Version 3 (modified by 9 years ago) (diff) | ,
---|
University of Utah Stitch Aggregate Operational Data
This page captures information that is intended for Operators. The goal is to capture site contacts, connectivity, and VLANs.
Contacts
Site contact information.
Contact Name: Robert Ricci Contact Email: ricci@cs.utah.edu Also instageni-ops@flux.utah.edu
Data Plane
This section captures Data plane information for detailing site topology, VLAN, Network Providers (I2/Regional) and network address information. Additional site which is not specified, but deemed important, can also be captured here.
Data plane connectivity diagram
Port numbers for this drawing have been requested.
Layer 2 information
*In the VLAN column, a single ID indicates that the port is an access port. A T followed by one or more IDs indicates that the port is a trunk (aka tagged) port with those VLAN IDs.
Rack Data Plane 5406
Port | Connects To | VLAN Config* |
A23 | ||
A24 | XXX | vlan XXX |
VLAN 1750, GENI BACKBONE On Ramp: NLR.CHIC Te 7/4
Project based VLANs to XXX
Layer 3 information
NONE
Experimental VLANs
VLAN ID | OF Controlled? | Purpose |
XXX |
VLAN Translation Table
Project based VLAN translations provisioned as needed.
Non-VLAN Connections
NONE
Campus Connections
The "campus" connections actually span several locations associated with the University of Utah, but not on one campus.
L2 5 X GE
Public Internet
via Internet2
Control Plane
This section captures control plane information for Utah-stitch.
Control plane connectivity diagram
Resource control subnets
IP addresses: 192.XXX.XXX.XXX
DNS: XXX
Firewall/IP tables
unknown
Experiment Resources
This aggregate does not currently support OpenFlow.
Links to resource and network aggregates available for experimenters for Utah-stitch:
Attachments (1)
-
utah-topology.jpg (148.3 KB) - added by 9 years ago.
network diagram for Utah
Download all attachments as: .zip