IDN+utah.geniracks.net+authority+cm" >
    <sliver_type name="emulab-xen"/>
     <services> <execute command="sudo yum install iperf -y" shell="sh"/> </services>
    <interface client_id="ig-utah:if0">
      <ip address="192.168.1.2" netmask="255.255.255.0" type="ipv4"/>
    </interface>
  </node>
  <link client_id="link-eggpo-igutah">
    <component_manager name="urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am"/>
    <interface_ref client_id="eg-gpo:if0"/>
    <component_manager name="urn:publicid:IDN+utah.geniracks.net+authority+cm"/>
    <interface_ref client_id="ig-utah:if0"/>
  </link>
...
}}}

Created a slice and stitched sliver:
{{{
$ omni.py createslice xen-eg-gpo-ig-utah
14:27:26 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
14:27:26 INFO     omni: Using control framework portal
14:27:28 INFO     omni: Created slice with Name xen-eg-gpo-ig-utah, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+xen-eg-gpo-ig-utah, Expiration 2013-08-19 18:27:27
14:27:28 INFO     omni:  ------------------------------------------------------------
14:27:28 INFO     omni:  Completed createslice:

  Options as run:
		framework: portal
		project: ln-prj

  Args: createslice xen-eg-gpo-ig-utah

  Result Summary: Created slice with Name xen-eg-gpo-ig-utah, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+xen-eg-gpo-ig-utah, Expiration 2013-08-19 18:27:27
 
14:27:28 INFO     omni:  ============================================================

$ stitcher.py createsliver xen-eg-gpo-ig-utah insta-xen-eg-gpo-ig-utah.rspec -o
????
}}}